BPM Cache Error

Hi All:
I am getting strange error in SXI_Cache. The moment I import the IP (BPM) in ID and activate it, ABAP cache becomes RED and says " Cache Contents is obsolete". Can any one let me know why XI is behaving like this?
If I delete the imported IP from ID, then cache becomes green.
I check SWF_XI_CUSTOMIZING and found this error:
(X: Red Color) Maintain Definition Environment --->(X: Red Color) Check Entries from HR Control Tables
Regards,
Farooq

Hi Farooq,
It is suggested that all components in SWF... should be green,
Have a look at OSS note:
Note 1030255 - Integ. server ABAP cache not automatically updated
Sachin

Similar Messages

  • BPM: Permanent error in BPE inbound processing

    Hi guys...
    i am having a problem in my scenario which is involving BPM.
    The problem is when i execute the interface it is showing green flag aginst PE in sxmb_moni and in smq2 one queue is showing with sysfail and BPM: Permanent error in BPE inbound processing  error.
    yes..i searched on SDN and found resources like Note number 1126656
    i checked al the steps which were earlier mentioned posts like:
    SWWL:  there are no entries existing
    SMQ2: cleared the queues ,regenerated but still no luck.
    My undertsanding is no work is being generated at all .
    I checked BPM with F7 : its correct no errors
    BPM has return code of 0 in sxi_cache
    In ID BPM is latest and refreshed.
    Is there any way i can overcome this problem.
    Your inputs will be of real help.
    Thanks in advance.
    Regards,
    Kiran.

    My undertsanding is no work is being generated at all .
    If you are getting the error for Source ---> BPM  flow then there is a possibility that the ID objects (RD, Interface determination) are to be blamed.
    1) Recreate these particular ID objects/ make some dummy changes
    2) Activate and ensure that Cache is refreshed
    3) Delete the entry in the queue (or delete the queue)....do this only if the XI system is not of Quality, production
    4) some times the BPM cannot be triggered from sending a test message from RWB .... so make a testing from the source application .... this particular case has heppened to me and hence suggesting to you.
    Regards,
    Abhishek.

  • Install cache error

    I'm trying to install itunes 10.6 on windows 7 home premium.  it downloads the software and starts to install.  I receive an error:  "an error occurred while attempting to create the directory c:/program data/apple/installer cache" I click retry several times and no luck so I have to click cancel and it rollsback the installation. I have downloaded a new copy of the installer from another computer and receive the same error.  I dropped the UAC on the system to none.  That did not work, it give me the same error.  I have tried renaming the Installer Cache to a temp name and when installing again, I the error says it doesn't have the permissions to create the directory.  I have gone into the control panel and attempted to repair bonjour, itunes, apple mobile device support, apple software update and quicktime and all of them have reported "The system cannot find the file specified."  I have tried running the install package with the right click Run as Administrator and the install cache error still occurs.  I have check the security on the file and it has my user name and full control on the parent and all items below.
    When I plug in my iphone or ipod, it asks about updating to 5.1, I click download only. I then receive an error window "There was a problem downloading the software for the iphone or ipod.  The network connection could not be established"
    I don't know if the two problems are related.  I'm at a stand still have have no other ideas of what to try next.  What suggestions might you have to solve this problem?
    Thanks for the help!
    Joel

    I tried to rename the apple computer folder to _old and I received another error with another really funky folder name that looked like a SID.  I renamed that and reran.
    Crikey. Probably that number (in the folder name) was the SQUID ("squished GUID") for the iTunes installation (or possibly one of the other associated components being installed). In addition to the error 5, that brings us to a total of three of the more exotic things that could possibly happen in this sort of file-access-problem context.
    So, excellent work on your part getting past all that. Many thanks for reporting back with your resolution, too.

