"BPM-70830: Deployment validation failed" when deploying from composer

Hi BPM developers,
I am trying to deploy a BPM project based on a template to Oracle BPM Suite 11.1.1.6.0 running in SOA & BPM Development VM and I get the following error :
“BPM-70830: Deployment validation failed. Cause: An unexpected error has occurred during deployment validation”
Checking the project with the Validate button returns no problem.
The weblogic log shows the following error
<Oct 30, 2012 6:13:51 AM PDT> <Error> <oracle.bpm.composer.beans.toolbar.SarExportDialogBean> <BEA-000000> <
java.lang.NullPointerException
at oracle.soa.scac.ValidateComposite.checkInterfaceInWsdlManager(ValidateComposite.java:388)
at oracle.soa.scac.ValidateComposite.validateComponentTypeReferences(ValidateComposite.java:980)
at oracle.soa.scac.ValidateComposite.validateComponentTypeServicesReferences(ValidateComposite.java:1012)
at oracle.soa.scac.ValidateComposite.doValidation0(ValidateComposite.java:502)
at oracle.soa.scac.ValidateComposite.doValidation(ValidateComposite.java:481)
at oracle.bpm.deployment.impl.ScacDeploymentService.validateProject(ScacDeploymentService.java:223)
at oracle.bpm.deployment.impl.ScacDeploymentService.generateSarFile(ScacDeploymentService.java:85)
at oracle.bpm.deployment.impl.ScacDeploymentService.deploy(ScacDeploymentService.java:150)
at oracle.bpm.pml.service.impl.ComposerMetadataServiceImpl.deployProject(ComposerMetadataServiceImpl.java:355)
at oracle.bpm.composer.service.ProjectDeploymentService.deployProject(ProjectDeploymentService.java:157)
at oracle.bpm.composer.service.ProjectDeploymentService.deploySelectedProject(ProjectDeploymentService.java:71)
at oracle.bpm.composer.beans.toolbar.SarExportDialogBean.deployProject(SarExportDialogBean.java:635)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597) .....
By the way, I have been following the script from the "Getting Started with Oracle BPM Suite 11gR1" book if anyone stumbled upon the same issue.
TIA
Yiannis Tsesmelis

You're right, I restarted the server again and again...
I have just opened the sr in metalink, it has been confirmed as a bug. Unfortunately there's no way to workaround. What I can do now is waiting for the solution.

Similar Messages

Oracle BPM: After deploying from composer

Hi,
..... JDev version: 11.1.1.7.0 ......
- I finished project and deployed it and users started to work on it.
- Some users has some tasks in tasklist.
Now I made some modifications and re-deployed the project from bpm composer with the same Revision ID I found all users tasks was gone ( all users has 0 tasks ), is there any way to back these tasks again?
My question in other way: How can I keep running instances on after redeployment from bpm composer?
Thanks

In version 11.1.1.7, you can keep the existing instances when redeploying using the same version number if you check the "Keep running instances" check box when redeploying.
If you do this and the new and existing composites are incompatible, the deployment will simply fail. When this occurs, you simply increase the version number, uncheck the check box and redeploy.
That said, you might want to log in as an administrator into the Workspace and click the "Process Tracking" tab and see if your instances are in a suspended state and can be resumed.
Dan

