BPM 10g Does passwd change of BPM Database require redeployment of Engine?

Hi,
We have changed passwds for BPM Schemas. We have updated Weblogic data sources for BPM accordingly.
Is this enough or this will require redeployment of engine?
Regards,
Sam

Hi Sam,
You need to change Directory DB Schema Password through Admin center and Engine DB Schema through Proccess Adminstrator. and then recreate & redeploy Engine ear and other ears.
Regards,
Amit

Similar Messages

OWB version does not change with Oracle database 11.1.0.7 patch

Hi,
This is Kumar and I have just completed applying Oracle database 11.1.0.7 patch (p6890831_111070_Linux-x86-64.zip) on top of Oracle 11.1.0.6 database on RedHat Linux machine. After successful installation, I have issues below statement to check the validity and version of the installed components.
select comp_name, version, status from dba_registry;
I could see all the component's version as 11.1.0.7 except OWB component's version which is still *11.1.0.6.0* and status is VALID
Could you please let me know what went wrong in my installation? or Is this behavior expected one?
Regards,
Kumar

Did you check with Patch inventory ?
You can run the OWB health check script (download from metalink) to the configuration.

Tables are deleted but database size does not change in sql server 2008r2

Hi All,
20GB Tables are deleted in my database but database size does not change and disk size showing same size.

Hi ,
I have ran the Disk usage by Top Tables report and Identified couple of tables with unwanted data for last 5 years. I have deleted the data for the first 3 years and then ran the Disk usage by Top Tables report again. When I compared the report before
and after the data deletion, I have noticed certain facts which is not matching with what I know or learned from experts like you. The following are the points where I am looking for clarification:
1.Reserved (KB) has been reduced. I was expecting the data Reserved (KB) will remain the same after the data deletion.
2. The Data(KB) and Indexes(KB) fields have been reduced as expected. The Unused(KB) field have been increased as expected.
I was expecting the total of Data(KB) and Indexes(KB) field space gained will be equal to the Unused(KB) field gained after deleting the data. But that is not the case. When I deducted(subtracted) the difference in the Reserved(KB)(Difference before
and after data deletion) field from the Total of space gained from the data deletion is equal to the Unused(KB) gained field value.
I am not a SQL expert and not questioning but trying to understand whether we really gain space by deleting data from the tables. Also keen to get the concepts right, but my testing by deleting some records confused me.
Looking ahead to all your expert advice.
Thanks,
Vennayat

