BPEL used in projects?

I wanted to know whether in your countries of residence you have project utilizing BPEL. In my country there is skepticism on its use while it is not advertised if it has been used at all. Not to mention the fact that if I need to gain experience on BPEL and not projects are using it. Regional offices of Oracle state that projects have been using BPEL but I havent seen any examples. Anyway, I just wanted to know whether you have used it and in what projects.

On which country you talkink about? Mayby you should contact your local Oracle Representative. I known that Oracle does a lot of projects with Oracle Consulting and partners. Here in the Netherlands the demand of SOA skills for projects is huge. We can not find any people. :-)
Marc
http://orasoa.blogspot.com

Similar Messages

Logical component cannot be used in project

HI
after i add logical component in solar_project_admin
i try to check system landscape
and i get error "Logical component SAP_ERP_EHP_ABAP_EHP4 is not used in project (the name of the project)"
i used in 2 different logical component in this project
you now whay?
best regards
Naor

I am receiving this message right now, while conducting prototype testing.
Message no. SOLAR_SPROJECT055 - Logical component Z_CHARM_PT is not used in project CHARM_PT01
I used this logical component in a previous solman project and it worked. Now I have closed that project and am trying to create a new one using the same logical component.
Any help or suggestions are appreciated. Thanks.

Trying to use laf project for the first time

hi all , i need help , please
i am trying to use laf project for the first time as i said , and i want help on
the installation process
step by step please , i am soo junior here
i've just downloaded the zip file as the site said (http://fdtool.free.fr/LAF/doc/implementation.htm)
please go to this url and declare the steps to me
thanks in advance

The Forms Look and Feel Project is not an Oracle product. This product was developed by Francois Degrelle. Francois has posted numerous times in this forum that if you need help with the LAF you have to go to the Oracle Forms Look & Feel Project web site or his PJCs and Java Beans Forum for support.
Craig...

Using ms project 2007 and vba macro to list all the custom fields used in the project?

Hi,Using ms project 2007 vba macro, I would like to be able to list all the custom fields used in the project and their corresponding field names. e.g. let us say I create a calculated duration field and name it "expected duration" and the name
of the field I select is Duration1.
I am trying to write a macro that will list all the used custom fields such as the result would look like:
Duration1 ---> "expected duration"
Text1 ---> "anything"
Flag1 ---> "....."
Number1 ---> "..............."
Can anyone provide me with the solution?
Regards,
Chuck

John,
I found this module, which provides the the list of custom fields used in the project but does not provide the name given to the field. Here below is the module and hope you could help me achieve this by modifying the macro to list the renamed field.
' MSP Checks all Custom Task Fields
Sub checkfields2()
'This macro will check and report out which custom task fields are used
'It requires Project 2002 and above as it relies on the GetField
'and FieldNameToFieldConstant methods which were not introduced until
'2002.
'It does not include resource fields, however it is a simple matter to
'do it by replacing the pjTask constant with pjResource.
'Copyright Jack Dahlgren, Oct. 2004
Dim mycheck As Boolean
Dim myType, usedfields As String
Dim t As Task
Dim ts As Tasks
Dim i, it As Integer
Set ts = ActiveProject.Tasks
usedfields = "Custom Fields used in this file" & vbCrLf
myType = "Text"
usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
For i = 1 To 30
mycheck = False
it = 0
While Not mycheck And (it < ts.Count)
it = it + 1
If Not ts(it) Is Nothing Then
If ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)) <> "" Then
usedfields = usedfields & myType & CStr(i) & vbCr
mycheck = True
End If
End If
Wend
Next i
myType = "Number"
usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
For i = 1 To 20
mycheck = False
it = 0
While Not mycheck And (it < ts.Count)
it = it + 1
If Not ts(it) Is Nothing Then
If ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)) <> 0 Then
usedfields = usedfields & myType & CStr(i) & vbCr
mycheck = True
End If
End If
Wend
Next i
myType = "Duration"
usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
For i = 1 To 10
mycheck = False
it = 0
While Not mycheck And (it < ts.Count)
it = it + 1
If Not ts(it) Is Nothing Then
If Left(ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)), 2) <> "0 " Then
usedfields = usedfields & myType & CStr(i) & vbCr
mycheck = True
End If
End If
Wend
Next i
myType = "Cost"
usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
For i = 1 To 10
mycheck = False
it = 0
While Not mycheck And (it < ts.Count)
it = it + 1
If Not ts(it) Is Nothing Then
If ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)) <> 0 Then
usedfields = usedfields & myType & CStr(i) & vbCr
mycheck = True
End If
End If
Wend
Next i
myType = "Start"
usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
For i = 1 To 10
mycheck = False
it = 0
While Not mycheck And (it < ts.Count)
it = it + 1
If Not ts(it) Is Nothing Then
If ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)) <> "NA" Then
usedfields = usedfields & myType & CStr(i) & vbCr
mycheck = True
End If
End If
Wend
Next i
myType = "Finish"
usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
For i = 1 To 10
mycheck = False
it = 0
While Not mycheck And (it < ts.Count)
it = it + 1
If Not ts(it) Is Nothing Then
If ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)) <> "NA" Then
usedfields = usedfields & myType & CStr(i) & vbCr
mycheck = True
End If
End If
Wend
Next i
MsgBox usedfields
End Sub
This is what the module gives me. But I would like to have beside Text 1 the name that is shown as below. e.g Text1 is "Test".
Would you mind helping me achieve this?
Thanks in advance.
Chuck

