BPM collection pattern - Expression must not return a multiline value

Hi,
I am trying to create an integration process to collect messages - when I run the check function I get the message 'Expression must not return a multiline value' - I have checked everything and cannot find what is causing this message.  When I click on the message I get taken to the transformation step properties.
Any ideas?
Regards
Ian

HI,
Your Interface Mapping should be of N:1 type.
i.e occurence of your source message should be of 0..unbounded and target message should be 1.
Once you change Interface Mapping, you need to change occurences of corresponding Message Maaping.
Use this interface mapping in your Transformation Step in BPM, where you collect all the messages.
Hope this helps,
Regards,
Moorthy

Similar Messages

  • Error: Expression must not return a multiline value

    Hi all,
    I am doing a file to file scenario. My input file has more than one record. I have to validate for each of these records and send back the erroneous records in a file to the source folder.
    I am using BPM for this. In my BPM, i have some multiline container elements. When i try to activate my BPM, i am getting an error saying: <b>Expression must not return a multiline value.</b>
    Can anybody tell me why this error is coming? Also i want to know what type of mapping i have to do to split my source file.
    Regards,
    Divija.

    "Can anybody tell me why this error is coming? Also i want to know what type of mapping i have to do to split my source file."
    Go through the following blogs which give step-bystep approach for split mapping using BPM:-
    1. /people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
    2. /people/narendra.jain/blog/2005/12/30/various-multi-mappings-and-optimizing-their-implementation-in-integration-processes-bpm-in-xi
    Also, you might want to look at this, where a BPM is not required..i think you can avoid a BPM altogether if you have very little validation..
    /people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
    Regards,
    Sushumna

  • Error / BUG in BPM SAP PI7.1 "Expression must not return a multiline value"

    Hey experts,
    I try to use a MULTILINE interface in an integration process, but when I try to select the multiline interface in the sending Step (asynch), then I can´t select a INDEX variable? ...
    See here: Picture of ERROR
    I tried my steps with a XI3.0 in exactly the same way and it works. Is this a bug in the PI? We have Service Package 04 (initial Shipment).
    Does anyone has an idea?
    Thanks a lot for fast help
    Rgds,
    Steffen

    Hi,
    I tested it on a PI 7.1 SP 8 and there it works.
    What you could try is to export your Integration Process from XI 3.0 (you said it's working) and import it in your PI 7.1.
    Regards
    Patrick

  • Expression must not return a multilne value

    Hi
    I am trying to create PurchaseOrder message via BPM.
    The target MI has:
    One Header record
    Unbounded Items records
    In BPM, Fork of 2 braches is created to recieve Header, another branch use looping to received Items and store into ItemsList
    After the fork, a tarnsformation is use to create target MI, which the source contains:
    Header (single record) and
    ItemList (multiline with Item record)
    Now the problem, when I do a check, I always hit the error: "Expression must not return a multilne value"
    However if use :
    Header (single record) and
    Item (single Item record)
    OR
    HeaderList (multiline record) and
    ItemList (multiline Item record)
    It does not generate this error.
    I seems the tarsnformation does not allow mixing of "Multiline" and "Singleline" for N:1 transformation???
    Please advise
    //jack
    Message was edited by: JackLim

    Hmmmmm ...
    >>>
    tarnsformation is use to create target MI, which the source contains:
    Header (single record) and
    ItemList (multiline with Item record)
    Recheck the parameters of the transformation step

  • BPM Collect Pattern Scenario :Container is empty for the loop at run time

    Hi Friends,
    I am working on BPM Collect Pattern Scenario after looking into the example delivered by SAP in namespace http://sap.com/xi/XI/System/Patterns and IP name as BpmPatternCollectPayload.
    After configuring the same and when it is run, I see strange behaviour as illustrated below
    1. Container step is empty and not able to see the counter for which it needs to be incremented at runtime
    2. I understand that Loop should start and it need to be incremented as when we get a new message into the same BPM.
    But I observe that it is creating a new message and loop never stops and completes the condition and comes out to go to next step.
    Request your help.
    Regards,
    Hussain

    Hi,
    define or declare a variable with name counter and type as integer in Container where you define abstarct variables...
    Thanks,
    Madhu

