BPM Configuration Error on Weblogic Configuration
Hi,
I try to configure BPM Directory and always get error on wlst.sh command
weblogic.common.resourcepool.ResourceSystemException: Cannot load driver class: weblogic.jdbcx.oracle.OracleDataSource
My system spec:
- Solaris SPARC 64
- Weblogic 10.3.0.0 using JRockit 1.6.0_16
- BPM 10gR3
The configuration error in weblogic configuration.
Really need help here..
Thanks
Regards,
Eric Wijaya
Hi Eric,
Just checking: Are you using BPM 10.3.2?
Do you mean the BPM Directory Configuration?Yes, I'm talking about the directory configuration and the engine configuration too.
I've configure the BPM Directory to use BPM's Oracle Driver Version:10,11 which is selected by default by the BPM Configuration Wizard but still got the jdbc driver error. If you are using 10.3.2, you will see that there is another driver called: "Oracle Driver Version:10,11" (without BPM!!). You must use that driver. (if you install the latest 10.3.2 HF, that driver is the default one).
If you don't have that driver, then you are using an older version than 10.3.2. Please migrate to 10.3.2.
Hope this helps,
Ariel
Similar Messages
-
Hyperion Shared Services Configuration Error with Weblogic 9.2
Hi All,
I have been trying to configure Hyperion Shared Services 9.3.1 with Weblogic Ver 9.2
During configuration of the Database and the Application Server, I select Manual Configuration option on Weblogic 9
However, it returns a configuration failure everytime of the Database.
In my case, the DB used is SQL 2005.
Can someone, please advise me.
Thanks in advance
Regards,
ApoHi Apo,
Check the configtool.log in the logs/config folder and post the error message that is being returned.
Thanks
Nick -
I was using configurator without trouble. Unfortunately, my battery died and my computer went down. I plugged my computer in, restarted it and tried to open configurator. Now this is the error I am getting. Apple Configurator could not open your library.The file couldn’t be opened because it isn’t in the correct format. How do I fix this?
Thank you for responding. The number 2 after the file final cut events is temporary so I can copy it to another drive while I am working on this. . i got a new message that reads...
Final Cut Pro must restore or move corrupted databases before opening. -
Configuration error description: The system cannot find the path specified
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Exit code (Decimal): -2068643839
Exit facility code: 1203
Exit error code: 1
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Start time: 2012-10-26 00:24:37
End time: 2012-10-26 00:32:07
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20121026_002259\Detail.txt
Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.0.1600.22%26EvtType%3d0xF57C3D6F%400xFB92A9BB
Machine Properties:
Machine name: TEST-PC
Machine processor count: 4
OS version: Windows Vista
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Sql Server 2008 SQL MSSQL10.SQL
Database Engine Services 1033 Standard Edition
10.0.1600.22 No
Sql Server 2008 SQL MSSQL10.SQL
SQL Server Replication 1033 Standard Edition
10.0.1600.22 No
Sql Server 2008 SQL MSSQL10.SQL
Full-Text Search 1033
Standard Edition 10.0.1600.22 No
Sql Server 2008 SQL MSAS10.SQL
Analysis Services 1033
Standard Edition 10.0.1600.22 No
Sql Server 2008 SQL MSRS10.SQL
Reporting Services 1033
10.0.1600.22 No
Sql Server 2008 TEST MSSQL10.TEST
Database Engine Services 1033 Standard Edition
10.0.1600.22 No
Sql Server 2008 TEST MSSQL10.TEST
SQL Server Replication 1033 Standard Edition
10.0.1600.22 No
Sql Server 2008 TEST MSSQL10.TEST
Full-Text Search 1033
Standard Edition 10.0.1600.22 No
Sql Server 2008 TEST MSAS10.TEST
Analysis Services 1033
Standard Edition 10.0.1600.22 No
Sql Server 2008 TEST MSRS10.TEST
Reporting Services 1033
10.0.1600.22 No
Sql Server 2008 SQLSERVER MSSQL10.SQLSERVER Database Engine Services
1033 Enterprise Evaluation Edition 10.0.1600.22 No
Sql Server 2008 SQLSERVER MSSQL10.SQLSERVER SQL Server Replication
1033 Enterprise Evaluation Edition 10.0.1600.22 No
Sql Server 2008 SQLSERVER MSSQL10.SQLSERVER Full-Text Search
1033 Enterprise Evaluation Edition 10.0.1600.22 No
Sql Server 2008 SQLSERVER MSAS10.SQLSERVER Analysis Services
1033 Enterprise Evaluation Edition 10.0.1600.22 No
Sql Server 2008 SQLSERVER MSRS10.SQLSERVER Reporting Services
1033 10.0.1600.22
No
Sql Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS Database Engine Services
1033 Express Edition 10.1.2531.0 No
Sql Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS SQL Server Replication
1033 Express Edition 10.1.2531.0 No
Sql Server 2008 MSSQLSERVER MSSQL10.MSSQLSERVER Database Engine Services
1033 Standard Edition 10.0.1600.22 No
Sql Server 2008 MSSQLSERVER MSSQL10.MSSQLSERVER SQL Server Replication
1033 Standard Edition 10.0.1600.22 No
Sql Server 2008
Management Tools - Basic 1033 Enterprise Evaluation Edition 10.0.1600.22
No
Sql Server 2008
Management Tools - Complete 1033 Enterprise Evaluation Edition 10.0.1600.22
No
Sql Server 2008
Client Tools Connectivity 1033 Enterprise Evaluation Edition 10.0.1600.22
No
Sql Server 2008
Client Tools Backwards Compatibility 1033 Enterprise Evaluation Edition 10.0.1600.22 No
Sql Server 2008
Client Tools SDK 1033
Enterprise Evaluation Edition 10.0.1600.22 No
Sql Server 2008
Integration Services 1033 Enterprise Evaluation
Edition 10.0.1600.22 No
Package properties:
Description: SQL Server Database Services 2008
SQLProductFamilyCode: {628F8F38-600E-493D-9946-F4178F20A8A9}
ProductName: SQL2008
Type: RTM
Version: 10
SPLevel: 0
Installation location: C:\instal_sw\SQL Server 2008\SQL Server 2008\x64\setup\
Installation edition: EVAL
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: NT AUTHORITY\SYSTEM
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Automatic
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20121026_002259\ConfigurationFile.ini
ENABLERANU: False
ERRORREPORTING: False
FEATURES: SQLENGINE,REPLICATION,BOL,SNAC_SDK,OCS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: sqlserver2008
INSTANCENAME: SQLSERVER2008
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
MEDIASOURCE: C:\instal_sw\SQL Server 2008\SQL Server 2008\