  • Cache error message in Adobe Bridge CS6

    I am continuing to get a cache error message despite purging the cache several time on different occassion via the Preferences. Adobe Bridge now seems to be frozen on Building Criteria. The platform I am using iMac OSX 10.8.5. I have rebooted the machine a couple of times to no avail. Any advice

    If Windows, search your event viewer for something like "The device \Device\Ide\iaStore0 did not respond within the timeout period." Since this
    is kind of a hardware issue, there might be a similar thing happening on MACs. If you see this warning check what driver you are using for Intel
    Rapid Storage Technology. I was using version 10.x and the latest from Intel is 12.x. Intel cautions you not to use this updated driver without
    checking with the system manufacturer, which in my case, Asus, maintained that 10.x was the latest approved driver. I installed the 12.x driver
    directly from Intel despite the warning, and the problem seems to have been resolved. I post in case this gives someone else a clue to solve
    this nagging problem.
    Oh, this might be particularly significant if you have recently installed a larger hard disk.

  • Win 8.1 Lock Up After 5 min, "Memory Management" or "Cache Error"

    Systems blue screens every few minutes. MS offered a variety of error messages, now is uniformly "Memory Mangement". Chrome shows a Cache Error.
    Any ideas?

    Hello again TexasBooster,
    It is good to hear from you again!
    To contact our technical support, please call at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    I hope this helps!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • URGENT Bridge and cache error photo corrupted NEED HELP

    We were going to edit a photo and upon opening it and error came up and said: "edit bridge encountered a problem and is unable to read the cache. please try purging the central cache in cache peferences to correct situation"
    We solved the cache problem by purging it but the photo is corrupted! Furthermore, the photo turned red and 1/3 of the photo has been mysteriously turned black!  It only briefly returns to normal after cache problem in adobe bridge. It turns normal but only for a split second!!! WE NEED THIS PHOTO RESTORED TO ORIGINAL CONDITION BEFORE THE CACHE ERROR.
    Thank you for help

    Your photo may be lost, I'm sorry to say.
    Check your Windows System Event log and look for disk errors.  Disks do fail, and if there have been unrecoverable errors you'll see them in the event log.
    A failing disk is not something to be left alone.  I hope you have a recent backup - if not, make one right away, then replace any failing disk drive ASAP, or you chance losing more data.  I always recommend high-reliability enterprise class disk drives such as Western Digital RE4.  They're not that much more expensive, and lost data can be worth a lot.
    -Noel

  • BPM for error handling and acknowledgements

    Hi,
    Can any one tell me how to handle BPM for error handling and acknowledgements in one scenario.
    Please send me the link if you have other wise give me the solution on the same.
    Thanks,
    Nagesh