Reports who work in BIP 10G does not work in BIP 11G

Hi!
We are in the middle of going from BIP 10G to BIP 11G (latest patch installed the 9 of february). We have used the Upgrade Assistant to migrate the reports from 10G to 11G, about 80-90% are working directly.
But, as always are there some problems. There are 2 major problems I am struggling with for the moment. 1 is long running reports who gets "Connection reset by peer" before the report ends and the more problematic which is this:
[2012-02-27T11:09:50.397+01:00] [bi_server1] [ERROR] [] [oracle.xdo] [tid: 24] [userId: <anonymous>] [ecid: 22bf1318a95b3a18:-528a5dc9:135b0d15f61:-8000-0000000000025a30,0] [APP: bipublisher#11.1.1] XSL error:[[
<Line 80, Column 151>: XML-23002: (Error) internal xpath error
@Line 80 ==> <_G><xsl:if test="sum($G1[(./QADATE02 = current-group()/QADATE02)]/QATRQT) = '0'" xdofo:ctx="3">
[2012-02-27T11:09:50.397+01:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 24] [userId: <anonymous>] [ecid: 22bf1318a95b3a18:-528a5dc9:135b0d15f61:-8000-0000000000025a30,0] [APP: bipublisher#11.1.1] oracle.xdo.XDOException: java.lang.reflect.InvocationTargetException[[
     at oracle.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1205)
     at oracle.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:276)
     at oracle.xdo.template.FOProcessor.createFO(FOProcessor.java:1973)
     at oracle.xdo.template.FOProcessor.generate(FOProcessor.java:1117)
     at oracle.xdo.servlet.RTFCoreProcessor.transform(RTFCoreProcessor.java:124)
     at oracle.xdo.servlet.CoreProcessor.process(CoreProcessor.java:372)
     at oracle.xdo.servlet.CoreProcessor.generateDocument(CoreProcessor.java:93)
     at oracle.xdo.servlet.ReportImpl.renderBodyHTTP(ReportImpl.java:1059)
     at oracle.xdo.servlet.ReportImpl.renderReportBodyHTTP(ReportImpl.java:624)
     at oracle.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:477)
     at oracle.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:447)
     at oracle.xdo.servlet.XDOServlet.doGet(XDOServlet.java:267)
     at oracle.xdo.servlet.XDOServlet.doPost(XDOServlet.java:299)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
     at oracle.xdo.servlet.metadata.track.MostRecentFilter.doFilter(MostRecentFilter.java:65)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
     at oracle.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilter.java:122)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
     at oracle.xdo.servlet.init.InitCheckingFilter.doFilter(InitCheckingFilter.java:64)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
     at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: java.lang.reflect.InvocationTargetException
     at sun.reflect.GeneratedMethodAccessor7820.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at oracle.xdo.common.xml.XSLT10gR1.invokeProcessXSL(XSLT10gR1.java:917)
     at oracle.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:609)
     at oracle.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:328)
     at oracle.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:187)
     at oracle.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1181)
     ... 40 more
Caused by: oracle.xdo11g.xqxp.XQException: XPTY0004
     at oracle.xdo11g.xslt.XSLStylesheet.flushErrors(XSLStylesheet.java:1850)
     at oracle.xdo11g.xslt.XSLStylesheet.execute(XSLStylesheet.java:616)
     at oracle.xdo11g.xslt.XSLStylesheet.execute(XSLStylesheet.java:551)
     at oracle.xdo11g.xslt.XSLProcessor.processXSL(XSLProcessor.java:345)
     at oracle.xdo11g.xslt.XSLProcessor.processXSL(XSLProcessor.java:194)
     at oracle.xdo11g.xslt.XSLProcessor.processXSL(XSLProcessor.java:230)
     at oracle.xdo11g.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:124)
     at sun.reflect.GeneratedMethodAccessor7820.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at oracle.xdo.common.xml.XSLT10gR1.invokeProcessXSL(XSLT10gR1.java:920)
     ... 44 more
Does anyone have the solution for this type of error, we have about 30-40 reports that is behaving like this in BIP 11G but works fine in BIP 10G.
Can we do anything general in the BIP 11G or does we need to find the solution for each report and change in the template?
All ideas are appreciated, thanks,
Anders B

Hi!
Have everyone out there been able to use the upgrade assistant without any problem?
The UA.bat program says everything is ok but the report actually created in BIP 10G does not work in BIP 11G. We are looking for documentation or "findings" of what the problem can be, in a more general way. We are aware of that we probably have to fix this manually, but we dont know what to fix, and it is not so "fun" to be forced to re create all this templates and reports. The datamodell seems for the most of the time works, so we get a working xml source but the creation of the report thru the template dont work.
Best regards,
Anders

Mailbox recipient does not have a mailbox database

For one of our customers we are currently working on a prove of concept to implement on premise exchange servers. The problem mentioned below takes place on test servers.
Server names and mail domain names are changed to generic values.
On our on premise exchange environment we encounter the following problems when emailing to a specific email domain .
Email to the domain companyname.com is placed in to the Unreachable Domain queue with the following error:
Last Error: The mailbox recipient does not have a mailbox database
Queue ID: SERVEREX01\Unreachable
Recipients: [email protected];2;3;The mailbox recipient does not have a mailbox database;1;<No Home Database>
Situation:
Customer uses a local Active Directory which contains all the user accounts and uses Office 365 / Exchange Online to provide these users with a mailbox. SSO between the local AD and O365 is provided by a third party identity provider.
Dirsync is used to sync all user information from the local AD to O365 AD. This also includes the SMTP addresses users have on the Office 365 mailbox. In the local AD this information is saved is the proxyaddress attribute field and synced
to O365. Office 365 uses the following mail domains for customer: companyname.com and companyname.onmicrosoft.com.
Customer wants to use local on premise exchange servers for specific locations and users and doesn’t want to implement a hybrid exchange environment. Therefore we installed an Exchange 2010 Edge server in the DMZ and an Exchange 2013 MBX
/ CAS server in the server network. The Exchange 2013 server is installed in the same Active Directory as the one mentioned above. This environment uses the mail domain @central.companyname.com. The email environment is configured to only accept email for
this domain.
The email environment works fine. It can send and receive email internally and externally. There is only one issue. It’s impossible to send email from the on premise environment to office 365. The other way around (O365 to on premise)
works fine.
When an email is send to a companyname.com email address the exchange 2013 mail server places the email in the Unreachable Domain queue and reports
the following error:
Last Error: The mailbox recipient does not have a mailbox database
Queue ID: SERVEREX01\Unreachable
Recipients: [email protected];2;3;The mailbox recipient does not have a mailbox database;1;<No Home Database>
This is caused by the fact that the @companyname.com email addresses are stored in the active directory exchange uses. We tried to fix this problem to create a internal and external relay domain with the appropriate send connector but
this didn’t help.
When we remove the proxyaddress attribute in the local active directory we are able to send email from the on premise exchange server to Office365. Removing the proxyaddresses is not a solution because these settings will be synced to
Office 365 and users can’t receive email anymore in there cloud mailbox.
It looks like the SMTP Categorizer first looks in active directory if the target email addresses is available. If so it will send the email to this users (but doesn’t have a mailbox server and mailbox database).
Can we configure a working mailflow for email from on premise to Office 365 for @companyname.com addresses?

