BPM an Mapping: Get the workflow instance number?

Hi everybody,
wen need in some cases the message-ID that was generated in message-mapping.
But when I take this message-ID and try to find it via SXMB_MONI the message could'nt be found due to reasons I do not know.
So now I would like to capture the BPM instance number. Is this possible in message-mapping?
Thanks regards
Mario

I doubt you would be able to get the BPM instance no. However, I don't understand why u r facing problem with message ID.
Regards,
Prateek

Similar Messages

Unable to get the composite instance for the invocation. This could be because instance has not yet been created or because the audit level for the SOA infra has been set to Off

I am on Oracle 11.1.1.7 BPM suite on W8 64 bit. I can't launch the flow trace and get the error "Unable to get the composite instance for the invocation. This could be because instance has not yet been created or because the audit level for the SOA infra has been set to Off". I have set the audit level to development at the soa-infra>SOA Administration> Common Properties > Audit level set to development and Capture Composite Instance State is Checked.
Can somebody advice.
Thanks

Can you please confirm me the following steps...
Log in to the EM console, Expand soa-infra (soa_server1) , go to the partition where your composite is been deployed, Click on your composite, On the right, click on the dropdown Settings and choose Composite Audit Level. you can choose to set the Audit Level for this composite. If you choose Inherit, it will take the settings to what the server is being set to. Otherwise, we can override it by choosing Off, Production, or Development.
Make sure your setting for that composite is not Off, keep inherit or production or development.
Thanks,
N

Unhandled exception occurred during the execution of the workflow instance

I had a workflow and library working with no issues, but had to move the library and export the workflow to another subsite (though on the same web site/collection). I followed these how-tos:
http://msdn.microsoft.com/en-us/library/office/jj819316%28v=office.15%29.aspx
http://technet.microsoft.com/en-us/library/ee428301%28v=office.15%29.aspx
Anyway, I've stripped all actions from the workflow and only have an Assign Task, but get this below:
An unhandled exception occurred during the execution of the workflow instance. Exception details: System.ArgumentException: ContentTypeId at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance
instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
To troubleshoot, I removed all library columns, removed then re-added the Custom Content type the New Document uses, and still the same error - with the workflow going into Suspended mode.
I also tried the removal of the file from /Relationships%20List/allitems.aspx and de-activating then re-activating the SharePoint Publishing feature, also that didn't work.
I've gone into ULS, but unable to find anything definitive, so not sure what to try next?
Thank you,
Chad

Hi Chad,
Glad to hear the issue is resolved. Content types could be used for multiple lists in SharePoint site at the same time.
However, I'm not quite sure why you said the resolution is for a "bug". I read the article per your link:
http://www.andrewconnell.com/blog/SP2013-Workflow-Custom-Task-Outcomes
The article is showing how to create custom outcomes buttons in task forms. As I understand, the issue you encountered is that workflow migrated from the other site shows the suspended status.
Please be more specific on the issue if assistance is needed. If this is the second question, I’d recommend you open another thread in the relevant forum and provide specific information about the issue. In order to avoid confusion and keep track of troubleshooting
steps, we usually troubleshoot one issue per thread in order to find a resolution efficiently.
Thanks for the understanding.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

OIM - Task Assignment Adapter - How to get the object instance key?

Hello experts,
I'm trying to use a task assignment adapter to assign an approval task dynamically. Basically, the user can request a resource like "CustomApp Profiles" and we create an object form to let them choose the profile that he needs. Each profile has an owner, which is populate in a Lookup (Owner is the code and Profile is the decode).
So, in the approval task, I need to get the profile selected by user in the object form and search into the lookup who is the owner of that profile. But I don't know how can I get the object instance key using the parameters that can be mapped to a task assignment adapter.
Looking into the OIM documents, I believe that the easier way is using the request key, because the REQ_KEY is a foreign key in OBI table.
Did anyone knows how can I get the object instance key using the request key? Can I use some API or should I execute a SQL statement directly in OIM database?
Best Regards,
Nitto

To retry a task that is in a rejected state, you use the SCH_KEY which is the task key. In OIM, all rejected tasks are listed in the OTI table. It contains all the important information about a rejected or pending task.
You can use the APIs found in the tcProvisioningOperationsIntf class to retrieve open tasks.
-Kevin