    Hi !
    Just check out these links This might help you.
    Usually Application Level Acknowledgement is considered during Sync communication. If you are using RFC, you can make use of Sync communication. So you can handle it without bpm, provided your both sender and receiver are sync interfaces.
    To know about Ack-
    http://help.sap.com/saphelp_nw2004s/helpdata/en/f4/8620c6b58c422c960c53f3ed71b432/content.htm
    you can not dirrectly access the content of the ACK, however the BPM shows different behaviours based on the ACK status. E.g. if the ACK contains a success message the BPM will continue in its normal process, if the ACK contains a permanent error, it will either stop or go through an exception branch (provided such a branch has been defined). Have a look at the documentation: http://help.sap.com/saphelp_nw04/helpdata/en/43/65ce41ae343e2be10000000a1553f6/content.htm It doesnt"t state the above mentioned behaviour in detail but says that you need to define an exception branch.
    The trickiest part is always to find out, when you will get a transient vs. as permanent error ack. If you are using ACKs with Proxies refer also to this link http://help.sap.com/saphelp_nw04/helpdata/en/29/345d3b7c32a527e10000000a114084/content.htm and this http://help.sap.com/saphelp_nw04/helpdata/en/f4/8620c6b58c422c960c53f3ed71b432/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/29/345d3b7c32a527e10000000a114084/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/7b/94553b4d53273de10000000a114084/content.htm
    <b>The following link has entire configuration of Receiver XI Adapter (including acknowledgements)</b>
    http://help.sap.com/saphelp_nw04/helpdata/en/f4/0a1640a991c742e10000000a1550b0/content.htm
           <b>   eror handling in BPM.  
    </b>
    1. CCMS monitoring
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/42fb24ff-0a01-0010-d48d-ed27a70205a8
    2. BPM Monitoring
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e7bc3a5a-0501-0010-1095-eb47159e169c
    3. Monitoring XML Messages http://help.sap.com/saphelp_nw04/helpdata/en/41/b715045ffc11d5b3ea0050da403d6a/frameset.htm
    /people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
    monitoring BPm https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e7bc3a5a-0501-0010-1095-eb47159e169c
    Reconciliation of Messages in BPM - /people/krishna.moorthyp/blog/2006/04/08/reconciliation-of-messages-in-bpm
    Also see the below BPM related links
    check list for BPM https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3bf550d4-0201-0010-b2ae-8569d193124e
    /people/shabarish.vijayakumar/blog/2005/08/03/xpath-to-show-the-path-multiple-receivers
    http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/62/dcef46dae42142911c8f14ca7a7c39/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/de/766840bf0cbf49e10000000a1550b0/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/cb/15163ff8519a06e10000000a114084/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/content.htm
    Many other examples can be found under the following link at help.sap.com
    http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
    And some weblogs
    https://weblogs.sdn.sap.com/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken]
    /people/siva.maranani/blog/2005/05/22/schedule-your-bpm *****
    /people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
    /people/michal.krawczyk2/blog/2005/06/11/xi-how-to-retrieve-messageid-from-a-bpm
    /people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
    /people/sravya.talanki2/blog/2005/08/24/do-you-like-to-understand-147correlation148-in-xi
    /people/michal.krawczyk2/blog/2005/09/04/xi-do-you-realy-enjoy-clicking-and-waiting-while-tracing-bpm-steps *****
    /people/udo.martens/blog/2005/09/30/one-logical-system-name-for-serveral-bpm-acknowledgements *****
    /people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
    /people/kannan.kailas/blog/2005/12/07/posting-multiple-idocs-with-acknowledgement
    Also have a look at these seminars,
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/daea5871-0701-0010-12aa-c3a0c6d54e02
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/e8515171-0701-0010-be98-e37bec4706cc
    Thanks !!!
    Regards
    Abhishek Agrahari
    Questions are welcome here!!
    <b>Also mark helpful answers by rewarding points</b>

  • IDoc to Soap, with BPM - Permanent error in BPE inbound processing

    Hi Experts,
    IDoc to Soap, with BPM - > Permanent error in BPE inbound processing
    How to rectify this any issue???
    Thanks-
    sk

    Hi,
    The inbound processing encountered a permanent error and the queue therefore stopped.
    The error message "Permanent error in BPE inbound processing" may be caused by the following:
    - At the start or when you process a process instance, the inbound processing encounters an exception that was not handled. This exception is triggered, for example, by a transformation step, a synchronous send step or a control step but it was not caught in an exception handler branch. If the exception that was not handled occurs in the first transaction of the started process instance, the system does not write the process instance to the database but it sets the queue that has this error message to the error status.
    Refer to the help in Note 1082099
    - The inbound processing triggers this error if the correlation evaluation shows that a message should be delivered to a process instance that has the status "error". Since delivery to process instances that contain errors is not permitted, the queue is stopped.
    Use the simulation of the message delivery in the detail view of the relevant queue LUW to determine the relevant process instance for the affected message and use transaction SXMB_MONI_BPE "Continue Process Following Error" (or transaction SWF_XI_SWPR) to continue. If you cannot continue the process instance, check whether you can logically delete the instance. In this case, use the method that is described in Note 807906 to logically delete a process instance.
    Check whether your system contains other process instances that have errors in order to detect similar problems. Use transaction SXMB_MONI_BPE "Continue Process Following Error" or transaction SWF_XI_SWPR.
    Use the report RSWF_CRL_MAINTAIN to check all of the correlation instances in question or the relevant process instances that you can reach using "Display Work Item".
    - Messages that cannot be delivered because no correlation instance can be found may lead to the error that is mentioned here. Check whether the causes that are outlined in Note 1094028 affect your case.
    Hope this will help you.
    Regards
    Aashish Sinha
    PS : reward points if helpful.