Hi,
Please try to set the target Address from the on premise AD account in ADSIedit to match the Cloud mailbox address, and then check the result.
In addition, I recommend you post this thread on office 365 forum:
http://community.office365.com/en-us/forums/default.aspx
Hope this helps!
Thanks.
Niko Cheng
TechNet Community Support

Component 0DAT (version A) does not exist in the database

Dear experts
i got this error.
Component 0DAT (version A) does not exist in the database
http://static.flickr.com/20/71394172_655d295b7f_o.jpg
A SAP expert recommended
"Use BC to activate the variable 0DAT from InfoObject 0CALDAY."
but i can't find 0DAT.
http://static.flickr.com/35/71390830_1049df5c3a_o.jpg
my system is
http://static.flickr.com/35/71390831_c837af0b47_o.jpg
Thanks in advance
David.kang
Message was edited by: David Kang
Message was edited by: David Kang

Mentor Eugene,
I guess the issues are related to "Sneak Preview version".
well, instead of creating new 0DAT,
i edited the RSZGLOBV table with 0DAT that i created before.
http://static.flickr.com/20/71437761_de16ddee16_o.jpg
http://static.flickr.com/34/71437760_5236824cc2_o.jpg
so two rows were changed. (from 6 to 4 ).
http://static.flickr.com/34/71437762_ed172b5577_o.jpg
<b> What do you think it is okay ? </b>
Finally, i can get rid of " Component 0DAT (version A) does not exist in the database " message.
therefore i expect everything goes well.
but ..
"Information No texts were maintained in language E for variable 0DAT " comes up.
Refer to the screenshot ( http://static.flickr.com/35/71439173_5c996d2111_o.jpg )
[Query Designer screenshot ]
http://static.flickr.com/34/71440191_b2a96a2ac4_o.jpg
[Material Number Master Data ]
http://static.flickr.com/34/71440190_a827c571ae_o.jpg
[Original Data file ]
http://safariexamples.informit.com/0201703661/IO_MAT_TEXT.csv
http://safariexamples.informit.com/0201703661/IO_MAT_ATTR.csv
mentor Eugene! thanks a lot.
with kind regards
David

Installing xdk PL/SQL 10g in 9.2.0.X database

I don't find documentation for installing xdk PL/SQL 10g in 9.2.0.X database. Do you have some ???

Try changing the order in which the bind-parameters are used, putting all dates last, or first, I can't remember which one worked for us, something like this:
...("update ss_campaign set campaign_name = ?, updated_by = ?, organization_code = ? where campaign_id = ?, start_date = ?, end_date = ?, updated_on = ?");
and then changing the index for the setXXX accordingly. What we saw was that one of the varchar columns got corrupted under some circumstances if we didn't do this. Again, I can't recall if we moved the dates to the beginning or to the end, but one of them did the trick. We could reliably reproduce this in our application but not with a small standalone java app.

Processing changes in Syabse database table

Can someone help me understand best way to process changes on a database table using XI?
I'm crrently doing this using webmethods where webmethods generates a xml document whenever a row is inserted in a database using adapter notification mechanism. Then I can process this document by calling webservice.

