BPEL...... On Alram Branch not throwing error after the set time

Hi,
In SOA 10.1.3.4 BPEL process , i have a asynchronous process which Invokes a Partnerlink and waits in the Recieve Activity. The OnAlarm branch set here waits for 2 hrs, after which the scope throws that Global fault.
I have observed that for some instances, the OnAlarm Branch does not throw error even after about 24 hrs ( though the OnAlarm is set to 2 hrs )
Is this a prodcut defect or something to do with thread level issues ?
Thanks & Regards,
Md Yaqoob.
Edited by: Sam9999 on Oct 6, 2010 5:33 PM

Hi,
We did not talk to Oracle last week, but hope to do so this week via web conference. According to Oracle support, the version and patch level we are on should not have the problem we are encountering. Both the Oracle constant and support have been unable to replicate the error when they attempt to recreate our setup on their own servers.
We can produce this issue 100% of the time, on a server with no load at all. it is a brand new environment for development use to which we have deployed the latest versions of our flows. I have deployed a simple flow containing just a Wait 15 minutes, and any instances in flight when I restart BPEL do not wake-up on time. Very occassionally, instances that previously failed to wake after a restart do wake after subsequent restarts, but that is not 100% of the time.
Hope to conference with Oracle on Wednesday.
Anit

Similar Messages

Why do my Reminders sometimes not alert after the set time?

Why do my Reminders sometimes not alert after the set time? I've tried re-starting repeatedly. I've tried deleting older completed reminders (I only had 300). Is there a fix for this?

You problem sounded rather odd, so I tried to duplicate it in iTunes 11 and I couldn't.
I turned off copy to iTunes media folder when adding to library, then I moved a music track that was not in the iTunes media folder from folder A to folder B and right clicked on it and selected open with iTunes and it played fine. (I have to do it this way as iTunes is not my default player for MP3).
However the consequences of doing this are that you end up with two copies of the track in the library database, the original which can no longer be found as it is not in its original location and the new entry pointing to the correct location which plays OK.
So as far as I can tell, there must be something else going on as I can't dublicate your problem in iTunes 11
You may find this program interesting
iTunes Folder Watch
http://albumbrowser.klarita.net/iTunesFolderWatch.html
If you want an easy time with iTunes it really is easier to let iTunes manage your music in the iTunes media folder. Also it make life a lot easier if you want to move to a new disk or PC as iTunes can tolerate the iTunes media folder being moved as long as you tell it where it is.
Added
I realised that my last experment was not a purchased track.
When I did it with a purchased track, iTunes recognises that it should be in the library database and brings the track up with an exclamation mark next to it. Strangely the track was added to the library with the correct loaction and would play on the secon try.
Odd behaviour, maybe it is something to do with the icloud storage system as iTunes knows you purchased the track.

After installing 10.6, 10.6.8 my iMac will not log out after the prescribed time. How do I fix this?

My iMac will not automatically log off/out after the prescribed time since I have installed Snow Leopard. It will continue to go to, in order at the prescribed times, Screen Saver, Display Sleep, Computer Sleep. But the next step - Automatically Log User Off after xxx minutes no longer functions. Assistance?

Anyone can help?????

How do I run an Apple Script only when the computer is awake at the specified time and NOT upon waking after the specified time?

I've been using Steve Lambert's SelfControl to block myself from certain time-sucking internet sites for a certain period of time every day. I've automated the program launch using an AppleScript that runs based on an iCal alarm, but the problem is that if my computer has been asleep or shut off, the script will run as soon as I wake it up or start it up, and that can be very inconvenient if I'm intending to use my computer not during the hours when I intended to restrict access to such websites.
So, is there any way to schedule an AppleScript to run *only* if the computer is running at the designated time and not upon waking/starting up after the alarm has passed if the computer was asleep/off?
I started investigating launchd, as I understand this is the successor to cron/crontab in OS X Lion, but it appears that launchd has the same behavior I dislike in the iCal alarm approach--the script will run upon waking even if the time when it was supposed to run has already passed...unless there is a way to change this behavior?

