BPF: Review step not showing up
Hello,
We are running SAP BPC 5.0.505
When defining a BPF, we checked enable reviewers. Now when BPF step is complete "Review required" is showing next to it.
But the reviewer does not get two Reject/Accept radio buttons.
I remember being able to set reviewer steps before in SP3. Is this a new bug in SP4?
BTW, I used AppShell to set a test BPF with reviewer and wasn't able to get it to work either.
Thanks,
Roman
It is a bug in SP4. SP5 fixed it
Similar Messages
-
Link in User Decision step not showing correctly in UWL
Hi SAP Experts,
I have a requirement to add a link in a user decision step, this link triggers a custom webdynpro for additional input. When I access the workitem from Business Workplace, the link is showing fine. But when I execute the workitem in UWL, the link is not displayed, instead the code is shown (<a>...</a>). Please advise on what I should do to have the link working. Thanks in advance.Hi,
This same thing was just recently discussed. I just cannot find the thread anymore (well, in that thread there was not really any solution). Basically the hyperlinks in work item do not seem to work in UWL as they should. I don't know if there are any way to make them work. My suggestion is to not use the hyperlink at all and replace that with an action (=button) to the task in the UWL. This can be achieve quite easily by simple XML configuration in portal. If you have worked with UWL this should be quite straightforward for you, or if there is a consultant at the site, who is familiar with UWL, this should be simple for him/her.
Regards,
Karri -
ITunes Album Review Stars not showing up with iPad
Using latest (new) iPad, latest iOS. Anyone know what is going on?
When viewing music albums, I can see the average review stars, but individual reviews show up with no stars. When I click "More", they magically show up for a few of the reviews. This happens with ALL albums. This is only true for albums, not music videos, not podcasts, etc. I have tried restarting the device, no luck. My friend reported the same thing on his device (iPad2, I believe). So, is this just some random Apple bug?I've had this same problem a couple times. First time I didn't have a clue as to cause but fixed it by unsyncing all music (removing it from phone) and resyncing it back on. This latest time the miss matched artwork occurred on albums I bought on my iPad and then sync'd to my computer and then to my iPhone. Artwork is fine on the iPad and computer (iTunes 10.0.1.22 on XP machine). Artwork shows as other albums for only new purchased albums from iPad. I haven't had time to do the unsyncing and resyncing but will do it this soon and report in to verify that it worked (or didn't). I'm hoping the artwork the iTunes couldn't find, and I did from various places on the net, will be there when I resync the music.
-
Quiz review images not showing
Hi there
I'm using Captivate 6 and for some reason, when reviewing the quiz, I can't see the 'correct' and 'incorrect' images showing which answers the user got right / wrong.
I've checked the settings and everything appears to be the same as previous projects. Can you tell me if this is a bug or is there something I may be missing?
Cheers
Julie
Update - I think it must have been a little bug. I sorted it now. In case anyone has the same issue what I did was remove the option for users to review the quiz and save the project and close Captivate. Restart Captivate, open the project and then add in the option to review and save. That did the trick.Hi Rod
I'll try that next time if it happens again.
I sorted it now. I did removed the option for users to review the quiz and save the project and close Captivate. Restart Captivate, open the project and then add in the option to review and save. That did the trick.
Cheers
Julie -
Reviewer comments not showing up on my copy
Good morning, all
I've invited a reviewer to an Acrobat.com based review. She's able to open the file via the invitation, make comments, and Publish Comments (successfully, by all indications)
However, I don't see her updated comments on my copy (the _review.pdf version) and Check for New Comments doesn't retrieve her new copies.
I've tried closing and reopening the review copy and the original copy, and I am able to successfully post my comments and retrieve them to my copy as well.
Any ideas?
Thanks!
-Matt
@mattrsullivanGood day Matt,
Are you having this problem with all files or just one? Are any other reviewers exhibiting similar issues for you?
