BPM 7.2 Tasks not getting assigned to user UWL

Hi All,
I am on CE7.2 and downlaoded NWDS for the same.
I follwed Donka Dimitrova's article to create a BPM process (name, age) application. I had earlier tried it on CE 7.11 and it worked fine. But now on CE7.2 when I initiate the process from /nwa, the first user (user assigned to the very first task) doesnt get it in UWL. I .looked into nwa and It seems like the tasks itself are not getting created because there are no tasks under "Manage Tasks" option.
Is there some configuration missing.
Note: I have assigned tasks to users in the Process in IDE and EP-BPEM UWL configuration is done.
Prem

hi,
have you run the configuration wizard?
http://yourhost:port/nwa/cfg-wizard
there is a task for BPM. just execute it.
if you have already run the wizard, you can go to following place to check and make further change if required.
http://yourhost:port/nwa/sys-config
select "Applications" tab
put "bpembaseear" in the name filter, select that application in the result table
you will see the properties tab
if your locale is not there, you can fix now.
Best regards,
John

Similar Messages

Roles not getting assigned to User OIM11gR2

Hi Experts,
I have created a Role, Access policy for ACF2 and a rule for automatically provision Users whose Company Code = 200 (company code is a UDF)
The records are getting provisioned if I assign the role manually to the user and run Evaluate user Policies task. But if i reconcile the user from trusted resource, the users with company code are not getting even the role assigned to them.
Am i missing something. Please help me out!!

hi,
have you run the configuration wizard?
http://yourhost:port/nwa/cfg-wizard
there is a task for BPM. just execute it.
if you have already run the wizard, you can go to following place to check and make further change if required.
http://yourhost:port/nwa/sys-config
select "Applications" tab
put "bpembaseear" in the name filter, select that application in the result table
you will see the properties tab
if your locale is not there, you can fix now.
Best regards,
John

BPM task not getting created

I have modelled a BPM process and attached Webdynpro UI's to its human activities.
I am able to start the process from the Process Repository, but the tasks are not getting visible in the Uniiversal Worklist of the Task Principle Owner.
When I'm logging on with administrator id, and going to Manage Processes screen, I'm seeing the active task correctly highlighted.
Also, when I'm logging on with administrator id, and going to Manage Tasks screen, I'm not seeing any tasks being created.
What may be the problem?

There was a problem with setting the Locale in the BPM configuration wizard. After fixing it, the first human activity is getting created and task is assigned. When I'm completing the first human activity and submitting the form, task is not getting assigned to the user/principle owner of the second human activity.
When I open Manage Process, and see the history, I see the process status as Suspended and the following log:
15-Jun-2010 15:57:49 Task completed Task completed by BPEMUser, Operator Human interaction
15-Jun-2010 15:56:44 Event notification cannot be sent Event notification could not be sent to recipients <mail id removed> for task instance ID 35e69fcb-788e-11df-c7cd-02004c4f4f50. Problem: Cannot send e-mail because the e-mail session cannot be retrieved Human interaction
15-Jun-2010 15:56:43 Task created Task created Human interaction
No task created for second human activity.
What may be the problem now?

UWL : New tasks are not getting populated in the UWL

Hi Experts,
I<b> configured my uwl to my backend system , the completed tasks are getting populated in the UWL but the New tasks and in progress tasks are not getting populated in the UWL.(some thing strange).</b>
When i am trying to configure the universal worklist system ,its givin me a caution message as <b>System SHDCLNT012 does not support optimized delta pull</b> . where SHDCLNT012 is the system alias name.
Is this the problem for not populating the new tasks in the UWL?
Please provide me the solution..
Thanks & Regards,
Sateesh

Hi Sateesh,
This message will appear if either the background jobs are not scheduled, or UWL cannot tell that the background jobs are scheduled. The message no longer appears once you ensure the background jobs are scheduled to run via the user id UWL_SERVICE and that user is mapped to my portal user ID UWL_SERVICE.
Kai

Purchase order output type NEU is not get assigned automatically

Dear All,
when i am creting purchase order the output type NEU is not get assigned automatically.
I have maintained message condn record for NEU and for specific PO doc type NB.
same problame i was facing for the inventory docuemnts but i was resolved by running one SAP std program so please guide me if any such program is available for Purchasing documents also or any other setting i am missing to make.
Pl suggest
Regards,
Vimlesh