The obvious/easy solution would be to add some logic to the script to see what the time is.
If you expect the script to run at, say, 1pm, but the script checks the time and sees that it's 5pm then you can assume the machine was asleep at the time and thefore you can bail out gracefully.
if (hours of (get current date)) = 13 then
-- it's sometime in the 1pm hour...
end if
You can fine-tune the check as much as you like

File not found error after log on to ADF application

Hi
I just took over an ADF application, after clicking on log in button, in the application_log, there is always a login.jspx -- file not found error message, the directory is not even exist. somehow the application had 'registered ' an directory for the login page, common\skin\login.jspx, the actural log in page is under common\login.jspx.
there is a loginfilter.java created and has a entry in web.xml. the login Filter has let httpServerRequest object to know that the login file directory is ..\common\login.jspx
so why the app server would be looking at the wrong directory? how should I do to correct it?
Thanks in advance.

Hi
I just took over an ADF application, after clicking on log in button, in the application_log, there is always a login.jspx -- file not found error message, the directory is not even exist. somehow the application had 'registered ' an directory for the login page, common\skin\login.jspx, the actural log in page is under common\login.jspx.
there is a loginfilter.java created and has a entry in web.xml. the login Filter has let httpServerRequest object to know that the login file directory is ..\common\login.jspx
so why the app server would be looking at the wrong directory? how should I do to correct it?
Thanks in advance.

Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2

Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2. I've erased and reformatted the drive; reconnected Time Machine(it saw it) and began a new backup. The backup starts again but fails before completing with backup drive not found error. I used the 10.7.2 combo update. Any help on how to fix this problem would be appreciated.

Arghhhhhhhhhhhhhhhhhhh!!!!!!
After waiting since October for a fix, I have now upgraded the firmware on the Time Capsule and installed the new Airport Utility, released yesterday, and the situation is even worse.
Up until now, the Airport Utility had an option to disconnect all drives manually and the Time Capsule would then work until the next reboot – a temporary (?) work-around.
Now that option does not exist in the new-look Airport Utility. And the Airport Utility installation can’t be rolled back and the old utility won’t restore.
The sparesbundle is still not accessible. Anyone worked out a work-around in the new environment yet?
I have another Time Machine backup working fine to a trusty old Lacie Drive so erased the one on my Time Capsule to see if that works. I have renamed the Capsule and the Time Capsule Drive. But to build another full backup will take at least two days and I shall be away from tomorrow and am reluctant to leave the Capsule and computer up and running for a week. And I’ll bet the sparsbundle will still be nowhere to be found.
How can Apple screw up so badly when they are to become the richest company in the entire world and – soon – will have more cash in the bank than the entire United States? Can’t they afford someone who really can sort this out? Especially when a Firewire connected hard drive – my trusty and simple LaCie – works fine.
Words, almost, fail me.

"Page not found" error after 5 minutes of see "processing" on the screen

We are using WebLogic 8.1 server and also the WebLogic proxy as our front end. When a user runs a process that takes over 5 minutes using the Proxy URL they receive an IE "Page not found" error after 5 minutes of seeing "processing" on the screen. If they run it on none Proxy URL (directly on WebLogic server) it works fine.
We have looked into the WLIOTimeoutSecs parameter and set in the web.xml for both the HttpClusterServlet and HttpProxyServlet, but this had no affect.
Is there another timeout that controls this 5 minute timeout? It seems if one uses Apache and sets the WLIOTimeoutSecs parameter to a higher number than 300 seconds there is not an issue.
Did this parameter get omitted for the WebLogic Proxy and if so, what does one use?
Thanks,
Jim

Hello George,
Thank you for the quick reply. I will surely try the option suggested by you.
But what i was thinking is that as this is not a Connection Time Out (500) error, instead its a Page Not Found error, it would be Session-Timeout and not Connection Time-Out.
Maybe I should be looking at:
SESSION-TIMEOUT due to kernel:
Kernel parameter: rdisp/gui_auto_logout
Kernel parameter: rdisp/plugin_auto_logout
as per the SAP OSS Note: 705013
But again, I think this Note is pointing to the SICF service and IAC type of iView and not SAP Transaction type iView. Please advice.
Thanks,
Gaurav
Edited by: Gaurav Shah on Dec 4, 2008 9:37 PM
Edited by: Gaurav Shah on Dec 4, 2008 9:42 PM

