BPF Template ID = '0' and Select Instance owner unable to pop up.

Hi Gurus,
I am facing a strange situation, I have configured BPF template and validated it successfully. Next I wanted to create BPF Instance, till Step1 everything is fine but in Step2 : Select Instance owner, The window is not poping out for selection. And the BPF template id is '0'.
Can anybody come up with solution? Thanks in Advance
Regards,
KumarMG
Edited by: KumarMG on Jul 14, 2011 12:40 PM

Resolved.

Similar Messages

BPF Template and BPF Instance

Hi All,
In BPF Template, in the DEFINE STEP REGION CRITERIA,we have given CORPORATE as the Dimension Members (Under Driver Diemension Member Selection) and under Selection formula we have given BAS.
Driver Members Selection Formula
CORPORATE BAS
We have around 30 members as the BASE members of CORPORATE.If i create a BPF Instance for one BAS member, the BPF Template in the Web page is getting opened for all the BAS members.
However i want the BPF Template to be opened only for the BAS Member for which the BPF Instance is created.
In case if i create the BPF instance for COPRPORATE (which is the Parent Member) only and use the BPF Template for other users.will this have any impact elsewhere.
Should i create BPF Instance for all the BAS Members seperately?
Also,What is the role of the BPF Instance owner?
Thanks,
Akash.

Hi.
Regarding the role of BPF instance owner users who have been assigned access to the Business Process Flow (BPF) monitor can see a complete list of processes and display the full set of information available for individual process instances. The BPF instance owner can finalize and reopen steps from the BPF monitor.
The BPF instance owner can also finalize an instance from the monitor. Finalize Process only appears in the BPF monitor when the process is fully complete.
The BPF instance owner can reopen steps from the BPF monitor. They can reopen the step prior to the current active step by choosing Reopen Step.
Hope it helps.
Regards,
Kiran

Error of Owner Property when create a BPF Template in BPC 7.5 Netweawer

Hi Expert
I found this error when I create a BPF Template in BPC 7.5 Version Netweawer . Could you please advise for solve it.
BPF: Validation error; member "AS001" in step "3-Sales Export Plan" has no active owners
BPF: Validation error; member "AS001" in step "3-Sales Export Plan" has no active reviewers
BPF: Validation error; member "A001" in step "1-Assumption " has no active owners
BPF: Validation error; member "A001" in step "1-Assumption " has no active reviewers
BPF: Validation error; member "AS001" in step "2-Production Plan" has no active owners
BPF: Validation error; member "AS001" in step "2-Production Plan" has no active reviewers
BPF: Validation error; drive dimension of Production Plan mismatched to previous step
Thanks for your advise
Suphawat

Hi,
In 2nd step of BPF template creation while defining step you should assign driver dimension by clicking on Define Step Region Criteria and choose owner property from that dimension.
Have you maintained Owner property in Entity dimension.If yes you can choose driver dimension as Entity and owner property as Owner.
Hope it helps..
regards,
Raju

GRANT SELECT to TEMP(by procedure)..... ALL tables and views of OWNER....

hi ,
I want to privelege only Grant SELECT ALL tables,views....
I have written A procedure.....given below....
CREATE OR REPLACE PROCEDURE GRANT_SELECT_ALL_PROC
IS
l_obj VARCHAR2(60);
l_obj_type VARCHAR2(60);
CURSOR Cur_Obj IS
SELECT OBJECT_NAME,OBJECT_TYPE
FROM USER_OBJECTS
WHERE USER ='OWNER';
BEGIN
For i in Cur_Obj Loop
l_obj := i.OBJECT_NAME;
l_obj_type := i.OBJECT_TYPE;
IF l_obj_type IN ('TABLE','VIEW')
THEN
EXECUTE IMMEDIATE 'GRANT SELECT ON' || l_obj ||'TO TEMP’;
ELSIF l_obj_type IN('FUNCTION','PROCEDURE','PACKAGE') THEN
EXECUTE IMMEDIATE 'GRANT EXECUTE ON'|| l_obj ||'TO TEMP’;
END IF;
END LOOP;
END GRANT_SELECT_ALL_PROC;
procedure is working fine.....
OWNER there are some table and views......
But After creation of User name TEMp....
When I m giving GRANT SELECT to TEMP(by procedure)..... ALL tables and views of OWNER....
when I coonecte to TEMP...
Not getting table,view List...
not even data of table or Views.....
can anybdy help me.......advance thanx ...
sanjay

