BPM 5.7 MP3 Exception [Protocol [null] not supported.
Hi
we recently started getting this error for each deployed project
Each of my process instances goes to exception state and we are unable to understand this
From log viewer
PSGLProcessService::sourcePollProcess. Exception:fuego.directory.DirectoryRuntimeException: Exception [Protocol [null] not supported.
Technical detail:Verify that the needed plug-in supporting files are present in your system and that the provider name is not misspelled.
Where do i check for this files
The BPM log viewer records this information and the url it is using is correct
PSGLProcessService::sourcePollProcess. Fuego.Server.directoryURL : remote://orclServer/schema=albpm,sid=ALBPMDEV, UserID:EIBUser, Password:********
Appreciate any help with this
did you resolve this? i have same situation, but instead [null] there is [REMOTE_JDBC] name.
Similar Messages
-
Protocol remote_JDBC not support
When deploy the project using BPM Admin Center, when starting the weblogic server..
the error shows:
protocol remote_JDBC not support for eng-bpmengine.......Hi,
Is this this is the first project you've deployed on an Engine you've just installed? Knowing this will help us understand if you have a problem in one of the external resources in your project or if you had a problem caused by the installation.
If this is a new Engine, did you use the installation wizard that comes with Oracle BPM 10g? How did you answer the database information for the Directory Service and the Engine? Did you allow the wizard to create a new J2EE domain or did you try to use an existing one (I struggle using the wizard using an existing domain during the installation and get a similar error when I do so)?
Thanks,
Dan -
Error "Protocol [REMOTE_JDBC] not supported." while logging WORKSPACE ADMIN
Hi All,
I am trying the create a seperate domain for workspace admin, which is deployed in the Weblogic server. When I try to login, I get the error "Protocol [REMOTE_JDBC] not supported".
Am I missing some configuration?
Thanks in advance.
Regards,
Manohar ChhapoliaHi,
Is this this is the first project you've deployed on an Engine you've just installed? Knowing this will help us understand if you have a problem in one of the external resources in your project or if you had a problem caused by the installation.
If this is a new Engine, did you use the installation wizard that comes with Oracle BPM 10g? How did you answer the database information for the Directory Service and the Engine? Did you allow the wizard to create a new J2EE domain or did you try to use an existing one (I struggle using the wizard using an existing domain during the installation and get a similar error when I do so)?
Thanks,
Dan -
Upload Error message: HTTPS protocol is not supported
Hi,
Whenever I do a quick par upload i'm getting an 'Operation failed' message to check sap-plugin.log.
Log says
Upload Error message: HTTPS protocol is not supported, please ensure this server is not using HTTPS. My webdynpro applications are getting deployed without any issues.
How to resolve this?
Thanks
SumathiHi Sumathi,
As there are often problems with the Quick PAR Upload reported, I would suggest to use the "normal" PAR upload from the icon tray (you have to activate the portal icons in the icon tray). That is almost that "quick" (one or two clicks more needed, we don't talk about more than a second) and - it works (it least it should, and at least it works in most cases even if the Quick PAR Upload fails).
Hope it helps
Detlev -
TFTP, Protocol does not support listing directories
Hi everyone,
I am trying to install patch for PI 1.4 because of the browser problem. I have downloaded the patch.
I also have read the post https://supportforums.cisco.com/docs/DOC-26972#comment-22434 and followed the steps described.
I created repository and try to make the tftp server's root directory into the repository, as u can see in the picture below. Is it correct? Because when I want to display the file contain in the repository, the error message shown "Protocol does not support listing directories", what does it mean?
Thanks.Here's another way:::
1) From your PC launch a CMD Prompt
2) CD to the directory where the patch is installed
3) ftp xxx.xxx.xxx.xxx (this is the IP address of the NCS/PI server)
4) login as ftp-user
5) enter the password created during the install of NCS/PI for the ftp user account (if you don’t know it, you can change it by entering
ncs password ftpuser ftp-user password
6) type bin then press return
7) type hash then press return
8) type put
9) login to the CLI of the NCS/PI server as an admin user
10) type dir disk:ftp and you’ll see the file stored in the /localdisk/ftp directory on the disk
11) if you don’t have a repo pointing to disk:ftp then create one using
a) config t
b) repository localftp
c) url disk:/ftp
d) exit
12) type ncs stop
13) type patch install localftp
Note: if a PC firewall is enabled, you may have to disable it in order to get the file transfer to work -
Protocol webcal not supported ?
In my company i have published my ical-calendar to an exchange 2000 server (webdav) using webcal:// protocol.
ical-publish-url: webcal://exchangeserver/path/to/calendar/file.ics
After updating to 10.4.x i get an error when i configure the publish-url with webcal:// . iCal announces that webcal:// does not supported.
How do i have to configure iCal, so that the calendar publication functions against?
running system before update:
- Mac OS X 10.3.9 / iCal 1.5.5 (670)
updated system:
- Mac OS X 10.4.5 / iCal 2.0.3 (1055)
iMac G4 1,25 Mac OS X (10.4.5)The PVDM3 DSPs do not support Cisco proprietary fax relay. You can use T.38 instead, or fax passthrough for devices which don't support T.38 (e.g. ATA186).
http://www.cisco.com/en/US/docs/ios/voice/fax/configuration/guide/vf_cfg_t38_fxrly.html
Please remember to rate helpful responses and identify helpful or correct answers. -
Specified protocol not supported by IIS Server
Hi @all,
I want to use Collaboration in my Enterprise Portal, I can use everything (CLP, Chat, Mailing, etc.), except the Calendar in the Collaboration Rooms. When I enter a room with a Calendar I get the following message: <b><i>The specified protocol is not supported by the IIS server</i></b>.
I configured the Transports, Exchange System, Calendar Repository, IIS, MSX-A, etc.
Does somebody have a solution? Or where do I have to look for the needed settings?
Thanks in advance
regards
LuThis is a big reason to make the move to dynamic development. There are many sites that use PHP or CF and never connect to a database. The ability to have your menus, headers, footers added to your pages with one simple line of code such as:
<cfinclude template="FooterContent.cfm">
for ColdFusion or
<?php
include("FooterContent.php");
?>
for php
Makes it well worth moving from static HTML pages to using CF or php.
Even if your host did support SSI's you'll find true dynamic development to be a much more reliable solution - and this isn't even mentioning how to handle form submissions and so many other non database related functions... for example this line of code
Copyright 2002 - <cfoutput>#DateFormat(Now(), "yyyy")#</cfoutput>
Will automatically show the current year at the end of your copyright statement in your footer - sweet, right?
Hope this encourages toy to make the move.
Lawrence Cramer - *Adobe Community Professional*
http://www.Cartweaver.com
PHP & ColdFusion Shopping Cart for Adobe Dreamweaver and code developers.
