BPM Collect pattern is not coming out and it is in loop.

Hi Experts,
We have implemented a BPM Collect Time pattern and it was working fine in Dev and QA environments perfectly. Couple of days back we have some server issue in Dev environment and Basis team has done some thing with File Storage. From that time, all our BPM's were not working in Dev. It is showing that the block is waiting for some event to trigger and it is in Process state. We have set it for 5 min and block is not coming out from loop. We exported the code to QA and it is working in QA. We tried SWU3 transaction as given in the below forum and it didn't help us.
bpm collect time infinite loop error
Some one please help us.
Thanks
Venkat
Edited by: Venkata Gupta on Nov 27, 2008 12:54 AM

Hi
Is Your BPM having deadline branch ?
If there is any system Exception then catch it.
http://help.sap.com/saphelp_nw04/helpdata/en/33/4a773f12f14a18e10000000a114084/content.htm.
According to thread mentioned by you ,Schedule your Missed Deadline Branch.
Also check your BPM using transaction SXMB_MONI_BPE and find out which step have error.

Similar Messages

TS2097 I inserted a new DVD, it is working but not coming out. Whenever I try to eject it, it does not come out. Apple should provide us the easy and manual way to eject CD/DVD or?

Hello,
I inserted a new DVD in my mac book pro, its working and the drive is reading the dvd but unfortunately is not coming out. I have tried several ways mentioned on all over the net and apple community websites but nothing has worked so far.
I need a easier and manual way to eject the DVD. Where is apple's help?
Please help me. This is one of the weaknesses Apple should work on because it is causing us pain and loss of efficiency which is not apple's quality.
Thanks

Thanks for asking, actually I just found a trick on a website.
It siad that restart MBP while holding eject button, I did it and DVD came out right away.
I hope that this works out for everyone.
But still there is a need for a manual eject system so that people don't worry about stucking the DVD or CD in th drive.
Thanks anyway dear.

My sim is stuck in simtray and simtray is not coming out.What should i do?

My sim is stuck in sim tray and it is not coming out.What should i do?

There are instructions on this page for getting the sim tray out : http://support.apple.com/kb/HT4577 . Does that not work ?

BPM Collect Pattern Scenario :Container is empty for the loop at run time

Hi Friends,
I am working on BPM Collect Pattern Scenario after looking into the example delivered by SAP in namespace http://sap.com/xi/XI/System/Patterns and IP name as BpmPatternCollectPayload.
After configuring the same and when it is run, I see strange behaviour as illustrated below
1. Container step is empty and not able to see the counter for which it needs to be incremented at runtime
2. I understand that Loop should start and it need to be incremented as when we get a new message into the same BPM.
But I observe that it is creating a new message and loop never stops and completes the condition and comes out to go to next step.
Request your help.
Regards,
Hussain

Hi,
define or declare a variable with name counter and type as integer in Container where you define abstarct variables...
Thanks,
Madhu

BPM Collect Pattern:File to IDoc

Hi,
My scenario is File to Idoc. An invoice excel file will be sent by the vendor.The excel has a built in macro, which converts the excel to a csv file and file is placed in a file share server.
*Logic of Macro: *
There will be a button in the excel file containing macro. In one excel file there would be multiple invoices that contains different number of item lines, The macro checks the u2018Invoice Numberu2019, lines with the same invoice number will be saved in one CSV file. So for example a excel file contains 5 invoices, when press the button that contains the macro, there will be 5 CSV files created under the same path, each CSV file contains one invoiceu2019s information.
After this I have to post the Inovices in to SAP using an IDoc.
So, I am using BPM collect pattern to achieve this. In the collect pattern, I see a correlation defined on one of the source fields, What does correlation exaclty do in my case. Let's say I have defined a correlation on Source field called Invoice number.
BTW I am using FCC on the filed adapter to change the CSV(Invoice) to xml
Thanks,
Kiran

