BPM Composer not show login screen in SOA VM machine for Oracle VirtualBox
Installed Oracle Virtual Box (4.2.4) and installed the SOA_BPM domain appliance (using SOA & BPM Development VM) - not a problem.
When attmpt to access http://localhost:7001/bpm/composer - simply get a blank screen - nothing on it.
When attempt to access bpm/workspace - no problem - get a login screen.
Help - what is happening, how do I get a login screen for http://localhost:7001/bpm/composer
Thanks - Casey
Hi,
I'm not sure how the domain is organised in that vm, but you have to make sure you are using the port-number of the soa_server, not the AdminServer.
Hope this helps...
Cheers,
Vlad
Similar Messages
-
User updated to WinXP SP3 and now it does not show login screen
Hi,
I have a user that updated to Windows XP3, that Install and shutdown option, but the user closed the notebook.
Now Windows XP boots but after showing the mouse and the blue wallpaper, the login screen never appears and windows stops there.
The mouse pointer is from windows and it is moving, the hard disk shows no activity, no funny noise, etc.
I think it was a problem with the update. I even have done a Install in place of windows xp sp2 and nothing.
Could it be hardware? Or just windows?
Many thanks
OliverDude! Why did you unistall IE7? I don't know that I've ever heard that being a problem in all the few thousand posts I've read.
My recommendation at his point is to boot in the safe mode and do a restore to a time when you didn't have any problems.
It's going to take some good decisions at this point. Let us know how it goes.
One of the rules is not to make things worse than they are... just to let you know.
ThinkPad T23, 2647 HU8, Based on 2647-8RU: PIII-M 1.20GHz (512KB), 512MB RAM, 40.0GB HDD, 14.1 XGA(1024x768) TFT LCD, 8x8x24x/8x CDRW/DVD, Modem(MPCI), Ethernet(CDC), WinXP Home, Linksys Wireless B adapter. -
GDM loaded and active, but not showing login-screen.
Hello Archers!
At the very beginning I would like to say "Hello" to all forum users!
I recently started using Arch Linux, after moving from Win8.1 to Ubuntu and then to Arch. I've went through a struggle of installing proprietary AMD graphic card drivers and finally managed to get it working. Although that was achieved with a little sacrifice - GDM stopped working. I can still run Gnome with "startx", but I can't get login-screen to work. Any ideas what happened and how to get it working?
I'm using xorg115 and proprietary AMD graphic drivers.
Output of
systemctl status gdm
● gdm.service - GNOME Display Manager
Loaded: loaded (/usr/lib/systemd/system/gdm.service; enabled)
Active: active (running) since pon 2014-10-20 20:37:45 CEST; 1min 8s ago
Main PID: 277 (gdm)
CGroup: /system.slice/gdm.service
└─277 /usr/bin/gdm
paź 20 20:37:46 ASRock-P67-Pro3 gdm[277]: GLib-GObject: invalid unclassed pointer in cast to 'GdmSimpleSlave'
paź 20 20:37:46 ASRock-P67-Pro3 gdm[277]: Child process 313 was already dead.
paź 20 20:37:46 ASRock-P67-Pro3 gdm[277]: GdmDisplay: display lasted 0,057605 seconds
paź 20 20:37:46 ASRock-P67-Pro3 gdm[277]: GdmLocalDisplayFactory: maximum number of X display failures reached: check X server log for errors
paź 20 20:37:48 ASRock-P67-Pro3 systemd-coredump[306]: Process 303 (Xorg) of user 0 dumped core.
paź 20 20:37:48 ASRock-P67-Pro3 systemd-coredump[308]: Process 307 (Xorg) of user 0 dumped core.
paź 20 20:37:48 ASRock-P67-Pro3 systemd-coredump[312]: Process 311 (Xorg) of user 0 dumped core.
paź 20 20:37:48 ASRock-P67-Pro3 systemd-coredump[310]: Process 309 (Xorg) of user 0 dumped core.
paź 20 20:37:48 ASRock-P67-Pro3 systemd-coredump[300]: Process 282 (Xorg) of user 0 dumped core.
paź 20 20:37:48 ASRock-P67-Pro3 systemd-coredump[314]: Process 313 (Xorg) of user 0 dumped core.Here you go!
grep (EE) /var/log/Xorg.0.log
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 21.204] (EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
And full log here
[ 20.732]
X.Org X Server 1.15.2
Release Date: 2014-06-27
[ 20.733] X Protocol Version 11, Revision 0
[ 20.733] Build Operating System: Linux 3.15.1-1-ARCH x86_64
[ 20.733] Current Operating System: Linux ASRock-P67-Pro3 3.16.4-1-ARCH #1 SMP PREEMPT Mon Oct 6 08:22:27 CEST 2014 x86_64
[ 20.733] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda1 rw nomodeset initrd=../initramfs-linux.img
[ 20.733] Build Date: 27 June 2014 07:32:26PM
[ 20.733]
[ 20.733] Current version of pixman: 0.32.6
[ 20.734] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 20.734] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 20.735] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Oct 21 07:58:46 2014
[ 20.735] (==) Using config file: "/etc/X11/xorg.conf"
[ 20.735] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 20.735] (==) ServerLayout "aticonfig Layout"
[ 20.735] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 20.735] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 20.735] (**) | |-->Device "aticonfig-Device[0]-0"
[ 20.735] (==) Automatically adding devices
[ 20.735] (==) Automatically enabling devices
[ 20.735] (==) Automatically adding GPU devices
[ 20.735] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 20.735] Entry deleted from font path.
[ 20.735] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 20.735] Entry deleted from font path.
[ 20.735] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 20.735] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 20.735] Entry deleted from font path.
[ 20.735] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 20.735] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 20.735] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 20.735] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 20.735] (II) Loader magic: 0x811cc0
[ 20.735] (II) Module ABI versions:
[ 20.735] X.Org ANSI C Emulation: 0.4
[ 20.735] X.Org Video Driver: 15.0
[ 20.735] X.Org XInput driver : 20.0
[ 20.735] X.Org Server Extension : 8.0
[ 20.737] (--) PCI:*(0:1:0:0) 1002:6818:174b:e217 rev 0, Mem @ 0xe0000000/268435456, 0xf7e00000/262144, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[ 20.737] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 20.737] Initializing built-in extension Generic Event Extension
[ 20.737] Initializing built-in extension SHAPE
[ 20.737] Initializing built-in extension MIT-SHM
[ 20.737] Initializing built-in extension XInputExtension
[ 20.737] Initializing built-in extension XTEST
[ 20.737] Initializing built-in extension BIG-REQUESTS
[ 20.737] Initializing built-in extension SYNC
[ 20.737] Initializing built-in extension XKEYBOARD
[ 20.738] Initializing built-in extension XC-MISC
[ 20.738] Initializing built-in extension SECURITY
[ 20.738] Initializing built-in extension XINERAMA
[ 20.738] Initializing built-in extension XFIXES
[ 20.738] Initializing built-in extension RENDER
[ 20.738] Initializing built-in extension RANDR
[ 20.738] Initializing built-in extension COMPOSITE
[ 20.738] Initializing built-in extension DAMAGE
[ 20.738] Initializing built-in extension MIT-SCREEN-SAVER
[ 20.738] Initializing built-in extension DOUBLE-BUFFER
[ 20.739] Initializing built-in extension RECORD
[ 20.739] Initializing built-in extension DPMS
[ 20.739] Initializing built-in extension Present
[ 20.739] Initializing built-in extension DRI3
[ 20.739] Initializing built-in extension X-Resource
[ 20.739] Initializing built-in extension XVideo
[ 20.739] Initializing built-in extension XVideo-MotionCompensation
[ 20.739] Initializing built-in extension XFree86-VidModeExtension
[ 20.739] Initializing built-in extension XFree86-DGA
[ 20.739] Initializing built-in extension XFree86-DRI
[ 20.740] Initializing built-in extension DRI2
[ 20.740] (II) "glx" will be loaded by default.