  • Firefox 5 seems to cache error redirects.

    Firefox 5 seems to cache error redirects.If for example I get redirected to a 404 then fix the problem with the site, it will still redirect me to the 404.

    Try to Reload web page(s) and bypass the cache.
    * Press and hold Shift and left-click the Reload button.
    * Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    * Press "Cmd + Shift + R" (MAC)

  • Cat c6509 E with Supervisor vs-s720-10g reload and Cache error detected!

    Can you help me Cat c6509-E reload 
    connect console  I see :
    Initializing ATA monitor library...
    Self extracting the image... [OK]
    Self decompressing the image : ############################# [OK]
                  Restricted Rights Legend
    Use, duplication, or disclosure by the Government is
    subject to restrictions as set forth in subparagraph
    (c) of the Commercial Computer Software - Restricted
    Rights clause at FAR sec. 52.227-19 and subparagraph
    (c) (1) (ii) of the Rights in Technical Data and Computer
    Software clause at DFARS sec. 252.227-7013.
               cisco Systems, Inc.
               170 West Tasman Drive
               San Jose, California 95134-1706
    Cisco IOS Software, s72033_sp Software (s72033_sp-IPBASEK9-M), Version 12.2(33)SXI1, RELEASE SOFTWARE (fc3)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2009 by Cisco Systems, Inc.
    Compiled Sat 28-Mar-09 10:48 by prod_rel_team
    Image text-base: 0x40101328, data-base: 0x421FFA10
    Cache error detected!
      CPO_ECC     (reg 26/0): 0x000000B6
      CPO_CACHERI (reg 27/0): 0x84000000
      CP0_CAUSE   (reg 13/0): 0x00004800
    Real cache error detected.  System will be halted.
    Error: Primary data cache, fields: , 1st dword
    Actual physical addr 0x00000000,
    virtual address is imprecise.
     Imprecise Data Parity Error
     Imprecise Data Parity Error
     22:12:30 UTC Tue Mar 24 2015: Interrupt exception, CPU signal 20, PC = 0x413EB310
       Possible software fault. Upon reccurence, please collect
       crashinfo, "show tech" and contact Cisco Technical Support.
    -Traceback= 414EDA90 
    $0 : 00000000, AT : 42510000, v0 : 00000000, v1 : 00000001
    a0 : 43757CC4, a1 : 00040110, a2 : 45762ECE, a3 : 00000000
    t0 : 44997CF0, t1 : 00000000, t2 : D5303A40, t3 : 00003A40
    t4 : 0000004F, t5 : 0000005F, t6 : 68C8F600, t7 : 00000000
    s0 : BEDA4010, s1 : 00000000, s2 : 00000000, s3 : 44086D60
    s4 : 45762ECC, s5 : 00000001, s6 : 00000080, s7 : 44080000
    t8 : 45762ECC, t9 : 00000000, k0 : 841E6970, k1 : 02951800
    gp : 4250FC60, sp : 44997D48, s8 : 4499848E, ra : 413EB310
    EPC  : 414EDA90, ErrorEPC : 413EB310, SREG     : 3400F105
    MDLO : 00159DC0, MDHI     : 00000000, BadVaddr : 00000000
    DATA_START : 0x421FFA10
    Cause 00004800 (Code 0x0): Interrupt exception
    File bootflash:crashinfo_20150324-221230 Device Error :No such device
    %Software-forced reload
     22:12:30 UTC Tue Mar 24 2015: Breakpoint exception, CPU signal 23, PC = 0x4171F5E0
       Possible software fault. Upon reccurence, please collect
       crashinfo, "show tech" and contact Cisco Technical Support.
    -Traceback= 4171F5E0 4171D184 40F4F26C 40F4F450 40F4F670 4171282C 
    $0 : 00000000, AT : 42510000, v0 : 441D0000, v1 : 424C0000
    a0 : 00000000, a1 : 00008100, a2 : 00000000, a3 : 00000000
    t0 : 0000FF00, t1 : 3401FF01, t2 : 41712918, t3 : FFFF00FF
    t4 : 41712918, t5 : 73206265, t6 : 65746563, t7 : 20546865
    s0 : 00000000, s1 : 424C0000, s2 : 00000000, s3 : 08000000
    s4 : 42380000, s5 : 42380000, s6 : 41D90000, s7 : 00000001
    t8 : 506D5CC4, t9 : 00000000, k0 : 00000000, k1 : 00000000
    gp : 4250FC60, sp : 50012420, s8 : 41D90000, ra : 4171D184
    EPC  : 4171F5E0, ErrorEPC : 413EB310, SREG     : 3401FF03
    MDLO : 00000000, MDHI     : 00000003, BadVaddr : 00000000
    DATA_START : 0x421FFA10
    Cause 00000024 (Code 0x9): Breakpoint exception
    === Flushing messages (22:12:30 UTC Tue Mar 24 2015) ===
    Buffered messages:
    Queued messages:
    *Mar 24 22:12:30.695: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.
    Firmware compiled 19-Feb-09 20:18 by weizhan Build [100]