Hi
Please check the following in customization.Dont check in NACE you may miss something like fine tune control
1) Check the Message determination procedure is having the NEU output type
2) Check the std Message determination procedure is assigned to PO
3) Check the output type for the Access sequence, default data for transmission medium and partner function VN, Language & Form assigned to it
4) Check the Access sequence for the condition tables
5) Check the condition record in MN04/MN05
6) Check the purchasing group has printer assignement
7) Check the fine tuen control for operation 1 & 2 for message type.
Hope your problem now solved.
Thanks /karthik
Edited by: Karthik on Aug 13, 2009 5:29 PM

Products not getting assigned to product catlog

Hi,
I am learning crm and needed your advice on product catlog.
My products are not getting assigned to product catlog (both automatic as well as manual).
There are 2 queries related to creation of sub area -
1) I wanted to know, what comes in Cat Area type - ie does it remains blank or something is assigned to it?
2) When I enter my product ID under item overview, the errors comes as product 0000..510010 does not have data for sales management.
Please advice me on above 2 queries.
Thanking you in advance.
Regards.
Edited by: Rachna Adani on Jun 28, 2009 7:04 PM

1) I wanted to know, what comes in Cat Area type - ie does it remains blank or something is assigned to it?
Catalog area is a kind of categorization or grouping or hierarchy in a catalog. For example, if yuo are creating a catalog for a super market, then Clothes, Groceries, Toys etc. could be Cat. Areas. With in a catalog area one can define more sub-areas - for example, in Toys, you can have sub-areas either by Age 5-10, Age 11-15 etc or by Brand. This is the case of manual assignment. In case of *automatic assignment, the catalog area and sub-ares will be part of the Product hierarchy.
All you need is a definition for the Catalog Areas. You need to assign products only if there are any in that area or sub-area.
2) When I enter my product ID under item overview, the errors comes as product 0000..510010 does not have data for sales management.
Did you download them from ERP system? Then you must download the Sales Org data. In the same token, if you have created this product in CRM, then you should maintain the sales data tab,

New user creation in AE- user group not getting assigned

Hi All,
Here is a typical case, wherein when we create a new user with AE for the production system, the user gets created and the roles are also assigned but the user group is not getting assigned. The user group is being fetched from a table from the backend and all that is working fine. Infact in order to test the configurations we even created a new user in the production instance of AE giving the development system as the target system for user creation and in this case the user was successfully created and the user group is also assigned. The problem is arising only when the target system is production system.
Connectors are all working fine, but we are unable to think of a reason. Can somebody help us on this?

Hi Vani,
If you are provisioning the user group using user defaults, check that production system is selected in the user defaults configured. Configuration -> user defaults. You can define any user default system, but for perticuticular user defaults that is applicable define all the systems, in which you want user defaults to be provisioned.
Kind Regards,
Srinivasan

Roles Not Getting assigned during trusted reconn in OIM 11gR2

Hi Experts,
I have created a Role, Access policy for ACF2 and a rule for automatically provision Users whose Company Code = 200 (company code is a UDF)
The records are getting provisioned if I assign the role manually to the user and run Evaluate user Policies task. But if i reconcile the user from trusted resource, the users with company code are not getting even the role assigned to them.
Am i missing something. Please help me out!!

I followed the exact same steps to create the rule,
Search your Role > Select Your Role > Detail will be opened > Members Tab > Right top Corner > Add Rule > Select your condition
I even tried with User Type = Consultant etc with some OOTB attributes but still no luck
Once the recon is complete and user is created in OIM, i don't see the role added to user. Now, if i open the role again and edit the rule and navigate to preview results tab I see the newly created user listed in preview, and if I click Save without any changes, user gets added to the role.
I think this could be due to our custom event handler as mentioned by NN, please let me know if you have any other clue to debug this issue.