  • BPM Collect Pattern:File to IDoc

    Hi,
    My scenario is File to Idoc. An invoice excel file will be sent by the vendor.The excel has a built in macro, which converts the excel to a csv file and file is placed in a file share server.
    *Logic of Macro: *
    There will be a button in the excel file containing macro. In one excel file there would be multiple invoices that contains different number of item lines, The macro checks the u2018Invoice Numberu2019, lines with the same invoice number will be saved in one CSV file. So for example a excel file contains 5 invoices, when press the button that contains the macro, there will be 5 CSV files created under the same path, each CSV file contains one invoiceu2019s information.
      After this I have to post the Inovices in to SAP using an IDoc.
    So, I am using BPM collect pattern to achieve this. In the collect pattern,  I see a correlation defined on one of the source fields,  What does correlation exaclty do in my  case. Let's say I have defined a correlation on Source field called Invoice number.
    BTW I am using FCC on the filed adapter to change the CSV(Invoice) to xml
    Thanks,
    Kiran

    Hi
    to use Xpath for your receiver det. ref these blogs;
    a combination of logics should help you in this case ...
    Customise your 'XPATH' Expressions in Receiver Determination
    XPath to show the path (Multiple Receivers)
    File to Multiple IDocs (XSLT Mapping)
    Try removing BPM from ur scenario.
    1:n could be achieved without BPM
    Various multi-mappings and Optimizing their Implementation in Integration Processes (BPM) in XI.
    Regards,
    Suryanarayana

  • BPM collect pattern based on payload

    Hi,
    i am doing BPM Collect pattern based on stop message which is RFC. Means, i need to collect the IDOCs until i get the RFC from another system.
    For this i am using predefined pattern BPMcolllect pattern which is in BASIS SWCV.
    is it possible to do with out correlation?
    if correlation is required, there should be one common fiield between two messages?
    Thanks,
    karthik

    Hi ,
    Your design it self wrong, when you develop interface as a sender IDoc , then how come you will receive RFC in to BPM??
    so check your requirement with your client, if you want to collect messages there are different ways, implementing patterns in last option.
    search in sdn.
    Regards,
    Raj

  • Execute Method must not return a resultSet

    Hi.
    I am using DataModifyQuery to insert a record in MS SQL. On that Table there is one trigger defined whcih in turn insert data into some other table. in case there is any error the trigger return a error message.
    When i execute the Sql with DataModifyQuery and there is a error return from the trigger then Toplink gives me a error message.
    Execute Method must not return a resultSet
    how can i over come this sistuation.
    Thanks.

    Nadir wrote:
    I was lost. Right, there was no return statement. Below works now
    public String getIPAddress(){
    String hostip = "";
    try {
    hostip = InetAddress.getLocalHost().getHostAddress();
    System.out.println("ip is "+hostip);
    } catch (UnknownHostException e) {
    hostip = e.getMessage();
    return hostip;
    -----It compiles. I wouldn't say it works. If I call a method getIPAddress(), I expect the String I get back to be an IP address. I don't want to have to parse it to determine that it's not an error message. That defeats the whole purpose of the exception mechanism. If that method can't get the IP address, it should throw an exception. In this case, there's no reason to catch the exception; just let it propagate up out of that method.
    Beginners often seem to think that exceptions are something that just arose on their own out of the language, and the designers had to add try/catch in order to be able to stop them from preventing our code executing. That's not the case. They were deliberately added to the language as a better way of indicating an error than checking return values at every step.

  • BPM Collect pattern is not coming out  and it is in loop.

    Hi Experts,
    We have implemented a BPM Collect Time pattern and it was working fine in Dev and QA environments perfectly. Couple of days back we have some server issue in Dev environment and Basis team has done some thing with File Storage. From that time, all our BPM's were not working in Dev. It is showing that the block is waiting for some event to trigger and it is in Process state.  We have set it for 5 min and block is not coming out from loop.   We exported the code to QA and it is working in QA.  We tried SWU3 transaction as given in the below forum and it didn't help us.
    bpm collect time infinite loop error
    Some one please help us.
    Thanks
    Venkat
    Edited by: Venkata Gupta on Nov 27, 2008 12:54 AM

    Hi
    Is Your BPM having deadline branch ?
    If there is any system Exception then catch it.
    http://help.sap.com/saphelp_nw04/helpdata/en/33/4a773f12f14a18e10000000a114084/content.htm.
    According to thread mentioned by you ,Schedule your Missed Deadline Branch.
    Also check your BPM using transaction SXMB_MONI_BPE and find out which step have error.