Stay updated:
http://www.facebook.com/cartweaver
http://www.twitter.com/cartweaver
http://blog.cartweaver.com -
Protocol not supported for YouTube
I was trying to view a video clip on YouTube & I got an error message saying the protocol was not supported on my handheld device. I have an 8830 World Edition. Is there something I need to download to watch the video clips?
Hi,
Did you browse to m.youtube.com or www.youtube.com?
You need to goto m.youtube.com....
Checked out my Blackberry FAQ's and Links to Needed Articles here
http://darkeen.homelinux.com/index.php/Blackberryfaq -
MalformedURLException - Oracle not support?
Dear all,
I'm trying to use a standalone java client to talk to ALBPM via PAPI. I get it compiled (the Fuego55-APIsGuide is a bit out dated in terms of jar file list, btw). However, when I try to get it run, I got the following error:
W:\savaria_1\server_1_0\src>java -Dfuego.je22.initialctx.file=C:\bea\TestApp\Properties\tomcatProperties.jndi -classpath . -Djava.ext.dirs=W:\savaria_1\server_1_0\lib com.tradebeam.workflow.gateway.WFRequestHandler
fuego.papi.exception.ProtocolNotSupportedException: Protocol not supported for URL: 'oracle://grendel.sftech.corp.biz:1521/schema=beaaqualogic,sid=DEV'.
at fuego.papi.impl.ProcessServiceFactoryImpl.create(ProcessServiceFactoryImpl.java:72)
at fuego.papi.impl.ProcessServiceFactoryImpl.create(ProcessServiceFactoryImpl.java:155)
at fuego.papi.impl.ProcessServiceFactoryImpl.create(ProcessServiceFactoryImpl.java:132)
at fuego.papi.ProcessService.create(ProcessService.java:426)
at com.tradebeam.workflow.gateway.WFRequestHandler.firstTest(WFRequestHandler.java:46)
at com.tradebeam.workflow.gateway.WFRequestHandler.main(WFRequestHandler.java:94)
Caused by: fuego.directory.exception.ProtocolNotSupportedException: Invalid URL: [oracle://grendel.sftech.corp.biz:1521/schema=beaaqualogic,sid=DEV].
at fuego.directory.exception.ProtocolNotSupportedException.malformedUrlWithException(ProtocolNotSupportedException.java:45)
at fuego.directory.provider.Factory.getFactoryFromPassport(Factory.java:209)
at fuego.directory.Directory.startAnonymousSession(Directory.java:616)
at fuego.papi.impl.ProcessServiceFactoryImpl.create(ProcessServiceFactoryImpl.java:68)
... 5 more
Caused by: fuego.directory.exception.MalformedURLException: Protocol [oracle] not supported.
Technical detail:Verify that the needed plug-in supporting files are present in your system and that the provider name is not misspelled.
at fuego.directory.exception.MalformedURLException.protocolNotSupported(MalformedURLException.java:64)
at fuego.directory.URLParser.createStrategy(URLParser.java:202)
at fuego.directory.URLParser.createURLParser(URLParser.java:79)
at fuego.directory.provider.Factory.getFactoryFromPassport(Factory.java:205)
======================================
In my directory.properties, I have:
# Directory configuration
# The following properties define the configuration for a directory provider.
# Do not modify the prefix of the properties. Always leave "directory.default."
directory.default.url=oracle://grendel.sftech.corp.biz:1521/schema=beaaqualogic,sid=DEV
# Presets are used to provide properties to the directory with an specific name
# If a preset is anonymous (no Fuego participant), then comment the participant line
# nevertheless, connection properties can be defined
directory.default.preset.xobjects.participant=beaaqualogic
directory.default.preset.xobjects.participant_password=123456#
directory.default.preset.portal-anonymous.participant=beaaqualogic
directory.default.preset.portal-anonymous.participant_password=123456
directory.default.preset.datawarehouse.participant=beaaqualogic
directory.default.preset.datawarehouse.participant_password=123456
directory.default.preset.engine.participant=beaaqualogic
directory.default.preset.engine.participant_password=123456#
# oracle FDI implementation
# Single connection properties (used when FDI handles the authentication)
directory.default.jdbc-user=beaaqualogic
directory.default.jdbc-password=123456
provider.oracle.anonymous-user=beaaqualogic
provider.oracle.anonymous-password=123456
=================================
Finally, this is my TomcatProperties.jndi:
#TOMCAT jndi config
java.naming.factory.initial=org.jnp.interfaces.NamingContextFactory
java.naming.provider.url=localhost:1099
Any idea what I've done wrong or missed? Thanks in advance!!
Regards,
MatthewI've found why - turns out it was mentioned in the older APIs guide (ver 5.1). I need fuegofdi-oracle.jar.
Now I just hit another error - CachedRowSet NoClassDefFoundError. This is easy cause I just need to get rowset.jar from sun's j2ee library (or if I were using Java 1.5 it would have already bundled inside).
Regards,
Matthew -
Workflows Do Not Start - "Not Supported in Windows Authentication Mode"
I have a publishing site that is using Kerbos authentication. Everything on the site works fine.
I created a simple workflow in SPD 2013 and published this to the site without any problems. However when I try to start the workflow with the account of a user who is a member of the site it will not run. In the browser an alert pop's up
saying "Something went wrong. To try again, reload the page and then start the workflow again".
In the SharePoint log's I find the following:
SharePoint Server Workflow Services aj5oh Exception System.NotSupportedException: Not supported
in Windows authentication mode. at Microsoft.SharePoint.IdentityModel.SPIdentityContext.Create(SPUserToken token, Boolean isShareByLinkGuestUser) at Microsoft.SharePoint.WorkflowServices.WorkflowServiceContextExtensions.GetApplicationUserCredentials(WorkflowServicesContext
context) StackTrace: at Microsoft.Office.Server.Native.dll: (sig=1f86b0bf-2440-4b16-9099-860a571153c2|2|microsoft.office.server.native.pdb, offset=131CE) at Microsoft.Office.Server.Native.dll: (offset=21C85) 799af29b-db87-0034-c938-8a35e4082ffc
This is a dev environment where everthing is setup on a single box, and I registered the workflow service in HTTP mode (which I allowed during the installation of workflow manager).
Any ideas on what the problem might be?
Thanks,
RichardYou haven't changed it to Claims there, you have changed NTLM to Kerberos. I guess your web app was already claims based because in SP 2013 we have to use Powershell to convert classic to claims and not from GUI.
When I click the workflow on a item to start in manually I get the error:
"Something went wrong. To try again, reload the page and then start the workflow"
In ULS I get the not supported exception.