Kind regards,
David
Acrobat Community Manager
Adobe Systems -
Pipeline steps not showing Success indicator
Hi all,
While monitoring messages in the SXMB_MONI, i am getting an error in the pipeline steps. But the previous steps which are exceuted sucessfully, doesn't indicate green success indicator. Can anybody please suggest the possible reason?
Thanks,
KulwantHi ,
Go to SXMB_MONI ......Select the process you are executing and select the tab " display" .... from here you can find out what exactly went wrong in the process
Do let me know if it helped
Regards ,
TJ -
How come Customer Reviews is not showing up on my podcast page on ITUNES?
I have had a podcast listed on I-Tunes for over a month and I don't see the Customer Review area like on other peoples podcasts?
Is there something I didn't check or something?
Is there a place where I can find my I-Tunes statistics ON I-tunes (I have my Feeburner and Libsyn areas but I wanted to know if I Tunes has a place ...)
Thanks
Caelidh
Caelidh Public RadioFor whatever reason, when the podcast had no episodes listed, the Customer Review option was absent. But now that there are episodes there, the option is present:
http://phobos.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=211831726
-S -
Reviews and ratings not showing up
Hi: All of the reviews are not showing up for our podcast. How do I get them to show up and how do I access them all. I know people have reviewed but I do not see their entry. https://itunes.apple.com/us/podcast/recurring-revenue-revolution/id530279018 and I have created an account, but still do not see them all. Thanks for any help.
You could email them at podcasts 'at' apple.com but I seriously don't think you will get a helpful answer. There isn't really anything else you can do except wait and see whether they show up eventually - the Store can be quite slow sometime about updating episodes so the same may well be true about reviews.
-
MW not showing Internet Expenses pre-upgrade tasks
User logins to MW, Selects project from "Select Role" "Engineer", Select category "Prep for Upgrade" from Process Steps. An assigned task/step for that user does not appear. For this particular user it is Category=Prep for Upgrade, Prod Family=Financials and Procurement Task=Internet Expenses Step = Import expense reports into AP. All other steps for this user are appearing fine. Tried unassigning and reassigning, but still does not worked. Assigned task to an additional user and different user can not see it either.
Verified from the Upgrade Guide:
Oracle® Applications
Upgrade Guide
Release 11i to 12.1.1
Part No. E14010-01
page 2-12: Internet Expenses
Perform these tasks only if you are using Oracle Internet Expenses.
Step 1: Import expense reports into Accounts Payable (conditional)
Applies to 11i release level: All
TUMS step key: OIE_IMPORT_INTERCOMPANY_CHECK
Perform this step only if you have intercompany data in Internet Expenses (OIE)
interface records that must be imported into Oracle Payables.
Customer doesn't have intercompany. Should the task be showed anyway or it is ok to be hiidden ?
Thank you,
Danilo.Hi,
thank you for the reply.
Customer doesn't have the have intercompany data in OIE but they want to know why this is not showing, since they think if there is this problem other steps can be affected as well (required steps not showing) and the tool will not be trusted. I am trying to understand why this step is not showing, maybe it is a bug, or something. -
IView Appraisal Document not showing customer process step names.
the iView "Appraisal Document", after pressing the pushbutton to move to the next process step, shows the text
"status changed to 'In Review'" in the info area of the iView.
we have changed the names of the standard process steps using IMG "Define Tabs and Process Configuration for Template"
for instance we renamed "In Review" to "Progress Tracking".
the issue is the iView "Appraisal Document" still shows "status changed to 'In Review'" instead of showing "status changed to 'Progress Tacking'".
note: the names of the steps in the roadmap (on top of the iView) show correctly, it is just that the state transitions "Status changed to..." the names of steps show standard instead of customer steps.
any idea why?
Thanks,
TiberiuHi,
My first advice would be to talk to customer out of this.
As a client using SAP you're using standard software which has predefined 'names' for certain things. The names of appraisal - statuses is one of them.
(I've never seen a client wanting to adopt the names of menu texts in Microsoft Office and personally I don't seen the difference. Of course, it will take some time for the client to get used to the new names but in a year or two, everybody is used to those terms).