  • Interface Mappings in BPM Collect Pattern

    Hello
    I am new to XI development and currently facing problems while implementing collect pattern of BPM.
    I am trying to map IDoc structure with target legacy format.In BPM I had a block with infinite loop where I am transforming IDocs to target legacy format.Then I am trying to transform list element (Multiline Abstract container variable) to form a single message.For this I tried to have interface map with Occurences 0..unbound..but while activation of Interface Map it gives error
    <b> Mapping program Message does not match the interface mapping. The number or frequencies of source or target messages for the message mapping are not identical to the number or frequencies of source or target interfaces.</b>
    If I use single line in Interface map then in BPM it gives error when passed Multiline element to this Interface map.
    I checked the sample program provided by SAP but I found out that every message interface was using same Message Type which has got occurence as 1 but in the message mapping program its 0..unbound.
    My question is can we have data type (or Message type )with Occurence as 1 and Message Mapping program using same message type with occurences 0..unbound..I tried to find such option but could'nt find that.Otherwise how to do Interface Map for transforming Multiline parameter of BPM to a single message.
    Please help..Thanks in advance..
    Regards
    Rajeev Patkie

    Initially I tried to perform test by tree view and it worked fine.But it was one message in the source and the same was in target.Later as given by you I updated XML source message.The source message looks like
    ******************Source Message***********************
    <ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
      <ns0:Message1>
        <ns1:MATMAS_to_Stockware_MT xmlns:ns1="http://mccormick.com/ez_dev">
          <MAT_List>
            <ZPITNO>121212</ZPITNO>
            <ZPIDS>Test Message</ZPIDS>
            <ZPPOPN />
            <ZPCNQT />
            <ZPZLOC />
            <ZPZPCB />
            <ZPZCPA />
            <ZPGRWE />
            <ZPSAEL />
            <ZSPLDY />
            <ZPFRAG />
            <ZPZCRO />
            <ZPZOPT />
          </MAT_List>
        </ns1:MATMAS_to_Stockware_MT>
      </ns0:Message1>
    </ns0:Messages>
    <ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
      <ns0:Message2>
        <ns1:MATMAS_to_Stockware_MT xmlns:ns1="http://mccormick.com/ez_dev">
          <MAT_List>
            <ZPITNO>78912</ZPITNO>
            <ZPIDS>Test Message12</ZPIDS>
            <ZPPOPN />
            <ZPCNQT />
            <ZPZLOC />
            <ZPZPCB />
            <ZPZCPA />
            <ZPGRWE />
            <ZPSAEL />
            <ZSPLDY />
            <ZPFRAG />
            <ZPZCRO />
            <ZPZOPT />
          </MAT_List>
        </ns1:MATMAS_to_Stockware_MT>
      </ns0:Message2>
    </ns0:Messages>
    ************************End Source*********************
    if this would be the message multiline is generating its bound to fail as I guess every XML has one topmost element and over here.So I changed my source XML to look like
    ******************Start message******************
    <ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
      <ns0:Message1>
        <ns1:MATMAS_to_Stockware_MT xmlns:ns1="http://mccormick.com/ez_dev">
          <MAT_List>
            <ZPITNO>121212</ZPITNO>
            <ZPIDS>Test Message</ZPIDS>
            <ZPPOPN />
            <ZPCNQT />
            <ZPZLOC />
            <ZPZPCB />
            <ZPZCPA />
            <ZPGRWE />
            <ZPSAEL />
            <ZSPLDY />
            <ZPFRAG />
            <ZPZCRO />
            <ZPZOPT />
          </MAT_List>
        </ns1:MATMAS_to_Stockware_MT>
      </ns0:Message1>
      <ns0:Message2>
        <ns1:MATMAS_to_Stockware_MT xmlns:ns1="http://mccormick.com/ez_dev">
          <MAT_List>
            <ZPITNO>78912</ZPITNO>
            <ZPIDS>Test Message12</ZPIDS>
            <ZPPOPN />
            <ZPCNQT />
            <ZPZLOC />
            <ZPZPCB />
            <ZPZCPA />
            <ZPGRWE />
            <ZPSAEL />
            <ZSPLDY />
            <ZPFRAG />
            <ZPZCRO />
            <ZPZOPT />
          </MAT_List>
        </ns1:MATMAS_to_Stockware_MT>
      </ns0:Message2>
    </ns0:Messages>
    **********************End Message****************