It seems 2013 platform workflows aren't supported in classic mode web applications:
http://sharepointconnoisseur.blogspot.co.uk/2012/11/sharepoint-2013-upgrade-preparation-to.html
But I am not able to publish 2010 mode workflows in the classic web application, SPD 2013 throws error while publishing:
"Unexpected error on server, wf cannot be associated"
So does Infopath while publishing on to a list in that web application:
-- The opinions expressed here represent my own and not those of anybody else -- http://manojvnair.blogspot.com -
Why does Apple Bluetooth for iOS not support SPP profile?
I am curious why this really useful protocol is not supported by iOS.
Thanks for any information.
What I would do with it: develop software to support my favorite OBD-II interface hardware, PLX Devices Kiwi Bluetooth.KT,
Thanks for your reply.
There are some iOS apps that support OBD-II, generally by a specific manufacturer for their hardware. Much of this hardware is "not very good". PLX is a unique company with great hardware, I already own a Kiwi BT ($$) and do not want to buiy lesser junk just so I can buy the single-source software that comes with it. PLX provides an open interface architecture that happens to be SPP Bluetooth. There is a lot of great software for it from different angles...all Android. I used to have an android phone when I bought the Kiwi. The Kiwi Wifi is supported by Apple, I will buy that if I have to get more hardware... but not happily. Apple has restricted SPP from the "bubble", I just want to know why?
Regards,
Jack -
Could not create pool connection. the dbms driver exception was : null
Hi,
I am creating Data source to connect to my DB2 database
Details of the connections are as follows
1) URL : jdbc:as400://hostname;translate binary=true
2) Driver class : com.ibm.as400.access.AS400JDBCDriver
am getting following error when I am trying to deploy the data source to server
An error occurred during activation of changes, please see the log for details.
weblogic.application.ModuleException:
weblogic.common.ResourceException: Could not create pool connection. The DBMS driver exception was: null
Connection is successful using test configuration.
Weblogic Version am using is 10.3.
Please help.
Thanks,
ArunHi. That means the JDBC driver you specified threw a NullPointerException
when we tried to make a connection with it...
Can you show the XML file for the DataSource? It's in the domain's
config/jdbc directory. -
Hi, what should I do if I have this problem,
Install Adobe Flash Player quit unexpectedly, and this is from the Problem Report,
terminating with uncaught exception of type std::logic_error: basic_string::_S_construct NULL not validHi viktoriat6208079,
What does "it is not worked out." mean? What happens when you use the offline installer?
To modify how your name displays in the forums:
Go to your profile by clicking on the avatar in the upper right, alternatively, click on your username/name link
Then select Actions > Edit Communities Profile
In the next window, click on Privacy
The Privacy tab contains numerous options, one is how your name displays in the forums. If you select "Yourself" then only you can see your name.
Maria -
ERROR: exception symbol "09732" not found in resource file
I am trying to get a client to work with workflow services. I get 'ERROR: exception symbol "09732" not found in resource file' in the output when the method queryTasks is excecuted.
Jdeveloper 10.1.3.4 and SOA Suite 10.1.3.3.0
Any ideas?
Eydun
------------------ program ---------------------
package project1;
//import com.oracle.services.bpel.task.Task;
import java.util.ArrayList;
import oracle.bpel.services.workflow.client.IWorkflowServiceClient;
import oracle.bpel.services.workflow.client.WorkflowServiceClientFactory;
import oracle.bpel.services.workflow.query.ITaskQueryService;
import oracle.bpel.services.workflow.verification.IWorkflowContext;
import java.util.List;
import oracle.bpel.services.workflow.repos.Ordering;
import oracle.bpel.services.workflow.repos.Predicate;
import oracle.bpel.services.workflow.repos.TableConstants;
import oracle.bpel.services.workflow.task.ITaskService;
import oracle.bpel.services.workflow.task.model.Task;
public class Class1 {
public Class1() {
public void TryTask() {
try {
//Create JAVA WorflowServiceClient
IWorkflowServiceClient wfSvcClient =
WorkflowServiceClientFactory.getWorkflowServiceClient(WorkflowServiceClientFactory.WSIF_CLIENT);
//Get the task query service
ITaskQueryService querySvc = wfSvcClient.getTaskQueryService();
//Login as jstein
IWorkflowContext ctx = querySvc.authenticate("jstein",
"welcome1",
null, //Use default realm
null);//Not logging in on behalf of another user
//Set up list of columns to query
List queryColumns = new ArrayList();
queryColumns.add("TASKID");
queryColumns.add("TASKNUMBER");
queryColumns.add("TITLE");
queryColumns.add("OUTCOME");
//Create a predicate to query tasks that have a null outcome
String outcome = null;
Predicate predicate = new Predicate(TableConstants.WFTASK_OUTCOME_COLUMN,
Predicate.OP_EQ,
outcome);
//Create an ordering to order tasks by task number
Ordering ordering = new Ordering(TableConstants.WFTASK_TASKNUMBER_COLUMN
,true //Ascending order
,false //Nulls last
//Query a list of tasks assigned to jstein
List tasks = querySvc.queryTasks(ctx,
queryColumns,
null, //Do not query additional info
ITaskQueryService.ASSIGNMENT_FILTER_MY,
null, //No keywords
null, //predicate, //Only tasks with no outome set
ordering, //Order by ascending task number
0, //Do not page the query result
0);
//Get the task service
ITaskService taskSvc = wfSvcClient.getTaskService();
//Loop over the tasks, outputting task information, and approving tasks
for(int i = 0 ; i < tasks.size() ; i ++)
Task task = (Task)tasks.get(i);
int taskNumber = task.getSystemAttributes().getTaskNumber();
String title = task.getTitle();
String taskId = task.getSystemAttributes().getTaskId();
//Set the outcome
taskSvc.updateTaskOutcome(ctx,taskId,"APPROVED");
System.out.println("Task #"+taskNumber+" ("+title+") is APPROVED");
catch (Exception e)
//Handle any exceptions raised here...