Oracle Server 11.2.0.1.0 64-bit fails when invoked from InstallShield

I'm trying to install the Oracle Server 11.2.0.1.0 64-bit on Windows 2008 SP1 from the InstallShield 2010.
The installation is silent. Invoked by command line:
J:\Oracle_11.2.0_x64\OracleServer_11.2.0.1_x64\setup.exe ORACLE_HOME_NAME="ARAXI_11" -silent -nowelcome -force -nowait -noconsole -loglevel fine -noconfig -ignoreSysPrereqs use_prereq_checker=false -responseFile C:\Oracle\11.2.0\installation\scripts\SVRCUSTOM11.2.0.rsp
The problem is that when the command is invoked from command line (cmd), the installation is successful.
However, when the same command is invoked from under the InstallShield, the installation fails on Architecture requirement check:
INFO: *********************************************
INFO: Architecture: This is a prerequisite condition to test whether the system has a certified architecture.
INFO: Severity:CRITICAL
INFO: OverallStatus:OPERATION_FAILED
INFO: All forked task are completed at state performChecks
INFO: Completed background operations
INFO: Moved to state <performChecks>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating state <performChecks>
INFO: Using default Validator configured in the Action class oracle.install.ivw.db.action.PrereqAction
INFO: Adding ExitStatus PREREQUISITES_NOT_MET to the exit status set
SEVERE: [FATAL] [INS-13013] Target environment do not meet some mandatory requirements.
CAUSE: Some of the mandatory prerequisites are not met. See logs for details. C:\Oracle\Inventory\logs\installActions2011-05-19_12-58-13PM.log
ACTION: Identify the list of failed prerequisite checks from the log: C:\Oracle\Inventory\logs\installActions2011-05-19_12-58-13PM.log. Then either from the log file or from installation manual find the appropriate configuration to meet the prerequisites and fix it manually.
INFO: Advice is ABORT
INFO: Adding ExitStatus INVALID_USER_INPUT to the exit status set
The questions:
1. Why the requirement checks give different results when installation is invoked from CMD and from InstallShield?
2. Why the requirement checks are done despite the parameters "-ignoreSysPrereqs" and "use_prereq_checker=false"?
3. What should I do to get the installation pass (either remove the check or make it satisfying)?
PS. The 32 bit Oracle Server installation on Windows 2003 works without problem when invoked from InstallShield.

Please use 2008R2 if you want to install 11gR2 versionThank you for that update. Possibly it will help me to solve another trouble.
Regarding the problem I described, the issue is that I install Oracle Client 32 bit prior to trying to install Oracle Servier 64 bit.
The Oracle Client setup had started RemoteExecService.exe 32 bit process. And the process remained running after the installation completed.
The Oracle Server setup utilizes the running RemoteExecService.exe process. Since the process is 32 bit, the architecture requirement check had failed.
I've added to my script killing the process
taskkill /F /IM RemoteExecService.exe
before invoking the Oracle Server installation.
That way the Oracle Server setup starts another RemoteExecService.exe process and the new process is 64 bit.
The architecture requirement succeed.

Opening Excel Workbook Fails when run from Scheduled Task on Windows Server 2008 Rw

Hi,
I have a little vbs script that instantiates the Excel.Application object and then opens a work book to perform some tasks on it. The script runs fine when run from the command line. When I attempt to run it as a scheduled task (it is supposed to update
data that is pulled from a SQL Server at regular intervals), it fails with the following error:
Microsoft Office Excel cannot access the file 'c:\test\SampleWorkbook.xlsm'. There are several possible reasons: .....
The file does exist. The path reported in the error is correct. The account under which the task is running is the same account I use to run it from the command line. User Account Control is not enabled, and the task is set up to run with highest privileges.
When I run the same script through the Task Scheduler from a Windows Server 2003 machine, it works without issue.
I was just wondering if somebody on this forum has run into a similar issue in connection with Windows Server 2008 R2 and figured out what the magic trick is to make it work. I'm sure it is rights related, but I haven't quite figured out what which rights
are missing.
Thanks in advance for any advice you may have.