hi ,
I want to privelege only Grant SELECT ALL
tables,views....
have written A procedure.....given below....
CREATE OR REPLACE PROCEDURE GRANT_SELECT_ALL_PROC
IS
l_obj VARCHAR2(60);
l_obj_type VARCHAR2(60);
CURSOR Cur_Obj IS
SELECT OBJECT_NAME,OBJECT_TYPE
FROM USER_OBJECTS
WHERE USER ='OWNER';
BEGIN
For i in Cur_Obj Loop
l_obj := i.OBJECT_NAME;
l_obj_type := i.OBJECT_TYPE;
IF l_obj_type IN ('TABLE','VIEW')
THEN
EXECUTE IMMEDIATE 'GRANT SELECT ON' || l_obj ||'TO
TEMP’;
ELSIF l_obj_type IN('FUNCTION','PROCEDURE','PACKAGE')
THEN
EXECUTE IMMEDIATE 'GRANT EXECUTE ON'|| l_obj ||'TO
TEMP’;
END IF;
END LOOP;
END GRANT_SELECT_ALL_PROC;
procedure is working fine.....
OWNER there are some table and views......
But After creation of User name TEMp....
When I m giving GRANT SELECT to TEMP(by
procedure)..... ALL tables and views of OWNER....
when I coonecte to TEMP...
Not getting table,view List...
not even data of table or Views.....
can anybdy help me.......advance thanx ...
sanjayQuery SELECT * FROM USER_TAB_PRIVS_MADE from the user from which you are executing the procedure
and Query SELECT * FROM USER_TAB_PRIVS_RECD from the TEMP user.

Cannot select different print template without closing and restarting Lightroom 4

If I select an image in the library grid and then open the print module then I can select any of the templates eg 2x2 cells or (1) 8x10 as normal. However, once I've selected that template, if I decide to see what any other template might look like then although the small preview window at the top left previews the cell layout of each different template, the main viewing window does not update. The only way I am able to change the template is by closing Lightroom, restarting and once again selecting a different template - which I then cannot change without closing Lightroom and restarting. Very frustrating. I am using an iMac with Lion 10.7.3 and 12 gb RAM - everything else is working fine. The issue sounds similar to that reported on the beta on http://forums.adobe.com/message/4200783 where a reinstall seems to have helped. I have done a fresh download and re-install of LR4 but this makes no difference.
Can anyone help please?

Hi Jeff
Thanks for responding. When the layout window does not operate then the layout styles sliders will still work and these will update the layout window. Late last night I found a post on
http://feedback.photoshop.com/photoshop_family/topics/lighroom_4_edit_in_print_presets_not _working_properly
which suggests that the problem lies with the imported LR3 user templates and that I should delete all of those, (of which I have many), and re-create them. In investigating this suggestion I have learned that once the layout window has frozen, it does not matter whether I try and select a Lightroom template or a user template, the screen remains frozen - I think that helps with your second question. Even closing and restarting Lightroom generally leaves the layout window frozen.
Thanks

In TCA, what is the difference between Item instance owner and System's own

Hi,
In TCA, what is the difference between Item instance owner and System's owner ?
thanks
siva

...can i make as many iweb websites as i want? ...and as many blogs as i want? ...i have never made one before....
....although, i do have my own small business and i do have a website that i paid a guy to make and also host....(which is a waste of $$$$ in my opinion as i think i can do a better job making one myself through iweb) ....
...anyways, i know it is splitting hairs but what exactly is the diff b/w a blog and a website ....i am under the impression that a blog is just a personal newsletter sort of thing,...?