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: Error address Lo=0x4010
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: Error address Hi=0x1EDA
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: Interrupt Hi reg=0x0
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: Interrupt lo reg=0x8000000
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-DUMP: System controller Global Registers Dump
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: global hazard reg=0x0
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: soft reset cfg reg=0x10FFFF
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: global cfg reg=0x20
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: init status reg=0x8
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: ibl cfg reg=0xE
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: prio map cfg reg=0x0
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: ecc error log reg=0x0
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: parity error log reg=0x0
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: jtag idcode reg=0x5013102F
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: work status reg hi=0x0
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: work status reg lo=0x0
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: eobc rxstat reg=0x11FE
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: eobc txstat reg=0x0
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: eobc mac cfg reg=0xE24
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: inbound rxstat reg=0x0
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: inbound txstat reg=0x0
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: io int stat reg=0x408
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: pcmcia cfg reg=0x1A0
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: pcmcia stat reg=0x3C
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: bist go stat reg=0x0
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: bist done stat reg=0x0
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: ibl debug reg 0=0x0
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: ibl debug reg 1=0x0
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: ibl debug reg 2=0x0
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: obl debug reg 0=0x0
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: obl debug reg 1=0x0
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: rxq debug reg=0x0
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: txq debug reg=0x0
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: gigmac cfg reg=0x1001
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: gigmac stat reg=0x0
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-FATAL: An unrecoverable error has been detected. The system is being reset.
    *Mar 24 22:12:30.695: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.
    *Mar 24 22:12:30.695: %SYS-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output.
    *Mar 24 22:12:30.695: %OIR-6-CONSOLE: Changing console ownership to switch processor
    *** System received a Cache Parity Exception ***
    signal= 0x14, code= 0x84000000, context= 0x441ce024
    PC = 0x4171295c, Cause = 0x820, Status Reg = 0x34018002
    System Bootstrap, Version 8.5(3)
    Copyright (c) 1994-2008 by cisco Systems, Inc.
    Cat6k-Sup720/SP processor with 1048576 Kbytes of main memory
    Autoboot: failed, BOOT string is empty
    Autoboot executing command: "boot "

    Hello Abubaker,
    It crashed due to a parity error.
     Imprecise Data Parity Error
     Imprecise Data Parity Error
    Which in other words means, a temporary error in memory. On single occurence adivice is to monitor the supervisor for re-occurence of such failure again. You can monitor it for 24 - 48 hours and if its a hard failure , the likelyhood of issue coming again is more and you need to replace supervisor. If it does not repeat you can consider this as a one time issue and contnue using it. 
    Hope this helps and please always rate useful posts.
    Thanks,
    Madhu

  • How do you troubleshoot Caching Errors in Java Runtime Environment?