Hi
to use Xpath for your receiver det. ref these blogs;
a combination of logics should help you in this case ...
Customise your 'XPATH' Expressions in Receiver Determination
XPath to show the path (Multiple Receivers)
File to Multiple IDocs (XSLT Mapping)
Try removing BPM from ur scenario.
1:n could be achieved without BPM
Various multi-mappings and Optimizing their Implementation in Integration Processes (BPM) in XI.
Regards,
Suryanarayana

BPM collect pattern based on payload

Hi,
i am doing BPM Collect pattern based on stop message which is RFC. Means, i need to collect the IDOCs until i get the RFC from another system.
For this i am using predefined pattern BPMcolllect pattern which is in BASIS SWCV.
is it possible to do with out correlation?
if correlation is required, there should be one common fiield between two messages?
Thanks,
karthik

Hi ,
Your design it self wrong, when you develop interface as a sender IDoc , then how come you will receive RFC in to BPM??
so check your requirement with your client, if you want to collect messages there are different ways, implementing patterns in last option.
search in sdn.
Regards,
Raj

VFL Speaker sound from both the front speakers while FR sound is not coming out at all.

I have a creative gigaworks s750 connected to a xtreme gamer sound card. The system was working absolutely fine but now it has started behaving very strangely; system is playing back Front Left Speaker sound from both the front speakers while Front Right sound is not coming out at all. If i click the front right speaker in audio console speaker setup wizard, no sound comes. However when i click the front left speaker, sound comes out of both speakers. I counter checked it with playing 5.1 dts movie and muting all the speakers except the front left one from ac3 filter, sound came out of both the front speakers. However when i muted all the channel except the front right, no sound was coming out of front right speaker.
Message Edited by hussain on 06-10-2009 10:26 PM

Just want to add another relieved reader of this thread. I had lost the sound to my speakers even though I had sound to headphones. I was convinced it was a damaged headphone jack because I had pushed the headphone plug in harder the last evening when my wife complained that she could still hear the speakers while I listened with the headphones. The next morning--no speaker sound.
I spent a few hours searching the web to see how to disassemble a satellite A505 and get to the jack. But I wasn't even sure I could get a proper replacement jack that fit, and I was concerned that small damage, say to the ribbon connectors could render the computer useless--a large price to pay for just missing audio.
Fortunately, I stumbled onto this thread and I recalled I had put the unit to sleep the night before--something I don't usually do, but I didn't want all the Chrome web sites to have to reload so I just put it to sleep.
When I put it to sleep again and fired it up--Sound! I am so glad to find this solution so I just want to let people know it remains a viable option.
Doug

Laptop is not coming out from hibernating

regardings,my laptop is not coming out from hibernation. it is showing that is is going to hibernate but stuck there.it is showing that it is working. i wait for an hour but result is tha same. then i tried to restart but same result. can u help me in this metter

It's hard to say what the problem is. One recomendation would be to drop usage of the database connectivity toolkit as it adds a lot of complexity and limits your options for troubleshooting problems. There is an alternative here. Read the discussion and download the drivers...
Also, what kind of database are you connecting to?
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Itunes sound not coming out of ipod4

I can't get my ipod4 to play itunes outside of the apple store. Both Apple store and anywhere else with wifi show I have a connection. It shows the song playing but no sound is coming out and my ipod works perfectly (bought it refurbished 3 weeks ago).

Did you already try to reset the iPod by holding the sleep and home button for about 10sec, until the Apple logo comes back again? You will not lose data by resetting.
Can you play music using the headphones?
More troubleshooting here:
iPod touch: Hardware troubleshooting

Ink not coming out from new cartridge

I purchased the color and black cartridge from HP store. After installation the black ink is not coming out. Tried and checked all software settings and it seems the cartridge have some problem. Contacted customer service but no help. Can any one help?
It is a 3515 deskjet all in one printer and printer head is not detachable.

Hi jkoley, and welcome to the HP Forums!
I see you are running into black ink issues. I would like to help.
I would recommend removing the ink cartridges, and performing a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also recommend utilizing the steps in this document on Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

When i charged my phone,The plug in itune picture came out.But when i plug in my computer,the apple keep coming out and going off.So what should i do?