BPC 75 NW - BPF driver dimension key and description in Data region

Hello All,
In our BPF templates we have used Costctr as our driver dimenion. When we go to My activities to view BPF instances- we only see the Costctr Description in the data region which is the default. In our example- we have muliple cost centers globally with the same description.. so having the key displayed in the step region is critical. Is there a way to specify the key as well?
We are on BPC 75 NW SP07 patch 3.
Any help is appreciated.
Thanks,
Shai

Hi,
"Inherit from Data Region" means - when you open the BPF, you need to specify members for few of the dimensions. These members can be used by specifying "inherit from data region".
For example, if, while opening the BPF, you enter USA for Entity and 2009.Total for Time. If "inherit from data region" is specified for entity dimension, then it will take USA, irrespective of the current view and the fact that the user is owner of some other dimension.
In this case, either you can take it from CV or you can specify the member explicitly while designing the BPF. However, it will not serve your purpose.
When you acces read access to the user for some entity, the user can still view the data. However, he wont be able to send data. So, restricting the view access is not possible in this case.
Hoep this helps.

TWO CRITICAL BUGS: 1) File, "Save Page As" and 2) right-click the picture and select "Save Image As", both do not work at all in Firefox 27, 28, and 29!

Note: capitals are used only to highlight important words.
PLEASE, TAKE THESE COMMENTS ON TWO CRITICAL BUGS VERY SERIOUSLY BECAUSE THE BUGS DESCRIBED BELOW ARE SO CRITICAL THAT I CANNOT USE THE LATEST VERSION OF FIREFOX UNLESS THEY DO NOT APPEAR IN THE LATEST VERSION AND THEREFORE I AM FORCED TO REVERT BACK TO FIREFOX 26.
I have Windows 7 64-bit and Firefox 26. I could not install Firefox 27, 28, and 29 due to the persistent presence of the two critical bugs described below. I have 8 GB of RAM and an Intel quad-core processor and a lot of hard disk space available.
I installed Firefox 27 and then Firefox 28 a while back and these two bugs described below were still present and now I have just checked again with Firefox 29 by installing it and yet again, these two bugs described below are present!! UNBELIEVABLE THAT THESE TWO CRITICAL BUGS ARE STILL PRESENT IN FIREFOX 29 WHEN I CLEARLY INFORMED YOU ABOUT THEM IN THE HELP, SUBMIT LINK OF FIREFOX!!
I am forced to revert to Firefox 26!
First, I use Windows 7 64-bit and I always use Firefox with at least 120 tabs opened. BUT I have 8 GB of RAM, an Intel core i7 quad-core processor and more than 1 TB of hard disk space. Consequently, I do not understand why I would have these two critical bugs.
With Firefox 26, I also have at least 120 tabs opened when I start Firefox and I do not have the two critical bugs described below, therefore I do not believe that the number of tabs is the reason of the two critical bugs that are present in Firefox 27, 28, and 29.
---FIRST CRITICAL BUG:
When I open ANY web page and do File, "Save Page As", the window that is supposed to open to locate the folder where I want to save this web page does NOT open at all, even if I wait a long time to see if it opens.
Same problem happened with Firefox 27, 28, and now 29!! When I reverted back to Firefox 26, this problem did NOT happen anymore!
---SECOND CRITICAL BUG:
When I use Google Images, for instance entering model in the search field of Google Images and then pressing enter.
Then I select any picture, open to a new tab this selected picture, then open a new tab by selecting the option View for this picture. Then right-click the picture and select "Save Image As".
Again, the window that is supposed to open to locate the folder where I want to save this picture does NOT open at all, even if I wait a long time to see if it opens.
Same problem happened with Firefox 27, 28, and now 29!! When I reverted back to Firefox 26, this problem did NOT happen anymore!
---THESE TWO CRITICAL BUGS DO NOT APPEAR WHEN I USE INTERNET EXPLORER 11.
I have no idea if you will be able to reproduce these two critical BUGS but I can assure you that they are not present when I use Firefox 26 and they are present when I use Firefox 27, 28, and 29. More, be aware that I have at least 100 tabs opened but I also have this same number of tabs opened in Firefox 26 and yet I do not experience these two critical bugs when I have Firefox 26!
Once again, these two bugs touch at two vital, critical very basic functions of Firefox and therefore I will NOT be able to use any version above 26 if these two bugs are still present, as they are present in Firefox 27, 28, and now 29!!!
Please, make it a priority to solve these two critical bugs. Thanks.
I did read a post related to the same issues “Firefox stops responding when trying to "save page" or "save image" | Firefox Support Forum | Mozilla Support” at https://support.mozilla.org/en-US/questions/991630?esab=a&as=aaq
I am still reading it again to try to figure out exactly what the person did to make his problems be solved, as the post is not clear at all on what solved the problems!
In any case, all the suggestions proposed in this post do not work and I surely cannot do a system restore when it is obvious that the two bugs do not appear in Internet Explorer.