NPENABLED: 0
PID: *****
QUIET: False
QUIETSIMPLE: False
RSINSTALLMODE: FilesOnlyMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\SYSTEM
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: Test-PC\Test
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 0
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20121026_002259\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xFB92A9BB
Configuration error description: The system cannot find the path specified
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20121026_002259\Detail.txt
Feature: SQL Client Connectivity SDK
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Replication
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xFB92A9BB
Configuration error description: The system cannot find the path specified
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20121026_002259\Detail.txt
Feature: SQL Server Books Online
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Microsoft Sync Framework
Status: Passed
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20121026_002259\SystemConfigurationCheck_Report.htmHi Maggie,
Even i am facing the same problem while installing sql server 2008 R2 on windows server 2012 R2
The required error message is provided below:
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Exit code (Decimal): -2068643839
Exit facility code: 1203
Exit error code: 1
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Start time: 2014-11-24 06:23:13
End time: 2014-11-24 06:47:19
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141124_061929\Detail.txt
Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.0.1600.22%26EvtType%3d0xCEC86A55%400xFB92A9BB
Machine Properties:
Machine name: M2MBUILDTEST01
Machine processor count: 2
OS version: Windows Server 2008
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008
SQLProductFamilyCode: {628F8F38-600E-493D-9946-F4178F20A8A9}
ProductName: SQL2008
Type: RTM
Version: 10
SPLevel: 0
Installation location: C:\SQL Server 2008\Developer RTM\x64\setup\
Installation edition: DEVELOPER
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: swg\gverma
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Data
ASDOMAINGROUP: <empty>
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: swg\gverma
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: SWG\gverma
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141124_061929\ConfigurationFile.ini
ENABLERANU: False
ERRORREPORTING: False
FEATURES: SQLENGINE,REPLICATION,FULLTEXT,AS,RS,BIDS,CONN,IS,BC,SDK,BOL,SSMS,ADV_SSMS,SNAC_SDK,OCS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
MEDIASOURCE: C:\SQL Server 2008\Developer RTM\
NPENABLED: 0
PID: *****
QUIET: False
QUIETSIMPLE: False
RSINSTALLMODE: FilesOnlyMode
RSSVCACCOUNT: SWG\gverma
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: swg\gverma
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: SWG\gverma
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 0
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141124_061929\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xFB92A9BB
Configuration error description: The system cannot find the file specified
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141124_061929\Detail.txt
Feature: SQL Client Connectivity SDK
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Replication
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xFB92A9BB
Configuration error description: The system cannot find the file specified
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141124_061929\Detail.txt
Feature: Full-Text Search
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xFB92A9BB
Configuration error description: The system cannot find the file specified
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141124_061929\Detail.txt
Feature: Analysis Services
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Reporting Services
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Integration Services
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Connectivity
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Complete
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Client Tools SDK
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Business Intelligence Development Studio
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Books Online
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Microsoft Sync Framework
Status: Passed
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141124_061929\SystemConfigurationCheck_Report.htm -
Lightroom: configuration error 5. Can't start the app. Can't deinstall.
I am trying to start lightroom CC.
I get a configuration error message.
After deleting the app from the application folder, I can't download a new version or reinstall or anything.
How can I re-downlaod something from CC?
How can I thouroughly delete an app?
Any ideas?
ThanksHi e27ap,
Seems that after deleting the app you are still seeing the app as 'Up to Date' in AAM
Please refer the Kb : CC desktop lists applications as "Up to Date" when not installed
For Configuration error please check : Configuration error 16 | CC, CS
Regards,
Rave -
Hi,
I am trying to configure error pages, I configured it in web.xml for html error codes(404,500 ...) and I am expecting the error page to show when any of the configured html error occurs in any of the four jsp's that I am using.It worked for after disabling "Show friendly messages" in IE.,but instead of a regular html error page can I configure a pop-up, if the error happens.Can someone help me with this issue please.Many Thanks.
Regards,
Keynes.Use Javascript for that. Set a boolean toggle somewhere in the request scope and use it in JSP/JSTL to write a Javascript popup to the response or not.
Having said that, popups almost always lead to bad user experience. I wouldn't even think about using that way to display error messages. -
BPM for Weblogic configuration is failed
1, I install BPM for Weblogic.
2, I create a domain for weblogic using config tool and start it.
3, I create a new directory.
However, the configuration is failed.
The BPM for weblogic is installed in XP and the window of selecting JDK is not pop out.