    I have run into Caching Errors while using JRE (versions 1.4.2 and 1.5.0, various updates) using Windows XP and IE6. The error screen has the title Error - Cache and appears when trying to download JAR files through a secure HTTP connection. The error reads: "Caching Error. Unable to store or update files in the cache." In the details box, the first line can differ:
    java.net.SocketException: Connection reset
    java.net.UnknownHostException: [followed by a URL]
    java.net.ConnectException: Connection timed out: connect
    I looked in the Java Control Panel to make sure that the "Enable caching" box is checked, and removed the proxy settings in IE. The user has sufficient rights on the computer to download files.
    How does one go about troubleshooting these caching errors? Is there a reference document available? I could not find anything on the Sun site or anywhere else.
    Any help would be very much appreciated.

    I deleted c:\Documents and Settings\<user>\Application Data\Sun (the same as in Java Control Panel->Temporary Internet Files->Settings, but at higher level). After that and some machine reboots it worked.

  • Default Cache Error on a G4 Quicksilver

    So I've got a G4 quicksilver and it will not boot.
    I tried all the different ways to get it to boot. Holding "c" with a boot disk, checking the battery, unplugging ram one at a time, etc...
    The problem is, when I hold "option" to get into the disk boot option screen, is sees the drives (Operating System Drive & a Boot CD). I select either one, and a which screen pops up and says: "Default Cache Error, type "mac-boot" to boot the computers or type "shut-down" to shut down the computer.
    I've tried every combo and it does one of these things:
    Locks up on black screen
    White screen pops back up and crashes
    Starts loading (apple logo on screen) then the circle slash (ø) pops up like there
    Please help.

    Ok, So I got the OEM install disks with the Aplle Hardware tester. Here are some pictures of the issues I had durring this:
    Boot 1) In inserted the Hardware disk and got it to boot first time, here are those pictures:
    It looks like I had a issue with the Logic board or somthing that was plugged into it. as seen here: http://meistergaugefaces.com/mac/mac_6.JPG
    My hardware profile: http://meistergaugefaces.com/mac/mac_7. JPG
    It got all the way though the Logic board and mass storage scan, but half way through the RAM the crashes started back up. Here are a few more pictures of those misc errors:
    Booted off the hardware disk and got these 2 on the 2nd boot:
    http://meistergaugefaces.com/mac/mac_8.JPG
    http://meistergaugefaces.com/mac/mac_9.JPG
    Another Default catch error on the second attemp of the 3rd boot:
    http://meistergaugefaces.com/mac/mac_10.JPG
    This crash happened durring the 3rd boot:
    http://meistergaugefaces.com/mac/mac_11.JPG
    Message was edited by: MEISTERGAUGEFACES

  • Proactive caching Error while installing BPC 7.0 SP6

    All,
    We are installing BPC 7.0 sp 6 on Microsoft SQL Server 2008 (RTM) - 10.0.1600.22 (Intel X86)   Jul  9 2008 14:43:34   Copyright (c) 1988-2008 Microsoft Corporation  Standard Edition on Windows NT 5.2 <X86> (Build 3790: Service Pack 2)
    In short SQL 2008 Standard Edition. Will BPC 7.0 work with it?
    We tried to install the BPC and recived the "Proactive caching" errors. I know we will need this feature for ROLAP.
    Can we keep Standard Edition and make it work? Or we will need EE of SQL for BPC to work?
    Thanks for your help.
    Sam
    Edited by: Sam Patel on Mar 24, 2010 10:05 AM

    SQL Server EE is required for all SAP BPC Microsoft versions.
    BPC is using functionalities from SSAS delivery just with EE.
    Proactive caching is one the features available just into EE not into SE. But are also other features used by BPC from SSAS which can be found just into EE.
    It is true that actually just for SSAS we require EE, for all other componetnts we don't really need EE.
    So the installation will work, but of course you will have some limitations coming from Microsoft.
    For example SQL Server SE is able to handle maximum 4 processors.
    RS can not be installed into Web farm if you are using SE
    And many others.
    I hope this will help you to have a bteer view about what is reguired and why.
    Regards
    Sorin Radulescu
    Edited by: Sorin Radulescu on Mar 25, 2010 2:39 PM