[ 20.740] (II) LoadModule: "glx"
[ 20.740] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 20.740] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 20.740] compiled for 6.9.0, module version = 1.0.0
[ 20.740] Loading extension GLX
[ 20.740] (II) LoadModule: "fglrx"
[ 20.740] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 20.757] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 20.757] compiled for 1.4.99.906, module version = 14.30.4
[ 20.757] Module class: X.Org Video Driver
[ 20.757] (II) Loading sub module "fglrxdrm"
[ 20.757] (II) LoadModule: "fglrxdrm"
[ 20.758] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 20.760] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 20.760] compiled for 1.4.99.906, module version = 14.30.4
[ 20.760] (II) AMD Proprietary Linux Driver Version Identifier:14.30.4
[ 20.760] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-14.301.1001
[ 20.760] (II) AMD Proprietary Linux Driver Build Date: Sep 15 2014 18:11:36
[ 20.760] (++) using VT number 2
[ 20.762] (WW) Falling back to old probe method for fglrx
[ 20.775] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 20.776] ukiDynamicMajor: found major device number 250
[ 20.776] ukiDynamicMajor: found major device number 250
[ 20.777] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 20.777] ukiOpenDevice: node name is /dev/ati/card0
[ 20.777] ukiOpenDevice: open result is 9, (OK)
[ 20.853] ukiOpenByBusid: ukiOpenMinor returns 9
[ 20.853] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 20.855] (--) Chipset Supported AMD Graphics Processor (0x6818) found
[ 20.856] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 20.856] (II) fglrx(0): pEnt->device->identifier=0x22ec7f0
[ 20.856] (II) fglrx(0): === [xdl_xs115_atiddxPreInit] === begin
[ 20.856] (II) fglrx(0): FB driver is not enabled
[ 20.856] (II) Loading sub module "vgahw"
[ 20.856] (II) LoadModule: "vgahw"
[ 20.857] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 20.857] (II) Module vgahw: vendor="X.Org Foundation"
[ 20.857] compiled for 1.15.2, module version = 0.1.0
[ 20.857] ABI class: X.Org Video Driver, version 15.0
[ 20.858] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 20.858] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 20.858] (==) fglrx(0): Default visual is TrueColor
[ 20.858] (**) fglrx(0): Option "DPMS" "true"
[ 20.858] (==) fglrx(0): RGB weight 888
[ 20.858] (II) fglrx(0): Using 8 bits per RGB
[ 20.858] (==) fglrx(0): Buffer Tiling is ON
[ 20.858] (II) Loading sub module "fglrxdrm"
[ 20.858] (II) LoadModule: "fglrxdrm"
[ 20.858] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 20.858] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 20.858] compiled for 1.4.99.906, module version = 14.30.4
[ 20.859] ukiDynamicMajor: found major device number 250
[ 20.859] ukiDynamicMajor: found major device number 250
[ 20.859] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 20.859] ukiOpenDevice: node name is /dev/ati/card0
[ 20.859] ukiOpenDevice: open result is 11, (OK)
[ 20.859] ukiOpenByBusid: ukiOpenMinor returns 11
[ 20.859] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 20.859] (**) fglrx(0): NoAccel = NO
[ 20.859] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 20.859] (--) fglrx(0): Chipset: "AMD Radeon HD 7800 Series" (Chipset = 0x6818)
[ 20.859] (--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0xe217)
[ 20.859] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 20.859] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
[ 20.859] (--) fglrx(0): MMIO registers at 0xf7e00000
[ 20.859] (--) fglrx(0): I/O port at 0x0000e000
[ 20.859] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 20.860] (II) fglrx(0): AC Adapter is used
[ 20.861] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 20.939] (II) Loading sub module "vbe"
[ 20.939] (II) LoadModule: "vbe"
[ 20.939] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 20.940] (II) Module vbe: vendor="X.Org Foundation"
[ 20.940] compiled for 1.15.2, module version = 1.1.0
[ 20.940] ABI class: X.Org Video Driver, version 15.0
[ 20.940] (II) fglrx(0): VESA BIOS detected
[ 20.940] (II) fglrx(0): VESA VBE Version 3.0
[ 20.940] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 20.940] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
[ 20.940] (II) fglrx(0): VESA VBE OEM Software Rev: 15.17
[ 20.940] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, Advanced Micro Devices, Inc.
[ 20.940] (II) fglrx(0): VESA VBE OEM Product: PITCAIRN
[ 20.940] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 20.940] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 20.940] (--) fglrx(0): Video RAM: 2097152 kByte, Type: GDDR5
[ 20.940] (II) fglrx(0): PCIE card detected
[ 20.940] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 20.940] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 20.940] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf400000000, MCFBSize = 0x80000000)
[ 20.940] (II) fglrx(0): RandR 1.2 support is enabled!
[ 20.940] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 20.940] (II) Loading sub module "fb"
[ 20.940] (II) LoadModule: "fb"
[ 20.941] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 20.942] (II) Module fb: vendor="X.Org Foundation"
[ 20.942] compiled for 1.15.2, module version = 1.0.0
[ 20.942] ABI class: X.Org ANSI C Emulation, version 0.4
[ 20.942] (II) fglrx(0): EDID Management option: EDID Management is enabled
[ 20.942] (II) Loading sub module "ddc"
[ 20.942] (II) LoadModule: "ddc"
[ 20.942] (II) Module "ddc" already built-in
[ 21.049] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
[ 21.049] (II) fglrx(0): Output DFP2 has no monitor section
[ 21.049] (II) fglrx(0): Output DFP3 has no monitor section
[ 21.049] (II) fglrx(0): Output DFP4 has no monitor section
[ 21.049] (II) fglrx(0): Output DFP5 has no monitor section
[ 21.049] (II) fglrx(0): Output DFP6 has no monitor section
[ 21.049] (II) fglrx(0): Output DFP7 has no monitor section
[ 21.049] (II) fglrx(0): Output DFP8 has no monitor section
[ 21.049] (II) fglrx(0): Output DFP9 has no monitor section
[ 21.049] (II) fglrx(0): Output DFP10 has no monitor section
[ 21.049] (II) fglrx(0): Output CRT1 has no monitor section
[ 21.049] (II) Loading sub module "ddc"
[ 21.049] (II) LoadModule: "ddc"
[ 21.049] (II) Module "ddc" already built-in
[ 21.050] (II) fglrx(0): Connected Display0: CRT1
[ 21.050] (II) fglrx(0): Display0 EDID data ---------------------------
[ 21.050] (II) fglrx(0): Manufacturer: NEC Model: 6733 Serial#: 16843009
[ 21.050] (II) fglrx(0): Year: 2008 Week: 36
[ 21.050] (II) fglrx(0): EDID Version: 1.3
[ 21.050] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 21.050] (II) fglrx(0): Sync: Separate
[ 21.050] (II) fglrx(0): Max Image Size [cm]: horiz.: 47 vert.: 30
[ 21.050] (II) fglrx(0): Gamma: 2.20
[ 21.050] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 21.050] (II) fglrx(0): First detailed timing is preferred mode
[ 21.050] (II) fglrx(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 21.050] (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 21.050] (II) fglrx(0): Supported established timings:
[ 21.050] (II) fglrx(0): 720x400@70Hz
[ 21.050] (II) fglrx(0): 640x480@60Hz
[ 21.050] (II) fglrx(0): 640x480@67Hz
[ 21.050] (II) fglrx(0): 640x480@72Hz
[ 21.050] (II) fglrx(0): 640x480@75Hz
[ 21.050] (II) fglrx(0): 800x600@56Hz
[ 21.050] (II) fglrx(0): 800x600@60Hz
[ 21.050] (II) fglrx(0): 800x600@72Hz
[ 21.050] (II) fglrx(0): 800x600@75Hz
[ 21.050] (II) fglrx(0): 832x624@75Hz
[ 21.050] (II) fglrx(0): 1024x768@60Hz
[ 21.050] (II) fglrx(0): 1024x768@70Hz
[ 21.050] (II) fglrx(0): 1024x768@75Hz
[ 21.050] (II) fglrx(0): 1280x1024@75Hz
[ 21.050] (II) fglrx(0): 1152x864@75Hz
[ 21.050] (II) fglrx(0): Manufacturer's mask: 0
[ 21.050] (II) fglrx(0): Supported standard timings:
[ 21.050] (II) fglrx(0): #0: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 21.050] (II) fglrx(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 21.050] (II) fglrx(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 21.050] (II) fglrx(0): #3: hsize: 1360 vsize 765 refresh: 60 vid: 49291
[ 21.050] (II) fglrx(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 21.050] (II) fglrx(0): #5: hsize: 1400 vsize 1050 refresh: 60 vid: 16528
[ 21.050] (II) fglrx(0): #6: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 21.050] (II) fglrx(0): #7: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 21.050] (II) fglrx(0): Supported detailed timing:
[ 21.050] (II) fglrx(0): clock: 146.2 MHz Image Size: 474 x 296 mm
[ 21.050] (II) fglrx(0): h_active: 1680 h_sync: 1960 h_sync_end 2136 h_blank_end 2240 h_border: 0
[ 21.050] (II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
[ 21.050] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 83 kHz, PixClock max 175 MHz
[ 21.050] (II) fglrx(0): Monitor name: LCD224WM
[ 21.050] (II) fglrx(0): Serial No: 89104229TB
[ 21.050] (II) fglrx(0): EDID (in hex):
[ 21.050] (II) fglrx(0): 00ffffffffffff0038a3336701010101
[ 21.050] (II) fglrx(0): 24120103082f1e78eaee95a3544c9926
[ 21.050] (II) fglrx(0): 0f5054bfef8081c0814081808bc09500
[ 21.050] (II) fglrx(0): 9040b300714f21399030621a274018b0
[ 21.050] (II) fglrx(0): 3640da281100001c000000fd00384b1f
[ 21.050] (II) fglrx(0): 5311000a202020202020000000fc004c
[ 21.050] (II) fglrx(0): 4344323234574d0a20202020000000ff
[ 21.050] (II) fglrx(0): 00383931303432323954420a202000c2
[ 21.050] (II) fglrx(0): End of Display0 EDID data --------------------
[ 21.050] (II) fglrx(0): Dynamic Surface Resizing Enabled
[ 21.050] (II) fglrx(0): EDID for output DFP1
[ 21.050] (II) fglrx(0): EDID for output DFP2
[ 21.050] (II) fglrx(0): EDID for output DFP3
[ 21.050] (II) fglrx(0): EDID for output DFP4
[ 21.050] (II) fglrx(0): EDID for output DFP5
[ 21.050] (II) fglrx(0): EDID for output DFP6
[ 21.050] (II) fglrx(0): EDID for output DFP7
[ 21.050] (II) fglrx(0): EDID for output DFP8
[ 21.050] (II) fglrx(0): EDID for output DFP9
[ 21.050] (II) fglrx(0): EDID for output DFP10
[ 21.050] (II) fglrx(0): EDID for output CRT1
[ 21.050] (II) fglrx(0): Manufacturer: NEC Model: 6733 Serial#: 16843009
[ 21.050] (II) fglrx(0): Year: 2008 Week: 36
[ 21.050] (II) fglrx(0): EDID Version: 1.3
[ 21.050] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 21.050] (II) fglrx(0): Sync: Separate
[ 21.050] (II) fglrx(0): Max Image Size [cm]: horiz.: 47 vert.: 30
[ 21.050] (II) fglrx(0): Gamma: 2.20
[ 21.050] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 21.050] (II) fglrx(0): First detailed timing is preferred mode
[ 21.050] (II) fglrx(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 21.050] (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 21.050] (II) fglrx(0): Supported established timings:
[ 21.050] (II) fglrx(0): 720x400@70Hz
[ 21.050] (II) fglrx(0): 640x480@60Hz
[ 21.050] (II) fglrx(0): 640x480@67Hz
[ 21.050] (II) fglrx(0): 640x480@72Hz
[ 21.050] (II) fglrx(0): 640x480@75Hz
[ 21.050] (II) fglrx(0): 800x600@56Hz
[ 21.050] (II) fglrx(0): 800x600@60Hz
[ 21.050] (II) fglrx(0): 800x600@72Hz
[ 21.050] (II) fglrx(0): 800x600@75Hz
[ 21.050] (II) fglrx(0): 832x624@75Hz
[ 21.050] (II) fglrx(0): 1024x768@60Hz
[ 21.050] (II) fglrx(0): 1024x768@70Hz
[ 21.050] (II) fglrx(0): 1024x768@75Hz
[ 21.050] (II) fglrx(0): 1280x1024@75Hz
[ 21.050] (II) fglrx(0): 1152x864@75Hz
[ 21.050] (II) fglrx(0): Manufacturer's mask: 0
[ 21.050] (II) fglrx(0): Supported standard timings:
[ 21.050] (II) fglrx(0): #0: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 21.050] (II) fglrx(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 21.050] (II) fglrx(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 21.050] (II) fglrx(0): #3: hsize: 1360 vsize 765 refresh: 60 vid: 49291
[ 21.050] (II) fglrx(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 21.050] (II) fglrx(0): #5: hsize: 1400 vsize 1050 refresh: 60 vid: 16528
[ 21.050] (II) fglrx(0): #6: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 21.050] (II) fglrx(0): #7: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 21.050] (II) fglrx(0): Supported detailed timing:
[ 21.050] (II) fglrx(0): clock: 146.2 MHz Image Size: 474 x 296 mm
[ 21.050] (II) fglrx(0): h_active: 1680 h_sync: 1960 h_sync_end 2136 h_blank_end 2240 h_border: 0
[ 21.050] (II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
[ 21.050] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 83 kHz, PixClock max 175 MHz
[ 21.050] (II) fglrx(0): Monitor name: LCD224WM
[ 21.050] (II) fglrx(0): Serial No: 89104229TB
[ 21.050] (II) fglrx(0): EDID (in hex):
[ 21.050] (II) fglrx(0): 00ffffffffffff0038a3336701010101
[ 21.050] (II) fglrx(0): 24120103082f1e78eaee95a3544c9926
[ 21.050] (II) fglrx(0): 0f5054bfef8081c0814081808bc09500
[ 21.050] (II) fglrx(0): 9040b300714f21399030621a274018b0
[ 21.050] (II) fglrx(0): 3640da281100001c000000fd00384b1f
[ 21.050] (II) fglrx(0): 5311000a202020202020000000fc004c
[ 21.050] (II) fglrx(0): 4344323234574d0a20202020000000ff
[ 21.050] (II) fglrx(0): 00383931303432323954420a202000c2
[ 21.050] (II) fglrx(0): Printing probed modes for output CRT1
[ 21.051] (II) fglrx(0): Modeline "1680x1050"x60.0 146.25 1680 1960 2136 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz eP)
[ 21.051] (II) fglrx(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 21.051] (II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 21.051] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 21.051] (II) fglrx(0): Modeline "1440x900"x60.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 21.051] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 21.051] (II) fglrx(0): Modeline "1280x800"x60.0 108.00 1280 1376 1488 1800 800 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 21.051] (II) fglrx(0): Modeline "1152x864"x60.0 146.25 1152 1960 2136 2240 864 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 21.051] (II) fglrx(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 21.051] (II) fglrx(0): Modeline "1280x768"x60.0 108.00 1280 1376 1488 1800 768 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 21.051] (II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 21.051] (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 21.051] (II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 21.051] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 21.051] (II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 21.051] (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 21.051] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 21.051] (II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 21.051] (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 21.051] (II) fglrx(0): Modeline "640x480"x72.0 31.50 640 656 696 832 480 481 484 520 -hsync -vsync (37.9 kHz e)
[ 21.051] (II) fglrx(0): Modeline "640x480"x67.0 27.28 640 664 728 816 480 481 484 499 -hsync +vsync (33.4 kHz e)
[ 21.051] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 21.051] (II) fglrx(0): Output DFP1 disconnected
[ 21.051] (II) fglrx(0): Output DFP2 disconnected
[ 21.051] (II) fglrx(0): Output DFP3 disconnected
[ 21.051] (II) fglrx(0): Output DFP4 disconnected
[ 21.051] (II) fglrx(0): Output DFP5 disconnected
[ 21.051] (II) fglrx(0): Output DFP6 disconnected
[ 21.051] (II) fglrx(0): Output DFP7 disconnected
[ 21.051] (II) fglrx(0): Output DFP8 disconnected
[ 21.051] (II) fglrx(0): Output DFP9 disconnected
[ 21.051] (II) fglrx(0): Output DFP10 disconnected
[ 21.051] (II) fglrx(0): Output CRT1 connected
[ 21.051] (II) fglrx(0): Using exact sizes for initial modes
[ 21.051] (II) fglrx(0): Output CRT1 using initial mode 1680x1050
[ 21.051] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 21.051] (II) fglrx(0): DPI set to (96, 96)
[ 21.051] (II) fglrx(0): Eyefinity capable adapter detected.
[ 21.051] (II) fglrx(0): Adapter AMD Radeon HD 7800 Series has 6 configurable heads and 1 displays connected.