The log is as follows:
For more help, use help(edit) Starting an edit session ... Started edit session, please be sure to save and activate your
changes once you are done. creating mbean of type JMSServer ... creating mbean of type JMSSystemResource ... creating mbean of type SubDeployment ... creating mbean of type Queue ... creating mbean of type Topic ... creating mbean of type ConnectionFactory ... creating mbean of type ConnectionFactory ... creating mbean of type JDBCSystemResource ... creating mbean of type Property ... creating mbean of type Property ... creating mbean of type Property ... creating mbean of type Property ... creating mbean of type JDBCSystemResource ... creating mbean of type Property ... creating mbean of type Property ... creating mbean of type Property ... creating mbean of type Property ... setting attributes for mbean type JMSServer setting attributes for mbean type JMSSystemResource setting attributes for mbean type SubDeployment setting attributes for mbean type Queue setting attributes for mbean type Topic setting attributes for mbean type JMSConnectionFactory setting attributes for mbean type JMSConnectionFactory setting attributes for mbean type JDBCSystemResource setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCConnectionPoolParams setting attributes for mbean type JDBCDriverParams setting attributes for mbean type JDBCDataSource setting attributes for mbean type JDBCDataSource setting attributes for mbean type JDBCXAParams setting attributes for mbean type JDBCDataSourceParams setting attributes for mbean type JDBCConnectionPoolParams setting attributes for mbean type JDBCDriverParams setting attributes for mbean type JDBCDataSourceParams setting attributes for mbean type JDBCSystemResource setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty Saving all your changes ... Saved all your changes successfully. Your edit session is not stopped, you can continue your edits. Activating all your changes, this may take a while ...
The edit lock associated with this edit session is released
once the activation is completed. Activation completed Creating a user ... Created user successfully Deploying application from E:\OraBPMwlHome20090715WebLogic\j2ee\weblogic\deployer\wlj2eedeployer.ear to targets examplesServer (upload=true) ... <Jul 15, 2009 12:11:44 PM CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, wlj2eedeployer archive: E:\OraBPMwlHome20090715WebLogic\j2ee\weblogic\deployer\wlj2eedeployer.ear, to examplesServer .> .Completed the deployment of Application with status completed Current Status of your Deployment: Deployment command type: deploy Deployment State : completed Deployment Message : no message Deploying application from E:\OraBPMwlHome20090715WebLogic\ears\engine\01-eng-bpmengine3.ear to targets examplesServer (upload=true) ... <Jul 15, 2009 12:11:54 PM CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, 01-eng-bpmengine3 archive: E:\OraBPMwlHome20090715WebLogic\ears\engine\01-eng-bpmengine3.ear, to examplesServer .> Failed to deploy the application with status failed Current Status of your Deployment: Deployment command type: deploy Deployment State : failed Deployment Message : java.lang.OutOfMemoryError: Java heap space No stack trace available. This Exception occurred at Wed Jul 15 12:12:17 CST 2009. weblogic.management.scripting.ScriptException: Error occured while performing deploy : Deployment Failed. at weblogic.management.scripting.ExceptionHandler.handleException(ExceptionHandler.java:48) at weblogic.management.scripting.WLSTUtils.throwWLSTException(WLSTUtils.java:185) at weblogic.management.scripting.JSR88DeployHandler.deploy(JSR88DeployHandler.java:536) at weblogic.management.scripting.WLScriptContext.deploy(WLScriptContext.java:429) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:160) at org.python.core.PyMethod.__call__(PyMethod.java:96) at org.python.core.PyObject.__call__(PyObject.java:248) at org.python.core.PyObject.invoke(PyObject.java:2016) at org.python.pycode._pyx17.deploy$8(<iostream>:223) at org.python.pycode._pyx17.call_function(<iostream>) at org.python.core.PyTableCode.call(PyTableCode.java:208) at org.python.core.PyTableCode.call(PyTableCode.java:404) at org.python.core.PyFunction.__call__(PyFunction.java:184) at org.python.pycode._pyx16.deploy_Applications$61(C:\Documents and Settings\Administrator\.configWizard\tmp\config.py:623) at org.python.pycode._pyx16.call_function(C:\Documents and Settings\Administrator\.configWizard\tmp\config.py) at org.python.core.PyTableCode.call(PyTableCode.java:208) at org.python.core.PyTableCode.call(PyTableCode.java:256) at org.python.core.PyFunction.__call__(PyFunction.java:169) at org.python.pycode._pyx16.f$0(C:\Documents and Settings\Administrator\.configWizard\tmp\config.py:738) at org.python.pycode._pyx16.call_function(C:\Documents and Settings\Administrator\.configWizard\tmp\config.py) at org.python.core.PyTableCode.call(PyTableCode.java:208) at org.python.core.PyCode.call(PyCode.java:14) at org.python.core.Py.runCode(Py.java:1135) at org.python.util.PythonInterpreter.execfile(PythonInterpreter.java:167) at weblogic.management.scripting.WLST.main(WLST.java:129) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at weblogic.WLST.main(WLST.java:29)
Exiting WebLogic Scripting Tool.
<Jul 15, 2009 12:12:17 PM CST> <Warning> <JNDI> <BEA-050001> <WLContext.close() was called in a different thread than the one in which it was created.> QuestionConfirm Action
Do you want to cancel this wizard?Hi,
Thanks for your reply. I change the file and reconfigure the BPM for weblogic. However, it is still failed in 70-72%.
-------------------log message-------------------------------
TO_MSG PATH=/root/bea/wlserver_10.3/server/bin:/root/bea/modules/org.apache.ant_1.6.5/bin:/root/bea/jrockit_160_05/jre/bin:/root/bea/jrockit_160_05/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin
TO_MSG
TO_MSG Your environment has been set.
TO_MSG
TO_MSG CLASSPATH=/root/bea/patch_wlw1030/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/root/bea/patch_wls1030/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/root/bea/patch_cie660/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/root/bea/jrockit_160_05/lib/tools.jar:/root/bea/wlserver_10.3/server/lib/weblogic_sp.jar:/root/bea/wlserver_10.3/server/lib/weblogic.jar:/root/bea/modules/features/weblogic.server.modules_10.3.0.0.jar:/root/bea/wlserver_10.3/server/lib/webservices.jar:/root/bea/modules/org.apache.ant_1.6.5/lib/ant-all.jar:/root/bea/modules/net.sf.antcontrib_1.0.0.0_1-0b2/lib/ant-contrib.jar:/root/OraBPMwlHome/lib/fuego.boot.jar:/root/OraBPMwlHome/bin/./:/root/OraBPMwlHome/bin/./lax.jar::/root/bea/wlserver_10.3/common/eval/pointbase/lib/pbembedded57.jar:/root/bea/wlserver_10.3/common/eval/pointbase/lib/pbtools57.jar:/root/bea/wlserver_10.3/common/eval/pointbase/lib/pbclient57.jar
TO_MSG
TO_MSG Initializing WebLogic Scripting Tool (WLST) ...