How to Set JMS property and Read JMS property in BPEL using JMS adapter

Does any one know how to set or read more than one JMS property in BPEL using JMS adapter. My queue server is Oracle JMS server.
Any help and sample is well appreciated

Hi Van
I have noted that only the attribute "type" is missing. It seems that when you create a "string" property, the attribute "type" is droped from the XML. If you use another type (as "integer" or "double") it stays there.
If you try to read your properties, except for the "type" attribute, you should be successful, as I am. If you need, please tell me your email, I can send you my code.
Source Code:
in ASSIGN activity (process which SENDS the JMS message):
<assign name="TESTES">
<copy>
     <from expression="'string'"/>
     <to variable="HeaderJms" part="outboundHeader"
     query="/ns5:JMSOutboundHeadersAndProperties/ns5:JMSOutboundProperties/ns5:Property[1]/@type"/>
</copy>
<copy>
     <from expression="'name'"/>
     <to variable="HeaderJms" part="outboundHeader"
     query="/ns5:JMSOutboundHeadersAndProperties/ns5:JMSOutboundProperties/ns5:Property[1]/@name"/>
</copy>
<copy>
     <from expression="'value1'"/>
     <to variable="HeaderJms" part="outboundHeader"
     query="/ns5:JMSOutboundHeadersAndProperties/ns5:JMSOutboundProperties/ns5:Property[1]/@value"/>
</copy>
<bpelx:append>
     <bpelx:from>
     <Property name="" type="" value=""
          xmlns="http://xmlns.oracle.com/pcbpel/adapter/jms/"/>
     </bpelx:from>
     <bpelx:to variable="HeaderJms" part="outboundHeader"
          query="/ns5:JMSOutboundHeadersAndProperties/ns5:JMSOutboundProperties"/>
</bpelx:append>
<copy>
     <from expression="'string'"/>
     <to variable="HeaderJms" part="outboundHeader"
     query="/ns5:JMSOutboundHeadersAndProperties/ns5:JMSOutboundProperties/ns5:Property[2]/@type"/>
</copy>
<copy>
     <from expression="'name2'"/>
     <to variable="HeaderJms" part="outboundHeader"
     query="/ns5:JMSOutboundHeadersAndProperties/ns5:JMSOutboundProperties/ns5:Property[2]/@name"/>
</copy>
<copy>
     <from expression="'value2'"/>
     <to variable="HeaderJms" part="outboundHeader"
     query="/ns5:JMSOutboundHeadersAndProperties/ns5:JMSOutboundProperties/ns5:Property[2]/@value"/>
</copy>
</assign>
in ASSIGN activity (process which READS the JMS message)
<assign name="Assign_1">
<copy>
<from variable="Variable_1" part="inboundHeader"
query="/ns3:JMSInboundHeadersAndProperties/ns3:JMSInboundProperties/ns3:Property[10]/@name"/>
<to variable="temp"/>
</copy>
<copy>
<from variable="Variable_1" part="inboundHeader"
query="/ns3:JMSInboundHeadersAndProperties/ns3:JMSInboundProperties/ns3:Property[10]/@value"/>
<to variable="temp"/>
</copy>
<copy>
<from variable="Variable_1" part="inboundHeader"
query="/ns3:JMSInboundHeadersAndProperties/ns3:JMSInboundProperties/ns3:Property[12]/@name"/>
<to variable="temp"/>
</copy>
<copy>
<from variable="Variable_1" part="inboundHeader"
query="/ns3:JMSInboundHeadersAndProperties/ns3:JMSInboundProperties/ns3:Property[12]/@value"/>
<to variable="temp"/>
</copy>
</assign>
Note that I do not try to read the "type" attribute, otherwise it will fail.
Here is the JMS Header Message received:
<inboundHeader>
<JMSInboundHeadersAndProperties xmlns="http://xmlns.oracle.com/pcbpel/adapter/jms/">
<JMSInboundHeaders>
<JMSCorrelationID>
bpel://localhost/pi_lms-c001e/BpelPiAtualizacaoC001E~1.0/3200025-BpInv0-BpSeq1.6-2
</JMSCorrelationID>
<JMSDeliveryMode>2</JMSDeliveryMode>
<JMSExpiration>0</JMSExpiration>
<JMSMessageID>ID:467DFA1FA1ED459EBF37F51F596C3F12</JMSMessageID>
<JMSPriority>4</JMSPriority>
<JMSRedelivered>false</JMSRedelivered>
<JMSType>com.mercurio.lms.integration.c001eip.c001EIntegrationPoint</JMSType>
<JMSTimestamp>1201552046253</JMSTimestamp>
</JMSInboundHeaders>
- <JMSInboundProperties>
<Property name="JMSXDeliveryCount" type="integer" value="1"/>
<Property name="JMSXRecvTimestamp" type="long" value="1201552046698"/>
<Property name="JMSXUserID" value="lms_dev_int_v1_user"/>
<Property name="JMS_OracleDeliveryMode" value="2"/>
<Property name="JMS_OracleTimestamp" type="long" value="1201552046253"/>
<Property name="JMS_OracleDelay" type="long" value="0"/>
<Property name="JMSXState" type="integer" value="0"/>
<Property name="IAS_VERSION" value="10.1.3"/>
<Property name="JMS_OracleDeliveryMode" value="2"/>
<Property name="name" value="value1"/> ("type" attribute was droped!!!)
<Property name="JMS_OracleTimestamp" type="long" value="1201552046253"/>
<Property name="name2" value="value2"/> ("type" attribute was droped!!!)
</JMSInboundProperties>
</JMSInboundHeadersAndProperties>
</inboundHeader>
Regards
Marcelo