Reg:tasks are not getting displayed in the uwl mss for particular user

hi all
Tasks are not getting updated in the MSS under tasks tab for particular user in EP.can any one please share their exp and knowledge on this how to reslove it.
Thanks in advance.
Deepika

Hi Sateesh,
This message will appear if either the background jobs are not scheduled, or UWL cannot tell that the background jobs are scheduled. The message no longer appears once you ensure the background jobs are scheduled to run via the user id UWL_SERVICE and that user is mapped to my portal user ID UWL_SERVICE.
Kai

Task Does not get triggered when User is created through API

Hi,
Each new user in our OIM environment is supposed to have a iPlanet account. I have configured the access policy for the same and it works.There is also a process task which needs to be triggered once the user is successfully created in the DS. Following is my issue:
1.When the new user is created through the admin console, the user is provisioned successfully to DS as well because of the access policy and the task also gets triggered successfully.
2. There is an approval workflow for another resource, at the end of which a user needs to be created through APIs in OIM. The user gets created successfully in OIM and also get provisionined to DS just like in the above use case. However, the task fails in this case. I see that the task is being triggered from the user's resource profile, but the status is rejected.
Can someone please tell me why is this happening. I initially though there was some issue with my adapter for the task, but in case 1 it works just fine.
Following is the exception I get as soon as the iPlanet connector finishes creating the user in DS:
java.lang.ClassCastException: java.lang.String
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpSETFIELDSONUSERCREATE.implementation(adpSETFIELDSONUSERCREATE.java:51)
at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
Thanks,
Supreetha

Hi,
Have you checked the process data that you are passing to this adapter and check the mapping of process data to the adapter variable. Try to log the value which you get from process data. I got this error when I was trying to use the literal value from process data as "true" for a boolean value. This is a bug. This value is not actually a boolean value. It threw me error too sometimes back. Either you pass the boolean value from adaptor factory as a literal value or change the type boolean both in your code and the adapter.
OIM works strangely. ;) All the best,
Manila

Tasks not getting executed as per schedule

Hello Gurus,
my query is with respect to tuxedo 7.1 / singleview 4.02.17.01.
I am facing some new issues these days with singleview.
Whenever we submit any task in singleview, it is not getting executed on its scheduled time.
this has been happening from past few days.
worstly,nothing has been found in logs.
Interestingly, twice it happened that i took down the application & after the app was brought up,these "NOT" executed tasks started automatically.
Why this could be happening?
unix file " stdout" <standard output> is getting written heavily & reaching its MAX size ( 2 GB) in less than 24 hrs.
i have changed its schedule as of now,but has it got anything with above problem?
Finally,i have generated a new "ubbconfig" for tuxedo which will help in maximising billing performance.
reason for this is in recent times i have observed that memory usage has increased .so this "ubb" contains maximum billing servers & rest minimum.if you have any idea on this,pls let me know.
your suggestions & corrections are welcome.
Thanks & Regards
Abhijeet K

Some follow up questions:
- How did you migrate (dsmig ldif or binary import)
- Did the accounts in .x have any custom password policies set?
For a "new" and a migrated entry, can you check if a passwordpolicysubentry is configured?
(search as directory manager and fetch the attribute)

Enable Task not getting triggered

Hi experts
In my Process Definition, I have a task say Task1 which has task effect as "Enable User or Access to Application" and say Task2 has task effect as "Disable User or Access to Application".
Here when I click on enable checkbox under Resource Profile, my task Task1 gets executed and enables the Application. The same will happens for Disable under same resource profile.
Also when I Disable the user at user profile level, the task Task2 gets executed and sets the RO status as Disabled. But my problem is that when I click on Enable at user profile level, the RO which is already disabled is not getting enabled. I can see Task1 task is not getting triggered.
Any early responses are appreciated.
Thanks in Advance

Look at the following System Configuration property:
XL.EnableDisabledResources
This should be set to TRUE. I think your environment must be showing it as the other way.
If that is not the case then are you sure that your user is getting Enabled with that action. Let us know, although I think that this should not occur.
Thanks
Sunny

EA2700 router not getting assigned IP address via DHCP

I'm helping my mom (remotely) set up her new EA2700 router to replace her old Linksys WRT160N router. It is currently connected to a Motorola 6121 cable modem. She also has Charter cable modem service. FYI, the WRT160N is currently working albeit it is dropping connections and losing connections from time to time. That's why she purchased this new router.
I'm trying to help her set it up manually. Unfortunately, she does not have a laptop computer. She does have an iPad and Android phone, but nothing that would allow her to connect a device with a CD to the router that would allow her to do a CD based setup. Thus, we're trying to do a manual setup.
She is able to login to the router using Safari by connecting to 192.168.1.1 so I think the basic stuff is set up properly and all the wires are connected properly. She is able to get into the main setup page. I've helped her compare the setup of the current (EA2700) router to her old WRT160N router - this took quite a while - and essentially everything is set up similarly between the old and new router. Internet connection type is set to "Automatic Configuration - DHCP." Unfortunately, the router doesn't seem to be able to get assigned an IP address from Charter. When she goes to the Status page, no IP addresses are listed. She has also clicked on both the release IP and renew IP buttons, both with no effect. She has tried power cycling both the cable modem and router, but not luck. What's going on? I see another user may have a similar issue:
http://homecommunity.cisco.com/t5/Wireless-Routers/EA2700-DHCP-reservations/m-p/561986?comm_cc=HSus&...
What can we do to fix this issue?