First, I sent an email to the author of PhotoME to inform him of the serious issues his addon caused with Firefox latest versions.
Now, for those of you who do not have the PhotoME addon and yet experience the same problem that I had and that I described above, I suggest the following strategy.
As PhotoME did cause these problems with Firefox latest versions, I am pretty covinved other addons probably might cause these problems too. Therefore, adopt the following method.
Test one addon at a time to see if this particular addon is behind your Firefox issues like the ones I had.
So, disable one addon only at a time. Then close your Firefox and restart it from scratch and see if you still have your Firefox problems. You must restart the Firefox browser from scratch. If you still have these Firefox problems, re-enable the disabled addon, restart your Firefox (again!) and repeat the same method for every single addon that you have.
Try to be selective by choosing first addons that are more likely to cause your Firefox problems such as not very well-known or not very popular addons (like it was the case for the PhotoME addon).
If this method works or if it does not work, report it on this web page so that others can be helped with your comments.
I hope this method will help you because I was really upset that I had these Firefox problems and I first thought it was the fault of Firefox, only to discover later that this PhotoME addon was the culprit and had caused me such upset.

Old custom templates in Pages 5 .select background item?

I have some custom templates from iWork 09, that worked fine until this pages 5.22 came along.
They are in Word Processing Layout, and also have a separate text box or two.
In Pages 5.22 I can not longer select them, they just appear on the screen as the "Type to enter text' words.
the only way I can select the box is to 'Convert to page layout.
but if i do that, then all the other custom text is deleted, ...a warning is given and other text is gone.
In previous pages, there was an option to 'Select background Item' or a similar entry that allowed me to select these particular text boxes, but in the is new Pages that option is no longer there now the Inspector pane has been changed.
The Arange Tab appears in Page layout, but not in the WP layout...it must have been there before otherwise how else would I have added the text box?
Anyone have any idea how I can make all my old templates usable in this new of Pages
Thanks

In the Template Chooser for Pages ’09, there is a category heading named “My Templates,” and by default, there is a physical folder in the following location called My Templates. You are permitted to create arbitrary folder(s) in this location through File > Save As Template… for perceived organization. However, the Template Chooser, unlike the Finder, does not show these sub-folders in its left-hand navigation panel. Instead, it shows all templates (including sub-folder contents) in one view — thus subverting your practical organizational goal.
<login directory>/Library/Application Support/iWork/Pages/Templates/My Templates
When you are presented with the file dialog during the Save as Template… activity, it defaults to the My Templates folder location. Click the selector that shows My Templates, and choose the next higher Templates folder. Now, you create a new organizational folder here (mine is called Journals), and it will show up separately under the My Templates category heading — and the related templates are not shown in the general My Templates folder item view.
If I were to manually create empty folders in the above Templates folder using Finder, as long as they are empty, Pages will not list them in the Template Chooser.

I purchased a used Mac Mini and the previous owner did not remove their information. How do I do this?