How can i use the project code instead of project xml?

hello
i use the sessionbean+toplink structure,after i finish the o-r mapping by using the mapping work bench,i generate the project xml file,then in the "session.xml" file,i refer to the project xml,then i can use it from sessionbean.
i hear that if i use the project code instead of project xml file,it will be more performant,is that true?
otherwise,how can i use the project code instead of project xml file?i mean, in "session.xml", i can use the "<project-xml>" tag to refer to the project xml file,then in my session bean,i get the server session by read the "session.xml" file.but if i use the project code,how can i refer it from the "session.xml"?the examples that come with the toplink installation only tell me how can i use the project xml file within the session bean,it don't give me any clue about using the project code in the sesion bean,who can give me a step-by-step instruction and code snippet?
thank you very much?

There is a slight performance gain during session load at startup but there is no difference at runtime. The choice of which to use is dependent upon you build process. Whether it is easier to submit a new version of the class into the comile build process vs an XML file. In most cases it is just a preference of the development team.
When you use the project-class you'll need to generate the source code and compile it into your system. Typically it is packaged with the persistent classes. You may need to configure your environment so that the class-loaders have access to these classes (same for the XML case).
When using the project-class you simply replace the project-xml entry like this:
<project-class>oracle.toplink.demos.employee.relational.EmployeeProject</project-class>
The DTD for the session.xml file is found at <TOPLINK_HOME>\core\sessions_4_5.dtd. It is also in the documentation at:
http://otn.oracle.com/docs/products/ias/doc_library/90200doc_otn/toplink.903/b10064/a-sessio.htm#634246
Doug Clarke
Product Manager
Oracle9iAS TopLink

Import the WSDL file in NWDI 7.2 using EJB Project

Hi Experts,
This is my Requirement:
I have WSDL File and it is working in the Portal.I have checked in the WSNavigator.
Now i need to import the WSDL file in NWDI 7.2 using EJB Project.
Please let me know the steps to import the WSDL File.
Thanks & Regards,
SatheshKumar R

