BPM and Proxy

Hi all,
first all, believe me than I have searched a lot in the SDN about it, but i Can't find answer to my question
I'm trying to do a simple asynchronous BPM scenario.... SOAP ->BPM -> PROXY
in mi Integration Process I have defined many "variables" in the container, but all of them referencing to Abstracts message interfaces....
when, I go to SPROXY transaction, I can't see the message interface for activate it and then write some ABAP code in it.
If I use a regular interface mapping... with inbound or outbound async message interfaces I can see it on SPROXY, but it doesn't works in the BPM....
I'm new on BPM world..
Please Guide me!
Thanks in advance.
Regards

you need to create Outbound and inbound interface.
After that for those interfaces you need to create related Abstract interfaces.
So first interface will be OA_ABC then for that AA_ABC and IA_DEF and AA_DEF.
Then you will be able to see the inbound interface in your SPROXY transaction for coding.
Thanks,
Hetal

Similar Messages

  • BPM ?  proxy server?

    Hello,
          Can some one help me why BPM and proxy servers are needed in integration process with a example why these needs to be used.

    Hi
       These are two diffenent Tools in SAP XI where Proxy we will write ABAP CODE and Java Code. where BPM is called cross-component BPM.
    http://help.sap.com/saphelp_nw04/helpdata/en/02/265c3cf311070ae10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/68/6bfd3f9149ca42e10000000a1550b0/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/68/6bfd3f9149ca42e10000000a1550b0/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/0f/80243b4a66ae0ce10000000a11402f/frameset.htm
    Hope these inform will help you.
    Regd's
    Hari

  • BPM and ESB

    Please tell the difference between BPM and ESB.

    Basically, and very briefly
    ESB is used to proxy disparate services running on the backed in a unifed way.
    BPM is used to orchestrate business processes using services exposed by an ESB. A process can be exposed as a service too.
    Normally BPM sits on top of an ESB to provide the process layer into the global architecture.
    Hope it helps clarifying.
    MAriano Benitez
    Join us at BEAParticipate, May 6-9 2007 | Atlanta, Georgia

  • Collect Operation using BPM and

    Hi Experts,
    I have a scenario where Proxy to file communication happens.
    1.i have to collect all the data in XI that has sent from proxy ( Sender System ) via BPM and send to file system only after every 15 mins.
    2. For the same scenarion without using BPM.
    i have to append ( in the file construction Mode ) the data in the file for 15 mins only.ould you
    Kindly help me with these two questions with step by step procedure. Thanks in advance.
    Regards,
    Ruban.S

    Hi,
    In ESR you could go to SAP BASIS -> SAP BASIS 7.xx -> Integration Processes -> BpmPatternCollectTime. It contains the pattern/steps that you would need.
    Not sure if there is a good way of doing this without bpm.
    Regards,
    Mark

  • Need to use BPM for proxy tp file

    Hi All,
    i am using proxy to file . in this i taking the hole data from sap tables and sending to file.
    i am sending from R3 side is near abt more than 100KB so it is not reaching to pi it failing it self in R3 side.
    for this can we use pi andfor this can i spilt the source message into 50KB ,50 KB and then collect into BPM and send it to in one file.
    Regards
    Edited by: gangadhar kh on Dec 7, 2009 12:10 PM

    Hi Gangadhar,
    Performance wise we don't suppose to send that large amount of files at a time through XI, what we can do is we have to split those large messages into smaller messages and send to PI and sap recommended this.
    Check this links
    /people/alessandro.guarneri/blog/2007/02/21/sap-xi-acting-as-a-huge-file-mover
    http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417300)ID0036274150DB10726721545819601349End?blog=/pub/wlg/14425  (check second option here)
    /people/udo.paltzer/blog/2008/11/03/real-life-customer-examples-for-high-volume-scenarios-with-sap-netweaver-process-integration
    http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417300)ID0036274150DB10726721545819601349End?blog=/pub/wlg/5899  - (Zipping the file after receive unzip the file)
    Regards
    Ramesh