If you don't succeed, there's no need to change programs. You'll need to change the values of the standard SAP - domain mentioed before.
Wilfred. -
My ipod touch is not showing in itunes therefore, not syncing. I've gone through the trouble shooting steps about 5 times.
Did you try here:
iOS: Device not recognized in iTunes for Mac OS X
If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
Next try on another computer to help determine if you have an iPod or computer problem. -
This tutorial is a step-by-step tutorial on how to "fix" issues of a new graphics card not appearing in Windows 8.1 Pro, or not appearing (as a device) in Device Manager, or it's not being detected by Windows 8.1.
This is the "second part" of a Step-by-Step Tutorial on how to install AMD Radeon graphics card drivers in Windows 8.1 Pro.
GRAPHICS CARD IS NOT DETECTED AND DOES NOT SHOW UP IN WINDOWS 8.1 DEVICE MANAGER
This problem can appear if the video card is not installed properly in the PCI slot and as a result the card is not detected in device manager. Check the physical connections again, reinsert the card properly in the PCI slot, check the connections (including the power cables going to the video card, and ensure that the fan on the graphics card is spinning and the card does have power and is properly seated/inserted) and then install the drivers from the manufacturer’s website.
If the video card is in fact installed properly, but the problem of the video card not being discovered/found by the operating system persists, then try these following methods below to check if this solves the problem.
Method 1:
First, I would suggest you to run the following Microsoft Fixit to get the problem automatically detected and fixed. This Microsoft "fixit" App checks if the device is currently disabled or turned off or the driver is not installed.
Hardware devices are not working or are not detected in Windows.
http://support.microsoft.com/mats/hardware_device_problems/en-us
Method 2:
Sometimes, some devices in device manager are hidden due to corrupt or missing drivers.
Follow the steps below to show hidden devices in the device manager and troubleshoot accordingly.
Press the Windows key + X
Select Command Prompt (Admin)
Type set devmgr_show_nonpresent_devices=1 and hit enter
Type Start DEVMGMT.MSC and hit enter.
Once in Device Manager hit the View menu and select show hidden devices.
From here, remove each instance of the AMD or Nvidia card you see as well as each unknown device. Exit Device Manager and reinstall the latest drivers you can find for your graphics card.
After you install the drivers, reboot and see if you get any different results.
If the above solved your problems and the Graphics Card is now working and is now being properly detected/displayed in Windows Device Manager:
If your graphics card is now being detected by Windows 8.1 in Device Manager, but has a "yellow exclamation" mark (or video drivers are not found or not properly installed or the device is disabled) then install the latest graphics card drivers and proceed with this Step-by-Step Tutorial on how to install AMD Radeon graphics card drivers in Windows 8.1 Pro.
Method 3:
If methods suggested above does not help, I would recommend you to contact Apple/AMD/NVIDIA to get the latest chipset, BIOS, graphics card drivers installed properly.This tutorial is a step-by-step tutorial on how to "fix" issues of a new graphics card not appearing in Windows 8.1 Pro, or not appearing (as a device) in Device Manager, or it's not being detected by Windows 8.1.
This is the "second part" of a Step-by-Step Tutorial on how to install AMD Radeon graphics card drivers in Windows 8.1 Pro.
GRAPHICS CARD IS NOT DETECTED AND DOES NOT SHOW UP IN WINDOWS 8.1 DEVICE MANAGER
This problem can appear if the video card is not installed properly in the PCI slot and as a result the card is not detected in device manager. Check the physical connections again, reinsert the card properly in the PCI slot, check the connections (including the power cables going to the video card, and ensure that the fan on the graphics card is spinning and the card does have power and is properly seated/inserted) and then install the drivers from the manufacturer’s website.
If the video card is in fact installed properly, but the problem of the video card not being discovered/found by the operating system persists, then try these following methods below to check if this solves the problem.
Method 1:
First, I would suggest you to run the following Microsoft Fixit to get the problem automatically detected and fixed. This Microsoft "fixit" App checks if the device is currently disabled or turned off or the driver is not installed.