Help req for check customer table maintenance with XD02 if not throw error

hello ABAP GURUS,
check customer of the table maintenance with XD02 if not throw error i have given the codition for passing the values in the table but before that it has to check whether the customer i am passing in to the table is a customer from xd02.Here whatever no i am passing it is accepting it should not happen, but when i give the customer which is not a customer it should not accept but it has to throw the message as 'customer does not exist.Its urgent please help me
TYPES: BEGIN OF TY_KNVI,
KUNNR TYPE KUNNR,
TATYP TYPE TATYP,
TAXKD TYPE TAKLD,
END OF TY_KNVI.
DATA : VALIDFROM TYPE GUEBG,
VALIDTO TYPE GUEEN.
DATA : IT_KNVI TYPE STANDARD TABLE OF TY_KNVI,
WA_KNVI TYPE TY_KNVI OCCURS 0 WITH HEADER LINE.
DATA : V_NAME TYPE SYUNAME.
SELECT KUNNR
TATYP
TAXKD
FROM KNVI
INTO TABLE WA_KNVI
WHERE KUNNR = YYV_CFORM-KUNNR
AND TATYP = 'ZCST'
AND TAXKD = '1'.
V_NAME = SY-UNAME.
YYV_CFORM-ENTEREDBY = V_NAME.
IF SY-SUBRC NE 0.
MESSAGE E000(E4) WITH 'Please change the tax classification of ZCST as' '1' ', in Sales Area Data'.
ENDIF.
I have used the following code to enter the data into the table maintenance it is working fine and throwing the error when the tax type is not the one which i have given in the select statements but the problem is when i have given the customer no which is not there in the XD02 tcode, it is accepting and showing the error message as MESSAGE E000(E4) WITH 'Please change the tax classification of ZCST as' '1' ', in Sales Area Data'. now i have to check the customer no from XD02 and if it is existing in that tcode it should allow to save in the table maintenance otherwise throw a message as the 'Customer no does not exist, this I am unable to write so how can i check please help me .
thankx in advance.
Edited by: soni khadary on Apr 22, 2008 7:55 AM

Hi Kelly,
I guess <wa_tab>-handle_style is of type lvc_t_styl therefore you can do the following:
ls_edit-style = cl_gui_alv_grid=>mc_style_enabled.
"I assume you know your non-key fields' names so you can use subrotuine to perform update on each of them
ls_edit-fieldname = 'First field name' .
PERFORM update ls_edit.
ls_edit-fieldname = 'Second field name'.
PERFORM update ls_edit.
ls_edit-fieldname = 'Third field name'.
PERFORM update ls_edit
FORM update USING fs_edit type lvc_s_styl.
field-symbols: <style_tab> type lvc_t_styl,
                     <style_wa> type lvc_s_styl.
LOOP AT <tab> ASSIGNING <wa_tab>.
   if e_row = sy-tabix .
     "get you style table
     assign component 'HANDLE_STYLE' of structure <wa_tab> to <style_tab>.
     "as <style_tab> is typed fully you can read the row you are interested in
     read table <style_tab> assigning <style_wa> with key fieldname = fs_edit-fieldname
     if sy-subrc = 0.
       "update this entry
        <style_wa> = fs_edit.
*        modify table <style_tab> from <style_wa>.
     endif.
   endif.
endloop.
endform.
Note!
Though, this should work, the use of RTTI as Uwe suggested would be best practise approach as far as dynamic programming is concerned. Anyhow it is still up to you which one you pick.
Regards
Marcin
I noticed now that this line is not necessary
modify table <style_tab> from <style_wa>.
as we simply are working with field symbols, so changes made to <style_wa> are already visible in that table <style_tab>.
Edited by: Marcin Pciak on Mar 15, 2009 12:44 PM