    but this produces only one output message
    ******************Start Message***********************
    <?xml version="1.0" encoding="UTF-8"?>
    <ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
      <ns0:Message1>
        <ns1:MATMAS_to_Stockware_List xmlns:ns1="http://mccormick.com/ez_dev">
          <MAT_List>
            <ZPITNO>121212</ZPITNO>
            <ZPIDS>Test Message</ZPIDS>
            <ZPPOPN />
            <ZPCNQT />
            <ZPZLOC />
            <ZPZPCB />
            <ZPZCPA />
            <ZPGRWE />
            <ZPSAEL />
            <ZSPLDY />
            <ZPFRAG />
            <ZPZCRO />
            <ZPZOPT />
          </MAT_List>
        </ns1:MATMAS_to_Stockware_List>
      </ns0:Message1>
    </ns0:Messages>
    **********************End Message****************
    I am also pasting schema of message mappings
    *****************Source Schema************************
    <?xml version="1.0" encoding="UTF-8"?>
    <xsd:schema targetNamespace="http://sap.com/xi/XI/SplitAndMerge" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://sap.com/xi/XI/SplitAndMerge">
      <xsd:import namespace="http://mccormick.com/ez_dev" />
      <xsd:element name="Messages" xmlns:p0="http://mccormick.com/ez_dev">
        <xsd:complexType>
          <xsd:sequence>
            <xsd:element name="Message1" form="qualified">
              <xsd:complexType>
                <xsd:sequence>
                  <xsd:element ref="p0:MATMAS_to_Stockware_MT" minOccurs="0" maxOccurs="unbounded" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
                </xsd:sequence>
              </xsd:complexType>
            </xsd:element>
          </xsd:sequence>
        </xsd:complexType>
      </xsd:element>
    </xsd:schema>
    ********************End Source***********************
    ********************Target Schema******************
    <?xml version="1.0" encoding="UTF-8"?>
    <xsd:schema targetNamespace="http://sap.com/xi/XI/SplitAndMerge" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://sap.com/xi/XI/SplitAndMerge">
      <xsd:import namespace="http://mccormick.com/ez_dev" />
      <xsd:element name="Messages" xmlns:p0="http://mccormick.com/ez_dev">
        <xsd:complexType>
          <xsd:sequence>
            <xsd:element name="Message1" form="qualified">
              <xsd:complexType>
                <xsd:sequence>
                  <xsd:element ref="p0:MATMAS_to_Stockware_List" />
                </xsd:sequence>
              </xsd:complexType>
            </xsd:element>
          </xsd:sequence>
        </xsd:complexType>
      </xsd:element>
    </xsd:schema>
    ****************************End Target*************
    Thanks in advance.
    Regards
    Rajeev

  • BPM Collect Pattern: N:1 Mapping error in trnsformation step

    Dear All,
    I am using collect pattern Payload Dependant.
    I have one source data type and one target data type. Mapping is one to one.
    Data type contains 3 fields, Value Name and Surname.
    In Loop I have used condition when Counter is equal to value stop the loop.
    I have used Transformation step as I am using N:1 mapping.
    I have used abastrct to abastract message mapping.
    Source message is 0 to unbounded.
    In interface mapping target message occourance is 1. But in mapping program target message occourance is 0 to unbounded.
    When I am running my scenario, Third party to IP is working fine. But in IP i am getting error in transformation step.
    "com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:Messages/ns0:Message1/ns1:Collect_Receiver_MT. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.start"
    Can anybody will help me to solve this problem?
    Warm Regards,
    Gouri

    Have a look
    http://help.sap.com/saphelp_nw04/helpdata/en/de/766840bf0cbf49e10000000a1550b0/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/cb/15163ff8519a06e10000000a114084/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/content.htm
    /people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
    /people/kannan.kailas/blog/2005/12/07/posting-multiple-idocs-with-acknowledgement
    Also have a look at these seminars,
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/daea5871-0701-0010-12aa-c3a0c6d54e02
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/e8515171-0701-0010-be98-e37bec4706cc
    Thanks

  • BPM Collect Pattern.