This is truly killing me ... trying to get it working on Windows Server 2012 without success.
I desperately need to automate running Excel macros in a "headless" environment, that is non-interactive, non-GUI, etc.
I can get it to work using Excel.Application COM, either via VBScript or Powershell, successfully on many other Windows systems in our environment - Windows Server 2008 R2, Windows 7 (32-bit), etc., -BUT-
The two servers we built out for running our automation process are Windows Server 2012 (SE) - and it just refuses to run on the 2012 servers - it gives the messages below from VBScript and PowerShell, respectively-
I have tried uninstalling and re-installing several different versions of Microsoft Excel (2007 Standard, 2010 Standard, 2010 Professional Plus, 32-bit vs. 64-bit, etc.), but it makes no difference.
Would be extremely grateful if any one out there has had any success in running Excel automation on Server 2012 in a non-interactive environment that they could share.
( I have tried adding the "%windir%\syswow64\config\systemprofile\desktop"
folder, which did fix the issue for me when testing on Windows Server 2008 R2, but sadly did not resolve it on Windows Server 2012 )
[VBScript error msg]
Z:\TestExcelMacro.vbs(35, 1) Microsoft Office Excel: Microsoft Office Excel cannot
access the file 'Z:\TestExcelMacro.xlsm'. There are several possible reasons:
• The file name or path does not exist.
• The file is being used by another program.
• The workbook you are trying to save has the same name as a currently open work
[Powershell error msg]
Exception calling "Add" with "0" argument(s): "Microsoft Office Excel cannot open or save any more documents because th
ere is not enough available memory or disk space.
To make more memory available, close workbooks or programs you no longer need.
To free disk space, delete files you no longer need from the disk you are saving to."
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : ComMethodTargetInvocation
You cannot call a method on a null-valued expression.
+ CategoryInfo : InvalidOperation: (:) [], RuntimeException
+ FullyQualifiedErrorId : InvokeMethodOnNull

VALIDATION FAILED when setting up mobileme account on ipad

I get this same problem when trying to setup my "Find Iphone" on my ipad.
I first try to add my mobileme account as follows: settings > mail, contacts calendars > mobile me
when I put in my account login and password, i get the following response: "VALIDATION FAILED: the identity of this ipad could not be validated."
Please advise. Thanks!

I get this same problem when trying to setup my "Find Iphone" on my ipad.
I first try to add my mobileme account as follows: settings > mail, contacts calendars > mobile me
when I put in my account login and password, i get the following response: "VALIDATION FAILED: the identity of this ipad could not be validated."
Please advise. Thanks!

List data validation failed when creating a new list item but does not fail when editing an existing item

Dear SharePoint Experts,
Please help.
Why does my simple formula work in Excel but not-work in SharePoint?
Why does this formula...
=IF([Request Type]="Review",(IF(ISBLANK([Request Date]),FALSE,TRUE)),TRUE)
...work in Excel but fail when I try to use it in SharePoint?
The intent of this formula is the following...
If the field "Request Type" has the value "Review" and the field "Request Data" is blank then show FALSE, otherwise show TRUE.
SharePoint saves the formula, but when a list item is saved where the formula is implemented, (under List Settings, List Validation), SharePoint does not, say anything other than that the formula failed.
Note that the "list data validation failed" error only happens when I am creating a new item-- the formula above works just fine when one is trying to Save on the edit form.
Can you help?
Thanks.
-- Mark Kamoski

Dear Jason,
I appreciate your efforts.
However, it seems to me that this statement of yours is not correct...
"If it meet the validation formula, then you can new or edit the item, otherwise, it will throw the 'list data validation failed' error, it is by design".
I believe this is NOT the answer for the following reasons.
When I create a new item and click Save, the validation error is "list data validation failed".
When I edit an existing item and click Save, the validation error is "my custom error message" and this is, I believe, the way it needs to work each time.
I think, at the core, the error my formula does not handle some condition of null or blank or other default value.
I tried a forumla that casts the date back to a string, and then checked the string for a default value, but that did not work.
I tried looking up the Correlation ID in the ULS when "list data validation failed" occurs, but that gave no useful information because, even though logging was set to Verbose, the stack trace in the error log was truncated and did not given any
good details.
However, it seems to me that SharePoint 2013 is not well-suited for complex validation rules, because...
SharePoint 2013 list-level validation (NOT column-level validation) allows only 1 input for all the multi-field validation formulas in a given list-- so, if I had more than 1 multi-field validation rule to implement on a given list, it would need to be packed
into that single-line-of-code forumla style, like Excel does. That is not practice to write, debug, or maintain.
SharePoint 2013 list-level validation only allows 1 block of text for all such multi-field validation rules. So that will not work because I would have something like "Validation failed for one or more of the following reasons-- withdrawal cannot exceed
available balance, date-of-birth cannot be after date-of-death,... etc". That will not work for me.
The real and awesome solution would simply be enhancing SP 2013 so that column-level validation forumlas are able to reference other columns.
But, for now, my workaround solution is to use JavaScript and jQuery, hook the onclick handler on the Save button, and that works good. The only problem, is that the jQuery validation rules run before any of the column-level rules created with OOTB
SP 2013. So, in some cases, there is an extra click for the enduser.
Thanks,
Mark Kamoski
-- Mark Kamoski