System.out.println("Caught workflow exception: "+e.getMessage());
public static void main(String[] args) {
Class1 class1 = new Class1();
class1.TryTask();
------------------- output ---------------------
C:\java\jdk1.6.0_07\bin\javaw.exe -client -classpath C:\jdev11work\eej\mywork\Application3\Project1\classes;C:\oracle\jdev10134bpellibs\bpel\lib\bpm-infra.jar;C:\oracle\jdev10134bpellibs\bpel\lib\orabpel-common.jar;C:\oracle\jdev10134bpellibs\bpel\lib\orabpel-thirdparty.jar;C:\oracle\jdev10134bpellibs\j2ee\home\jazncore.jar;C:\oracle\jdev10134bpellibs\j2ee\home\oc4jclient.jar;C:\oracle\jdev10134bpellibs\lib\xml.jar;C:\oracle\jdev10134bpellibs\lib\xmlparserv2.jar;C:\oracle\jdev10134bpellibs\bpel\system\services\config;C:\oracle\jdev10134bpellibs\webservices\lib\orasaaj.jar;C:\oracle\jdev10134bpellibs\webservices\lib\soap.jar;C:\oracle\jdev10134bpellibs\bpel\system\services\lib\bpm-services.jar;C:\oracle\jdev10134bpellibs\bpel\system\services\schema;C:\oracle\jdev10134bpellibs\bpel\lib\olite40.jar;C:\oracle\jdev10134bpellibs\jdbc\lib\ojdbc14.jar;C:\oracle\jdev10134bpellibs\bpel\lib\orabpel.jar;C:\oracle\jdev10134bpellibs\wsclient_extended.jar project1.Class1
<::> WorkflowService:: TaskQueryService.authenticate(): called. user = jstein identityContext = null onBehalfOfUser = null
<::> WorkflowService:: VerificationService.authenticateUser: attempting for user = jstein identityContext = null
<ISConfiguration::load> Found Configuration=Configuration: realmName=jazn.com properties:{} has 1 providers:
<ISConfiguration::load> Provider: service=Identity providerType=JAZN providerName=XML Provider properties:{usersPropertiesFile=users-properties.xml}
<ISConfiguration::load>
<ISConfiguration::validate> Validate configuration=Configuration: realmName=jazn.com properties:{} has 1 providers:
<ISConfiguration::validate> Provider: service=Identity providerType=JAZN providerName=XML Provider properties:{usersPropertiesFile=users-properties.xml}
<ISConfiguration::validate>
<ISConfiguration::save> Save IdentityService configuration file into /C:/oracle/jdev10134bpellibs/bpel/system/services/config/is_config.xml
<ServiceFactory::getService> Provider type is JAZN
<ServiceFactory::getService> JAZN's ProviderType=XML
<XMLIdentityService::init> Load provider initialization begin
<AbstractXMLProvider::loadUsers> XMLProvider::load() Load users from source:users-properties.xml
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
<BPMUserImpl::<init>> Constacted user=cdickens
<XMLProvider::addUserToCache> User cdickens is loaded ....
<BPMUserImpl::<init>> Constacted user=wfaulk
<XMLAuthenticationService::init> Load provider initialization complete
<XMLAuthorizationService::init> Load provider initialization begin
<AbstractXMLProvider::loadUsers> XMLProvider::load() Load users from source:users-properties.xml
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
<BPMUserImpl::<init>> Constacted user=cdickens
<XMLProvider::addUserToCache> User cdickens is loaded ....
<BPMUserImpl::<init>> Constacted user=wfaulk
<XMLProvider::addUserToCache> User wfaulk is loaded ....
<BPMUserImpl::<init>> Constacted user=sfitzger
<XMLProvider::addUserToCache> User sfitzger is loaded ....
<BPMUserImpl::<init>> Constacted user=jstein
<XMLProvider::addUserToCache> User jstein is loaded ....
<BPMUserImpl::<init>> Constacted user=istone
<XMLProvider::addUserToCache> User istone is loaded ....
<BPMUserImpl::<init>> Constacted user=jcooper
<XMLProvider::addUserToCache> User jcooper is loaded ....
<BPMUserImpl::<init>> Constacted user=mtwain
<XMLProvider::addUserToCache> User mtwain is loaded ....
<BPMUserImpl::<init>> Constacted user=jlondon
<XMLProvider::addUserToCache> User jlondon is loaded ....
<BPMUserImpl::<init>> Constacted user=ltolstoy
<XMLProvider::addUserToCache> User ltolstoy is loaded ....
<BPMUserImpl::<init>> Constacted user=fkafka
<XMLProvider::addUserToCache> User fkafka is loaded ....
<BPMUserImpl::<init>> Constacted user=szweig
<XMLProvider::addUserToCache> User szweig is loaded ....
<BPMUserImpl::<init>> Constacted user=mmitch
<XMLProvider::addUserToCache> User mmitch is loaded ....
<BPMUserImpl::<init>> Constacted user=jausten
<XMLProvider::addUserToCache> User jausten is loaded ....
<BPMUserImpl::<init>> Constacted user=achrist
<XMLProvider::addUserToCache> User achrist is loaded ....
<BPMUserImpl::<init>> Constacted user=rsteven
<XMLProvider::addUserToCache> User rsteven is loaded ....
<BPMUserImpl::<init>> Constacted user=cdoyle
<XMLProvider::addUserToCache> User cdoyle is loaded ....
<BPMUserImpl::<init>> Constacted user=wshake
<XMLProvider::addUserToCache> User wshake is loaded ....
<BPMUserImpl::<init>> Constacted user=guest
<XMLProvider::addUserToCache> User guest is loaded ....
<BPMUserImpl::<init>> Constacted user=bpeladmin
<XMLProvider::addUserToCache> User bpeladmin is loaded ....
<BPMUserImpl::<init>> Constacted user=default
<XMLProvider::addUserToCache> User default is loaded ....
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
<AbstractXMLProvider::loadRoles> XMLProvider::load() Load roles from source:users-properties.xml
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
<XMLProvider::addRoleToCache> Role BPMAnalyst is loaded .....
<XMLProvider::addRoleToCache> Role BPMWorkflowAdmin is loaded .....
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
<XMLProvider::addRoleToCache> Role LoanAgentGroup is loaded .....
<XMLProvider::addRoleToCache> Role LoanAnalyticGroup is loaded .....
<XMLProvider::addRoleToCache> Role LoanAnalyticGroup is loaded .....
<XMLProvider::addRoleToCache> Role Supervisor is loaded .....
<XMLProvider::addRoleToCache> Role California is loaded .....
<XMLProvider::addRoleToCache> Role WesternRegion is loaded .....
<XMLProvider::addRoleToCache> Role EasternRegion is loaded .....
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
<XMLAuthorizationService::init> Load provider initialization complete
<XMLAuthenticationService::authenticateUser> XMLAuthenticationService::authenticateUser():: begin
<BPMServiceJAZNBase::getRealm> BPMAuthenticationServiceImpl::getRealm():: begin
<BPMServiceJAZNBase::getRealm> Realm=[Realm: jazn.com]
<BPMServiceJAZNBase::getRealm> BPMAuthenticationServiceImpl::getRealm():: end
<XMLAuthenticationService::authenticateUser> XMLAuthenticationService:: call authenticate
<XMLAuthenticationService::authenticateUser> XMLAuthenticationService:: user is authenticated!