[ 21.051] (==) fglrx(0): PseudoColor visuals disabled
[ 21.051] (II) Loading sub module "ramdac"
[ 21.051] (II) LoadModule: "ramdac"
[ 21.051] (II) Module "ramdac" already built-in
[ 21.051] (==) fglrx(0): NoDRI = NO
[ 21.051] (==) fglrx(0): Capabilities: 0x00000000
[ 21.051] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 21.051] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 21.051] (==) fglrx(0): UseFastTLS=0
[ 21.051] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[ 21.051] (--) Depth 24 pixmap format is 32 bpp
[ 21.051] Loading extension ATIFGLRXDRI
[ 21.051] (II) fglrx(0): doing swlDriScreenInit
[ 21.051] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 21.051] ukiDynamicMajor: found major device number 250
[ 21.051] ukiDynamicMajor: found major device number 250
[ 21.051] ukiDynamicMajor: found major device number 250
[ 21.051] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 21.051] ukiOpenDevice: node name is /dev/ati/card0
[ 21.051] ukiOpenDevice: open result is 12, (OK)
[ 21.051] ukiOpenByBusid: ukiOpenMinor returns 12
[ 21.051] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 21.051] (II) fglrx(0): [uki] DRM interface version 1.0
[ 21.051] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 21.051] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 21.051] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7facb602b000
[ 21.051] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 21.051] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 21.051] (II) fglrx(0): swlDriScreenInit done
[ 21.051] (II) fglrx(0): Kernel Module Version Information:
[ 21.051] (II) fglrx(0): Name: fglrx
[ 21.051] (II) fglrx(0): Version: 14.30.4
[ 21.051] (II) fglrx(0): Date: Sep 15 2014
[ 21.051] (II) fglrx(0): Desc: AMD FireGL DRM kernel module
[ 21.051] (II) fglrx(0): Kernel Module version matches driver.
[ 21.051] (II) fglrx(0): Kernel Module Build Time Information:
[ 21.051] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.16.4-1-ARCH
[ 21.051] (II) fglrx(0): Build-Kernel MODVERSIONS: yes
[ 21.051] (II) fglrx(0): Build-Kernel __SMP__: yes
[ 21.051] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 21.051] (II) fglrx(0): [uki] register handle = 0x00004000
[ 21.053] (II) fglrx(0): Display width adjusted to to 1792 due to alignment constraints
[ 21.053] (II) fglrx(0): DRI initialization successfull
[ 21.054] (II) fglrx(0): FBADPhys: 0xf400000000 FBMappedSize: 0x010a0000
[ 21.056] (==) fglrx(0): Backing store enabled
[ 21.056] Loading extension FGLRXEXTENSION
[ 21.056] (**) fglrx(0): DPMS enabled
[ 21.056] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 21.056] (**) fglrx(0): Textured Video is enabled.
[ 21.056] (II) LoadModule: "glesx"
[ 21.056] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 21.069] (II) Module glesx: vendor="X.Org Foundation"
[ 21.070] compiled for 1.4.99.906, module version = 1.0.0
[ 21.070] Loading extension GLESX
[ 21.070] (II) fglrx(0): GLESX enableFlags = 8784
[ 21.070] (II) fglrx(0): GLESX is enabled
[ 21.070] (II) LoadModule: "amdxmm"
[ 21.070] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 21.072] (II) Module amdxmm: vendor="X.Org Foundation"
[ 21.072] compiled for 1.4.99.906, module version = 2.0.0
[ 21.082] Loading extension AMDXVOPL
[ 21.082] Loading extension AMDXVBA
[ 21.083] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 21.084] (II) fglrx(0): Enable composite support successfully
[ 21.084] (WW) fglrx(0): Option "VendorName" is not used
[ 21.084] (WW) fglrx(0): Option "ModelName" is not used
[ 21.084] (II) fglrx(0): X context handle = 0x1
[ 21.084] (II) fglrx(0): [DRI] installation complete
[ 21.084] (==) fglrx(0): Silken mouse enabled
[ 21.085] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 21.085] (II) fglrx(0): LPT is disabled by configure option
[ 21.085] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 21.199] (--) RandR disabled
[ 21.202] ukiDynamicMajor: found major device number 250
[ 21.202] ukiDynamicMajor: found major device number 250
[ 21.202] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 21.202] ukiOpenDevice: node name is /dev/ati/card0
[ 21.202] ukiOpenDevice: open result is 13, (OK)
[ 21.202] ukiOpenByBusid: ukiOpenMinor returns 13
[ 21.202] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 21.204] (EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
[ 21.235] ukiDynamicMajor: found major device number 250
[ 21.235] ukiDynamicMajor: found major device number 250
[ 21.235] ukiDynamicMajor: found major device number 250
[ 21.235] ukiOpenDevice: node name is /dev/ati/card0
[ 21.235] ukiOpenDevice: open result is 14, (OK)
[ 21.235] ukiGetBusid returned 'PCI:1:0:0'
[ 21.235] ukiOpenDevice: node name is /dev/ati/card1
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: Open failed
[ 21.235] ukiOpenDevice: node name is /dev/ati/card2
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: Open failed
[ 21.235] ukiOpenDevice: node name is /dev/ati/card3
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: Open failed
[ 21.235] ukiOpenDevice: node name is /dev/ati/card4
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: Open failed
[ 21.235] ukiOpenDevice: node name is /dev/ati/card5
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: Open failed
[ 21.235] ukiOpenDevice: node name is /dev/ati/card6
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: Open failed
[ 21.235] ukiOpenDevice: node name is /dev/ati/card7
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: Open failed
[ 21.235] ukiOpenDevice: node name is /dev/ati/card8
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: Open failed
[ 21.235] ukiOpenDevice: node name is /dev/ati/card9
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: Open failed
[ 21.235] ukiOpenDevice: node name is /dev/ati/card10
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: Open failed
[ 21.235] ukiOpenDevice: node name is /dev/ati/card11
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: Open failed
[ 21.235] ukiOpenDevice: node name is /dev/ati/card12
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: Open failed
[ 21.235] ukiOpenDevice: node name is /dev/ati/card13
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: Open failed
[ 21.235] ukiOpenDevice: node name is /dev/ati/card14
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: Open failed
[ 21.235] ukiOpenDevice: node name is /dev/ati/card15
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: open result is -1, (No such device)
[ 21.235] ukiOpenDevice: Open failed
[ 21.235] ukiDynamicMajor: found major device number 250
[ 21.235] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 21.235] ukiOpenDevice: node name is /dev/ati/card0
[ 21.235] ukiOpenDevice: open result is 14, (OK)
[ 21.235] ukiOpenByBusid: ukiOpenMinor returns 14
[ 21.235] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 21.330] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 21.331] ukiDynamicMajor: found major device number 250
[ 21.331] ukiDynamicMajor: found major device number 250
[ 21.331] ukiDynamicMajor: found major device number 250
[ 21.331] ukiOpenDevice: node name is /dev/ati/card0
[ 21.331] ukiOpenDevice: open result is 15, (OK)
[ 21.331] ukiGetBusid returned 'PCI:1:0:0'
[ 21.331] ukiOpenDevice: node name is /dev/ati/card1
[ 21.331] ukiOpenDevice: open result is -1, (No such device)
[ 21.331] ukiOpenDevice: open result is -1, (No such device)
[ 21.331] ukiOpenDevice: Open failed
[ 21.331] ukiOpenDevice: node name is /dev/ati/card2
[ 21.331] ukiOpenDevice: open result is -1, (No such device)
[ 21.331] ukiOpenDevice: open result is -1, (No such device)
[ 21.331] ukiOpenDevice: Open failed
[ 21.331] ukiOpenDevice: node name is /dev/ati/card3
[ 21.331] ukiOpenDevice: open result is -1, (No such device)
[ 21.331] ukiOpenDevice: open result is -1, (No such device)
[ 21.331] ukiOpenDevice: Open failed
[ 21.331] ukiOpenDevice: node name is /dev/ati/card4
[ 21.331] ukiOpenDevice: open result is -1, (No such device)
[ 21.331] ukiOpenDevice: open result is -1, (No such device)
[ 21.331] ukiOpenDevice: Open failed
[ 21.331] ukiOpenDevice: node name is /dev/ati/card5
[ 21.331] ukiOpenDevice: open result is -1, (No such device)
[ 21.331] ukiOpenDevice: open result is -1, (No such device)
[ 21.331] ukiOpenDevice: Open failed
[ 21.331] ukiOpenDevice: node name is /dev/ati/card6
[ 21.331] ukiOpenDevice: open result is -1, (No such device)
[ 21.331] ukiOpenDevice: open result is -1, (No such device)
[ 21.331] ukiOpenDevice: Open failed
[ 21.331] ukiOpenDevice: node name is /dev/ati/card7