Unit test runs perfectly fine with NUnit but fails when run from TestExplorer

Hello all,
I have a TestProject, Harmony.Tests. In there, I have a method AddApplicationEvent()
which calls another method Send(InvokeRequestMessage requestMessage) which calls a webservice (OperationHandlerBrokerWebService).
The code snippet looks like this. This is not the complete code but a part where we are calling the web service. It fails on the underlined Italic line of code.
OperationHandlerBrokerWebService brokerService = new OperationHandlerBrokerWebService();
brokerService.UseDefaultCredentials = true;
brokerService.Url = address;
brokerService.Timeout = timeoutInMilliseconds;
byte[] serializedResponseMessage = brokerService.InvokeOperationHandler(serializedRequestMessage);
The same test works and passed fine when I ran it with NUnit, but failed with following exception when I tried to run it from TestExplorer.
Test Name: AddApplicationEvent
Test FullName: N4S.Harmony.Tests.CaseManagement.HarmonyFacadeTests.AddApplicationEvent
Test Source: d:\TFS\TMW\Dev\TMWOnline\Harmony\N4S.Harmony.Tests\CaseManagement\HarmonyFacadeTests.cs : line 665
Test Outcome: Failed
Test Duration: 0:00:00.296
Result Message:
SetUp : Message returned System.Web.Services.Protocols.SoapException: Server was unable to process request. ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.ArgumentException: Invalid token for impersonation - it cannot be duplicated.
at System.Security.Principal.WindowsIdentity.CreateFromToken(IntPtr userToken)
at System.Security.Principal.WindowsIdentity..ctor(SerializationInfo info)
at System.Security.Principal.WindowsIdentity..ctor(SerializationInfo info, StreamingContext context)
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle._SerializationInvoke(Object target, SignatureStruct& declaringTypeSig, SerializationInfo info, StreamingContext context)
at System.Reflection.RuntimeConstructorInfo.SerializationInvoke(Object target, SerializationInfo info, StreamingContext context)
at System.Runtime.Serialization.ObjectManager.CompleteISerializableObject(Object obj, SerializationInfo info, StreamingContext context)
at System.Runtime.Serialization.ObjectManager.FixupSpecialObject(ObjectHolder holder)
at System.Runtime.Serialization.ObjectManager.DoFixups()
at System.Runtime.Serialization.Formatters.Binary.ObjectReader.Deserialize(HeaderHandler handler, __BinaryParser serParser, Boolean fCheck, Boolean isCrossAppDomain, IMethodCallMessage methodCallMessage)
at System.Runtime.Serialization.Formatters.Binary.BinaryFormatter.Deserialize(Stream serializationStream, HeaderHandler handler, Boolean fCheck, Boolean isCrossAppDomain, IMethodCallMessage methodCallMessage)
at System.Runtime.Serialization.Formatters.Binary.BinaryFormatter.Deserialize(Stream serializationStream)
at N4S.Forms.OperationHandlerBroker.AMessage.DeserializeMessage(Byte[] serializedMessage)
at N4S.Forms.OperationHandlerBroker.WebServiceServer.BrokerService.InvokeOperationHandler(Byte[] serializedInvokeRequestMessage)
--- End of inner exception stack trace ---
expected: <0>
but was: <1>
Result StackTrace:
at N4S.Harmony.Tests.TestHelper.InvokeOperation(OperationHandler handler, OperationHandlerInput input, Boolean expectedToWork) in d:\TFS\TMW\Dev\TMWOnline\Harmony\N4S.Harmony.Tests\TestHelper.cs:line 136
at N4S.Harmony.Tests.TestHelper.LoginAsUser(String username, String password) in d:\TFS\TMW\Dev\TMWOnline\Harmony\N4S.Harmony.Tests\TestHelper.cs:line 394
at N4S.Harmony.Tests.TestHelper.Login(TestUserName requestedUser) in d:\TFS\TMW\Dev\TMWOnline\Harmony\N4S.Harmony.Tests\TestHelper.cs:line 377
at N4S.Harmony.Tests.TestHelper.LoginAsAdvisor() in d:\TFS\TMW\Dev\TMWOnline\Harmony\N4S.Harmony.Tests\TestHelper.cs:line 230
at N4S.Harmony.Tests.CaseManagement.HarmonyFacadeTests.Login() in d:\TFS\TMW\Dev\TMWOnline\Harmony\N4S.Harmony.Tests\CaseManagement\HarmonyFacadeTests.cs:line 76
at N4S.Harmony.Tests.CaseManagement.HarmonyFacadeTests.SetupTest() in d:\TFS\TMW\Dev\TMWOnline\Harmony\N4S.Harmony.Tests\CaseManagement\HarmonyFacadeTests.cs:line 67
I am not sure what causing the issue. I checked the Credentials, Windows Identity during both the test run and there is no difference. Please advise !!
Thanks,
Deepak