<XMLAuthenticationService::authenticateUser> XMLAuthenticationService::authenticateUser():: end
<ServiceFactory::getService> Provider type is JAZN
<ServiceFactory::getService> JAZN's ProviderType=XML
<XMLIdentityService::init> Load provider initialization begin
<AbstractXMLProvider::loadUsers> XMLProvider::load() Load users from source:users-properties.xml
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
<BPMUserImpl::<init>> Constacted user=cdickens
<XMLProvider::addUserToCache> User cdickens is loaded ....
<BPMUserImpl::<init>> Constacted user=wfaulk
<XMLProvider::addUserToCache> User wfaulk is loaded ....
<BPMUserImpl::<init>> Constacted user=sfitzger
<XMLProvider::addUserToCache> User sfitzger is loaded ....
<BPMUserImpl::<init>> Constacted user=jstein
<XMLProvider::addUserToCache> User jstein is loaded ....
<BPMUserImpl::<init>> Constacted user=istone
<XMLProvider::addUserToCache> User istone is loaded ....
<BPMUserImpl::<init>> Constacted user=jcooper
<XMLProvider::addUserToCache> User jcooper is loaded ....
<BPMUserImpl::<init>> Constacted user=mtwain
<XMLProvider::addUserToCache> User mtwain is loaded ....
<BPMUserImpl::<init>> Constacted user=jlondon
<XMLProvider::addUserToCache> User jlondon is loaded ....
<BPMUserImpl::<init>> Constacted user=ltolstoy
<XMLProvider::addUserToCache> User ltolstoy is loaded ....
<BPMUserImpl::<init>> Constacted user=fkafka
<XMLProvider::addUserToCache> User fkafka is loaded ....
<BPMUserImpl::<init>> Constacted user=szweig
<XMLProvider::addUserToCache> User szweig is loaded ....
<BPMUserImpl::<init>> Constacted user=mmitch
<XMLProvider::addUserToCache> User mmitch is loaded ....
<BPMUserImpl::<init>> Constacted user=jausten
<XMLProvider::addUserToCache> User jausten is loaded ....
<BPMUserImpl::<init>> Constacted user=achrist
<XMLProvider::addUserToCache> User achrist is loaded ....
<BPMUserImpl::<init>> Constacted user=rsteven
<XMLProvider::addUserToCache> User rsteven is loaded ....
<BPMUserImpl::<init>> Constacted user=cdoyle
<XMLProvider::addUserToCache> User cdoyle is loaded ....
<BPMUserImpl::<init>> Constacted user=wshake
<XMLProvider::addUserToCache> User wshake is loaded ....
<BPMUserImpl::<init>> Constacted user=guest
<XMLProvider::addUserToCache> User guest is loaded ....
<BPMUserImpl::<init>> Constacted user=bpeladmin
<XMLProvider::addUserToCache> User bpeladmin is loaded ....
<BPMUserImpl::<init>> Constacted user=default
<XMLProvider::addUserToCache> User default is loaded ....
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
<AbstractXMLProvider::loadRoles> XMLProvider::load() Load roles from source:users-properties.xml
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
<XMLProvider::addRoleToCache> Role BPMAnalyst is loaded .....
<XMLProvider::addRoleToCache> Role BPMWorkflowAdmin is loaded .....
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
<XMLProvider::addRoleToCache> Role LoanAgentGroup is loaded .....
<XMLProvider::addRoleToCache> Role LoanAnalyticGroup is loaded .....
<XMLProvider::addRoleToCache> Role LoanAnalyticGroup is loaded .....
<XMLProvider::addRoleToCache> Role Supervisor is loaded .....
<XMLProvider::addRoleToCache> Role California is loaded .....
<XMLProvider::addRoleToCache> Role WesternRegion is loaded .....
<XMLProvider::addRoleToCache> Role EasternRegion is loaded .....
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
<XMLIdentityService::init> Load provider initialization complete
<XMLAuthenticationService::init> Load provider initialization begin
<AbstractXMLProvider::loadUsers> XMLProvider::load() Load users from source:users-properties.xml
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
<BPMUserImpl::<init>> Constacted user=cdickens
<XMLProvider::addUserToCache> User cdickens is loaded ....
<BPMUserImpl::<init>> Constacted user=wfaulk
<XMLProvider::addUserToCache> User wfaulk is loaded ....
<BPMUserImpl::<init>> Constacted user=sfitzger
<XMLProvider::addUserToCache> User sfitzger is loaded ....
<BPMUserImpl::<init>> Constacted user=jstein
<XMLProvider::addUserToCache> User jstein is loaded ....
<BPMUserImpl::<init>> Constacted user=istone
<XMLProvider::addUserToCache> User istone is loaded ....
<BPMUserImpl::<init>> Constacted user=jcooper
<XMLProvider::addUserToCache> User jcooper is loaded ....
<BPMUserImpl::<init>> Constacted user=mtwain
<XMLProvider::addUserToCache> User mtwain is loaded ....
<BPMUserImpl::<init>> Constacted user=jlondon
<XMLProvider::addUserToCache> User jlondon is loaded ....
<BPMUserImpl::<init>> Constacted user=ltolstoy
<XMLProvider::addUserToCache> User ltolstoy is loaded ....
<BPMUserImpl::<init>> Constacted user=fkafka
<XMLProvider::addUserToCache> User fkafka is loaded ....
<BPMUserImpl::<init>> Constacted user=szweig
<XMLProvider::addUserToCache> User szweig is loaded ....
<BPMUserImpl::<init>> Constacted user=mmitch
<XMLProvider::addUserToCache> User mmitch is loaded ....
<BPMUserImpl::<init>> Constacted user=jausten
<XMLProvider::addUserToCache> User jausten is loaded ....
<BPMUserImpl::<init>> Constacted user=achrist
<XMLProvider::addUserToCache> User achrist is loaded ....
<BPMUserImpl::<init>> Constacted user=rsteven
<XMLProvider::addUserToCache> User rsteven is loaded ....
<BPMUserImpl::<init>> Constacted user=cdoyle
<XMLProvider::addUserToCache> User cdoyle is loaded ....
<BPMUserImpl::<init>> Constacted user=wshake
<XMLProvider::addUserToCache> User wshake is loaded ....
<BPMUserImpl::<init>> Constacted user=guest
<XMLProvider::addUserToCache> User guest is loaded ....
<BPMUserImpl::<init>> Constacted user=bpeladmin
<XMLProvider::addUserToCache> User bpeladmin is loaded ....
<BPMUserImpl::<init>> Constacted user=default
<XMLProvider::addUserToCache> User default is loaded ....
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
<AbstractXMLProvider::loadRoles> XMLProvider::load() Load roles from source:users-properties.xml
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
<XMLProvider::addRoleToCache> Role BPMAnalyst is loaded .....
<XMLProvider::addRoleToCache> Role BPMWorkflowAdmin is loaded .....
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
<XMLProvider::addRoleToCache> Role LoanAgentGroup is loaded .....