Hi
Please look at this documents for that
[How to Develop an Enterprise Service Provider for SAP|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90d95d37-3f65-2a10-8fa9-a13738c93ea7?quicklink=index&overridelayout=true]
http://help.sap.com/saphelp_nwce10/helpdata/en/46/7f2fef88190ad3e10000000a11466f/content.htm
Hope this helps!!
Thanks & Regards
Vijay K
Edited by: VijaySAPEP on Sep 13, 2011 11:34 AM

Using Eclipse project definitions to build the Flex SDK

It would be great if someone from Adobe could post on the recommended usage of the Eclipse project definitions in the development/eclipse/ subdirectory of the 3.0.x trunk distribution. I would like to debug some compiler modifications that I am working on.
I saw Peter Farland demo this setup at 360Flex, but was unable to capture all the details of the Eclipse configuration that he discussed in his talk.
thanks!

If you go to the framework project’s properties, there is a section called Flex Library Compiler, you want to use a specific flex sdk (add a new sdk which points to the trunk, and use that) — you are probably building /against/ the wrong sdk, right code, wrong compiler.
- Jono
From: Ben Clinkinbeard <[email protected]>
Reply-To: <[email protected]>
Date: Thu, 3 Apr 2008 12:56:01 -0700
To: <[email protected]>
Subject: Re: Using Eclipse project definitions to build the Flex SDK
A new message was posted by Ben Clinkinbeard in
Developers --
  Using Eclipse project definitions to build the Flex SDK
Sorry, I'm not following. My SDK project is from the trunk.
Thanks,
Ben
On Thu, Apr 3, 2008 at 3:32 PM, Jono Spiro <[email protected]> wrote:
A new message was posted by Jono Spiro in
Developers --
  Using Eclipse project definitions to build the Flex SDK
Try changing the sdk for the framework lib project to trunk (you'll need to add a new flex sdk, name it whatever you want) -- it's in the project properties. It's using the wrong compiler.
- Jono
From: Ben Clinkinbeard <[email protected]>
Reply-To: <[email protected]>
Date: Thu, 3 Apr 2008 05:13:43 -0700
To: <[email protected]>
Subject: Re: Using Eclipse project definitions to build the Flex SDK
A new message was posted by Ben Clinkinbeard in
Developers --
  Using Eclipse project definitions to build the Flex SDK
I am running FB on top of Eclipse 3.3.2.
<http://3.3.2.> <
<http://3.3.2.>
http://3.3.2.> I checked out the whole SDK trunk and can build the main ant task with no errors. I used the instructions mentioned above to create a Flex framework library project and thats where the error comes in. (I had tried to manually build a framework project a few times and it was a nightmare.) I would probably prefer to work on the 3.0.x branch/tag as I hope to submit a patch or two but saw Joe mention that the project defs only existed in the trunk.
Searching Google for the oem error turns up lots of links about projects that had assets deleted and the build got confused but following the instructions on how to fix proved unsuccessful.
Thanks,
Ben
On Thu, Apr 3, 2008 at 1:45 AM, Jono Spiro <[email protected]> wrote:
A new message was posted by Jono Spiro in
Developers --
  Using Eclipse project definitions to build the Flex SDK
I always forget what that error means when it comes up -- though it's been ages since I've seen it last, literally.
Joe: Since you mention Java 1.5, I'm guessing the errors are in the asdoc package? Those should be turned off (read: turned into a warning) -- Eclipse is a little too persnickety about that particular error. There's a preference for this in the Java section under warnings and errors. It's turned off in the trunk dev projects. Otherwise, you should be able to run the compiler directly with no problems (okay, one more caveat: there's a class loader issue with the OEM, fixed in trunk if you look for my Java 1.5 checkin).
Ben: What is your setup? What are you building (Ryan mentions trunk, Joe mentions 30x), which Eclipse, which dev projects, did you build the sdk from the commandline first, etc.?
Cheers,
Jono
View/reply at Using Eclipse project definitions to build the Flex SDK <
<http://www.adobeforums.com/webx?13@@.59b4a9d4/3>
http://www.adobeforums.com/webx?13@@.59b4a9d4/3>
Replies by email are OK.
Use the unsubscribe <
<http://www.adobeforums.com/webx?280@@.59b4a9d4%21folder=.3c060fa3>
http://www.adobeforums.com/webx?280@@.59b4a9d4%21folder=.3c060fa3> form to cancel your email subscription.
View/reply at Using Eclipse project definitions to build the Flex SDK <
<http://www.adobeforums.com/webx?13@@.59b4a9d4/5>
http://www.adobeforums.com/webx?13@@.59b4a9d4/5>
Replies by email are OK.
Use the unsubscribe <
<http://www.adobeforums.com/webx?280@@.59b4a9d4%21folder=.3c060fa3>
http://www.adobeforums.com/webx?280@@.59b4a9d4!folder=.3c060fa3
<http://www.adobeforums.com/webx?280@@.59b4a9d4%21folder=.3c060fa3> > form to cancel your email subscription.
View/reply at Using Eclipse project definitions to build the Flex SDK
<http://www.adobeforums.com/webx?13@@.59b4a9d4/6>
Replies by email are OK.
Use the unsubscribe
<http://www.adobeforums.com/webx?280@@.59b4a9d4%21folder=.3c060fa3> form to cancel your email subscription.
View/reply at Using Eclipse project definitions to build the Flex SDK
<http://www.adobeforums.com/webx?13@@.59b4a9d4/7>
Replies by email are OK.
Use the unsubscribe
<http://www.adobeforums.com/webx?280@@.59b4a9d4!folder=.3c060fa3> form to cancel your email subscription.