[ 21.331] ukiOpenDevice: open result is -1, (No such device)
[ 21.331] ukiOpenDevice: open result is -1, (No such device)
[ 21.331] ukiOpenDevice: Open failed
[ 21.331] ukiOpenDevice: node name is /dev/ati/card8
[ 21.331] ukiOpenDevice: open result is -1, (No such device)
[ 21.332] ukiOpenDevice: open result is -1, (No such device)
[ 21.332] ukiOpenDevice: Open failed
[ 21.332] ukiOpenDevice: node name is /dev/ati/card9
[ 21.332] ukiOpenDevice: open result is -1, (No such device)
[ 21.332] ukiOpenDevice: open result is -1, (No such device)
[ 21.332] ukiOpenDevice: Open failed
[ 21.332] ukiOpenDevice: node name is /dev/ati/card10
[ 21.332] ukiOpenDevice: open result is -1, (No such device)
[ 21.332] ukiOpenDevice: open result is -1, (No such device)
[ 21.332] ukiOpenDevice: Open failed
[ 21.332] ukiOpenDevice: node name is /dev/ati/card11
[ 21.332] ukiOpenDevice: open result is -1, (No such device)
[ 21.332] ukiOpenDevice: open result is -1, (No such device)
[ 21.332] ukiOpenDevice: Open failed
[ 21.332] ukiOpenDevice: node name is /dev/ati/card12
[ 21.332] ukiOpenDevice: open result is -1, (No such device)
[ 21.332] ukiOpenDevice: open result is -1, (No such device)
[ 21.332] ukiOpenDevice: Open failed
[ 21.332] ukiOpenDevice: node name is /dev/ati/card13
[ 21.332] ukiOpenDevice: open result is -1, (No such device)
[ 21.332] ukiOpenDevice: open result is -1, (No such device)
[ 21.332] ukiOpenDevice: Open failed
[ 21.332] ukiOpenDevice: node name is /dev/ati/card14
[ 21.332] ukiOpenDevice: open result is -1, (No such device)
[ 21.332] ukiOpenDevice: open result is -1, (No such device)
[ 21.332] ukiOpenDevice: Open failed
[ 21.332] ukiOpenDevice: node name is /dev/ati/card15
[ 21.332] ukiOpenDevice: open result is -1, (No such device)
[ 21.332] ukiOpenDevice: open result is -1, (No such device)
[ 21.332] ukiOpenDevice: Open failed
[ 21.332] ukiDynamicMajor: found major device number 250
[ 21.332] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 21.332] ukiOpenDevice: node name is /dev/ati/card0
[ 21.332] ukiOpenDevice: open result is 15, (OK)
[ 21.332] ukiOpenByBusid: ukiOpenMinor returns 15
[ 21.332] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 21.360] (II) fglrx(0): OverDrive5 Detected!
[ 21.362] (II) fglrx(0): Setting screen physical size to 444 x 277
[ 21.420] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 21.420] (**) Power Button: Applying InputClass "system-keyboard"
[ 21.420] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 21.420] (II) LoadModule: "evdev"
[ 21.421] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 21.423] (II) Module evdev: vendor="X.Org Foundation"
[ 21.423] compiled for 1.15.1, module version = 2.9.0
[ 21.423] Module class: X.Org XInput Driver
[ 21.423] ABI class: X.Org XInput driver, version 20.0
[ 21.423] (II) Using input driver 'evdev' for 'Power Button'
[ 21.423] (**) Power Button: always reports core events
[ 21.423] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 21.423] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 21.423] (--) evdev: Power Button: Found keys
[ 21.423] (II) evdev: Power Button: Configuring as keyboard
[ 21.423] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event5"
[ 21.423] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 21.423] (**) Option "xkb_rules" "evdev"
[ 21.423] (**) Option "xkb_model" "pc104"
[ 21.423] (**) Option "xkb_layout" "pl"
[ 21.447] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 21.447] (**) Power Button: Applying InputClass "system-keyboard"
[ 21.447] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 21.447] (II) Using input driver 'evdev' for 'Power Button'
[ 21.447] (**) Power Button: always reports core events
[ 21.447] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 21.447] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 21.447] (--) evdev: Power Button: Found keys
[ 21.447] (II) evdev: Power Button: Configuring as keyboard
[ 21.447] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6/event4"
[ 21.447] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 21.447] (**) Option "xkb_rules" "evdev"
[ 21.447] (**) Option "xkb_model" "pc104"
[ 21.447] (**) Option "xkb_layout" "pl"
[ 21.448] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event8)
[ 21.448] (II) No input driver specified, ignoring this device.
[ 21.448] (II) This device may have been added with another device file.
[ 21.448] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event9)
[ 21.448] (II) No input driver specified, ignoring this device.
[ 21.448] (II) This device may have been added with another device file.
[ 21.448] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event10)
[ 21.448] (II) No input driver specified, ignoring this device.
[ 21.448] (II) This device may have been added with another device file.
[ 21.448] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10 (/dev/input/event11)
[ 21.448] (II) No input driver specified, ignoring this device.
[ 21.448] (II) This device may have been added with another device file.
[ 21.449] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=11 (/dev/input/event12)
[ 21.449] (II) No input driver specified, ignoring this device.
[ 21.449] (II) This device may have been added with another device file.
[ 21.449] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event7)
[ 21.449] (II) No input driver specified, ignoring this device.
[ 21.449] (II) This device may have been added with another device file.
[ 21.449] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event13)
[ 21.449] (II) No input driver specified, ignoring this device.
[ 21.449] (II) This device may have been added with another device file.
[ 21.449] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event14)
[ 21.449] (II) No input driver specified, ignoring this device.
[ 21.449] (II) This device may have been added with another device file.
[ 21.449] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event15)
[ 21.449] (II) No input driver specified, ignoring this device.
[ 21.449] (II) This device may have been added with another device file.
[ 21.450] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event16)
[ 21.450] (II) No input driver specified, ignoring this device.
[ 21.450] (II) This device may have been added with another device file.
[ 21.450] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event17)
[ 21.450] (II) No input driver specified, ignoring this device.
[ 21.450] (II) This device may have been added with another device file.
[ 21.450] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event18)
[ 21.450] (II) No input driver specified, ignoring this device.
[ 21.450] (II) This device may have been added with another device file.
[ 21.450] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event19)
[ 21.450] (II) No input driver specified, ignoring this device.
[ 21.450] (II) This device may have been added with another device file.
[ 21.450] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event20)
[ 21.450] (II) No input driver specified, ignoring this device.
[ 21.450] (II) This device may have been added with another device file.
[ 21.451] (II) config/udev: Adding input device Logitech Gaming Mouse G502 (/dev/input/event0)
[ 21.451] (**) Logitech Gaming Mouse G502: Applying InputClass "evdev pointer catchall"
[ 21.451] (II) Using input driver 'evdev' for 'Logitech Gaming Mouse G502'
[ 21.451] (**) Logitech Gaming Mouse G502: always reports core events
[ 21.451] (**) evdev: Logitech Gaming Mouse G502: Device: "/dev/input/event0"
[ 21.451] (--) evdev: Logitech Gaming Mouse G502: Vendor 0x46d Product 0xc07d
[ 21.451] (--) evdev: Logitech Gaming Mouse G502: Found 20 mouse buttons
[ 21.451] (--) evdev: Logitech Gaming Mouse G502: Found scroll wheel(s)
[ 21.451] (--) evdev: Logitech Gaming Mouse G502: Found relative axes
[ 21.451] (--) evdev: Logitech Gaming Mouse G502: Found x and y relative axes
[ 21.451] (II) evdev: Logitech Gaming Mouse G502: Configuring as mouse
[ 21.451] (II) evdev: Logitech Gaming Mouse G502: Adding scrollwheel support
[ 21.451] (**) evdev: Logitech Gaming Mouse G502: YAxisMapping: buttons 4 and 5
[ 21.451] (**) evdev: Logitech Gaming Mouse G502: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 21.451] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.0/0003:046D:C07D.0001/input/input2/event0"
[ 21.451] (II) XINPUT: Adding extended input device "Logitech Gaming Mouse G502" (type: MOUSE, id 8)
[ 21.451] (II) evdev: Logitech Gaming Mouse G502: initialized for relative axes.