Hi Tina,
Thanks for your reply.
I do have NUnit adapter installed. I even noticed that the test runs fine with NUnit GUI and also if I run it through Resharper Test Explorer window.
As you can see in the image above the same test is passed when I ran it from Resharper Unit Test Explorer window but fails when I ran it from Test Explorer window. I also captured the information on fiddler.
There was a significant difference in the Header Content length. Also under the User-Agent property the protocol versions are different.
Not sure why VSTest ExecutionEngine is picking a different version.
The UnitTest in question is calling a webservice method which in turn calls a method from another referenced project.
Web Service class
using System;
using System.Web.Services;
using N4S.Forms.OperationHandlerBroker.Server;
using NLog;
namespace N4S.Forms.OperationHandlerBroker.WebServiceServer
/// <summary>
/// The operaton-handler broker service.
/// </summary>
[WebService(Description = "The N4S Forms Operation-Handler Broker Web-Service.", Name = "OperationHandlerBrokerWebService",
Namespace = "N4S.Forms.OperationHandlerBroker.WebServiceServer")]
[WebServiceBinding(ConformsTo = WsiProfiles.BasicProfile1_1)]
public class BrokerService : WebService
{ /// <summary>
/// Calls <see cref="HandleRequest"/>. Updates performance-counters.
/// </summary>
/// <param name="serializedInvokeRequestMessage">the binary-serialized <see cref="InvokeRequestMessage"/></param>
/// <returns>the binary-serialized response message</returns>
[WebMethod(BufferResponse = true, CacheDuration = 0, Description = "Invokes the requested operation-handler and returns a binary-serialized response-message.", EnableSession = false)]
public byte[] InvokeOperationHandler(byte[] serializedInvokeRequestMessage)
logger.Trace(Strings.TraceMethodEntered);
PerformanceMonitor.RecordRequestStarted();
InvokeRequestMessage requestMessage = (InvokeRequestMessage) AMessage.DeserializeMessage(serializedInvokeRequestMessage);
InvokeResponseMessage responseMessage;
try
responseMessage = HandleRequest(requestMessage);
PerformanceMonitor.RecordSuccessfulRequest();
catch (Exception)
PerformanceMonitor.RecordFailedRequest();
throw;
finally
PerformanceMonitor.RecordRequestEnded();
logger.Trace(Strings.TraceMethodExiting);
return AMessage.SerializeMessage(responseMessage);
UnitTest snippet
OperationHandlerBrokerWebService brokerService = new OperationHandlerBrokerWebService();
brokerService.UseDefaultCredentials = true;
byte[] serializedResponseMessage = brokerService.InvokeOperationHandler(serializedRequestMessage);
Please advise.
Thanks,
Deepak

OLE Program works in debug mode fails when run from F8

Hello,
I have implemented a code from this forum for sending documents to printer, as below, but although it works well in debug mode, it fails when I execute directly from SE38? Any idea?
Best Regards,
Didem GUNDOGDU
CREATE OBJECT gs_word 'WORD.APPLICATION'.
SET PROPERTY OF gs_word 'Visible' = '0'.
CALL METHOD OF gs_word 'Documents' = gs_documents .
CALL METHOD OF gs_documents 'Open' = gs_newdoc
EXPORTING
#1 = p_filep .
CALL METHOD OF gs_word 'ActiveDocument' = gs_actdoc.
CALL METHOD OF gs_actdoc 'PrintOut' .
CALL METHOD OF gs_word 'Quit' .