<XMLProvider::addRoleToCache> Role LoanAnalyticGroup is loaded .....
<XMLProvider::addRoleToCache> Role LoanAnalyticGroup is loaded .....
<XMLProvider::addRoleToCache> Role Supervisor is loaded .....
<XMLProvider::addRoleToCache> Role California is loaded .....
<XMLProvider::addRoleToCache> Role WesternRegion is loaded .....
<XMLProvider::addRoleToCache> Role EasternRegion is loaded .....
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
<XMLAuthenticationService::init> Load provider initialization complete
<XMLAuthorizationService::init> Load provider initialization begin
<AbstractXMLProvider::loadUsers> XMLProvider::load() Load users from source:users-properties.xml
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
<BPMUserImpl::<init>> Constacted user=cdickens
<XMLProvider::addUserToCache> User cdickens is loaded ....
<BPMUserImpl::<init>> Constacted user=wfaulk
<XMLProvider::addUserToCache> User wfaulk is loaded ....
<BPMUserImpl::<init>> Constacted user=sfitzger
<XMLProvider::addUserToCache> User sfitzger is loaded ....
<BPMUserImpl::<init>> Constacted user=jstein
<XMLProvider::addUserToCache> User jstein is loaded ....
<BPMUserImpl::<init>> Constacted user=istone
<XMLProvider::addUserToCache> User istone is loaded ....
<BPMUserImpl::<init>> Constacted user=jcooper
<XMLProvider::addUserToCache> User jcooper is loaded ....
<BPMUserImpl::<init>> Constacted user=mtwain
<XMLProvider::addUserToCache> User mtwain is loaded ....
<BPMUserImpl::<init>> Constacted user=jlondon
<XMLProvider::addUserToCache> User jlondon is loaded ....
<BPMUserImpl::<init>> Constacted user=ltolstoy
<XMLProvider::addUserToCache> User ltolstoy is loaded ....
<BPMUserImpl::<init>> Constacted user=fkafka
<XMLProvider::addUserToCache> User fkafka is loaded ....
<BPMUserImpl::<init>> Constacted user=szweig
<XMLProvider::addUserToCache> User szweig is loaded ....
<BPMUserImpl::<init>> Constacted user=mmitch
<XMLProvider::addUserToCache> User mmitch is loaded ....
<BPMUserImpl::<init>> Constacted user=jausten
<XMLProvider::addUserToCache> User jausten is loaded ....
<BPMUserImpl::<init>> Constacted user=achrist
<XMLProvider::addUserToCache> User achrist is loaded ....
<BPMUserImpl::<init>> Constacted user=rsteven
<XMLProvider::addUserToCache> User rsteven is loaded ....
<BPMUserImpl::<init>> Constacted user=cdoyle
<XMLProvider::addUserToCache> User cdoyle is loaded ....
<BPMUserImpl::<init>> Constacted user=wshake
<XMLProvider::addUserToCache> User wshake is loaded ....
<BPMUserImpl::<init>> Constacted user=guest
<XMLProvider::addUserToCache> User guest is loaded ....
<BPMUserImpl::<init>> Constacted user=bpeladmin
<XMLProvider::addUserToCache> User bpeladmin is loaded ....
<BPMUserImpl::<init>> Constacted user=default
<XMLProvider::addUserToCache> User default is loaded ....
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
<AbstractXMLProvider::loadRoles> XMLProvider::load() Load roles from source:users-properties.xml
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
<XMLProvider::addRoleToCache> Role BPMAnalyst is loaded .....
<XMLProvider::addRoleToCache> Role BPMWorkflowAdmin is loaded .....
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
<XMLProvider::addRoleToCache> Role LoanAgentGroup is loaded .....
<XMLProvider::addRoleToCache> Role LoanAnalyticGroup is loaded .....
<XMLProvider::addRoleToCache> Role LoanAnalyticGroup is loaded .....
<XMLProvider::addRoleToCache> Role Supervisor is loaded .....
<XMLProvider::addRoleToCache> Role California is loaded .....
<XMLProvider::addRoleToCache> Role WesternRegion is loaded .....
<XMLProvider::addRoleToCache> Role EasternRegion is loaded .....
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
<XMLAuthorizationService::init> Load provider initialization complete
<BPMAuthorizationServiceImpl::lookupUser> BPMAuthorizationServiceImpl::lookupUser():: begin, userName=jstein
<BPMServiceJAZNBase::getRealm> BPMAuthenticationServiceImpl::getRealm():: begin
<BPMServiceJAZNBase::getRealm> Realm=[Realm: jazn.com]
<BPMServiceJAZNBase::getRealm> BPMAuthenticationServiceImpl::getRealm():: end
<BPMUserImpl::<init>> User=jstein was created
<BPMAuthorizationServiceImpl::lookupUser> User is found, user=RealmUser: jstein
<BPMIdentityImpl::getActions> BPMIdentityImpl::getActions()
<BPMIdentityImpl::getAllGrantedRealmRoles> Identity has the following granted realmRoles=[RealmRole: BPMWorkflowReassign, RealmRole: BPMWorkflowSuspend, RealmRole: BPMAnalyst]