Operating System is Mavericks and I have no discs, etc. I've tried to add a new admin and delete the old one but everything is asking me for the original password, which I don't have.

Before buying a second-hand computer, you should have run Apple Diagnostics or the Apple Hardware Test, whichever is applicable.
The first thing to do after buying the computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. Changes made by Apple over the years have made this seemingly straightforward task very complex.
How you go about it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
1. If you don't own another Mac
a. If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
b. If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received the media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
c. If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
d. Some 2010-2011 models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you can't reinstall 10.6 even from the original media, and Internet Recovery will not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
2. If you do own another Mac
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
3. Partition and install OS X
a. If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
b. Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
c. An unusual problem may arise if all the following conditions apply:
          OS X 10.7 or later was installed by the previous owner
          The startup volume was encrypted with FileVault
          You're booted in Recovery mode (that is, not from a 10.6 installation disc)
In that case, you won't be able to unlock the volume or partition the drive without the FileVault password. Ask for guidance or see this discussion.
d. After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
e. Run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
4. Other issues
a. If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
b. If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
c. When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like.

HT201441 I bought iPhone 4s device from the owner and the previous owner is not present and the device has already been erased, how can I use this device using my Apple ID and iCloud

I bought iPhone 4s device from the owner and the previous owner is not present and the device has already been erased, how can I use this device using my Apple ID and iCloud

Hello adilx
The only way to get passed that and to use that iPhone is to ask the previous owner to remove it from icloud.com in the Find my iPhone section.
Find My iPhone Activation Lock: Removing a device from a previous owner’s account
http://support.apple.com/kb/TS4515
If the previous owner is not present
Make sure the device is powered on and connected to a Wi-Fi or cellular network. Then contact the previous owner and ask them to follow these steps to remove the device from their account:
Sign in to their iCloud account at www.icloud.com/find.
Click All Devices to open a list of devices linked to their account, then select the device to be removed.
Click the Erase button to erase all content and settings from the device. When prompted, don't enter a phone number or message. Click Next until the device is erased.
When the erase is complete, click "Remove from Account" to remove the device from the account.
After the device is erased and removed from the account, you can proceed with the device setup process.
Regards,
-Norm G.

Oracle11g RAC with partitioning and cross instance parallel query problem

I have set up a 300gb TPC-H database using a 4 node RAC environment (8 cpu per node, 16 GB memory, 2 GHz processors) the system is served by 2.5 terabytes of SSD for its IO subsystem managed by a combination of ASM and OCFS2.
When I run a large parallel query (number 9 in the TPCH query set) I get:
ORA-00600: internal error code, arguments [kxfrGraDistNum3],[65535],[4]
with all other arguments blank. There were some reports of this in version 9, but it was supposedly fixed. Has any one seen this behavior or have a work around?
Mike

Good Idea! Why didn't I think of that? Oh yea...I did. Unfortunately TMS CSI is an update only partner type CSI so I cannot submit a SR. The 600 lookup was how I found the old stuff, but it didn't have any 11g references. I hoped maybe someone in the community had encountered this and had a workaround. By the way, the querey looks like so:
select
nation,
o_year,
sum(amount) as sum_profit
from
select
n_name as nation,
extract(year from o_orderdate) as o_year,
l_extendedprice * (1 - l_discount) - ps_supplycost * l_quantity as amount
from
h_part,
h_supplier,
h_lineitem,
h_partsupp,
h_order,
h_nation
where
s_suppkey = l_suppkey
and ps_suppkey = l_suppkey
and ps_partkey = l_partkey
and p_partkey = l_partkey
and o_orderkey = l_orderkey
and s_nationkey = n_nationkey
and p_name like '%spring%'
) as profit
group by
nation,
o_year
order by
nation,
o_year desc;
the other 21 queries, all using the same tables and degrees of paralell and cross instance settings, executed ok.
Mike

Sessions/connections gets hang during update and select operations.