TO_MSG
TO_MSG Welcome to WebLogic Server Administration Scripting Shell
TO_MSG
TO_MSG Type help() for help on available commands
TO_MSG
TO_MSG Starting server BPMServer
TO_MSG Please see the server log files for startup messages available at /root/weblogic3/bpm
TO_MSG Starting weblogic server ...
TO_MSG WLST-WLS-1249792014056: [WARN ] -XX:MaxPermSize=256m is not a valid VM option. Ignoring
TO_MSG .WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ26¥ネニ58ᄃメ CST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with BEA JRockit(R) Version R27.6.0-50_o-100423-1.6.0_05-20080626-2104-linux-ia32 from BEA Systems, Inc.>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ00ᄃメ CST> <Info> <Management> <BEA-140013> </root/weblogic3/bpm/config/config.xml not found>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ00ᄃメ CST> <Info> <Management> <BEA-141254> <Generating new domain directory in /root/weblogic3/bpm>
TO_MSG .....WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ12ᄃメ CST> <Info> <Management> <BEA-141255> <Domain generation completed in 12,326 milliseconds.>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ13ᄃメ CST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3 Fri Jul 25 16:30:05 EDT 2008 1137967 >
TO_MSG .WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ15ᄃメ CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ15ᄃメ CST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ16ᄃメ CST> <Notice> <Log Management> <BEA-170019> <The server log file /root/weblogic3/bpm/servers/BPMServer/logs/BPMServer.log is opened. All server side log events will be written to this file.>
TO_MSG ...WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ24ᄃメ CST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
TO_MSG ....WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ34ᄃメ CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ34ᄃメ CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ34ᄃメ CST> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
TO_MSG .WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ35ᄃメ CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ35ᄃメ CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ35ᄃメ CST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 127.0.0.1:7001 for protocols iiop, t3, ldap, snmp, http.>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ35ᄃメ CST> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "BPMServer" for domain "bpm" running in Development Mode>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ36ᄃメ CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ36ᄃメ CST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
TO_MSG Server started successfully.
TO_MSG Started Server. Trying to connect to the server ...
TO_MSG Connecting to t3://localhost.localdomain:7001 with userid weblogic ...
TO_MSG Successfully connected to Admin Server 'BPMServer' that belongs to domain 'bpm'.
TO_MSG
TO_MSG Warning: An insecure protocol was used to connect to the
TO_MSG server. To ensure on-the-wire security, the SSL port or
TO_MSG Admin port should be used instead.
TO_MSG
TO_MSG Location changed to edit tree. This is a writable tree with
TO_MSG DomainMBean as the root. To make changes you will need to start
TO_MSG an edit session via startEdit().
TO_MSG
TO_MSG For more help, use help(edit)
TO_MSG
TO_MSG Starting an edit session ...
TO_MSG Started edit session, please be sure to save and activate your
TO_MSG changes once you are done.
TO_MSG creating mbean of type JMSServer ...
TO_MSG creating mbean of type JMSSystemResource ...
TO_MSG creating mbean of type SubDeployment ...
TO_MSG creating mbean of type Queue ...
TO_MSG creating mbean of type Topic ...
TO_MSG creating mbean of type ConnectionFactory ...
TO_MSG creating mbean of type ConnectionFactory ...
TO_MSG creating mbean of type Server ...
TO_MSG creating mbean of type JDBCSystemResource ...
TO_MSG creating mbean of type Property ...
TO_MSG creating mbean of type Property ...
TO_MSG creating mbean of type Property ...
TO_MSG creating mbean of type Property ...
TO_MSG creating mbean of type JDBCSystemResource ...
TO_MSG creating mbean of type Property ...
TO_MSG creating mbean of type Property ...
TO_MSG creating mbean of type Property ...
TO_MSG creating mbean of type Property ...
TO_MSG creating mbean of type Realm ...
TO_MSG creating mbean of type RoleMapper ...
TO_MSG creating mbean of type CredentialMapper ...
TO_MSG creating mbean of type CertPathProvider ...
TO_MSG creating mbean of type Authorizer ...
TO_MSG creating mbean of type Adjudicator ...
TO_MSG creating mbean of type AuthenticationProvider ...
TO_MSG creating mbean of type AuthenticationProvider ...
TO_MSG setting attributes for mbean type JMSServer
TO_MSG setting attributes for mbean type JMSSystemResource
TO_MSG setting attributes for mbean type SubDeployment
TO_MSG setting attributes for mbean type Queue
TO_MSG setting attributes for mbean type Topic
TO_MSG setting attributes for mbean type JMSConnectionFactory
TO_MSG setting attributes for mbean type JMSConnectionFactory
TO_MSG setting attributes for mbean type Server
TO_MSG setting attributes for mbean type JDBCSystemResource
TO_MSG setting attributes for mbean type JDBCProperty
TO_MSG setting attributes for mbean type JDBCProperty
TO_MSG setting attributes for mbean type JDBCProperty
TO_MSG setting attributes for mbean type JDBCProperty
TO_MSG setting attributes for mbean type JDBCConnectionPoolParams
TO_MSG setting attributes for mbean type JDBCDriverParams
TO_MSG setting attributes for mbean type JDBCDataSource
TO_MSG setting attributes for mbean type DefaultIdentityAsserter
TO_MSG setting attributes for mbean type SecurityConfiguration
TO_MSG setting attributes for mbean type SecurityParams
TO_MSG setting attributes for mbean type EmbeddedLDAP
TO_MSG setting attributes for mbean type SecurityParams
TO_MSG setting attributes for mbean type Domain
TO_MSG setting attributes for mbean type JDBCDataSource
TO_MSG setting attributes for mbean type JDBCXAParams
TO_MSG setting attributes for mbean type JDBCDataSourceParams
TO_MSG setting attributes for mbean type JDBCConnectionPoolParams
TO_MSG setting attributes for mbean type JDBCDriverParams
TO_MSG setting attributes for mbean type JDBCDataSourceParams
TO_MSG setting attributes for mbean type JDBCSystemResource
TO_MSG setting attributes for mbean type JDBCProperty
TO_MSG setting attributes for mbean type JDBCProperty
TO_MSG setting attributes for mbean type JDBCProperty
TO_MSG setting attributes for mbean type JDBCProperty
TO_MSG Saving all your changes ...