  • Regarding Future WLI Products, BPM and diiference with Aqualogic

    Regarding Integration and BPM products from BEA I have the following queries:
    1) What is the next major release for Weblogic Integration product and what Enhancements will be there?
    2) Which BEA product is going to have Business Process Management (BPM) functionality supporting BPEL Server and BPEL designers?
    3) How BEA differentiates the BEA AquaLogic from BEA Weblogic Integration?
    regards,
    neeraj
    ?:|

    I found some more information here:
    Workflow in SAP NetWeaver
    I still look forward to more insight as to when to choose BPM and workflow!

  • Is there a way to force which wifi network and proxy clients connect to from WGM?

    is there a way to force which wifi network and proxy clients connect to from WGM?

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
     Cheers, Tom

  • Is there a way to see on itunes to all my songs the bpm and the key to every song?

    I have some external programs such as BPM Analyser or Mixmeister that i can scan all my songs and have the bpm and the key to every song!Is there a Plug-in or something else that i can have that as a "category" on Itunes so dont need to open another program to do that?It will be useful to the same list to have all and don't need to use external program.If someone know something about that please help.

    There's a field and column for BPM in iTunes - control-click on any of the column headers to see the full list, from where you can select the BPM column to appear. This if course presumes that the utility you're using will write the BPM information into that field; most will. There's no specific field for the key signature, so the utility would have to write that information into another field such as the Comments.
    Regards.

  • Asynchronous, but need Ack without using BPM and IDocs.

    Hi Experts,
                     I would like to do a scenario i.e., "Asynchronous communication, but need Acknowledgement without using BPM and also without using IDocs whether it is sender side or receiver side". Please help me.
    Thanks in advance
    Srihari.

    Without using BPM will be little longer process. But the alternative way is to add one more receiver in the receiver determination and send some file to that location with the actual mapping getting executed for the actual receiver. and in the second interface you can get the file created at second receiver back to the source location. But this will be little long as compared to synchronous scenarios.
    Flow:
    Source
              Receiver 1--> Actual mapping as per requirement
              Receiver 2(For Ack)--> Create a mapping with blank file sent to Receiver
    Receiver 2-->File Adapter--> Source through 2nd mapping/interface and keep the File adapter pooling interval around 5 sec or less so that you can get the file back to source location.
    Regards
    Anand

  • BPM and ADF integration - some questions

    Hi,
    I have a few questions about comunication between BPM 11.1.1.5 and Human Task based Task Flow:
    1) What is the best way to pass data (task id, proces id, proces data) from BPM workspace to Human Task Task Flow (and get them as TF params).
    2) Where can I find a description, how ADF app comunicates with BPM process.
    3) Where can I find a description of all data controls created by JDeveloper (BPM Suite) when HT Task Flow is created.
    3) Where can I find a description (and their functionality) of managed beans created by JDeveloper (BPM Suite) when HT Task Flow is created.
    Kuba

    Hi,
    Sory, but I'm still not sure, how ADF comunicates with BPM (I know that it uses EJB services and hwtaskflow.xml). But a still don't have an answers for follwowing questions:
    1) I know ADF quite good. Having method in data controls (in our case getTaskDetails()) we need to invoke it somehow. I don't see anywher invokation of this method.
    2) In generated task flow there is some managed beans and params - what is role of them ? Having over 50 task flows , do I need it in all of them. Where can I find description of those beans and params
    3) In our approach we use BPM , ADF RC for UI and Business Components to persist data into database. Only data from payload we need is ID of master-level row. My question is - do I have to generate data controls for all human task ?. In my my opinion it should be only one communication point between BPM and ADF but not the same for all pair human task --> task flow.
    All infomation I need from BPM is:
    - task ID
    - task flow name (to open apriopriate tab in my application)
    - available outcomes
    - to know is BPM operation is enabled
    Kuba

  • BPM and SOA will Support Windows Server 2003 R2 x64

    Hello All -
    Can you please tell me, BPM and SOA Suite (10g and 11g) can support the following Server?
    Windows Server 2003 R2 Standard x64 Edition Service Pack2.
    Thanks in advance.