<RoleProperties::load> Resource oracle/tip/pc/services/identity/role.properties is loaded, s_properties={BPMWorkflowSuspend=SUSPEND,RESUME, BPMWorkflowAdmin=ADMIN, BPMWorkflowReassign=REASSIGN, BPMPublic=VIEW_WORK_LIST,ACQUIRE,WITHDRAW,ESCALATE,ERROR,PUSH_BACK,RENEW,RELEASE,REQUEST_INFO,SUBMIT_INFO,CUSTOM,VIEW_TASK_HISTORY,VIEW_SUB_TASKS,UPDATE,ADHOC_ROUTE,OUTCOME_UPDATE_ROUTE, BPMSystemAdmin=, BPMWorkflowViewHistory=VIEW_TASK_HISTORY,VIEW_PROCESS_HISTORY, BPMAnalyst=VIEW_REPORTS}
<BPMIdentityImpl::getActions> Identity has the following roles:[BPMWorkflowReassign, BPMWorkflowSuspend, BPMAnalyst]
<BPMIdentityImpl::getActions> Role: BPMWorkflowReassign
<BPMIdentityImpl::getActions> Actions: [OUTCOME_UPDATE_ROUTE, REQUEST_INFO, CUSTOM, VIEW_SUB_TASKS, WITHDRAW, PUSH_BACK, ACQUIRE, ADHOC_ROUTE, RENEW, UPDATE, SUBMIT_INFO, VIEW_TASK_HISTORY, ERROR, VIEW_WORK_LIST, RELEASE, ESCALATE, REASSIGN]
<BPMIdentityImpl::getActions> Role: BPMWorkflowSuspend
<BPMIdentityImpl::getActions> Actions: [RESUME, OUTCOME_UPDATE_ROUTE, REQUEST_INFO, CUSTOM, VIEW_SUB_TASKS, WITHDRAW, PUSH_BACK, SUSPEND, ACQUIRE, ADHOC_ROUTE, RENEW, UPDATE, SUBMIT_INFO, VIEW_TASK_HISTORY, ERROR, VIEW_WORK_LIST, RELEASE, ESCALATE]
<BPMIdentityImpl::getActions> Role: BPMAnalyst
<BPMIdentityImpl::getActions> Actions: [OUTCOME_UPDATE_ROUTE, REQUEST_INFO, CUSTOM, VIEW_SUB_TASKS, WITHDRAW, PUSH_BACK, ACQUIRE, ADHOC_ROUTE, RENEW, UPDATE, SUBMIT_INFO, VIEW_TASK_HISTORY, ERROR, VIEW_WORK_LIST, RELEASE, ESCALATE, VIEW_REPORTS]
<BPMIdentityImpl::getActions> Identity has the following actions:[RESUME, OUTCOME_UPDATE_ROUTE, REQUEST_INFO, CUSTOM, VIEW_SUB_TASKS, WITHDRAW, PUSH_BACK, SUSPEND, ACQUIRE, RENEW, ADHOC_ROUTE, UPDATE, SUBMIT_INFO, VIEW_TASK_HISTORY, VIEW_WORK_LIST, ERROR, ESCALATE, RELEASE, REASSIGN, VIEW_REPORTS]
<BPMPrincipalImpl::getAttribute> Attribute=languagePreference is not set. Populate principal=jstein
<::> WorkflowService:: VerificationService.authenticateUser: successful for user = jstein identityContext = null
<::> WorkflowService:: TaskQueryService.authenticate(): completed. token = c9pHcmBFtc4DWR0OLJvz8rFEzdme6Pp2TZRWe5OrGZEHVSHodTb5cYfhEt/ZgboPeVZZzz9FipCUi4EMWqyqKIXfQxTW8YdqoisIJyA4TUhFa2SyU0fNHjDEy9sm/JSYqqFy/nvYWsjO2nPXdsbbnpLuHUwoM2IZ+D/mTaN6pgcIPS+iyKbVgV3wBqFiqGHbuasTyn7SE6ZBnw3Xr5QOHQ==
<::> VerificationService.createWorkflowContext: Request NOT authenticated by WS-Security framework
<BPMAuthorizationServiceImpl::lookupUser> BPMAuthorizationServiceImpl::lookupUser():: begin, userName=jstein
<BPMUserImpl::<init>> User=jstein was created
<BPMAuthorizationServiceImpl::lookupUser> User is found, user=RealmUser: jstein
<BPMPrincipalImpl::getAttribute> Attribute=languagePreference is not set. Populate principal=jstein
<::> WorkflowService:: TaskQueryService.queryTasks(): called. token = c9pHcmBFtc4DWR0OLJvz8rFEzdme6Pp2TZRWe5OrGZEHVSHodTb5cYfhEt/ZgboPeVZZzz9FipCUi4EMWqyqKIXfQxTW8YdqoisIJyA4TUhFa2SyU0fNHjDEy9sm/JSYqqFy/nvYWsjO2nPXdsbbnpLuHUwoM2IZ+D/mTaN6pgcIPS+iyKbVgV3wBqFiqGHbuasTyn7SE6ZBnw3Xr5QOHQ== ctxUser = jstein displayColumns = TASKID, TASKNUMBER, TITLE, OUTCOME optionalInformation = assignmentFilter = My keywords = null predicate = null ordering = wfn.taskNumber ASC startRow = 0 endRow = 0
<::> WorkflowService:: TaskQueryService.getCombinedPredicate(): called. token = c9pHcmBFtc4DWR0OLJvz8rFEzdme6Pp2TZRWe5OrGZEHVSHodTb5cYfhEt/ZgboPeVZZzz9FipCUi4EMWqyqKIXfQxTW8YdqoisIJyA4TUhFa2SyU0fNHjDEy9sm/JSYqqFy/nvYWsjO2nPXdsbbnpLuHUwoM2IZ+D/mTaN6pgcIPS+iyKbVgV3wBqFiqGHbuasTyn7SE6ZBnw3Xr5QOHQ== ctxUser = jstein assignmentFilter = My keywords = null predicate = null
<::> WorkflowService:: TaskQueryService.getAssignmentFilterPredicate(): called. token = c9pHcmBFtc4DWR0OLJvz8rFEzdme6Pp2TZRWe5OrGZEHVSHodTb5cYfhEt/ZgboPeVZZzz9FipCUi4EMWqyqKIXfQxTW8YdqoisIJyA4TUhFa2SyU0fNHjDEy9sm/JSYqqFy/nvYWsjO2nPXdsbbnpLuHUwoM2IZ+D/mTaN6pgcIPS+iyKbVgV3wBqFiqGHbuasTyn7SE6ZBnw3Xr5QOHQ== ctxUser = jstein assignmentFilter = My
<::> WorkflowService:: TaskQueryService.getAssignmentFilterPredicate(): completed. assignmentFilterPred = ((wfn.taskId=wfa.taskId AND wfa.isGroup =? AND ( wfa.assignee IN (?))) OR ( ( wfn.originalAssigneeUser IN (?)) AND wfn.taskId=wfa.taskId) AND wfn.isGroup =?) AND ( wfn.identityContext IS NULL )
<::> WorkflowService:: TaskQueryService.getCombinedPredicate(): completed. combinedPredicate = ((wfn.taskId=wfa.taskId AND wfa.isGroup =? AND ( wfa.assignee IN (?))) OR ( ( wfn.originalAssigneeUser IN (?)) AND wfn.taskId=wfa.taskId) AND wfn.isGroup =?) AND ( wfn.identityContext IS NULL )
ERROR: exception symbol "09732" not found in resource file.