Hi Didem,
Just a suggestion: could you print syst-subrc after each method call? Perhaps that can give you a clue.
Regards,
John.

Crystal Reports 2008 fails when called from e Web Service under 64bit OS

I have discovered that Crystal Reports 2008 doesn't work when called from a Web Service running under 64bit Windows platforms (in my case Windows 2003 Server and Windows XP 64bit); practically no object is instantiated. I've tried several solutions without success.
Before creating a wrapper component to use under COM+, is there anybody who has a better and cheaper solution than creating another component to wrap CR 2008 ?

Hi Sergio,
Before I mark this post as assumed answered I would just like to say and re-iterate that at this time there is no one answer and we fully understand your concerns. As you know in CR 6.0 it came in 16 and 32 bit versions because at the time 32 bit was relatively new but 16 bit was the norm. This is also true for 32 to 64 bit, 32 is the norm and 64 bit is relatively new. We know and are well aware 64 bit is the future and we are working as quickly as we can to move in that direction. Because of the complexity of the Product it's not simply a matter of re-compiling all of our dll's in 64 bit format. The core of our data connectivity with our database drivers which are dependant on third party clients must also need to support 64 bit modes. This as well as Printer drivers also need to be 64 compatable, there are a multitude of dependencies that we rely on that must add 64 bit support. As a programmer you are well aware of the issues around Thunking back and forth between 32 to 64 bits, it can cause delays and potentially loss of data which is a whole other issue. Not to mention also that we would have to ship both versions potentially doubling the size of the distribution packages or doubling the size of the dll's to have the ability to work in both modes. Relatively speaking of course, it would not be double the size but the variables would need to be able to allocate 32 or 64 memory blocks.
The other option is to produce 2 separate versions, this alone is a massive project. Any issue would need to be fixed in separate code streams.
So I'm sure you can see it's not simply a matter of saying yes we support 64 bit. It's a massive project that is going to take time to do and we have to wait for the third party drivers to commit also.
Visual Studio .NET 2005 and 2008 is the only option if you want true 64 bit but you will be limited on what DB's you can support and export formats you can export to. They are the only drivers we did convert to 64 bit.
Thank you for your understanding
Don

Validation failed when logging in to iTunes U lecture

A student is having problems logging in to iTunes U lectures. He said he gets a validation failed message. Any suggestions? Thank you.

On the Dock at the bottom of your screen, right click on the iTunes icon, go to "Options", and make sure "Open at Login" is unchecked.

Bug in Tabular form Not Exist Validation, fails when creating multiple rows

Hi,
I have a Not Exist validation created for a Tabular form:
select 1 from my_table where col1 = :col1 and col2 = :col2Execution State: For created and Modified Rows
which is working fine when a row already there in DB
and I am trying to enter a new row with same data.
but when there's no data and I enter two rows with same data, validation does not fire, first row should allowed to enter
but for second row it should give error that data already exists, which is not happening.
for example,
let's say I have a row in DB with: 1, 2, 3
when I try to add a new row with same data ie. 1, 2, 3 validation fires and showing error, which is fine.
but let's say there's no data in DB and I am entering two rows with:
1, 2, 3
1, 2, 3
validation is not working this time, it is allowing to enter both the rows.
do I need to create a manual validation for this or what?
Apex 4.1.1.00.23
Regards,
Tauceef
Edited by: Tauceef on Dec 6, 2012 10:09 AM
Edited by: Tauceef on Dec 6, 2012 11:22 AM
Edited by: Tauceef on Dec 6, 2012 11:27 AM