TO_MSG Saved all your changes successfully.
TO_MSG Your edit session is not stopped, you can continue your edits.
TO_MSG Activating all your changes, this may take a while ...
TO_MSG The edit lock associated with this edit session is released
TO_MSG once the activation is completed.
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ53ᄃメ CST> <Warning> <Management> <BEA-141239> <The non-dynamic attribute InternalAppsDeployOnDemandEnabled on weblogic.management.configuration.DomainMBeanImpl@fffe8220([bpm]) has been changed. This may require redeploying or rebooting configured entities>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ53ᄃメ CST> <Warning> <Management> <BEA-141238> <A non-dynamic change has been made which affects the server BPMServer. This server must be rebooted in order to consume this change.>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ53ᄃメ CST> <Warning> <Management> <BEA-141239> <The non-dynamic attribute RotateLogOnStartup on weblogic.management.configuration.LogMBeanImpl@1759a12([bpm]/Log[bpm]) has been changed. This may require redeploying or rebooting configured entities>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ53ᄃメ CST> <Warning> <Management> <BEA-141238> <A non-dynamic change has been made which affects the server BPMServer. This server must be rebooted in order to consume this change.>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ53ᄃメ CST> <Warning> <Management> <BEA-141239> <The non-dynamic attribute ListenAddress on weblogic.management.configuration.ServerMBeanImpl@2ddd7637([bpm]/Servers[BPMServer]) has been changed. This may require redeploying or rebooting configured entities>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ53ᄃメ CST> <Warning> <Management> <BEA-141238> <A non-dynamic change has been made which affects the server BPMServer. This server must be rebooted in order to consume this change.>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ53ᄃメ CST> <Warning> <Management> <BEA-141239> <The non-dynamic attribute RotateLogOnStartup on weblogic.management.configuration.LogMBeanImpl@2df105fa([bpm]/Servers[BPMServer]/Log[BPMServer]) has been changed. This may require redeploying or rebooting configured entities>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ53ᄃメ CST> <Warning> <Management> <BEA-141238> <A non-dynamic change has been made which affects the server BPMServer. This server must be rebooted in order to consume this change.>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ53ᄃメ CST> <Warning> <Management> <BEA-141239> <The non-dynamic attribute RotateLogOnStartup on weblogic.management.configuration.WebServerLogMBeanImpl@2df106e5([bpm]/Servers[BPMServer]/WebServer[BPMServer]/WebServerLog[BPMServer]) has been changed. This may require redeploying or rebooting configured entities>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ53ᄃメ CST> <Warning> <Management> <BEA-141238> <A non-dynamic change has been made which affects the server BPMServer. This server must be rebooted in order to consume this change.>
TO_MSG
TO_MSG The following non-dynamic attribute(s) have been changed on MBeans
TO_MSG that require server re-start:
TO_MSG MBean Changed : com.bea:Name=BPMServer,Type=Log,Server=BPMServer
TO_MSG Attributes changed : RotateLogOnStartup
TO_MSG
TO_MSG MBean Changed : com.bea:Name=BPMServer,Type=Server
TO_MSG Attributes changed : ListenAddress
TO_MSG
TO_MSG MBean Changed : com.bea:Name=bpm,Type=Log
TO_MSG Attributes changed : RotateLogOnStartup
TO_MSG
TO_MSG MBean Changed : com.bea:Name=bpm,Type=Domain
TO_MSG Attributes changed : InternalAppsDeployOnDemandEnabled, ProductionModeEnabled
TO_MSG
TO_MSG MBean Changed : com.bea:Name=BPMServer,Type=WebServerLog,Server=BPMServer,WebServer=BPMServer
TO_MSG Attributes changed : RotateLogOnStartup
TO_MSG
TO_MSG Activation completed
TO_MSG Creating a user ...
TO_MSG
TO_MSG Created user successfully
TO_MSG Deploying application from /root/OraBPMwlHome/j2ee/weblogic/deployer/wlj2eedeployer.ear to targets BPMServer (upload=true) ...
TO_MSG <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ28¥ネニ01ᄃメ CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, wlj2eedeployer [archive: /root/OraBPMwlHome/j2ee/weblogic/deployer/wlj2eedeployer.ear], to BPMServer .>
TO_MSG .Completed the deployment of Application with status completed
TO_MSG Current Status of your Deployment:
TO_MSG Deployment command type: deploy
TO_MSG Deployment State : completed
TO_MSG Deployment Message : no message
TO_MSG Deploying application from /root/OraBPMwlHome/ears/engine/01-eng-bpmengine.ear to targets BPMServer (upload=true) ...
TO_MSG <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ28¥ネニ08ᄃメ CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, 01-eng-bpmengine [archive: /root/OraBPMwlHome/ears/engine/01-eng-bpmengine.ear], to BPMServer .>
TO_MSG .................Completed the deployment of Application with status completed
TO_MSG Current Status of your Deployment:
TO_MSG Deployment command type: deploy
TO_MSG Deployment State : completed
TO_MSG Deployment Message : no message
TO_MSG Deploying application from /root/OraBPMwlHome/ears/webapps/webapps_expanded/08-workspace-XAFDIDS.ear to targets BPMServer (upload=true) ...