'CRT not initialized' error after installing MS Office 2010

Hi,
I encountered 'CRT not initialized error' after installing MS Office 2010. I think that with previous version of CVI there were no problems. But, with Labwindows/CVI 2012 error has outbroken. The details are as follows.
- OS : windows 7 Enterprise (32bit)
- Labwindows/CVI (v12.0.0 (422))
- MS Office 2010 (word, powerpoint, excel)
#1. clean install windows 7 (32 bit)
#2. install Labwindows/CVI v12.0.0 and device drivers (DAQ, Motion)
#3. compile and run attached test program : SUCCESS
#4. online update windows 7 (service pack, explorer 9, and etc)
#5. compile and run attached test program : SUCCESS
#6. install MS Office 2010
#7. compile and run attached test program : 'CRT error'
#8. uninstall MS Office 2010
#9. compile and run attached test program : SUCCESS
I think there are some conflicts between office 2010 and labwindows v12.0.0. How can I solve this problem?
Thank you in advance.
Attachments:
step7-CRT error.jpg ‏31 KB
test program.zip ‏3305 KB

More specifically, I decided that some parts of MS Office files and features of NI's motion library conflicts. Because in the attacted sample program, if I exclude NI-Motion functions then the program excutes nicely. But if I include NI-Motion fucntion, for example flex_select_signal, then the 'CRT not initialized' error occurs.
To solve this problem I tried step by step installation check for MS Office 2010. During each step I included more optional features in MS Office and after each installation I compiled and executed my sample program. At finally, I found that the addtional part of MS Office 2010, if I install Office Sharing Function>Microsoft IME(Korean), then the 'CRT not initialized' error occurs.
Temporarly, I solved the problem with NOT installing 'Office Sharing Function>Microsoft IME(Korean)' optional feature in the MS Office 2010.
Could you tell me why this problem occur?

Application is throwing NSAPI and other errors after the migration

We started seeing NSAPI and other errors after the migration of new codes and recently make some changes
1) During the migration, all the 4 WLS cluster instances were bounced simultaneously. What is the best practice and recommendation from BEA Oracle? Do we need to bounce it one by one for any specific reason?
2) we recently introduced the 4th weblogic cluster instance on Solaris 10 zone. All other WLS instances are running on Solaris 8.
Is it okay to have two different OS versions( Solaris 8 and Solaris 10) and different hardware to host WLS cluster instances? Does BEA Oracle support this kind of configuration?
3) We are consistently seeing below errors in the iplanet web server error logs even though site is working fine
[11/Sep/2009:08:53:50] failure ( 4453): for host XX.XX.XX.XX trying to POST /servlet/FSO, wl-proxy reports: exception occurred for backend host 'YY.YY.YY.YY/23120/0': 'CONNECTION_REFUSED [os error=0, line 1732 of URL.cpp]: Error connecting to host YY.YY.YY.YY.YY:23120'
Do we need to upgrade our WLS proxy plugin? . Current version of WLS proxy plug-in is libproxy_61.so. Our Weblogic version is WLS 92 MP2
I'll really appreciate if some can anwsers those questions

OK booted in to Virtualbox, seems too be working fine this way, maybe it is the ATi drivers
any Help would be appreciated

Error Message : Object could not be scheduled within the specified time interval

Post Author: mohamed elkashef
CA Forum: Publishing
Dear All when i try to run event for daily reports it sometimes take generation status failed with this error message : Object could not be scheduled within the specified time interval so i need to know the reason of failure and how can i fix this error thanks a lot

Post Author: nvnaresh
CA Forum: Publishing
Dear jsanzone,
I'm facing the same error even when the server time out is more than the query execution time of the report.By server time out I assume connection time out of WebI report server which I have set to 180 min.But the actual query takes maximum of 5 min.
We are using BO XIR2+SP2.
I scheduled a webI report to get saved in Excel format to an Unmanaged disk location upon a File Event.
We have 3 such reports to be scheduled on the same event.
Expected frequency of File Event getting fired in a day is twice.Scheduling frequency I have set it as every one hour with the file event.
This usually should work fine.
But frequently 1 or 2 of the above 3 instances are getting failed with the following error "Object could not be scheduled with in specified time interval " after being in Running state for few hours(8). Amazingly this is not happening every time. May be once or twice in a week.This works fine after I restart the BO services and the same thing repeats after 3 or 4 days.
Do I need to increase any server parameters?
Why is this happening randomly?