When to use what project type?

Hi,
I am kind of baffled by the use of Flash Project in Flash Builder 4.
Flex Project is for build RIA\Flex applications with a design view available for creating the GUI.
ActionScript projects allow you to program\debug AS3 code and only when you run the application you get a visual feedback.
1) But when will I want to use Flash Projects?
The reason I am asking is that I have a project that currently works by running a main swf file that in turn loads additional swf files (Sorry I can't show you a demo), switching the loaded swf every 30 seconds.
I am leaning to use a Flash Project to manage my project. On the other hand, I could move the entire project to Flex and implement the different swfs as different states of the GUI.
2) What do you think?
Thanks for your help and feedbacks.

You can start reviewing this topic from here
http://help.adobe.com/en_US/flashbuilder/using/WS6f97d7caa66ef6eb1e63e3d11b6c4d0d21-7ffb.h tml#WSbde04e3d3e6474c4-63107a8b12642da83ed-8000
I would also want to add some details about my project that cause me to ponder on what project type to use.
1) My project involves multiple flash\swf files that are loaded during work. I need to manage their creation.
2) All my swfs are loaded as part of a single application that runs in the backgrounds and loads each swf to display different information.
3)I have many as3 files that I use and would also like to manage them properly.
4) I would have liked to manage the project under a cvs project, like you can do with Java, so I don't have to do manual backups.
Any ideas?

Use of Project(CMOD) in exits:

Hi all,
Can anybody tell me what is the exact use of Project in user exits.
Thanks in advance.

hi,
SMOD : for single user .
CMOD: for USER-GROUP.(set of users doing the same task will be kept in one group based on the requirement for the group we will set authorizations.)
thnks,
raji

Drive 2.1 can not connect to our cs3 versioncue server what do I need to use our projects in CS5?

Mac XServe is our CS3 server. Trying to upgrade to CS5 and found out Version Cue is no longer. Read and found the Drive 2.0. It can't seem to connect to my current server. We still have access with one of our CS3 machines. Is there a program I need to get to continue on with our versioning and the ability to use our projects we have? Or do I need to go into every project and export or something to be able to start using CS5? Thank you in advance for any help!!!

sunnovagun!
Hitting the Log Out button in the MobileMe panel worked. I can now connect to both the SnowLeopard and Lion servers just like I used to.
My condition appears to have been slightly different from yours, gmia - the MobileMe on my MBP had the correct info, but hose are not the credentials i use to remote to the two servers. I'm guessing that for some reason ScreenSharing began using my MobileMe credentials instead of what I had saved in the keychains.
Wonder if it had anything to do with the shutdown of the MM servers. That would be odd as using ones apple ID to log into a Mac remotely was new with Lion, and I had the same problem with our SnowLeopard server - which I remote into much more frequently.
Probably didn't hurt though to reboot the entire network...

Can I use Microsoft Project Professional to connect hyperlink a some documents in the server of our company?