Hello Tauceef,
>> Now I got it, I was under impression that it will validate one by one row before insertion,
>> but it's going to check all the rows first, then do the insertion.
Just to clear things up, the APEX engine works exactly as you describe, but this is your problem.
The APEX engine do check\validate all the rows first, one row at a time, and only if all the rows pass validation, the DML processes kick in. The DML processes work on the entire Tabular Form record set (per page view, of course).
In order for your type of validation to work (the one that queries the database), as you want it, the validation and DML actions have to run together, row by row. This is not how things work, because it’s less efficient/optimal, and may lead to a situation where a certain row can fail validation, but other row(s) already been inserted/updated/deleted into/from the database. This could be a very tricky situation.
Vikram has suggested to rely on a database constraint, and control the APEX error message. This is possible, although I’m not sure that in this case, the Tabular Form will retain all the user changes, in case of validation error. You should check it.
Another option, which Marc hinted on, is to manipulate the G_Fxx arrays. In your case, you should loop through the new rows, compute their MD5, and make sure that all the rows have different MD5 values. This is on top of the current validation, which makes sure that the new rows do not already exist in the database.
Regards,
Arie.
&diams; Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
&diams; Author of Oracle Application Express 3.2 – The Essentials and More

Journal import fails when called from PLSQL

Hi,
When journal import is called from plsql code it is failing with error in 'gllacc() Function returning without value and no data found'.
Same transaction is run succesfully from front end.
I checked both gl_interface and gl_interface_control table but couldnt find the issue.
Any info on this would be very helpful.
Thanks
Sandhya

FOR l_rec IN (SELECT ledger_id,group_id from apps.gl_interface
WHERE status='NEW'
AND user_je_source_name='GIS_DATA_CONVERSION'
GROUP BY ledger_id,group_id
ORDER BY group_id
LOOP
apps.gl_journal_import_pkg.populate_interface_control (user_je_source_name => 'GIS_DATA_CONVERSION',
GROUP_ID => l_rec.group_id,
set_of_books_id => l_rec.ledger_id,
interface_run_id =>vl_interface_id,
table_name => 'GL_INTERFACE',
processed_data_action=>'D'
COMMIT;
vl_request_id := apps.fnd_request.submit_request (application => 'SQLGL', -- application short name
program => 'GLLEZLSRS', -- program short name
description => NULL, -- program name
start_time => NULL, -- start date
sub_request => FALSE, -- sub-request
argument1 => 2065, --Data access set id
argument2 => 'GIS_DATA_CONVERSION', --Source
argument3 => l_rec.ledger_id, -- set of books id
argument4 => l_rec.group_id,
argument5 => 'N', -- error to suspense flag
argument6 => NULL, -- create summary flag
argument7 => 'N' -- import desc flex flag
COMMIT;
IF ( vl_request_id = 0 ) THEN
xxgis.gis_conv_util_pkg.debug_print_p(1,'FND_LOG','E001: Journal Import Submission Failed. ' || SQLERRM);
retcode := 2;
EXIT;
ELSE
xxgis.gis_conv_util_pkg.debug_print_p(1,'FND_LOG','P001: Submitted Journal Import Program for group id: ' || l_rec.group_id ||
'and ledger :'||l_rec.ledger_id|| ', Request ID: ' || vl_request_id);
END IF;
END LOOP;

Insert using Spatial Index fails when called from PHP

I have a stored procedure that inserts into a table with a spatial index on one of its fields.
When I run the procedure from SQL Server Management Studio it runs just fine.
When I run it from PHP, it returns the error: "INSERT failed because the following SET options have incorrect settings: 'CONCAT_NULL_YIELDS_NULL, ANSI_WARNINGS, ANSI_PADDING'. Verify that SET options are correct for use with indexed views and/or indexes
on computed columns and/or filtered indexes and/or query notifications and/or XML data type methods and/or spatial index operations"
From within Management Studio, I have tried many different combinations of settings, until I wound up with the list I have in the procedure below.
Within Managment Studio the error changes based on the options I have set, but PHP always replies with: 'CONCAT_NULL_YIELDS_NULL, ANSI_WARNINGS, ANSI_PADDING'
I have configured PHP to use the same SQL user as management studio, and I have tried both mssql_query and mssql_execute with bound parameters.
The spatial index is on the field post.location If I remove the spatial index it works, but I need the spatial index.
CREATE PROCEDURE insert_post ( @subject AS VARCHAR(250), @body AS VARCHAR(2000), @latitude AS FLOAT, @longitude AS FLOAT ) AS BEGIN
SET NOCOUNT ON
SET ANSI_WARNINGS ON
SET ANSI_PADDING ON
SET CONCAT_NULL_YIELDS_NULL ON
SET NUMERIC_ROUNDABORT OFF
DECLARE @location AS geography = geography::Point(@latitude, @longitude, 4326)
INSERT INTO post
    subject,
    body,
    location
) VALUES (
    @subject,
    @body,
    @location
END