    Here's where you can find the compatibility matrix for Oracle BPM 10g with platforms, operating systems, JVMs and databases: http://www.oracle.com/technetwork/middleware/bpm/obpm-config-matrix-085247.html#bpms1032
    Getting the same compatibility information for Oracle BPM 11g proves a bit more difficult. The closest I've come to finding a similar list is when I went to http://download.oracle.com/docs/html/E18558_01/fusion_requirements.htm. Sure others will have fond an easier route to the information for 11g.
    Dan

  • BPM and Webservices

    I'm new in using of BPM and Webservices
    Netweaver version  is  CE 7.2 SPS03
    I use Web dynpro to write a ap to trigger web service for start BPM process.  
    It took about 40 sec for waiting response when i trigger the synchronous web service.
    And i get a exception  "DEFAULT_WS_METADATA_DEST. The server response timed out"
    But  i check my process status, it is running ok.
    When I tested for asynchronous web service ,I get quick response for it
    Does this version only support asynchronous web service?
    Do I need another configuration to use synchronous web service?

    Hi
    For process start you need a asynchronus web service (no output / response).
    Also, you can use a synchronus one if you are aware of this: If you use a synchron web service, you have to model a parallel split at the beginning of the process and finishing one of both tokens directly. This way, a response is generated when the first token hits the end event and the rest of the process is handled asynchronus.

  • BPM and webdynpro for ABAP

    Dear All,
    I am new to BPM and wanted to understand that is there any linking in Web dynpro for abap and BPM or WD for JAVA can only be used in BPM. Also can somebody help me with the stztart document which tells about transaction and SAP netweaver step by step process for creating SAP BPM application. The BPM workflow, how it is connected to SAP at backend.
    Thanks in Advance!
    Regards
    Naveen

    Hi Naveen,
    Netweaver BPM is shipped as part of Netweaver Composition Environment starting version 7.1 EHP1 and now CE 7.2 is also out. It wont be possible to run on ABAP stack. Also if you want to start learning then you may start with the following links:
    /people/arafat.farooqui/blog/2009/08/05/part-i-an-introduction-to-sap-netweaver-bpm
    http://www.sdn.sap.com/irj/sdn/bpmc
    Hope this helps!!
    Cheers,
    Arafat

  • BPM and ccBPM

    Hi,
    What is the difference between BPM and ccBPM?
    any idea!
    tks.
    VG

    HI,
    <i>.difference between exchangefaultData and
    exchangeLogdata?</i>
    >>>These are used in the FaultMessage types. These are automaticaly created when you create a namespace.
    for more~
    http://help.sap.com/saphelp_nw2004s/helpdata/en/dd/b7623c6369f454e10000000a114084/content.htm
    <i>II. What i need and necessity to create Message Tye from Data Type?</i>
    >>>None.. Once you create a Data type, then you can directly create a message type.
    Data Type is a unit of message whereas message type is wrapper for your data type. I.e Message type comprises the data types. SO message type is a root of xml message strcuture
    For more-
    http://help.sap.com/saphelp_nw2004s/helpdata/en/2d/c0633c3a892251e10000000a114084/content.htm
    Regards,
    Moorthy

  • BPM and Alert

    I have a BPM and I want to bring in ALERT mechanism when my BPM Fails, how to configure the alert in BPM?
    Thanks.

    Hi,
    Another blog by Michal once again,
    /people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
    Regards,
    Bhavesh
    PS:  Would appreciate if you can try a search on SDN before posting a thread. All info is available here in terms of its blogs , library etc. For instance i just did a search on Alerts ( blogs) and I came across this blog.

Maybe you are looking for