  • Distributed Cache Errors in WFE

    Unexpected error occurred in method 'Put' , usage 'Distributed Logon Token Cache' - Exception 'Microsoft.ApplicationServer.Caching.DataCacheException: ErrorCode<ERRCA0016>:SubStatus<ES0001>:The
    connection was terminated, possibly due to server or network problems or serialized Object size is greater than MaxBufferSize on server. Result of the request is unknown. ---> System.TimeoutException: The socket was aborted because an asynchronous receive
    from the socket did not complete within the allotted timeout of 00:02:00. The time allotted to this operation may have been a portion of a longer timeout. ---> System.IO.IOException: The read operation failed, see inner exception. ---> System.TimeoutException:
    The socket was aborted because an asynchronous receive from the socket did not complete within the allotted timeout of 00:02:00. The time allotted to this operation may have been a portion of a longer timeout. ---> System.Net.Sockets.SocketException: The
    I/O operation has been aborted because of either a thread exit or an application request   
     at System.ServiceModel.Channels.SocketConnection.HandleReceiveAsyncCompleted()   
     at System.ServiceModel.Channels.SocketConnection.OnReceiveAsync(Object sender, SocketAsyncEventArgs eventArgs)     -
    -- End of inner exception stack trace ---   
     at System.Runtime.AsyncResult.End[TAsyncResult](IAsyncResult result)   
     at System.ServiceModel.Channels.ConnectionStream.ReadAsyncResult.End(IAsyncResult result)   
     at System.Net.FixedSizeReader.ReadCallback(IAsyncResult transportResult)     -
    -- End of inner exception stack trace ---   
     at System.Net.Security.NegotiateStream.EndRead(IAsyncResult asyncResult)   
     at System.ServiceModel.Channels.StreamConnection.EndRead()     -
    -- End of inner exception stack trace ---   
     at System.Runtime.AsyncResult.End[TAsyncResult](IAsyncResult result)   
     at System.ServiceModel.Channels.TransportDuplexSessionChannel.EndReceive(IAsyncResult result)   
     at Microsoft.ApplicationServer.Caching.WcfClientChannel.CompleteProcessing(IAsyncResult result)     -
    -- End of inner exception stack trace ---   
     at Microsoft.ApplicationServer.Caching.DataCache.ThrowException(ResponseBody respBody, RequestBody reqBody)   
     at Microsoft.ApplicationServer.Caching.DataCache.InternalPut(String key, Object value, DataCacheItemVersion oldVersion, TimeSpan timeout, DataCacheTag[] tags, String region,
    IMonitoringListener listener)   
     at Microsoft.ApplicationServer.Caching.DataCache.<>c__DisplayClass25.<Put>b__24()   
     at Microsoft.ApplicationServer.Caching.DataCache.Put(String key, Object value, TimeSpan timeout)   
     at Microsoft.SharePoint.DistributedCaching.SPDistributedCache.Put(String key, Object value)'.

    Hi Amol,
    check those links, contains similar issues and resolution
    https://habaneroconsulting.com/insights/sharepoint-2013-distributed-cache-bug#.VJAjsyuUdP0
    http://blogs.msdn.com/b/sambetts/archive/2014/05/28/troubleshooting-appfabric-timeouts-on-sharepoint.aspx
    http://sharepointchips.com/distributed-cache-errors-in-the-uls-log/
    https://www.dmcinfo.com/latest-thinking/blog/id/8657/fix-sharepoint-2013-distributed-cache-timeouts
    https://social.technet.microsoft.com/Forums/sharepoint/en-US/2fad2277-8f5f-4323-8c18-621ae4bfe11a/refresh-the-sp2013-distributed-cache-services-logon-token-cache?forum=sharepointgeneral
    Kind Regards,
    John Naguib
    Technical Consultant/Architect
    MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation
    Please remember to mark your question as answered if this solves your problem