Just like the titre,
Can I use Microsoft Project Professional to connect hyperlink to some documents in the server of our company? I want to share some documents not in my computer, which is in the server of our company.

Hello,
Sure you can, right click on required task that relates to the document, at the bottom on that menu you will see "Hyperlink". Click Hyperlink and a new window will open, in the new window in the "address" field type or paste in the web address / file share
address etc. Click OK then you will see a web link appear in the indicator column.
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

Polling messages based on priority in BPEL using JMS adapter

Hi All,
Is it possible to poll the messages based on the priority in BPEL using JMS adapter?
I could set the priority for the messages but while polling it is picking the messages in FIFO(First in First out) order. But I want the messages to be picked on priority.Any help is appreciated.

Do you only want to pick up messeges with a certain priority? So anything larger than say priority 2?
You can try this: Oracle JCA Adapter for JMS - 11g Release 1 (11.1.1.5.0)
Message SelectorThis field is also optional. It filters messages based on header and property information. The message selector rule is a Boolean expression. If the expression is true, then the message is consumed. If the expression is false, then the message is rejected.For example, you can enter logic, such as:
JMSPriority > 3. Based on this, messages with a priority greater than 3 are consumed; all other messages are rejected.
JMSType = 'car' AND color = 'blue' AND weight > 2500
Country in ('UK', 'US', 'France')

What are the advantages of using LabVIEW projects in TestStand, as apposed to just a path to a vi

What are the advantages of using LabVIEW projects in TestStand, as apposed to just a path to a vi ?
I am modifying an existing workspace for a new product, and it seems like more work to add the vi's into a LabVIEW project
does it gain anything in the long run

Hi Rusty,
I wanted to quickly clarify on the integration between TestStand and LabVIEW Projects.
As Jeff mentioned, some of the big benefits of using LabVIEW Projects is to organize code and to namespace them.
For instance if you had a project called "Power Supply" that housed all your power supply code and had a VI in that called "Initialize", and another project called "Temperature Chamber" that also had a VI called "Initialize", both these VIs are namespaced by the project, so there is no longer confusion about which "Initialize" VI is being used.
Now from a TestStand point of view, in prior version of TestStand, we lost some of this benefit because TestStand did not know about TestStand projects and called VIs simply as un-namespaced VIs. However, in TestStand 2010 (released last year, free eval available at ni.com/teststand), we added the ability to (optionally) call VIs within the context of their projects. This means that:
VIs are now namespaced by their project, even when called from TestStand
VIs can use project specific constructs like NI-DAQmx tasks and conditional compilation settings
Note: When creating deployments, the VIs maintain their projects and namespacing, so this benefit holds true for deployments as well.
Additionally, someone had mentioned looking into using lvlibs to namespace your VIs for deployment. Two comments:
With TestStand 2010, this is no longer neccessary since the project itself namespaces the VIs
You might also want to look into LabVIEW Packed Project Libraries, which combined several VIs into a single file. Think of it as a DLL specific to LabVIEW that is as easy to call as normal LabVIEW VIs. TestStand 2010 can call VIs that are exposed by PPLs. In addition, the deployment utility can automatically pack your VIs into PPLs for deployment.
Hope this is helpful!
Jervin Justin
NI TestStand Product Manager

How run reports JDE from BPEL using the Adapter for JD Edwards OneWorld?

Hi,
I need to load on line a lot of invoices from Bpel to JD Edwards using the Adapter for JD Edwards OneWorld (iWay).
Using Business Functions as Web Services it wasn't a not good idea because of this Adapter is poorly constructed and doesn't allow simultaneous loads, a memory leak occurs on JDE server. And to load them invoice by invoice is very slow.
A choice is to use Z tables and load them through schedules, but Bpel loses total control.
I heard that I can run processes reports that enable to extract the data from the Z tables and load them into JDE.
How can I execute reports JD Edwards invoked from BPEL using the Adapter for JD Edwards OneWorld?
Thanks
Francisco

Hi Dario,
BizTalk 2013 R2 (JDE LOB Adapter) is not tested against latest release of JDE EnterpriseOne 9.1.
It only supports with 8.12 and 9.0 version of JDE.
Refer the discussion here:
Integrating BizTalk with JDE EnterpriseOne
Rachit
Please mark as answer or vote as helpful if my reply does

BPEL used in projects?

Similar Messages

Maybe you are looking for