Problem about get the workflow context

There are 2 servers.
One is Weblogic server (server1), deployed a fusion web project on it.
Another is BPM server (server2), deployed the bpm process on it.
On the fusion web project, we use API to get the tasks. But we encountered a problem about get the workflow context.
There are 2 method to get the workflow context.
1. getTaskQueryService().authenticate(userId, password, null, null), this method need to pass in useId and password, we can get the user form request but can't get
password.
2. getTaskQueryService().createContext(request), we pass the request on server1, but can't get the context on server2, exception thrown.
Appreciate if you can give some help.

javax.el.ELException: java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[jcooper, ERole]
     at javax.el.BeanELResolver.getValue(BeanELResolver.java:266)
     at com.sun.faces.el.DemuxCompositeELResolver._getValue(DemuxCompositeELResolver.java:173)
     at com.sun.faces.el.DemuxCompositeELResolver.getValue(DemuxCompositeELResolver.java:200)
     at com.sun.el.parser.AstValue.getValue(Unknown Source)
     at com.sun.el.ValueExpressionImpl.getValue(Unknown Source)
     Truncated. see log file for complete stacktrace
Exception thrown when createContext()

Get the Process Instance as a process variable

Hi,
is there a way on a Workflow Process to get the process instance in order to save it as a process variable (and then store it via a backend call).
In other words: I have many processes designed via NWDS Process Composer and I'd like to get the process instance ID in order to save it for faster retrieval of the process in the NWA's Manage Process application.
Thank you,
Pietro.

Does it work if the process instance is already created?
Can you give me an example?
I've put as the first step of every workflow a callback method that is executed that calls an RFC to confirm, backend-side, that the process has been created.

How to get the assigned sequnce number?

Hello,
In the code below, I'm trying to get the assigned sequence number but it's returning null, how do i get the sequence number cause I need this as a parameter to another method???
( (UnitOfWork) handle).assignSequenceNumber(obj);
paymentId = obj.getPaymentId();
Thanks a lot...

I'll spare you a long diatribe about why you shouldn't possibly need the sequence number in your application code, and that such database specific knowledge can be isolated to make maintenance of the app easier moving forward. I'll assume you have a really good exscuse... :)
You are using the correct API, so there must be something else wrong. Has obj been registered in the unit of work before you try to assign the sequence numbers? And have you setup sequencing in the Mapping Workbench for this project? (Sequencing needs to be setup both at the project level (native or sequence table setup) and at the descriptor level (sequence name, column use, etc).
- Don

How to get the activity instance id and process id

Dear All,
For my case, my boss require the workflow program processor can be runtime assigned . After research, I found the coding example like below:
// dynamically assign a user to a role
rtm.addRuntimeDefinedUserToRole(
                  // process instance
                  prInstance,
                  // role name
                  "Processor",
                  // user that is assigned (IUser)
                  user,
                  // user context (IGPUserContext)
                  userContext);
// dynamically change the user assigned to a role for a particular task
String prInstanceID = prInstance.getID();
rtm.changeTaskProcessor(
                  // process instance ID
                  prInstanceID,
                  // activity instance ID
                  activityInstanceID,
                  // current user (IGPUserContext)
                  currentProcessorContext,
                  // new user (IGPUserContext)
                  newProcessorContext);
But I don't know how to get the process instance ID and activity instance ID before I can apply this api in my webdynpro application.
Any gentllement can give me an idea.
Thank you.
Regards
Eric

process = GPProcessFactory.getDesigntimeManager().getActiveTemplate(
                              // by specifying its ID "CCD2C3F1BED111DD9DFA005056A9416C",/
                                             /* and the user accessing it */ userContext);
     //          retrieve the Runtime Manager
     IGPRuntimeManager rtm = GPProcessFactory.getRuntimeManager();
     // create an empty role assignment list
     IGPProcessRoleInstanceList roles = rtm.createProcessRoleInstanceList();
     //Initialising the input params
     IGPStructure params =GPStructureFactory.getStructure(process.getInputParameters());
     params.setAttributeValue("Name",value);
     //Starting the process
     IGPProcessInstance prInstance = rtm.startProcess(process,"Process Name","Process name",user,roles,params,user);