[ 21.451] (**) Logitech Gaming Mouse G502: (accel) keeping acceleration scheme 1
[ 21.451] (**) Logitech Gaming Mouse G502: (accel) acceleration profile 0
[ 21.451] (**) Logitech Gaming Mouse G502: (accel) acceleration factor: 2.000
[ 21.451] (**) Logitech Gaming Mouse G502: (accel) acceleration threshold: 4
[ 21.451] (II) config/udev: Adding input device Logitech Gaming Mouse G502 (/dev/input/mouse0)
[ 21.452] (II) No input driver specified, ignoring this device.
[ 21.452] (II) This device may have been added with another device file.
[ 21.452] (II) config/udev: Adding input device Logitech Gaming Mouse G502 (/dev/input/event1)
[ 21.452] (**) Logitech Gaming Mouse G502: Applying InputClass "system-keyboard"
[ 21.452] (**) Logitech Gaming Mouse G502: Applying InputClass "evdev keyboard catchall"
[ 21.452] (II) Using input driver 'evdev' for 'Logitech Gaming Mouse G502'
[ 21.452] (**) Logitech Gaming Mouse G502: always reports core events
[ 21.452] (**) evdev: Logitech Gaming Mouse G502: Device: "/dev/input/event1"
[ 21.452] (--) evdev: Logitech Gaming Mouse G502: Vendor 0x46d Product 0xc07d
[ 21.452] (--) evdev: Logitech Gaming Mouse G502: Found 1 mouse buttons
[ 21.452] (--) evdev: Logitech Gaming Mouse G502: Found scroll wheel(s)
[ 21.452] (--) evdev: Logitech Gaming Mouse G502: Found relative axes
[ 21.452] (II) evdev: Logitech Gaming Mouse G502: Forcing relative x/y axes to exist.
[ 21.452] (--) evdev: Logitech Gaming Mouse G502: Found absolute axes
[ 21.452] (II) evdev: Logitech Gaming Mouse G502: Forcing absolute x/y axes to exist.
[ 21.452] (--) evdev: Logitech Gaming Mouse G502: Found keys
[ 21.452] (II) evdev: Logitech Gaming Mouse G502: Configuring as mouse
[ 21.452] (II) evdev: Logitech Gaming Mouse G502: Configuring as keyboard
[ 21.452] (II) evdev: Logitech Gaming Mouse G502: Adding scrollwheel support
[ 21.452] (**) evdev: Logitech Gaming Mouse G502: YAxisMapping: buttons 4 and 5
[ 21.452] (**) evdev: Logitech Gaming Mouse G502: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 21.452] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.1/0003:046D:C07D.0002/input/input3/event1"
[ 21.452] (II) XINPUT: Adding extended input device "Logitech Gaming Mouse G502" (type: KEYBOARD, id 9)
[ 21.452] (**) Option "xkb_rules" "evdev"
[ 21.452] (**) Option "xkb_model" "pc104"
[ 21.452] (**) Option "xkb_layout" "pl"
[ 21.452] (II) evdev: Logitech Gaming Mouse G502: initialized for relative axes.
[ 21.452] (WW) evdev: Logitech Gaming Mouse G502: ignoring absolute axes.
[ 21.452] (**) Logitech Gaming Mouse G502: (accel) keeping acceleration scheme 1
[ 21.452] (**) Logitech Gaming Mouse G502: (accel) acceleration profile 0
[ 21.452] (**) Logitech Gaming Mouse G502: (accel) acceleration factor: 2.000
[ 21.452] (**) Logitech Gaming Mouse G502: (accel) acceleration threshold: 4
[ 21.453] (II) config/udev: Adding input device Microsoft Microsoft® SiderWinderTM X4 Keyboard (/dev/input/event2)
[ 21.453] (**) Microsoft Microsoft® SiderWinderTM X4 Keyboard: Applying InputClass "system-keyboard"
[ 21.453] (**) Microsoft Microsoft® SiderWinderTM X4 Keyboard: Applying InputClass "evdev keyboard catchall"
[ 21.453] (II) Using input driver 'evdev' for 'Microsoft Microsoft® SiderWinderTM X4 Keyboard'
[ 21.453] (**) Microsoft Microsoft® SiderWinderTM X4 Keyboard: always reports core events
[ 21.453] (**) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: Device: "/dev/input/event2"
[ 21.453] (--) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: Vendor 0x45e Product 0x768
[ 21.453] (--) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: Found keys
[ 21.453] (II) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: Configuring as keyboard
[ 21.453] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.0/0003:045E:0768.0003/input/input4/event2"
[ 21.453] (II) XINPUT: Adding extended input device "Microsoft Microsoft® SiderWinderTM X4 Keyboard" (type: KEYBOARD, id 10)
[ 21.453] (**) Option "xkb_rules" "evdev"
[ 21.453] (**) Option "xkb_model" "pc104"
[ 21.453] (**) Option "xkb_layout" "pl"
[ 21.454] (II) config/udev: Adding input device Microsoft Microsoft® SiderWinderTM X4 Keyboard (/dev/input/event3)
[ 21.454] (**) Microsoft Microsoft® SiderWinderTM X4 Keyboard: Applying InputClass "system-keyboard"
[ 21.454] (**) Microsoft Microsoft® SiderWinderTM X4 Keyboard: Applying InputClass "evdev keyboard catchall"
[ 21.454] (II) Using input driver 'evdev' for 'Microsoft Microsoft® SiderWinderTM X4 Keyboard'
[ 21.454] (**) Microsoft Microsoft® SiderWinderTM X4 Keyboard: always reports core events
[ 21.454] (**) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: Device: "/dev/input/event3"
[ 21.454] (--) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: Vendor 0x45e Product 0x768
[ 21.454] (--) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: Found 1 mouse buttons
[ 21.454] (--) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: Found scroll wheel(s)
[ 21.454] (--) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: Found relative axes
[ 21.454] (II) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: Forcing relative x/y axes to exist.
[ 21.454] (--) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: Found absolute axes
[ 21.454] (II) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: Forcing absolute x/y axes to exist.
[ 21.454] (--) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: Found keys
[ 21.454] (II) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: Configuring as mouse
[ 21.454] (II) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: Configuring as keyboard
[ 21.454] (II) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: Adding scrollwheel support
[ 21.454] (**) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: YAxisMapping: buttons 4 and 5
[ 21.454] (**) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 21.454] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.1/0003:045E:0768.0004/input/input5/event3"
[ 21.454] (II) XINPUT: Adding extended input device "Microsoft Microsoft® SiderWinderTM X4 Keyboard" (type: KEYBOARD, id 11)
[ 21.454] (**) Option "xkb_rules" "evdev"
[ 21.454] (**) Option "xkb_model" "pc104"
[ 21.454] (**) Option "xkb_layout" "pl"
[ 21.454] (II) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: initialized for relative axes.
[ 21.454] (WW) evdev: Microsoft Microsoft® SiderWinderTM X4 Keyboard: ignoring absolute axes.
[ 21.454] (**) Microsoft Microsoft® SiderWinderTM X4 Keyboard: (accel) keeping acceleration scheme 1
[ 21.454] (**) Microsoft Microsoft® SiderWinderTM X4 Keyboard: (accel) acceleration profile 0
[ 21.454] (**) Microsoft Microsoft® SiderWinderTM X4 Keyboard: (accel) acceleration factor: 2.000
[ 21.454] (**) Microsoft Microsoft® SiderWinderTM X4 Keyboard: (accel) acceleration threshold: 4
[ 21.454] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 21.454] (II) No input driver specified, ignoring this device.
[ 21.454] (II) This device may have been added with another device file.