Thx Naveen,
e.g. I insert a customer record in Sybase system, I would like that XI interface would insert same customer in SAP or another Database system and this should happen as a result in insert in Sybase table.
Other way I can already achive this is by having XI look in a sybase table periodicaly and see if there are new rows of data added to the table since it last looked and then process those rows accordingly. I don't want to use this approach since it keeps looking at certain intervals and most of the time there won't be anything for it to process. Also when there is something to process, it will not be processed instanteneously but only when XI looks at the table next time around.
This is whole debate about pushing data v/s polling for changes. I would like to push the info at the time data is inserted in sybase table instead of having to poll for it.
appreciate your response.

Change ODBC DatabaseName but it does not change in CRXI R2

I am sitting with a problem where I have my Test Database (BusinessTest) and my Live Database(Business) on the same server. Now the reports was created before i started at the company and they are all showing the Business.TableName if i go to "View SQL Query".
Now i have to do enhancements on the Report and i would like to first use the BusinessTest Database. My problem is that i can not get the "View SQL Query" to show the BusinessTest.TableName no matter what i do.
The setup is as follow
I am using Crystal Reports XI R2 (SP 4).
I connect to the MySQL database using the MySQL ODBC 5.1 Driver
It connects to the Business database (Live)
When i change the ODBC driver it does not change in the "View SQL Query" it still refers to the Business Database.
I also verified the database and still it only looks back to the live one.
I created a new ODBC and made it look to the BusinessTest database and then updated the Datasource Location under the "Set Datasource Location" then verified the database again and still it looks at the Business(Live) database.
What exactly am i missing? Why can i not get to change the datasource location?
Hope Someone can help.
Thanks.

Hello,
Changing the DSN properties does not update the report DB connection info and not recommended to do so. You also need to Set Location using the Database drop down menu option.
Try this: Open up the ODBC Administrator and in the System DSN's change your original DSN back to the test server. Now create a new DSN and point it to the new Server. Open up Crystal Reports Designer, load the report, click on Database menu, Set Location and browse to your new DSN. Clcik on the Update button when you have the old DSN in the report high lighted and then click on the new DSN you just connected to and click the Update button.
Now from the Database drop down menu click on Verify database. You should now be able to run the report and then show SQL to see the new data.
Thank you
Don

This query does not exist in the database in the system

I have created a query, but when I run it, I receive this error:
You have attempted to open query 0DAT from the Query Designer.
However, this query does not exist in the database in the system to which you have made a connection.
Thanks
Joseilton

dear Joseilton,
the variable 0DAT ist not in active version in your system.
Use BC to activate the variable 0DAT from InfoObject 0CALDAY.
or
you have to create it in your system. therefor change the namespye to SAP-namespace (starting with 0). Open one Query in your system via RRMX and select CalenderDay to create a new variable.
name:                0DAT
descrition:          current calender day
processed by:        SAP EXIT
Characteristic:      Calender Day
variable represents: Single Value
best regards
imberaureus

"Delivery 80001021 does not exist in the database or in the archive"

hi,
i am creating delivery document and save the delivery but while I'm checking the delivery doc no the system is showing following error "Delivery 80001021 does not exist in the database or in the archive"
please help
thanks
amit

Amit,
This problem is due to a program error. Talk to your devloper in order to solve it.
I copy & paste the below text or solution from OSS 993005. Check that for complete info.
Reason and Prerequisites
The problem is caused by a program error.
Solution
Implement the attached correction instructions.
After you confirm error message VL 559 "Delivery &1 does not exist in the database or in the archive", the system branches to either
the inbound delivery (DISPLAY) that was displayed or changed beforehand, or
the inbound delivery that has just been saved (also in display mode).
If no delivery was saved before you switched to 'Other inbound delivery', the original transaction is started again (for example: VL31N).
Regards,
Sats.

Does upgrading from 2003 to 2010 require a verify database on reports?

Hello,
I am working on upgrading an application from VS 2003 .Net 1.1 to VS 2010 .Net 4.0. I have installed the SAP Crystal Reports for Visual Studio 2010. After doing this I found that reports that had worked with .net 1.1 now do not work. When in the code, after loading a report and the printing
such as
Dim crDoc As New ReportDocument
crDoc.Load(strTemplatePath & strFile)
SetConnectionInfo(crCon, crDoc)
SetParameters(crDoc, parameters)
crDoc.PrintOptions.PrinterName = Me.strPrinter
crDoc.PrintToPrinter(1, False, 0, 0)
When the document goes to PrintToPrinter i receive an error message like 'Error in file blahblah.rpt: The table could not be found'. If I do a verify database on the report in question it will print correctly. However there are quite a few reports. Is a verify database expected after upgrading to .Net 4.0? Thanks for you help and have a great day!