My iPad was stolen in brazil. i cannot get the manufacturer id number from my iPhone or my macbook air....they are all linked together though. any suggestions on how and if i can possibly retrieve this and thus locate the device? thanks julie

my iPad was stolen in brazil. i cannot get the manufacturer id number from my iPhone or my macbook air....they are all linked together though. any suggestions on how and if i can possibly retrieve this and thus locate the device? thanks julie

Launch iTunes, go to the Preferences, select Devices, and hover your cursor over the backup file for the iPod. That should show you the serial number, IMEI, and possibly the MEID.
The manufacturer ID will not help you locate the iPad, though. If you set up the Find My iPad service in the Settings prior to the iPad going missing, then there is a chance that can be tracked, though it depends on a number of factors (the iPad is turned on, connected to a WiFi or 3G network, and has not had the Find My iPad service disabled or the iPad been completely restored).
If you did not set up Find My iPad, then there is no way to track it. Contact the police and change any passwords for any online accounts you may have used from your iPad (the iTunes Store, for instance).
Regards.

Get latest workflow instance programatically?

hi,
i am building sate machine workflow and when i upgrade the solution another workflow instance is created when workflow starts again.
now i want to get latest workflow instance problematically.
thanks,
gaurav.

Hi Jassik112,
You can use the following code get the latest work flow instance. Use bubble sort method.
public SPWorkflow GetTheLatestWorkflowInstance(SPListItem myitem)
SPWorkflowCollection ss = myitem.Workflows;
SPWorkflow[] sort = new SPWorkflow[ss.Count];
int k = 0;
foreach (SPWorkflow ghy in ss)
sort[k] = ghy;
k++;
SPWorkflow temp = null;
int i, j;
for (i = 0; i < sort.Length; i++)
for (j = i + 1; j < sort.Length; j++)
if (sort[i].Created < sort[j].Created)
temp = sort[i];
sort[i] = sort[j];
sort[j] = temp;
return sort[0];
Thanks,
Jack
Jack Gao
TechNet Community Support

Need to query the database to get the last sequence number

Hi all
I am trying to get the last sequence number of the last row inserted into my Oracle database. Please could someone give me the SQL which would allow me to do this - using Oracle SQL Explorer I have confirmed that there is a sequence on the table which is called: XYZ_SEQ and the code for this is:
CREATE SEQUENCE "MY_USER_NAME"."XYZ_SEQ" MINVALUE 1 MAXVALUE 999999999999999999999999999 INCREMENT BY 1 START WITH 21 CACHE 20 NOORDER NOCYCLE ;
My Java application is inserting a row into my table and to insert a new row I need to have the last sequence inserted +1 so the new row can be added.
Any help would be much appreciated.

Hi,
Welcome to the forum!
If you are using a sequence just do (example):
INSERT INTO TABLE_NAME
   (COL1,
    COL2)
VALUES
   (SEQUENCE_NAME.NEXTVAL,
    OTHER_VALUE);to obtain (and use) the next number in the sequence when you are inserting.
If you have a sequence to use for a specific table, you should use it when your insert new data (no matter your are doing that: java application, procedure, etc). Doing this you avoid some problems when you have the sequence 'out of date' about the associated data.
Regards,
Edited by: Walter Fernández on Sep 19, 2009 10:08 AM
Edited by: Walter Fernández on Sep 19, 2009 10:10 AM

How do I go about getting the product serial number to register my product as well as install my product. I bought it with a product box. On the software disc sleeve, there is a series of numbers pasted at the bottom of the sleeves but this is not valid

How do I go about getting the product serial number to register my product as well as install my product. I bought it with a product box. On the software disc sleeve, there is a series of numbers pasted at the bottom of the sleeves but this is not valid. When I tried to type this in for registration, it does register as this numbers also contain letters in it. Apparently the registration boxes accept numbers only. What do I do with a useless product for which I have paid good money for it?????

This is the simple solution which was offered to me when I tried to get the serial code on line.
The box and disc sleeve do not contain a series with 24 numbers which I presume is the product code to install.
I tried to redeem the registration code by following what they recommended, but inevitably it gets to the page that showed the registration boxes that need 24 serial numbers and I got stuck again.
This product is so different what my previous experiences of other software products where I just enter the serial number straight from the disc sleeve and then I got registered and go on to use the software.
I is really frustrating, spending the last two hours trying to get my product going....