<::> ORABPEL-09732
<::>
<::>
<::> at oracle.bpel.services.workflow.repos.PersistencyDriver.getNonTransactionService(PersistencyDriver.java:231)
<::> at oracle.bpel.services.workflow.repos.PersistencyDriver.getInstance(PersistencyDriver.java:152)
<::> at oracle.bpel.services.workflow.query.impl.TaskQueryService.queryTasks(TaskQueryService.java:213)
<::> at oracle.bpel.services.workflow.query.impl.TaskQueryServiceWSIF.queryTasks(TaskQueryServiceWSIF.java:172)
<::> at oracle.bpel.services.workflow.query.client.TaskQueryServiceWSIFClient.queryTasks(TaskQueryServiceWSIFClient.java:66)
<::> at oracle.bpel.services.workflow.query.client.AbstractDOMTaskQueryServiceClient.queryTasks(AbstractDOMTaskQueryServiceClient.java:180)
<::> at project1.Class1.TryTask(Class1.java:55)
<::> at project1.Class1.main(Class1.java:91)
<::> Caused by: java.lang.NullPointerException
<::> at oracle.bpel.services.workflow.repos.PersistencyDriver.getDatasourceName(PersistencyDriver.java:177)
<::> at oracle.bpel.services.workflow.repos.PersistencyDriver.initNonTransactionDataSource(PersistencyDriver.java:198)
<::> at oracle.bpel.services.workflow.repos.PersistencyDriver.getNonTransactionService(PersistencyDriver.java:224)
<::> ... 7 more
<2008-10-14 23:59:00,952> <ERROR> <oracle.bpel.services> <::>
java.lang.NullPointerException
at oracle.bpel.services.workflow.repos.PersistencyDriver.getDatasourceName(PersistencyDriver.java:177)
at oracle.bpel.services.workflow.repos.PersistencyDriver.initNonTransactionDataSource(PersistencyDriver.java:198)
at oracle.bpel.services.workflow.repos.PersistencyDriver.getNonTransactionService(PersistencyDriver.java:224)
at oracle.bpel.services.workflow.repos.PersistencyDriver.getInstance(PersistencyDriver.java:152)
at oracle.bpel.services.workflow.query.impl.TaskQueryService.queryTasks(TaskQueryService.java:213)
at oracle.bpel.services.workflow.query.impl.TaskQueryServiceWSIF.queryTasks(TaskQueryServiceWSIF.java:172)
at oracle.bpel.services.workflow.query.client.TaskQueryServiceWSIFClient.queryTasks(TaskQueryServiceWSIFClient.java:66)
at oracle.bpel.services.workflow.query.client.AbstractDOMTaskQueryServiceClient.queryTasks(AbstractDOMTaskQueryServiceClient.java:180)
at project1.Class1.TryTask(Class1.java:55)
at project1.Class1.main(Class1.java:91)
Caught workflow exception:
Process exited with exit code 0.Although the versions 10.1.3.4 and 10.1.3.3 are close and should be able to use 10.1.3.4 JDev for most 10.1.3.3 development, the human tasks is the one exception. 10.1.3.3 had a few bugs fixed therefore the jar file used in JDev 10.1.3.4 may not be compatible with 10.1.3.3.
I would either use JDev 10.1.3.3 or upgrade SOA Suite to 10.1.3.4
cheers
James -
Address family not supported by protocol family: bind
Over the past few days a number of users have reported connection issues with our application. We've been able to track the problem to this line of code:
ServerSocketChannel sc = ServerSocketChannel.open();
sc.socket().bind(new InetSocketAddress("localhost", 0)); <- error thrown
The following error is thrown:
java.net.SocketException: Address family not supported by protocol family: bind
sun.nio.ch.Net.bind(Native Method)
sun.nio.ch.ServerSocketChannelImpl.bind(Unknown Source)
sun.nio.ch.ServerSocketAdaptor.bind(Unknown Source)
sun.nio.ch.ServerSocketAdaptor.bind(Unknown Source)
I've read this is something to do with an IPv4 / IPv6 issue. But what I don't understand is that our users have had this working fine for months and we've never had any problems in the past, but within the last couple of days 10 people have contacted us, all with the same issue. We've not released any patches so we've not introduced the problem. Does anyone know what might have changed in the past few days? Did Microsoft release a patch to modify the IPv 4 / 6 protocols?
Apparently the issue might be resolved in Java7, but we have thousands of users, and rolling out a new version of Java is a big upheaval.
Any ideas???
BBBIt uses a JRE that is isolated for our application, so Java updates 'shouldn't' affect it. I have a sneaking suspicion that a Vista update may have changed something, but I can't be sure.
I'm working through the problem with one of our users, and I've changed the code from:
ServerSocketChannel sc = ServerSocketChannel.open();
sc.socket().bind(new InetSocketAddress("localhost", 0));To
ServerSocket sc = new ServerSocket();
sc.bind(new InetSocketAddress("localhost", 0));This works and I'm able to get an available port. However, later in the code it runs this section of code to connect the socket:
void connect() throws IOException, InterruptedException {
int retry;
for (retry = 0; retry < MAX_RETRY; retry++) {
try {
channel = SocketChannel.open();
channel.configureBlocking(false);
//connect to server
channel.connect(serverAddr);
//register events to listen
channel.register(selector, SelectionKey.OP_CONNECT);
while (!channel.isConnected()) {
if (selector.select(1) > 0) {
Set readyKeys = selector.selectedKeys();
Iterator i = readyKeys.iterator();
while (i.hasNext()) {
SelectionKey key = (SelectionKey) i.next();
i.remove();
SocketChannel keyChannel = (SocketChannel) key
.channel();
if (key.isConnectable()) {
if (keyChannel.isConnectionPending()) {
keyChannel.finishConnect();
break;
break;
} catch (Exception e) {
channel.close();
channel = null;
try {
Thread.sleep(150);
} catch (Exception ex) {
if (retry == MAX_RETRY) {
throw new InterruptedException("Maximum retry number reached!");
channel.register(selector, SelectionKey.OP_READ);
}It's now falling over on this line:
channel.connect(serverAddr);
java.net.SocketException: Address family not supported by protocol family: connect
serverAddr is a InetSocketAddress, channel is a SocketChannel, which appears not to be supported on the machine that are having these connection issues.
I'll be honest, I have little or no experience of implementing Sockets, and since I can't replicate the actual problem that our users are having it makes it even hard to fix it or try to code a workaround. The code above is from an OpenSource project, i.e. it's not something I wrote. In other words, I'm kinda up the 'proverbial creek'!
Could anybody be kind enough to steer me in the right direction for a workaround that doesn't use a SocketChannel? It really would be appreciated!
BBB
Maybe you are looking for
-
i need help updating my phone to the ios 6 i have contacted verizon and they have called apple however it would not update at my house my boyfriend have the iphone 4 and his updated fine. they told me to use itunes on a computer to do it and it still
-
We have an Intranet site created using 10g. When users choose to view larger text size from the Explorer View>Text Size>Largest, the text size on screen does not change. Can anyone tell me why, is there something we are doing wrong? Anyone else have
-
Can't download new face recognition driver for Qosmio G50
Hi! Can't download new face recognition driver for G50 hinted by TEMPRO. Possibly bad link: http://81.27.174.53/tedd-files2/0/fareg-20081009112217.zip
-
Does Siri speaks Portuguese on the new iphone5?
Does Siri speaks Portuguese on the new iphone5?
-
I have this error when I try to login as root (I have just installed MySQL with pacman): ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (13) I searched @ google and I found thousands of posts with t