A table with 3 million records, which has customer details data.
Everyday application is executing select and update queries on that table.
Sessions/connections gets hang during update and select operations.
After checking ADDM report, following are the findings:
Please suggest the solutions
Findings and Recommendations
Finding 1: Row Lock Waits
Impact is 145.22 active sessions, 99.77% of total activity.
SQL statements were found waiting for row lock waits.
Recommendation 1: Application Analysis
Estimated benefit is 145.22 active sessions, 99.77% of total activity.
Action
Significant row contention was detected in the TABLE
"AVAYA.AIRTEL_CUSTOMER_MASTER" with object ID 82155. Trace the cause of
row contention in the application logic using the given blocked SQL.
Related Object
Database object with ID 82155.
Rationale
The SQL statement with SQL_ID "974vg65j29pmv" was blocked on row locks.
Related Object
SQL statement with SQL_ID 974vg65j29pmv.
UPDATE AVAYA.AIRTEL_CUSTOMER_MASTER SET PREFERRED_LANGUAGE = :1
WHERE ( AIRTEL_CUSTOMER_MASTER.MSISDN = :2 )
Rationale
The session with ID 50 and serial number 34525 in instance number 1 was
the blocking session responsible for 100% of this recommendation's
benefit.
Symptoms That Led to the Finding:
Wait class "Application" was consuming significant database time.
Impact is 145.22 active sessions, 99.77% of total activity.
Finding 2: Top SQL Statements
Impact is 46.39 active sessions, 31.87% of total activity.
SQL statements consuming significant database time were found. These
statements offer a good opportunity for performance improvement.
Recommendation 1: SQL Tuning
Estimated benefit is 46.39 active sessions, 31.87% of total activity.
Action
Investigate the UPDATE statement with SQL_ID "974vg65j29pmv" for
possible performance improvements. You can supplement the information
given here with an ASH report for this SQL_ID.
Related Object
SQL statement with SQL_ID 974vg65j29pmv.
UPDATE AVAYA.AIRTEL_CUSTOMER_MASTER SET PREFERRED_LANGUAGE = :1
WHERE ( AIRTEL_CUSTOMER_MASTER.MSISDN = :2 )
Rationale
The SQL spent only 0% of its database time on CPU, I/O and Cluster
waits. Therefore, the SQL Tuning Advisor is not applicable in this case.
Look at performance data for the SQL to find potential improvements.
Rationale
Database time for this SQL was divided as follows: 100% for SQL
execution, 0% for parsing, 0% for PL/SQL execution and 0% for Java
execution.
Rationale
SQL statement with SQL_ID "974vg65j29pmv" was executed 212 times and had
an average elapsed time of 2494 seconds.
Rationale
Waiting for event "enq: TX - row lock contention" in wait class
"Application" accounted for 100% of the database time spent in
processing the SQL statement with SQL_ID "974vg65j29pmv".