Hello,
Typically when moving to one version change it's not required but in your case CR 9 was the version in 2003 and lots of DB changes to both CR and the Db Client engines.
So yes in this case you should Verify the database. You can do this once using a test, save an update flag in the SummaryInfo page, same as in the Designer when you click on File SummaryInfo. You can read/write to the comments and then test if a SaveAs or Export to RPT format was done. This will update the RPT format and connection info. So if it's updated then simply setting the user name and password is all that is required or even less if you have enabled Trusted Authentication.
Also, now that you have updated to CR for VS 2010 I highly recommend you start using RAS rather than the CR Basic which uses the Engine. You can still use both but the Engine and it's functions are not updated. If any updates or features added it will always be in RAS.
Also highly recommended is to use the PrintOutputController to print your reports rather than using PrintToPrinter....
Don

When I try to upload a file it goes through the correct proceedure, but does not change the remote file i.e.Index.htm

Hi
I have an uploading problem to the server. The problem is when I try to upload a file it goes through the correct proceedure,
but does not change the remote file i.e.Index.htm, or three stages1.htm.
My Localroot folder is C:\Gods Plan Web\
The site map layout is C:\Gods Plan Web\Index.htm
The folder for the remote site is /public_html/
Should the local root folder mirror the remote site, i.e./public_html/
if this is so, what should I put into the
(a) Local Root Folder box?
(b) site map layout box?
The FTP is performing well other than changing the intended file.

You should be uploading only the contents of your local root to the public_html folder (remote root).
The index.html you use as your site's home page needs to be in your site root. If you look at your Files window in DW, you should have something like the following...
Site - Whatever you named your site
     index.html
     images
     pages
          page1.html
          page2.html
If you have any folder between Site - and the index.html page, like...
Site - Whatever you named your site
     mywebsite
          index.html
It will upload to the public_html while still in that folder, so to find your page online, you would need to type something like...
www.mydomain.com/mywebsite
public_html should NOT appear within your local files and if it existed there, would cause a redundancy if uploaded. You would need to type www.yourdomain.com/public_html to see the uploaded pages.
If you could post a screen shot of your expanded Files window while connected to the server (just connect and click the Expand button in Files, don't drill down into any of the directories), we may be able to see the issue.

How does one change the font size for folders and/or file lists in the Bookmarks Library?

How does one change the font size for folders and/or file lists in the '''Bookmarks''' Library?
Since the upgrade to version 9.0.1 of Firefox, the Bookmarks feature changes are confusing me. They seem to be confusing themselves as well. The list of bookmarks has changed. The font size is so small that my aging eyes cannot read it without fogging the screen with my breath. Some folders are out of alphabetical order (where I know they were previously good), and some are missing altogether (folders to which I frequently add references).
As for missing or deranged files or folders, was there something that I should have done or now need to do to recover those after the upgrade (or before)?
With regard to font size,
1. there is no “Edit Bookmarks” or like option to edit the list in this version
2. the “zoom” option in the “view” list of functions is greyed out when in “Show All Bookmarks” window
3. expanding the browser window has no effect on font size
4. “Preferences” settings for font size has no effect in that window either, including advanced settings
5. “Help” offers none that I can find.
Can any of you Help?!?

Maybe this extension helps:
*Theme Font & Size Changer: https://addons.mozilla.org/firefox/addon/theme-font-size-changer/

When I convert my pdf doc to word, the fonts go really weird and it also puts some text into boxes. when I try to select the test and change the font, it does not change it properly?

When I convert my pdf doc to word, the fonts go really weird and it also puts some text into boxes. when I try to select the text and change the font, it does not change it properly? This is making it impossible to amend.

Hi Janedance1,
If the PDF that you converted already has searchable text, please try disabling OCR as described in this document: How to disable Optical Character Recognition (OCR) when converting PDF to Word or Excel. (If the PDF was created from a scanned document and doesn't already have searchable text, disabling OCR isn't a great option, as the text won't be searchable/editable in the converted Word doc.)
Please let us know how it goes.
Best,
Sara

BPM 10g Does passwd change of BPM Database require redeployment of Engine?

Similar Messages

Maybe you are looking for