Posting of retirement/transfer not possible (error in the asset)

Dear All,
I have been trying to retire 3 assets by ABAVN. After I try to simulate the posting, it says:
Posting of retirement/transfer not possible (error in the asset)
Message No.465
Diagnosis
An inconsistency was found for the asset 10 during the last recalculate values.
Posting was rejected,
Choose the function recalculate values in the master data maintanance transaction, and remove any inconsistencies.
My question is that what is the asset 10..is it the depreciation area? C's I haven't input 10 assets...only 3.
What is the recalculate values for asset master data maintanance? Is it the depreciation or other input to the asset master?
Thank you.
Emma

Hi,
I checked AFAR and found it would re-valuate 2 assets in 1999 and 2000 for depreciation area 10 (which is the tax depreciation). In 1999, the assets are retired partially. I am checking on the values AFAR calculated and find what happened that made it necessary to re-valuate the assets.
Thank you.
Emma

[svn:fx-trunk] 9284: Fix bug: Spark BasicLayout should throw error/ RTE when setting useVirtualLayout

Revision: 9284
Author:   [email protected]
Date:     2009-08-13 15:33:07 -0700 (Thu, 13 Aug 2009)
Log Message:
Fix bug: Spark BasicLayout should throw error/RTE when setting useVirtualLayout
QE notes: None
Doc notes: None
Bugs: SDK-22211
Reviewer: Hans
Tests run: checkintests, gumbo/core/Group, gumbo/core/DataGroup, gumbo/core/List
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-22211
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/bundles/en_US/layout.properties
    flex/sdk/trunk/frameworks/projects/spark/src/spark/layouts/BasicLayout.as

This bug figures out also when creating a custom spark ComboBox, then trying to programatically update the userProposedSelectedIndex property. The proposed selected index is selected, but does not apply the same skin as when mouse is on rollover or item is selected due to up and down keys.
The issue seems like updating the status of the item renderer to rollover or selected to get the same skin applied.
Please could you attach DropDow nList.as that you edited ?
Thank you so much.

Error submitting tasks: Operation could not be completed within the specified time

I've created a Batch Application and I'm having an issue running a job. Its suppose to synchronize 2 azure blob containers.
In my JobSplitter, I compare 2 azure blob containers and find the files in the first container that need to be copied over to the second one. Just figuring out which files to copy over can take about 5 to 6 minutes the first time this is run depending
on the number of files that need to get copied over.
Once we have the files that need to be copied, we group them into sets and create a task for each set.
The exe that the TaskProcessor runs doesn't do anything just yet. All it does is write the arguments sent to it into a file. Nothing major.
On the last run, about 900 tasks were created. Four of the tasks completed successfully. I can download the output files for them just fine. The next 4 tasks failed with an error.
Looking in the JobLogs, I see this:
The job orchestrator finished
Failed to process job ac8dd4a3-d882-4ec1-847d-48844fa3e1f4: Error submitting tasks: Operation could not be completed
within the specified time. RequestId:27eab612-c8ce-4e4b-8dfb-00e7024c71ec Time:2015-01-29T00:37:03.5943898Z
Has anyone seen this before?
Thanks,
matt

This error is usually a transient error, typically related to an internal storage timeout. We're working on a fix for it.
In the meantime, if you go into the Batch Apps portal, select the failed job and click Reprocess in the command bar, Batch Apps should re-run the failed tasks and the not-run tasks. (Note that the tasks that already succeeded will not be re-run, and
we will not re-run the job splitter to create new tasks.)
Please let us know if you continue to see this problem or if reprocessing the job doesn't work for you.

HT1338 Application "FINDER"not responding,Desktop files disappeared & " also "Trash" not working svn after relaunching several times.

Application "FINDER"not responding,Desktop files disappeared & " also "Trash" not working svn after relaunching several times.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter the name of the crashed application or process (Finder) in the Filter text field. Post the messages from the time of the last crash, if any — the text, please, not a screenshot.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into a message.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

BPEL...... On Alram Branch not throwing error after the set time

Similar Messages

Maybe you are looking for