When i charged my phone,The plug in itune picture came out.But when i plug in my computer,the apple keep coming out and going off.So what should i do?

to me it sounds like it need repair

HT1296 my ipad mail is not going out and my games/answers do not sync back and forth

my ipad mail is not going out and my games and answers to not transfer back and forth with the person I play.

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
iPad Mail
http://www.apple.com/support/ipad/mail/
 Cheers, Tom

HT1600 turned my Apple TV on and get continuos flashing light, on my tv I get a picture of Apple TV unit with a cable coming out and a large iTunes icon

turned my Apple TV on and get continuos flashing light, on my tv I get a picture of Apple TV unit with a cable coming out and a large iTunes icon

http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US

We have been having some issues with Email notifications not going out and getting hung up in SOST. Can anyone please tell me whether we can use Solution Manager to monitor outbound emails?

We have been having some issues with Email Notifications not going out and getting hung up in SOST. Can anyone please tell me whether we can use SAP Solution Manager to monitor outbound email?

What version of Solman are you using ? Check in t-code Rz20 >ccms monitor template of satelliate system , there would be option to monitor your outbound mails .You can sutomise your monitorig metrics in solman 7.1 else in 7.01 you use auto reaction methods to monitor .
Regards
Jay

Interface Mappings in BPM Collect Pattern

Hello
I am new to XI development and currently facing problems while implementing collect pattern of BPM.
I am trying to map IDoc structure with target legacy format.In BPM I had a block with infinite loop where I am transforming IDocs to target legacy format.Then I am trying to transform list element (Multiline Abstract container variable) to form a single message.For this I tried to have interface map with Occurences 0..unbound..but while activation of Interface Map it gives error
<b> Mapping program Message does not match the interface mapping. The number or frequencies of source or target messages for the message mapping are not identical to the number or frequencies of source or target interfaces.</b>
If I use single line in Interface map then in BPM it gives error when passed Multiline element to this Interface map.
I checked the sample program provided by SAP but I found out that every message interface was using same Message Type which has got occurence as 1 but in the message mapping program its 0..unbound.
My question is can we have data type (or Message type )with Occurence as 1 and Message Mapping program using same message type with occurences 0..unbound..I tried to find such option but could'nt find that.Otherwise how to do Interface Map for transforming Multiline parameter of BPM to a single message.
Please help..Thanks in advance..
Regards
Rajeev Patkie