TO_MSG <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ29¥ネニ48ᄃメ CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, 08-workspace-XAFDIDS.ear [archive: /root/OraBPMwlHome/ears/webapps/webapps_expanded/08-workspace-XAFDIDS.ear], to BPMServer .>
TO_MSG .Completed the deployment of Application with status completed
TO_MSG Current Status of your Deployment:
TO_MSG Deployment command type: deploy
TO_MSG Deployment State : completed
TO_MSG Deployment Message : no message
TO_MSG Deploying application from /root/OraBPMwlHome/ears/webapps/webapps_expanded/09-feeds-XAFDIDS.ear to targets BPMServer (upload=true) ...
TO_MSG <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ30¥ネニ45ᄃメ CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, 09-feeds-XAFDIDS.ear [archive: /root/OraBPMwlHome/ears/webapps/webapps_expanded/09-feeds-XAFDIDS.ear], to BPMServer .>
TO_MSG .Completed the deployment of Application with status completed
TO_MSG Current Status of your Deployment:
TO_MSG Deployment command type: deploy
TO_MSG Deployment State : completed
TO_MSG Deployment Message : no message
TO_MSG Deploying application from /root/OraBPMwlHome/ears/webapps/webapps_expanded/06-workspaceadmin-XAFDIDS.ear to targets BPMServer (upload=true) ...
TO_MSG <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ31¥ネニ00ᄃメ CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, 06-workspaceadmin-XAFDIDS.ear [archive: /root/OraBPMwlHome/ears/webapps/webapps_expanded/06-workspaceadmin-XAFDIDS.ear], to BPMServer .>
TO_MSG .Completed the deployment of Application with status completed
TO_MSG Current Status of your Deployment:
TO_MSG Deployment command type: deploy
TO_MSG Deployment State : completed
TO_MSG Deployment Message : no message
TO_MSG Deploying application from /root/OraBPMwlHome/ears/webapps/07-papiws-wls103-XAFDIDS.ear to targets BPMServer (upload=true) ...
TO_MSG <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ31¥ネニ31ᄃメ CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, 07-papiws-wls103-XAFDIDS.ear [archive: /root/OraBPMwlHome/ears/webapps/07-papiws-wls103-XAFDIDS.ear], to BPMServer .>
TO_MSG ..WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ31¥ネニ48ᄃメ CST> <Error> <HTTP> <BEA-101220> <Error occurred while setting document root for "weblogic.servlet.internal.WebAppServletContext@30302d0 - appName: '07-papiws-wls103-XAFDIDS.ear', name: 'papiws', context-path: '/papiws', spec-version: '2.5'" to "/root/weblogic3/bpm/servers/BPMServer/tmp/_WL_user/07-papiws-wls103-XAFDIDS.ear/f0r1c0/papiws.war".>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ31¥ネニ48ᄃメ CST> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1249792304208' for task '5'. Error is: 'weblogic.application.ModuleException: Failed to load webapp: 'papiws''
TO_MSG WLST-WLS-1249792014056: weblogic.application.ModuleException: Failed to load webapp: 'papiws'
TO_MSG WLST-WLS-1249792014056: at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:387)
TO_MSG WLST-WLS-1249792014056: at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
TO_MSG WLST-WLS-1249792014056: at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
TO_MSG WLST-WLS-1249792014056: at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
TO_MSG WLST-WLS-1249792014056: at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
TO_MSG WLST-WLS-1249792014056: Truncated. see log file for complete stacktrace
TO_MSG WLST-WLS-1249792014056: java.io.IOException: Error opening file
TO_MSG WLST-WLS-1249792014056: at java.util.zip.ZipFile.open(Native Method)
TO_MSG WLST-WLS-1249792014056: at java.util.zip.ZipFile.<init>(ZipFile.java:117)
TO_MSG WLST-WLS-1249792014056: at java.util.zip.ZipFile.<init>(ZipFile.java:133)
TO_MSG WLST-WLS-1249792014056: at weblogic.utils.classloaders.ZipClassFinder.<init>(ZipClassFinder.java:23)
TO_MSG WLST-WLS-1249792014056: at weblogic.application.io.ArchivedWar$WebInfClassesFinder.<init>(ArchivedWar.java:290)
TO_MSG WLST-WLS-1249792014056: Truncated. see log file for complete stacktrace
TO_MSG WLST-WLS-1249792014056: >
TO_MSG WLST-WLS-1249792014056: java.io.FileNotFoundException: /root/weblogic3/bpm/config/config.xml (Too many open files)
TO_MSG WLST-WLS-1249792014056: at java.io.FileOutputStream.open(Native Method)
TO_MSG WLST-WLS-1249792014056: at java.io.FileOutputStream.<init>(FileOutputStream.java:179)
TO_MSG WLST-WLS-1249792014056: at java.io.FileOutputStream.<init>(FileOutputStream.java:131)
TO_MSG WLST-WLS-1249792014056: at weblogic.utils.FileUtils.writeToFile(FileUtils.java:115)
TO_MSG WLST-WLS-1249792014056: at weblogic.utils.Fil -
ALC-LCM-100-011 error for configuring LC to weblogic
When trying to configure LC to managed weblogic application server. I am seeing this error. I tried to change the port from 7001 to 8001(configured for managed server). I tried to put the IP of localhost and tried with 127.0.0.1 and no use. My weblogic is running and I am able to see the page when hit http://localhost:7001/console
Please help me if I missed some thing for configuration.Hi,
Are you still facing this issue.
In case you do, Could you please check whether the Machine is mapped to the Application Server and further with the managed Server in weblogic.