If mac clone is enabled, the address that it will clone is usually the mac address of the computer that can get online directly to the modem. Or it’s possible that the cable modem is only recognizing the MAC address of the old router. You may enabling MAC Address clone and clone the MAC address of the old router.

Initiator Task not visible to other users in the Group

Hi
JDeveloper 11.1.1.6, WLS 10.3.6, BPM 11.1.1.6
I have a Process and the swimlane containing the Initiator Task is assigned to a Group.
All the users in the group are able to Initiate the Task.
But when the Task is initiated, the Task is assigned to the User specifically, but not to the Group. I guess this is the default behavior.
The Human Task Assignee - defaultPerformer for the Initiator Task is uneditable in the initiator.task file.
What I was expecting is that, since the Initiator swimlane is assigned to the Group, All the users in the Group should be able to see the Tasks initiated by anyone in the Group.
I want this behavior in the Initiator type of tasks specifically. (The normal Tasks other than Initiator tasks are working as expected.)
The reason why we want this is, let us say after the task is created, and before it is submitted, there is a lot of work to be done, for example, data entry, should be done by many people in the Group.
If all the users in the Group are able to see the Initiator Task, then it will help to share the responsibility of data entry among the users of the group.
I tried Reassigning the task to Group, and it works, but we am looking for something automatically assigning to the Group when the Process is created. (We may not be using the Oracle BPM Workspace at all).
Can anyone please tell us if there is a way to make the Initiator Task automatically assigned to the Group instead of just the user?
Thanks for any help
Sameer

Hi Ashwini
Thanks for replying.
I did the same and it was working for me even if the Type is Single.
I just gave the Group name and all users were able to see the task. This is fine with me.
I just observed one more thing.
When the task is created, all the users in the Group are able to see it in 'Me & My Group'.
But the data entered by the creator is not seen by other users.
There is an action 'Save' in the Task. If the creator clicked on it, then the task is automatically 'Acquired' by the creator.
Other users in the group are able to see the task and the saved data, but are not able to Submit.
What I expected the Save button to do is only to Save the data in the Payload. Not Claim it.
Is there a way to make the payload data only to save but not to claim the task?
Thanks and Regards
Sameer

Shared Tasks not visible to other User

Hello,
I am facing a problem that I have shared Tasks of User-A to User-B. But when I open shared Task at User-B MS Outlook it opens but no tasks of User-A are visbile.
For Testing
I Shared User-A shared tasks for myself with same permissions & are visible to me.
I Shared my Tasks for User-B & are visible to User-B.
I Shared User-B Tasks & are also visible to me.
I Created new Outlook profile for User-B, Upgraded Office Version from 2007-2010, Created new Windows login Profile, login him on some other PC but still User-B is unable to View User-A shared tasks.
I login User-B on OWA (Webmail) still User-B is unable to View User-A shared Tasks.
I have checked for User Mailbox permissions but found nothing.
Please help me to resolve this issue.

Hi,
If User-A shared a calendar folder to User-B, could User-B open the shared calendar in his Outlook? or are those calendar items visiable in that time?
If yes, please separately get the
Get-MailboxFolderPermission -Identity
[email protected]:\Calendar
& Get-MailboxFolderPermission -Identity
[email protected]:\Task
And then compare their permission to find the difference entry.
Or you may directly check the User-B's permission under User-A's folder:
Get-MailboxFolderPermission -Identity
[email protected]:\Task -User [email protected]
This might not the problem on User Mailbox permissions level but Mailbox folder permissions level. Thanks.
Tony Chen
TechNet Community Support

BPM 7.2 Tasks not getting assigned to user UWL

Similar Messages

Maybe you are looking for