Hardware devices are not working or are not detected in Windows.
http://support.microsoft.com/mats/hardware_device_problems/en-us
Method 2:
Sometimes, some devices in device manager are hidden due to corrupt or missing drivers.
Follow the steps below to show hidden devices in the device manager and troubleshoot accordingly.
Press the Windows key + X
Select Command Prompt (Admin)
Type set devmgr_show_nonpresent_devices=1 and hit enter
Type Start DEVMGMT.MSC and hit enter.
Once in Device Manager hit the View menu and select show hidden devices.
From here, remove each instance of the AMD or Nvidia card you see as well as each unknown device. Exit Device Manager and reinstall the latest drivers you can find for your graphics card.
After you install the drivers, reboot and see if you get any different results.
If the above solved your problems and the Graphics Card is now working and is now being properly detected/displayed in Windows Device Manager:
If your graphics card is now being detected by Windows 8.1 in Device Manager, but has a "yellow exclamation" mark (or video drivers are not found or not properly installed or the device is disabled) then install the latest graphics card drivers and proceed with this Step-by-Step Tutorial on how to install AMD Radeon graphics card drivers in Windows 8.1 Pro.
Method 3:
If methods suggested above does not help, I would recommend you to contact Apple/AMD/NVIDIA to get the latest chipset, BIOS, graphics card drivers installed properly. -
Exception is not showing in transformation step in BPM after activating
Hi ,
I want to cancel the process if any mapping error occur in transformation step for that I designed by below steps.
1.Block step ( mentioned exeption)
2. transformation step ( Inside block mentioned block step exception)
3. exception branc inside block
4. contorl step (Cancel process inside exception branch)
after activating the BPM , in transformation step exception is not showing .
How to resolve this issue how
Please help me
Regards2. transformation step ( Inside block mentioned block step exception)
Did you define the Exception Handler properly and also used the same in the Exception Branch? If you do a check in IR for your BPM (F7) do you get any error/ warning messages?
Regards,
Abhishek. -
Adobe Photoshop Elements 12 for Mac does not show up in Applications. Tutorial for editing from iPhoto shows selecting the Adobe software in Applications. Am I missing a step in registering product?
I answered my own question: There's a difference between "download' and "install." Hunt for "install" (1.5 hrs in my case) and line up your passwords, Adobe ID, etc, then install. Took 15 min. The right choice shows up in Applications. Now it's on to figuring out why photo selected for edit in iPhoto does not show up on screen in Elements.
-
My Ipad Air is not showing in my itunes account, after I have gone through all the steps and download all my information from my previous ipad
Did you enable the Side Bar?
Select "Show Side Bar" from the "View" menu of iTunes.
Maybe you are looking for
-
Restating my issue / question... When I send email from this iMac, there is a string of characters assigned. The characters are all the "alpha numeric" characters on the QWERTY key board. This only occurs when email is sent from this iMac. The issue
-
Canon HF10 avchd file will not transfer in Log and Transfer window
Hello- I just installed Final Cut Express 4 on my MacBook (intel core due with 4gigs ram... running snow leopard/ 10.6.1) and I cannot get any video to load in from my Canon Vixia HF10. When using the Log & Transfer window my camera is recognized and
-
[solved] Help to build wmii-hg
Hi all, I'm trying to build the most recent version of wmii from hg repo but experience the following error during compilation cc -o wmii9menu.out wmii9menu.o -lXinerama -lXrender -lX11 -lXrandr -Wl,-O1,--sort-common,--as-needed,-z,relro,--hash-style
-
HT201413 my ipod touch is saying disabled. how can i fix this
my 14yr old son has had his ipod touch for over 4yrs. 2yrs ago he just quit useing it because of his android he had got at that time. its been stored every since,untill 1 week ago when my 7yr old little girl found it as she was snooping through his r
-
I'm having a lot of trouble getting any digital copy to stream through the Videos app on my iPhone 6 Plus (yes, it's updated to the latest software). Some will start and then rebuffer every few minutes/seconds, some will not start at all. I've verifi