I had a similar issue some time back, I was able to resolve it by checking the weblogic configuration for the Managed Server running LC.
- Pushkar -
hi
Error to run Configuration Wizard weblogic 12.1.2
my system is windows xp by 2 gig ram
and jvm version
C:\Program Files\Java\jdk1.7.0_25\bin>java -version
java version "1.7.0_25"
Java(TM) SE Runtime Environment (build 1.7.0_25-b17)
Java HotSpot(TM) Client VM (build 23.25-b01, mixed mode, sharing)
how resolve this problem and how find log file weblogic to this error?In user environments where the path to java is not already established as an system-level environment variable, the service is unable to determine where to find java and this error will occur.
This could occur, for example, in environments where there is more than one JDK installed, or where the default JDK is different from the JDK which needs to be used by WLS.
Try to set the environment variable in windows i.e JAVA_HOME=C:\Sun\Java\jdk1.7.xx.x. to point to jdk 1.7 and run the configuration wizard.
Hope it helps!!
Thanks,
Vijaya -
'UnknownHostException ' during OBPM enterprise for weblogic configuration
Hi,
I am configuring OBPM enterprise 10.3 for weblogic on Windows 7 machine.
Below is the error that I receive,
[<I> 18/01/12 14:52:23] t3://esp50ws19444-7:7001
[<I> 18/01/12 14:52:23] Connecting to t3://esp50ws19444-7:7001 with userid weblogic ...
[<I> 18/01/12 14:52:23] This Exception occurred at Wed Jan 18 14:52:23 CET 2012.
[<I> 18/01/12 14:52:23] javax.naming.ServiceUnavailableException [Root exception is java.net.UnknownHostException: esp50ws19444-7]
[<I> 18/01/12 14:52:23] No server running at t3://esp50ws19444-7:7001 or the user/password is wrong
1) With WLST on comand prompt, I am able to connect to t3://esp50ws19444-7:7001
2) I tried using the 'IP address' and Full DNS name 'esp50ws19444-7.CRB.APMOLLER.NET' but BPM configuration still fails
3) Referred below threads but no success,
UnknownHostException during OBPM Enterprise Setup
[Urgent]Oracle BPM 10gR3 integrate with Oracle weblogic 10gR3 failed.
Unable to configure the Directory in BPM Enterprise Edition for WebLogic
WLST Failed in Oracle BPM Enterprise for Weblogic Server
I see that my C:\windows\system32\drivers\etc\hosts file is empty and it says that the name resoultion is managed in DNS itself.
Giving localhost and computername/ipaddress in 'hosts' file did not help me.
Can anybody tell me if this can be resolved?
Regards,
AkshayHi,
I am really surprise to see this behavior,
weblogic is able to connect to t3:server:port and OBPM is refusing to connect in WLST
Anybody can let me know why is this behavior?
Regads -
Receiver Mail Adapter configuration Error???
Hi,
i've created a Mail Adapter with the following configuration:
Adaptertype: Mail
Receiver
Transport-Protocol: SMTP
Message-Protocol: XIPAYLOAD
Adapter-Engine: Integration-Engine
I set From and To Fields to a valid address. When i start a test the message is passing the integration engine and an error occurs within the mail-adapter:
Mail: Configuration error: Channel 7a15b118b96b392bbc9be5922f55b7d0is not configured for XIMailAdapter
Mail: call failed; com.sap.aii.af.ra.ms.api.RecoverableException: Error: invalid XIMailAdapter channel 7a15b118b96b392bbc9be5922f55b7d0
How can this happen?
regards
msHi,
Reffer these BLOGS
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
/people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken]
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure
http://help.sap.com/saphelp_nw04/helpdata/en/3c/b4a6490a08cd41a8c91759c3d2f401/content.htm
<u><b>Target Structure:::::</b></u>
- <xs:schema targetNamespace="http://sap.com/xi/XI/Mail/30"
xmlns:xi="http://sap.com/xi/XI/Mail/30"
xmlns:xs="http://www.w3.org/2001/XMLSchema">
- <!--
Mail
-->
- <xs:element name="Mail">
- <xs:annotation>
<xs:documentation>Mail package for XI - Mail Adapter</xs:documentation>
</xs:annotation>
- <xs:complexType>
- <xs:sequence>
<xs:element name="Subject" type="xs:string" minOccurs="0" />
<xs:element name="From" type="xs:string" minOccurs="0" />
<xs:element name="To" type="xs:string" minOccurs="0" />
<xs:element name="Reply_To" type="xs:string" minOccurs="0" />
<xs:element name="Content_Type" type="xs:string" minOccurs="0" />
<xs:element name="Date" type="xs:dateTime" minOccurs="0" />
<xs:element name="Message_ID" type="xs:string" minOccurs="0" />
<xs:element name="X_Mailer" type="xs:string" minOccurs="0" />
- <xs:element name="Content" minOccurs="0">
- <xs:annotation>
<xs:documentation>any type</xs:documentation>
</xs:annotation>
</xs:element>
</xs:sequence>
<xs:attribute name="encoding" type="xs:string" />
</xs:complexType>
</xs:element>
- <xs:element name="MailReceipt">
- <xs:annotation>
<xs:documentation>Mail Receipt for XI - Mail Adaper</xs:documentation>
</xs:annotation>
- <xs:complexType>
- <xs:sequence>
<xs:element name="Server" type="xs:string" />
<xs:element name="Format" type="xs:string" />
<xs:element name="UseMailPackage" type="xs:boolean" />
<xs:element name="Encoding" type="xs:string" />
<xs:element name="Subject" type="xs:string" minOccurs="0" />
<xs:element name="From" type="xs:dateTime" minOccurs="0" />
<xs:element name="To" type="xs:string" minOccurs="0" />
<xs:element name="Date" type="xs:dateTime" minOccurs="0" />
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:schema>
Regards
Seshagiri -
Configure Visualvm with weblogic 10.0
I followed the procedure below to configure VisualVm with weblogic 10.0
I have installed jdk1.6_18 in /usr/jdk1.6_18 on solaris 10.0.