How to get the current month number

Hi everyone,
Does anybody know how to get the current month number in Oracle Discoverer Worksheet calculation?
I try to use EUL_DATE_TRUNC(CURRENT_DATE, 'MM'), but instead I got 01-AUG-00.
If I change the data display format to MM, it will give me "08" but if I use TO_NUMBER function to convert it to number I get error "invalid number"
Is there anyway to get the current month value in number? Thanks

Scott,
Thank you so much! It works perfectly! :)
Hope you have a great day ahead!
Cheers,
Angeline

Use SQL function to get the original order number using the invoice number

Hi All,
wondering is someone can help me with this challenge I am having? Often I need to return the original order numbers that created the resulting invoce. This is a relatively simple seriese of joins in a query but I am wanting to simplify it using a SQL function that can be referenced each time easily from with in the SELECT statement. the code i currently have is:
Use SQL function to get the original order number using the invoice number
CREATE FUNCTION dbo.fnOrdersThatMakeInvoice(@InvNum int)
RETURNS nvarchar(200)
AS
BEGIN
DECLARE @OrderList nvarchar(200)
SET @OrderList = ''
SELECT @OrderList = @OrderList + (cast(T6.DocNum AS nvarchar(10)) + ' ')
FROM OINV AS T1 INNER JOIN
      INV1 AS T2 ON T1.DocEntry = T2.DocEntry INNER JOIN
      DLN1 AS T4 ON T2.BaseEntry = T4.DocEntry AND T2.BaseLine = T4.LineNum INNER JOIN
      RDR1 AS T5 ON T4.BaseEntry = T5.DocEntry AND T4.BaseLine = T5.LineNum INNER JOIN
      ORDR AS T6 ON T5.DocEntry = T6.DocEntry
WHERE T1.DocNum = @InvNum
RETURN @OrderList
END
it is run by the following query:
Select T1.DocNum, dbo.fnOrdersThatMakeInvoice(T1.DocNum)
From OINV T1
Where T1.DocNum = 'your invoice number here'
The issue is that this returns the order number for all of the lines in the invoice. Only want to see the summary of the order numbers. ie if 3 orders were used to make a 20 line inovice I only want to see the 3 order numbers retuned in the field.
If this was a simple reporting SELECT query I would use SELECT DISTINCT. But I can't do that.
Any ideas?
Thanks,
Mike

Thanks Gordon,
I am trying to get away from the massive table access list everytime I write a query where I need to access the original order number of the invoice. However, I have managed to solve my own problem with a GROUP BY statement!
Others may be interested so, the code is this:
CREATE FUNCTION dbo.fnOrdersThatMakeInvoice(@InvNum int)
RETURNS nvarchar(200)
AS
BEGIN
DECLARE @OrderList nvarchar(200)
SET @OrderList = ''
SELECT @OrderList = @OrderList + (cast(T6.DocNum AS nvarchar(10)) + ' ')
FROM OINV AS T1 INNER JOIN
      INV1 AS T2 ON T1.DocEntry = T2.DocEntry INNER JOIN
      DLN1 AS T4 ON T2.BaseEntry = T4.DocEntry AND T2.BaseLine = T4.LineNum INNER JOIN
      RDR1 AS T5 ON T4.BaseEntry = T5.DocEntry AND T4.BaseLine = T5.LineNum INNER JOIN
      ORDR AS T6 ON T5.DocEntry = T6.DocEntry
WHERE T1.DocNum = @InvNum
GROUP BY T6.DocNum
RETURN @OrderList
END
and to call it use this:
Select T1.DocNum, dbo.fnOrdersThatMakeInvoice(T1.DocNum)
From OINV T1
Where T1.DocNum = 'your invoice number'

How to get the unoccupied material number in a number range

How to get the unoccupied material number in a number range.for example, I wang to get a number between 1500000 and 1599990 which is unoccupied as my material number to be created. Is ther any FM or codes?

Dear,
You can get this information from Tcode SNUM or you can access database table NRIV.

BPM an Mapping: Get the workflow instance number?

Similar Messages

Maybe you are looking for