Hi Charles
Your issue looks like it have two basic sources: (1) The connection string properties, (2) The table structure and the data which you try to insert.
(1) The connection string properties can be specified in various ways.
You can set most of them during the connection, depending on the provider which you are using. We did not get from you any information about the PHP code, so we have no information regarding this part.
The connection properties can be changed after the connection was made, which is basically what you have try to do. But we don't know what properties
are differents (since you .. the PHP code..) but you can check those properties dynamically, insert them to a table and then compare. To check all the properties you can use this post:
http://ariely.info/Blog/tabid/83/EntryId/153/SQL-Server-Get-Connection-Properties.aspx
(2) We need to understand your
table structure and compare it to yours query. Please post your DDL+DML (queries to create the table and to insert some sample data), and the full SP code
as it is now.
[Personal Site] [Blog] [Facebook]

Schema Processor fails when invoke from code

I can't get the Schema Processor to run correctly when I invoke it from a servlet (compiled from a JSP). I've tried both invoking it directly (a la XSDSample) and via Runtime.getRuntime().exec("java XSDSample report.xsd").
When I invoke it directly, it reports, "XSD-2000: (Error) Can not build schema 'http://www.example.com/Report' located at 'report.xsd'". When I invoke it via Runtime, it reports that the file parses correctly, even after I change the file to contain an invalid element.
I've checked (and re-checked) the file locations etc. I've also tried prepending a valid URI to the schema filename. All to no avail.
If anyone has working code (other than the supplied samples), please post or send it to me at: [email protected]
Thanks,
Steve

No solution.
I decided to follow Oracle's advice for virtually all the bugs and, "wait for the next version."
Hopefully their QA team monitors these discussions and tracks the reported bugs. And hopefully their developers fix the bugs. To be honest, I'm not optimistic.
At least it's free.

Mapedit fails when called from Visio, but works in Project

Hi -
I'm writing some vba code in Visio that 1. opens a selected Project file, 2. creates a Map, and 3. exports that map data to Excel. I've got the rest of the code working, but I get an error 1101 / argument value is not valid with this statement.
The MS Project code that works when run in Project is this:
Application.MapEdit name:="visio_HLS_export", Create:=True, OverwriteExisting:=True, _
DataCategory:=pjMapTasks, CategoryEnabled:=True, TableName:="tasks", _
FieldName:="Unique ID", ExternalFieldName:="TaskUID", ExportFilter:="IsMilestoneFlag"
The code in Visio is the same, except the "Application" object is replaced with my MSProject object (mspApp). I've got a similar routine set up to create the "IsMilestoneFlag" filter, and that is working fine. The filter is created in
the local organizer, then copied to Global.mpt, so it should be able to find it. Not sure what else could be causing the failure.
Set mspApp = CreateObject("MSProject.Application")
mspApp.MapEdit Name:="visio_HLS_export", Create:=True, OverwriteExisting:=True, _
DataCategory:=pjMapTasks, CategoryEnabled:=True, TableName:="tasks", _
FieldName:="Unique ID", ExternalFieldName:="TaskUID", ExportFilter:="IsMilestoneFlag"
Any ideas?

matttjo,
This might be s shot in the dark, but looking at the MapEdit Method, the only argument that is suspect when controlling Project from another app is the DataCategory argument. All other arguments are either string, or boolean. You might try adding a reference
to the DataCategory, something like:
DataCategory:=mspApp.pjMapTask
Since all arguments of the method are optional, you could try eliminating one at a time (or adding one at a time) and see which one causes the problem.
Hope this helps.
John

"BPM-70830: Deployment validation failed" when deploying from composer

Similar Messages

Maybe you are looking for