[ 21.458] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 22.742] (II) fglrx(0): EDID vendor "NEC", prod id 26419
[ 22.742] (II) fglrx(0): Using EDID range info for horizontal sync
[ 22.742] (II) fglrx(0): Using EDID range info for vertical refresh
[ 22.742] (II) fglrx(0): Printing DDC gathered Modelines:
[ 22.742] (II) fglrx(0): Modeline "1680x1050"x0.0 146.25 1680 1960 2136 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz eP)
[ 22.742] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 22.742] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 22.742] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 22.742] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 22.742] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 22.742] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 22.742] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 22.742] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 22.742] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 22.742] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 22.742] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 22.742] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 22.742] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 22.742] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 22.742] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 22.742] (II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 22.742] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 22.742] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 22.742] (II) fglrx(0): Modeline "1366x768"x59.8 84.75 1366 1431 1567 1776 768 771 781 798 -hsync +vsync (47.7 kHz e)
[ 22.742] (II) fglrx(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 22.742] (II) fglrx(0): Modeline "1400x1050"x0.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 22.742] (II) fglrx(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 24.160] (II) fglrx(0): EDID vendor "NEC", prod id 26419
[ 24.160] (II) fglrx(0): Using hsync ranges from config file
[ 24.160] (II) fglrx(0): Using vrefresh ranges from config file
[ 24.160] (II) fglrx(0): Printing DDC gathered Modelines:
[ 24.160] (II) fglrx(0): Modeline "1680x1050"x0.0 146.25 1680 1960 2136 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz eP)
[ 24.160] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 24.160] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 24.160] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 24.160] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 24.160] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 24.161] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 24.161] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 24.161] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 24.161] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 24.161] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 24.161] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 24.161] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 24.161] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 24.161] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 24.161] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 24.161] (II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 24.161] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 24.161] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 24.161] (II) fglrx(0): Modeline "1366x768"x59.8 84.75 1366 1431 1567 1776 768 771 781 798 -hsync +vsync (47.7 kHz e)
[ 24.161] (II) fglrx(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 24.161] (II) fglrx(0): Modeline "1400x1050"x0.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 24.161] (II) fglrx(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
EDIT
Tried symlinking
/usr/lib64/dri
to
/usr/X11R6/lib64/modules
And made that error in Xorg log disappear. However, gdm is still not working. I'm getting stuck at
[ OK ] Reached target Graphical Interface.
I can still log with other tty and startx manually.
Output of
systemctl status gdm
● gdm.service - GNOME Display Manager
Loaded: loaded (/usr/lib/systemd/system/gdm.service; enabled)
Active: active (running) since wto 2014-10-21 16:10:03 CEST; 6min ago
Main PID: 276 (gdm)
CGroup: /system.slice/gdm.service
└─276 /usr/bin/gdm
paź 21 16:10:04 ASRock-P67-Pro3 gdm[276]: GLib-GObject: invalid unclassed pointer in cast to 'GdmSimpleSlave'
paź 21 16:10:04 ASRock-P67-Pro3 gdm[276]: GLib-GObject: invalid unclassed pointer in cast to 'GdmSimpleSlave'
paź 21 16:10:04 ASRock-P67-Pro3 gdm[276]: GLib-GObject: invalid unclassed pointer in cast to 'GdmSimpleSlave'
paź 21 16:10:04 ASRock-P67-Pro3 gdm[276]: GLib-GObject: invalid unclassed pointer in cast to 'GdmSimpleSlave'
paź 21 16:10:06 ASRock-P67-Pro3 systemd-coredump[313]: Process 312 (Xorg) of user 0 dumped core.
paź 21 16:10:06 ASRock-P67-Pro3 systemd-coredump[309]: Process 308 (Xorg) of user 0 dumped core.
paź 21 16:10:06 ASRock-P67-Pro3 systemd-coredump[303]: Process 288 (Xorg) of user 0 dumped core.
paź 21 16:10:06 ASRock-P67-Pro3 systemd-coredump[311]: Process 310 (Xorg) of user 0 dumped core.
paź 21 16:10:06 ASRock-P67-Pro3 systemd-coredump[307]: Process 306 (Xorg) of user 0 dumped core.
paź 21 16:10:06 ASRock-P67-Pro3 systemd-coredump[317]: Process 316 (Xorg) of user 0 dumped core.
and content of
Xorg.0.log
[ 62.476]
X.Org X Server 1.15.2
Release Date: 2014-06-27
[ 62.476] X Protocol Version 11, Revision 0
[ 62.476] Build Operating System: Linux 3.15.1-1-ARCH x86_64
[ 62.476] Current Operating System: Linux ASRock-P67-Pro3 3.16.4-1-ARCH #1 SMP PREEMPT Mon Oct 6 08:22:27 CEST 2014 x86_64
[ 62.476] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda1 rw nomodeset initrd=../initramfs-linux.img
[ 62.477] Build Date: 27 June 2014 07:32:26PM
[ 62.477]
[ 62.477] Current version of pixman: 0.32.6
[ 62.477] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 62.477] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 62.478] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Oct 21 16:11:00 2014
[ 62.478] (==) Using config file: "/etc/X11/xorg.conf"
[ 62.478] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 62.478] (==) ServerLayout "aticonfig Layout"
[ 62.478] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 62.478] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 62.479] (**) | |-->Device "aticonfig-Device[0]-0"
[ 62.479] (==) Automatically adding devices
[ 62.479] (==) Automatically enabling devices
[ 62.479] (==) Automatically adding GPU devices
[ 62.479] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 62.479] Entry deleted from font path.
[ 62.479] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 62.479] Entry deleted from font path.
[ 62.479] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 62.479] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 62.479] Entry deleted from font path.
[ 62.479] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 62.479] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 62.479] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 62.479] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 62.479] (II) Loader magic: 0x811cc0
[ 62.479] (II) Module ABI versions:
[ 62.479] X.Org ANSI C Emulation: 0.4
[ 62.479] X.Org Video Driver: 15.0
[ 62.479] X.Org XInput driver : 20.0
[ 62.479] X.Org Server Extension : 8.0
[ 62.480] (--) PCI:*(0:1:0:0) 1002:6818:174b:e217 rev 0, Mem @ 0xe0000000/268435456, 0xf7e00000/262144, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[ 62.480] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 62.480] Initializing built-in extension Generic Event Extension
[ 62.480] Initializing built-in extension SHAPE
[ 62.480] Initializing built-in extension MIT-SHM
[ 62.480] Initializing built-in extension XInputExtension
[ 62.480] Initializing built-in extension XTEST
[ 62.481] Initializing built-in extension BIG-REQUESTS
[ 62.481] Initializing built-in extension SYNC
[ 62.481] Initializing built-in extension XKEYBOARD
[ 62.481] Initializing built-in extension XC-MISC
[ 62.481] Initializing built-in extension SECURITY
[ 62.481] Initializing built-in extension XINERAMA
[ 62.481] Initializing built-in extension XFIXES
[ 62.481] Initializing built-in extension RENDER
[ 62.481] Initializing built-in extension RANDR
[ 62.481] Initializing built-in extension COMPOSITE
[ 62.482] Initializing built-in extension DAMAGE
[ 62.482] Initializing built-in extension MIT-SCREEN-SAVER
[ 62.482] Initializing built-in extension DOUBLE-BUFFER
[ 62.482] Initializing built-in extension RECORD
[ 62.482] Initializing built-in extension DPMS
[ 62.482] Initializing built-in extension Present
[ 62.482] Initializing built-in extension DRI3
[ 62.482] Initializing built-in extension X-Resource
[ 62.482] Initializing built-in extension XVideo
[ 62.482] Initializing built-in extension XVideo-MotionCompensation
[ 62.483] Initializing built-in extension XFree86-VidModeExtension
[ 62.483] Initializing built-in extension XFree86-DGA
[ 62.483] Initializing built-in extension XFree86-DRI
[ 62.483] Initializing built-in extension DRI2
[ 62.483] (II) "glx" will be loaded by default.
[ 62.483] (II) LoadModule: "glx"
[ 62.483] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 62.483] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 62.483] compiled for 6.9.0, module version = 1.0.0
[ 62.483] Loading extension GLX
[ 62.484] (II) LoadModule: "fglrx"
[ 62.484] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 62.501] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 62.501] compiled for 1.4.99.906, module version = 14.30.4
[ 62.501] Module class: X.Org Video Driver
[ 62.501] (II) Loading sub module "fglrxdrm"
[ 62.501] (II) LoadModule: "fglrxdrm"
[ 62.501] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 62.504] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 62.504] compiled for 1.4.99.906, module version = 14.30.4
[ 62.504] (II) AMD Proprietary Linux Driver Version Identifier:14.30.4
[ 62.504] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-14.301.1001
[ 62.504] (II) AMD Proprietary Linux Driver Build Date: Sep 15 2014 18:11:36
[ 62.504] (++) using VT number 3
[ 62.505] (WW) Falling back to old probe method for fglrx
[ 62.519] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 62.521] ukiDynamicMajor: found major device number 250
[ 62.521] ukiDynamicMajor: found major device number 250
[ 62.521] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 62.521] ukiOpenDevice: node name is /dev/ati/card0
[ 62.521] ukiOpenDevice: open result is 9, (OK)
[ 62.605] ukiOpenByBusid: ukiOpenMinor returns 9
[ 62.605] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 62.607] (--) Chipset Supported AMD Graphics Processor (0x6818) found
[ 62.607] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 62.608] (II) fglrx(0): pEnt->device->identifier=0x23d17f0
[ 62.608] (II) fglrx(0): === [xdl_xs115_atiddxPreInit] === begin
[ 6 -
hi, i am having a problem in my ipad 2 , it is not showing main screen just showing a black blank screen in which downloading icon is only shwn which is continously and when i connect to itunes via windows 7 it showing this error (0xE8000065) can any one
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely. Then recharge for at least an hour and Restore again. -
My large monitor is not showing the screen of my MAC airbook on it. All cables are hooked up. I reset the pram per the instructions I received at the MAC store and the monitor is still not working. Message on blacked out monitor says"check signal cable". All cables are attached and monitor and MAC are both plugged into power source...Help ?