Initially I tried to perform test by tree view and it worked fine.But it was one message in the source and the same was in target.Later as given by you I updated XML source message.The source message looks like
******************Source Message***********************
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1>
    <ns1:MATMAS_to_Stockware_MT xmlns:ns1="http://mccormick.com/ez_dev">
      <MAT_List>
        <ZPITNO>121212</ZPITNO>
        <ZPIDS>Test Message</ZPIDS>
        <ZPPOPN />
        <ZPCNQT />
        <ZPZLOC />
        <ZPZPCB />
        <ZPZCPA />
        <ZPGRWE />
        <ZPSAEL />
        <ZSPLDY />
        <ZPFRAG />
        <ZPZCRO />
        <ZPZOPT />
      </MAT_List>
    </ns1:MATMAS_to_Stockware_MT>
</ns0:Message1>
</ns0:Messages>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message2>
    <ns1:MATMAS_to_Stockware_MT xmlns:ns1="http://mccormick.com/ez_dev">
      <MAT_List>
        <ZPITNO>78912</ZPITNO>
        <ZPIDS>Test Message12</ZPIDS>
        <ZPPOPN />
        <ZPCNQT />
        <ZPZLOC />
        <ZPZPCB />
        <ZPZCPA />
        <ZPGRWE />
        <ZPSAEL />
        <ZSPLDY />
        <ZPFRAG />
        <ZPZCRO />
        <ZPZOPT />
      </MAT_List>
    </ns1:MATMAS_to_Stockware_MT>
</ns0:Message2>
</ns0:Messages>
************************End Source*********************
if this would be the message multiline is generating its bound to fail as I guess every XML has one topmost element and over here.So I changed my source XML to look like
******************Start message******************
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1>
    <ns1:MATMAS_to_Stockware_MT xmlns:ns1="http://mccormick.com/ez_dev">
      <MAT_List>
        <ZPITNO>121212</ZPITNO>
        <ZPIDS>Test Message</ZPIDS>
        <ZPPOPN />
        <ZPCNQT />
        <ZPZLOC />
        <ZPZPCB />
        <ZPZCPA />
        <ZPGRWE />
        <ZPSAEL />
        <ZSPLDY />
        <ZPFRAG />
        <ZPZCRO />
        <ZPZOPT />
      </MAT_List>
    </ns1:MATMAS_to_Stockware_MT>
</ns0:Message1>
<ns0:Message2>
    <ns1:MATMAS_to_Stockware_MT xmlns:ns1="http://mccormick.com/ez_dev">
      <MAT_List>
        <ZPITNO>78912</ZPITNO>
        <ZPIDS>Test Message12</ZPIDS>
        <ZPPOPN />
        <ZPCNQT />
        <ZPZLOC />
        <ZPZPCB />
        <ZPZCPA />
        <ZPGRWE />
        <ZPSAEL />
        <ZSPLDY />
        <ZPFRAG />
        <ZPZCRO />
        <ZPZOPT />
      </MAT_List>
    </ns1:MATMAS_to_Stockware_MT>
</ns0:Message2>
</ns0:Messages>
**********************End Message****************
but this produces only one output message
******************Start Message***********************
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1>
    <ns1:MATMAS_to_Stockware_List xmlns:ns1="http://mccormick.com/ez_dev">
      <MAT_List>
        <ZPITNO>121212</ZPITNO>
        <ZPIDS>Test Message</ZPIDS>
        <ZPPOPN />
        <ZPCNQT />
        <ZPZLOC />
        <ZPZPCB />
        <ZPZCPA />
        <ZPGRWE />
        <ZPSAEL />
        <ZSPLDY />
        <ZPFRAG />
        <ZPZCRO />
        <ZPZOPT />
      </MAT_List>
    </ns1:MATMAS_to_Stockware_List>
</ns0:Message1>
</ns0:Messages>
**********************End Message****************
I am also pasting schema of message mappings
*****************Source Schema************************
<?xml version="1.0" encoding="UTF-8"?>
<xsd:schema targetNamespace="http://sap.com/xi/XI/SplitAndMerge" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://sap.com/xi/XI/SplitAndMerge">
<xsd:import namespace="http://mccormick.com/ez_dev" />
<xsd:element name="Messages" xmlns:p0="http://mccormick.com/ez_dev">
    <xsd:complexType>
      <xsd:sequence>
        <xsd:element name="Message1" form="qualified">
          <xsd:complexType>
            <xsd:sequence>
              <xsd:element ref="p0:MATMAS_to_Stockware_MT" minOccurs="0" maxOccurs="unbounded" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
            </xsd:sequence>
          </xsd:complexType>
        </xsd:element>
      </xsd:sequence>
    </xsd:complexType>
</xsd:element>
</xsd:schema>
********************End Source***********************
********************Target Schema******************
<?xml version="1.0" encoding="UTF-8"?>
<xsd:schema targetNamespace="http://sap.com/xi/XI/SplitAndMerge" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://sap.com/xi/XI/SplitAndMerge">
<xsd:import namespace="http://mccormick.com/ez_dev" />
<xsd:element name="Messages" xmlns:p0="http://mccormick.com/ez_dev">
    <xsd:complexType>
      <xsd:sequence>
        <xsd:element name="Message1" form="qualified">
          <xsd:complexType>
            <xsd:sequence>
              <xsd:element ref="p0:MATMAS_to_Stockware_List" />
            </xsd:sequence>
          </xsd:complexType>
        </xsd:element>
      </xsd:sequence>
    </xsd:complexType>
</xsd:element>
</xsd:schema>
****************************End Target*************
Thanks in advance.
Regards
Rajeev

BPM Collect pattern is not coming out and it is in loop.

Similar Messages

Maybe you are looking for