    Hi Experts !
    I am trying to implement this scenario.
    Source File Adapter -
    Message - Vendor # - Material # [Only one material ]
    Pattern : Collect Pattern
    Key for Correlation - Vendor #
    Message collection in Loop for a counter of 3 Messages.
    Target file on Directory to be created using file adapter should be of this structure:
    <Header> 1.1
    vendor
    <Header/>
    <Items> 1..Unbounded
    <Material>Matl1 <Material/>
      <Material>Matl2<Material>
      <Material>Matl3<Material/>
    <Items/>
    When collect messages into a multiline container it will be based on source message.  The multiline container will be looking like this:
    vendor# Material#
    vendor# Material#
    vendor# Material#
    after all the three records are collected.
    What mapping from this point is required to get the output explaine above.
    Please mention whether it is a step outside BPM or inside BPM.
    When system encounters a multiline container does it process each message at a time or is the mapping applied to all the messages at a time.
    Thanks in advance..

    Thanks for sharing your views.
    As I mentioned I will stop collection based on a counter.
    Coming to my question again..
    N : 1 Mapping..
    Can you elaborate on N:1 mapping you are suggesting.
    Here is what I did ..
    One Msg...   -
    >         Multine Line                           Mapping
    abs                          similar to One msg          source                target
                                                                        multiline abs        target_abs..
    Message Mapping details...this is what i use in Intf.Map..aplied above.
      vendorx         -
    > VendorX
      material1 1.1 -
    > Material [1..n]
    where the output I get is only the last item processed...
    If I pass                                       Output
      Vendor1 - Matl1                       Vendor - Matl3....
      Vendor1 - Matl2
      Vendor1 - Matl3
    Where am I going wrong...
    thanks.

  • Query from OCI-11.2.0.3 library to 10g Express DB not returning results

    Hi,
    I am trying to fetch column data using the following query run on 10g Express DB running on Windows 7.
    select a.column_name, a.data_type, a.data_length, a.NULLABLE, nvl(c.CONSTRAINT_TYPE, 0), nvl(e.index_type, 0) from
    dba_tab_cols a left join dba_cons_columns b on ( a.OWNER=b.owner and a.TABLE_NAME=b.TABLE_NAME and a.column_name=b.column_name)
    left join dba_constraints c on (b.CONSTRAINT_NAME=c.CONSTRAINT_NAME and b.OWNER=c.owner and b.TABLE_NAME=c.TABLE_NAME)
    left join dba_ind_columns d on ( a.OWNER=d.table_owner and a.TABLE_NAME=d.TABLE_NAME and a.column_name=d.column_name)
    left join dba_indexes e on (d.index_name=e.index_name and a.OWNER=e.owner and a.TABLE_NAME=e.TABLE_NAME)
    where a.table_name=:TBLNAME
    My VC++ application is linked against "instantclient-sdk-nt-11-2-0-3-0\lib\msvc\oci.lib".
    Calls to OCIStmtPrepare2 and following OCIBindByName are succeeding.
    text inputval[32] = {'\0'};
    ub2 inputvallen = 32;
    OCIBind *pbnd = 0;
    ret = OCIBindByName(stmthp, &pbnd, errhp, (text*)":TBLNAME",
    strlen(":TBLNAME"), (dvoid*)inputval,
    (sword)inputvallen, SQLT_STR, (dvoid*)0,
    (ub2*)0,(ub2*)0, (ub4)0, (ub4*)0, OCI_DEFAULT);
    I am setting the TBLNAME in single quotes in inputval variable before the call to OCIStmtExecute, which is also passing.
    But, OCIStmtFetch2 always returns 0 rows (OCI_NO_DATA).
    If I change this query to use the tablename explicitly in the above select statement, it works fine and I get rows > 0.
    What could be wrong in this call to OCIBindByName? Or is there a compatibility issue between OCI-11.2.0.3 library and 10g Express database?
    Please guide.
    Thanks and Regards,
    - ganesh

    What could be wrongDunno, if you can get the SQL working outside the OCI setup must be something else where the code isn't handling the :TBLNAME as expected.
    This forum {forum:id=168} may get better help there or one of the other programming forums.

  • Necessary steps for incorporating BPM collect pattern?