Go to System Preferences, Display. Click on dectect displays.
-
Itouch goes through restore process then will not show home screen
itouch goes through restore process then will not show home screen. Only apple logo shows and flashes periodically.
- Try:
iOS: Not responding or does not turn on
- If not successful and you can't turn the iPod fully off, let the battery fully drain. After charging for at least an hour try the article again.
- If still problem that indicates a hardware problem and an appointment at the genius Bar of an Apple store is in order. -
What causes iphone 3gs every time I insert the SIM card does not show the screen or no service?
what causes iphone 3gs every time I insert the SIM card does not show the screen or no service?
If the iPhone was unlocked unofficially, it has been locked to original carrier again.
-
Not showing Variable screen in Workbook - Refresh
Hi BW Experts,
I am working on BI 7.0
When I try to refresh Workbook in Analyzer it is refreshing the query giving current data, but it is not showing Variable screen.
What should I do to open variable screen when I click on Refresh button in Workbooks.
Kindly advise.
Ram,You should click the 'refresh variable values' button.
Also switch on the 'process variables on refresh' in the workbook properties. -
Suddenly - and for no reason that I can think of - my keyboard does not show on screen what I am typing. In other words it is gibberish. This is only happening in browsers (Firefox and Chrome) but is OK in Word, Excel etc
This has just started today; yesterday, I downloaded a Zone Alarm update which was genuine and I have done a full scan for virus and malware – nothing!
I have tried the FN+NumLock idea which I saw on the internet but that doesn’t seem to work.
Any ideas?Do a malware check with some malware scanning programs on the Windows computer.<br>
Please scan with all programs because each program detects different malware.<br>
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware:<br>http://www.malwarebytes.org/mbam.php
*AdwCleaner:<br>http://www.bleepingcomputer.com/download/adwcleaner/<br>http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware:<br>http://www.superantispyware.com/
*Microsoft Safety Scanner:<br>http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: Home Page:<br>http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
*Spybot Search & Destroy:<br>http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan:<br>http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller:<br>http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked -
i think itunes has removed my iphone software. because now not showing home screen. when i tried to restore my phone there generated an error no is 1015. please help me how can i recover my iphone again?
From the article which you posted your question from:
Errors related to downgrading iOS
The required resource cannot be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go to Settings > General > About and check the version of iOS on the device. If it is newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version is not supported.
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state. -
Why not showing login option in creative cloud it coming only blank
why not showing login option in creative cloud it coming only blank
Please refer to :
You are no longer signed into your Creative Cloud applications
Can't sign in to Creative Cloud Desktop application...
Have CC and Adobe ID, but unable to Sign In with FormsCentral
In case the issue still persists, please contact Adobe Support.
Regards
Rajshree -
Menu bar does not show on screen?
Menu bar does not show on screen.
I'll assume your profile is wrong (10.4.7?) and you are using Lion in full screen mode. If so click the double arrows in the menu bar which should appeare if you mouse into the menu bar area.
If that isn't the case then are you zoomed in? Contol + fingler drag on mouse (or scroll wheel) zooms in or out (see Mouse preferences, Screen Zoom, look at the little movie). -
I solve my problem of black screen when starting up my Mac pro, namely by using the lighting button and then i saw the login screen. Hopefully it works for you.
It was the PRAM.
-
I had purchased and downloaded a tv series to my ipad. Then deleted it due to space constraints. Now I wanted to download it permanently to my MacBook but itunes does not show this purchases. It worked, however, for another series. What can I do?
Thanks for any help!You may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad.
If you haven't synced to a computer them (from here) :
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. -
Htmldb 2.0 login screen not showing proper screen and login does not happen
I installed htmldb 1.6 from the comapnion disk (10.2) and everything
worked fine. I could log into htmldb.
I then upgraded to htmldb 2.0 with no problems on the DB side.
I copied the images dierctory from the compaion disk to the right location
but when I try to log in I get a login screen that does not have the 2.0
splash screen and then when I type in my credentials nothing happens.
I am running:
[oracle10@testdb1 htmldb_2.0]$
/u01/oracle10/OraHome2/Apache/Apache/bin/httpd -version
Server version: Oracle-Application-Server-10g/10.1.2.0.0
Oracle-HTTP-Server
Server built: Dec 2 2004 19:23:24
you can see in the marvel.conf that the image directory is /u01/oracle10/OraHome2/htmldb/images/
Alias /i/ /u01/oracle10/OraHome2/htmldb/images/
<Location /pls/htmldb>
Order deny,allow
PlsqlDocumentPath docs
AllowOverride None
PlsqlDocumentProcedure wwv_flow_file_manager.process_download
PlsqlDatabaseConnectString
testdb1.atcscc.tfmi.nas.faa.gov:1521:d2tfmdb ServiceNameFormat
PlsqlNLSLanguage AMERICAN_AMERICA.WE8ISO8859P1
PlsqlAuthenticationMode Basic
SetHandler pls_handler PlsqlDocumentTablename wwv_flow_file_objects$
PlsqlDatabaseUsername HTMLDB_PUBLIC_USER
PlsqlDefaultPage htmldb
PlsqlDatabasePassword @BX5miUCgp+G3mLhUsFTZ3pNweNo7ykAArA==
AddType text/xml xb1
AddType text/x-component htc
Allow from all
</Location>
I copied the install image directory to this (as you can see)
I.e cp -rf htmldb/images /u01/oracle10/OraHome2
but when I log on to htmldb
(http://xxxx.domain:7777/pls/htmldb)
I get the htmldb logon screen but not the 2.0 splash screen. It's like
its not seeing the gif files.
I enter the workspace /username/password but nothing happens, no
errors, no web page cycle, nothing.......
[oracle10@testdb1 home]$ ls /u01/oracle10/OraHome2/htmldb/images/
16admin.gif Fndtre01.gif
portal_right_menu_bott.gif
1pixelbeige.gif Fndtre02.gifIt looks like your copy command was wrong.
cp -rf htmldb/images /u01/oracle10/OraHome2
will copy the images directory to /u01/oracle10/OraHome2, it won't copy htmldb/images.
You want to:
1) cp -rf htmldb/images /u01/oracle10/OraHome2/htmldb
2) Remove the directory /u01/oracle10/OraHome2/images that you created
Joel
Maybe you are looking for
-
I need to create a Screen Variant and apply to a Z transaction which only allows users access to change MRP Information u2013 MRP1, MRP2, MRP3 and MRP4 tabs. in the Material Master. I do not want to give everyone access to MM02 u2013 Change Material
-
I have succesfully implemented the EDI payment orders (820) using standard PAYEXT and PEXR2002 via program RFFOEDI1. However, I now need to produce an 812 that has the detail on the adjustments made to a payment order (CREADV). The issue...I don't kn
-
Hi, For one of our dataservice which is having slow response (around 1800 ms ) , the audit is showing the following info: query/wrappers/file time: 906 it is NOT showing the name or source info like query/wrappers/file name:ld:PhysicalLayer/XXXLookUp
-
Manually arranging files in finder for slideshow order?
I have a folder full of photo files from a recent vacation. Half of them are from my camera, half from my boyfriend's camera, and they all are named as the original file name the cameras gave them. I want to arrange them in chronological order, blend
-
Hi all, one of customer taken a smartcare contract.I installed hardware which supplied by cisco.Now customer to configure telnet or ssh of that device.I can't able to find the doucment to configure.cau anyone help in this.