  • ARP cache error

    We have a SBS 2003 server running with a standard dual network configuration.  One card for accessing the internet and the other card to connect the server to the local network.
    We frequently lose our internet connection for an unknown reason (although the other card is fine and all client computers are still able to access the server -- they just loose internet access.)
    We also receive the 'Clearing the ARP Cache' error message when trying to repair the connection.
    However, instead of rebooting the server, we simply go into the Network Connections, locate the card that is for the internet connection, right-click and choose 'Disable', and then after it is disabled, right-click and choose 'Enable'.

    Hi,
    Before going further, would you please let me know if you have configured RRAS on your server? Based on your description, the problem can be caused if you are using RRAS as your basic firewall/NAT.
    Please try the following suggestions to see if the problem can be resolved.
    1. Firstly, we should make sure whether the network setting is correctly and properly configured. Please re-run CEICW Wizard on the SBS Server, it helps us automatically configure the network
    settings, you can refer to this step-by-step article to finish the wizard:
    How to configure Internet access in Windows Small Business Server 2003
    http://support.microsoft.com/kb/825763/en-us
    2. Please double check if you have correctly configured your DNS settings.
    a. Leave the Default Gateway of the internal NIC blank on the SBS Server.
    b. Configure both the internal NIC and the external NIC to use the internal DNS Service as the DNS Server.
    c. On the DNS Server, create the DNS Forwarder to forward the external DNS resolution requests to the ISP's DNS
    d. On the DNS Server, delete any public IP that is being registered in the local DNS.
    3. Type "arp -d *" (without the quotation mark) from the command prompt. Then try repairing the network card again. If error still occurs, please turn to step 4.
    4. Try turning off the "Routing and Remote Access" service, it can cause this problem.
    a. Click Start->Run, type "services.msc", go and find "Routing & Remote Access", right click it and choose Properties.
    b. Set start-up type to disabled and stop the service.
    c. Then restart the computer which is mandatory in this case.
    d. Try repairing the network card again, any luck?
    If the problem persists, please help me gather the following information:
    1. Does everything work normally before? If so, what changes have you made to the server/clients before the problem occurred?
    2. Make sure that you uncheck "register this connections in DNS" check box from external NIC.
    3. Confirm the connection binding order.
    a. Please open Control Panel -> network connections.
    b. Click Advanced -> Advanced settings
    c. In the adapters and bindings tab, make sure that the internal adapter is on the top.
    For your information:
    A Description of the Repair Option on a Local Area Network or High-Speed Internet Connection
    https://support.microsoft.com/kb/289256/en-us
    Hope it helps.
    Best Regards,
    Andy Qi
    Andy Qi
    TechNet Community Support

Maybe you are looking for

  • HR application missing some button in employee information form

    Dear All After upgrade from 12.0.6 to 12.1.1, missing some button in employee information form of HR application when using arabic interface but its working for english interface. buttons like FIND CANCEL DETAILS SAVEAS CLEAR. these are the buttons m

  • HT5012 Can I install two root certificates with the same name in iPad?

    Can I install two root certificates with the same name in iPad?

  • "Pause" Thread, thread creation & run performance

    Hello, I'm having an object executing tasks in response to events (I call it Executer) In "normal" execution mode, it's executing 2 types of tasks: tasks1 and tasks2. when a specific event occurs (pauseEvent), I want it to STOP executing tasks2 for a

  • File to DB Character set conversion

    I really can't get my head around the character set encoding/decoding and when I need to convert explictly so I thought I would ask here. I have a situation where a program needs to read in a file and store the information into an Oracle DB specific

  • Either filesystem or database for image

    hi experts, i want to know that which is better to store images either file-system or database? i am developing a social networking web site and there will be too many images and also to be of larger size. Thanks Shams