    I am working on my first BPM.
    The scenario is as follows: Supplier information (CREMAS) has to be splitted into their respective receiver countries (This has been done with a switch) For each country all CREMAS has to be collected into one XML and sent.
    I have decided on BPMCollectPatternTime.
    What should I do in order to include a CollectPattern in my BPM?
    What design objects should I copy to my namespace?
    And how to configure receive, loop and transformation?

    Hi Thomas,
    So you are sending multiple CREMAS IDocs to SAP XI and you want a BPM to collect the IDocs together into separate XML messages by country.
    In this case you dont need a switch statement, just use a time based collection routine and a correllation on the country field.
    We have used this method extensively, you want to choose how to terminate the BPM. You can set up an infinite loop scenario with a time based termination via a deadline branch.
    In order to use this in your own BPM create the Integration Process and add the following steps in the editor, this will aid you in understanding the various steps and how the process works.
    You will need 3 Abstract Message Types:
    1) Single IDoc Message Type
    2) Multiline IDoc Message Type for Appended IDocs
    3) Non Multiline IDoc Message type for the List of collected IDocs
    First add a block step
      Mode = Default
      Local Correlation = Define Correlation on Country
    Within the block step:
    Deadline Branch = 1 minute for example
      Control step = Throw Exception
                          |
    Main Branch = boldLoop Step Beginbold --- Receive Idoc Step --- Container Operation --- boldLoop Step Endbold
    Loop Step
      Condition = (1 = 1)
    Receive Step
      Message = Abstract Message Interface
      Use Correlation = Local Correlation
    Container Operation
      Operation Append
    Outside the block step:
    Transformation Step
    Send Step
    Hope this helps,
    Pete

  • V$session prev_hash_value not returning the correct value?

    Hello,
    I am executing a plsql package (which has the following query) in two modes: through Toad and through a deployed web application. I get two results.
    SELECT sa.sql_text,
    sa.sql_id,
    ss.sid
    FROM v$session ss,
    v$sqlarea sa
    WHERE ss.status = 'ACTIVE'
    AND sa.hash_value = ss.prev_hash_value
    AND ss.username = USER;
    Toad gives me the correct result. The query above pulls the correct SQL statement. But when running through the web application it gives me
    some random SQL statement executed during that session. I thought it might have something to do with pooled JDBC connections so I made sure for that
    execution I created a new dedicated JDBC connection. Still did not work. I used the function SYS_CONTEXT('USERENV', 'SID') to report the session id
    from my java program and from the query above. Both return the same SID. I've tried different variations of that query above (removing status = ACTIVE, removing username = USER, etc...)
    and I still get the same result.
    So any thoughts on what's going on?
    Thanks,
    Piyush

    I believe I figured it out. My testing was flawed. The testing in Toad was directly calling my package (e.g., pkg_b). The web app doesn't do that. It calls pkg_a which does a bunch of setup and then calls the target package (pkg_b) using EXECUTE IMMEDIATE. Apparently the v$session stops collecting info at that point. The current statement always shows as 'BEGIN :b1 := pkg_b; END;'. But it's still confusing why it would do that. Is there another way to access SQL statements from within that dynamic block?

Maybe you are looking for

  • Update E-mail address for Vendor

    Can anyone please help me with a Function Module or BAPI to update the E-mail address in ADR6 for a Vendor.

  • Formula node with global variable

    Hi, I am tring to use formula node with global variables as an input and output, but this is where I see the SW hangs forever. By the way I am a novice to the labview. Can some give me hint why this is happening? Thank you in advance, Do Solved! Go t

  • Issue opening pdf's in IE8 XP

    Hello, I'm having trouble opening pdf's through an internet sharepoint. When left clicking them the page either refreshes or gives the error "Internet Explorer has stopped trying to restore this website. It appears that the website continues to have

  • Who did I mail to?

    I am making the transition from Eudora to Mail.app. I commonly send out messages to friends and, out of courtesy, bcc all but one address. I am noticing that when I go to check the messages I have sent with several addies in the bcc field, there is n

  • Fancy zoom pics with transparent background

    hello, i have successfully setup fancy zoom in my iweb site (based on the various tutorials found on the web), but there is one problem i'm having. the pics i'm using are .png with transparent background and the background renders properly in safari.