**addm report **
          ADDM Report for Task 'TASK_7526'
Analysis Period
AWR snapshot range from 5003 to 5004.
Time period starts at 08-JUL-13 11.00.27 AM
Time period ends at 08-JUL-13 12.00.45 PM
Analysis Target
Database 'AVAYADB' with DB ID 2878789264.
Database version 11.2.0.1.0.
ADDM performed an analysis of instance avayadb, numbered 1 and hosted at
NG-LA04AVAYA01.
Activity During the Analysis Period
Total database time was 563062 seconds.
The average number of active sessions was 155.63.
Summary of Findings
   Description         Active Sessions      Recommendations
                       Percent of Activity
1 Row Lock Waits      155.44 | 99.88       1
2 Top SQL Statements 26.67 | 17.14        1
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
          Findings and Recommendations
Finding 1: Row Lock Waits
Impact is 155.4 active sessions, 99.88% of total activity.
SQL statements were found waiting for row lock waits.
   Recommendation 1: Application Analysis
   Estimated benefit is 155.44 active sessions, 99.88% of total activity.
   Action
      Significant row contention was detected in the TABLE
      "AVAYA.AIRTEL_CUSTOMER_MASTER" with object ID 82155. Trace the cause of
      row contention in the application logic using the given blocked SQL.
      Related Object
         Database object with ID 82155.
   Rationale
      The SQL statement with SQL_ID "974vg65j29pmv" was blocked on row locks.
      Related Object
         SQL statement with SQL_ID 974vg65j29pmv.
         UPDATE AVAYA.AIRTEL_CUSTOMER_MASTER SET PREFERRED_LANGUAGE = :1
         WHERE ( AIRTEL_CUSTOMER_MASTER.MSISDN = :2 )
   Rationale
      The session with ID 167 and serial number 6084 in instance number 1 was
      the blocking session responsible for 100% of this recommendation's
      benefit.
   Symptoms That Led to the Finding:
      Wait class "Application" was consuming significant database time.
      Impact is 155.45 active sessions, 99.88% of total activity.
Finding 2: Top SQL Statements
Impact is 26.66 active sessions, 17.14% of total activity.
SQL statements consuming significant database time were found. These
statements offer a good opportunity for performance improvement.
   Recommendation 1: SQL Tuning
   Estimated benefit is 26.67 active sessions, 17.14% of total activity.
   Action
      Investigate the UPDATE statement with SQL_ID "974vg65j29pmv" for
      possible performance improvements. You can supplement the information
      given here with an ASH report for this SQL_ID.
      Related Object
         SQL statement with SQL_ID 974vg65j29pmv.
         UPDATE AVAYA.AIRTEL_CUSTOMER_MASTER SET PREFERRED_LANGUAGE = :1
         WHERE ( AIRTEL_CUSTOMER_MASTER.MSISDN = :2 )
   Rationale
      The SQL spent only 0% of its database time on CPU, I/O and Cluster
      waits. Therefore, the SQL Tuning Advisor is not applicable in this case.
      Look at performance data for the SQL to find potential improvements.
   Rationale
      Database time for this SQL was divided as follows: 100% for SQL
      execution, 0% for parsing, 0% for PL/SQL execution and 0% for Java
      execution.
   Rationale
      SQL statement with SQL_ID "974vg65j29pmv" was executed 707 times and had
      an average elapsed time of 794 seconds.
   Rationale
      Waiting for event "enq: TX - row lock contention" in wait class
      "Application" accounted for 100% of the database time spent in
      processing the SQL statement with SQL_ID "974vg65j29pmv".
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
          Additional Information
Miscellaneous Information
Wait class "Commit" was not consuming significant database time.
Wait class "Concurrency" was not consuming significant database time.
Wait class "Configuration" was not consuming significant database time.
Wait class "Network" was not consuming significant database time.
Wait class "User I/O" was not consuming significant database time.
Session connect and disconnect calls were not consuming significant database
time.
Hard parsing of SQL statements was not consuming significant database time.

Select instance variable

When I create a screenflow, in the pop window of selecting instance variable, it includes many variable (such as: participant, status ...) and the one I created. The tutorial let me set the in and out value to No.
When should I set some of them to Yes?
Edited by: YE on Apr 24, 2009 2:09 PM

Please see this,
Re: statspack report to a file
Adith

Retriveing selected instance in BPM Studio 10.3.1

Hi,
I wanted to capture the selected instances in BPM Studio Workspace using PAPI API.
Using following code
if inst.selected then
     grab inst
     using grabActivity = "GrabEdit";
     route inst
     using activity = "Notify"
end
But inst.selected is giving true even for unselected instances. Is there any way to retrieve selected instances only.
Thanks,

I haven't used the "Selected" feature via PAPI, but I suspect the problem has to do with session affinity between the workspace session and the PAPI session. The "selected" value probably isn't a persisted state stored on the instance.
What use case are you trying to implement? It seems odd that you'd want some agent (PAPI client) watching what is select by in a user workspace session...
Regards,
Mark

BPF Template ID = '0' and Select Instance owner unable to pop up.

Similar Messages

Maybe you are looking for