created jstatd.all.policy file with entry
grant codebase "file:${java.home}/../lib/tools.jar" {
permission java.security.AllPermission;
in /usr/jdk1.6_18/bin
executed below line from the same where i have the jstatd.all.policy file
jstatd -J-Djava.security.policy=jstatd.all.policy
I am unable to enable jstatd i getting the following error:
./jstatd -J-Djava.security.policy=java.all.policy
Error occurred during initialization of VM
java/lang/NoClassDefFoundError: java/lang/Object
I have followed the below link to configure
http://www.ibm.com/developerworks/forums/thread.jspa?messageID=14287864
Any help would be greatly appreciated.Hi,
Step1). Please open "java.policy" file from the following location <JAVA_HOME>\jre\lib\security
Step2). // Standard extensions get all permissions by default and add the Highlighted Code Snippet there at the TOP below is the modified content of "java.policy" file
// Standard extensions get all permissions by default
<font color=red>
grant codeBase "file:C:/bea103/jdk160_05/lib/tools.jar" {
permission java.security.AllPermission;
</font>
grant codeBase "file:${{java.ext.dirs}}/*" {
permission java.security.AllPermission;
// default permissions granted to all domains
grant {
// Allows any thread to stop itself using the java.lang.Thread.stop()
// method that takes no argument.
// Note that this permission is granted by default only to remain
// backwards compatible.
// It is strongly recommended that you either remove this permission
// from this policy file or further restrict it to code sources
// that you specify, because Thread.stop() is potentially unsafe.
// See "http://java.sun.com/notes" for more information.
permission java.lang.RuntimePermission "stopThread";
// allows anyone to listen on un-privileged ports
permission java.net.SocketPermission "localhost:1024-", "listen";
// "standard" properies that can be read by anyone
permission java.util.PropertyPermission "java.version", "read";
permission java.util.PropertyPermission "java.vendor", "read";
permission java.util.PropertyPermission "java.vendor.url", "read";
permission java.util.PropertyPermission "java.class.version", "read";
permission java.util.PropertyPermission "os.name", "read";
permission java.util.PropertyPermission "os.version", "read";
permission java.util.PropertyPermission "os.arch", "read";
permission java.util.PropertyPermission "file.separator", "read";
permission java.util.PropertyPermission "path.separator", "read";
permission java.util.PropertyPermission "line.separator", "read";
permission java.util.PropertyPermission "java.specification.version", "read";
permission java.util.PropertyPermission "java.specification.vendor", "read";
permission java.util.PropertyPermission "java.specification.name", "read";
permission java.util.PropertyPermission "java.vm.specification.version", "read";
permission java.util.PropertyPermission "java.vm.specification.vendor", "read";
permission java.util.PropertyPermission "java.vm.specification.name", "read";
permission java.util.PropertyPermission "java.vm.version", "read";
permission java.util.PropertyPermission "java.vm.vendor", "read";
permission java.util.PropertyPermission "java.vm.name", "read";
Step3). run the "jstack"
Thanks
Jay SenSharma
http://jaysensharma.wordpress.com (WebLogic Wonders Are Here) -
Configuration error while deploying beans
Hi ,
I am trying to deploy entity beans. While deploying I am getting the
following error. I checked weblogic_classpath. It has got .\classes. Any
help is highly appreciated. Find the attached start script.
EXCEPTION DESCRIPTION: Configuration error. Class weblogic.jdbc.jts.Driver
not found.
at
TOPLink.Public.Exceptions.DatabaseException.configurationErrorClassNotFound(
DatabaseException.java:54)
at
TOPLink.Public.Sessions.DefaultConnector.loadDriver(DefaultConnector.java:11
6)
at
TOPLink.Public.Sessions.DefaultConnector.connect(DefaultConnector.java:54)
at
TOPLink.Public.PublicInterface.JDBCLogin.connect(JDBCLogin.java:180)
at
TOPLink.Private.DatabaseAccess.DatabaseAccessor.p(DatabaseAccessor.java)
at
TOPLink.Private.DatabaseAccess.DatabaseAccessor.connect(DatabaseAccessor.jav
a)
at
TOPLink.Public.ThreeTier.ConnectionPool.buildConnection(ConnectionPool.java:
86)
at
TOPLink.Public.ThreeTier.ExternalConnectionPool.startUp(ExternalConnectionPo
ol.java:91)
at
TOPLink.Public.ThreeTier.ServerSession.connect(ServerSession.java, Compiled
Code)
at
TOPLink.Public.PublicInterface.DatabaseSession.login(DatabaseSession.java:36
3)
at
TOPLink.Private.EJB.WebLogic.DeploymentManager.sessionLogin(DeploymentManage
r.java)
at
TOPLink.Private.EJB.WebLogic.DeploymentManager.setup(DeploymentManager.java)
[startWebLogic.cmd]Post Author: ejthunder
CA Forum: Deployment
It looks like you're trying to deploy with the CR.NET merge modules for VS2003. You'll need to deploy the CR.NET merge modules for VS2005 instead.
You can find the merge modules for the various versions at this link on the BOBJ site:http://support.businessobjects.com/downloads/merge_modules.asp
Choose the correct version. If you're using the bundled edition of CR.NET that ships with VS2005 - CR.NET 2005, then click on the link for VS2005. If you're using CR XI Developer, or CR XI R2 Developer then click on the link for the version you're using.
The CR.NET 2005 merge modules have deployment instructions in the download.
I hope this helps!
EJ -
Pre-requisites required for the local configuration of the Weblogic portal
Hi All,
I have got the code from the client. It is appenntly came to know that Code has been developed in Weblogic workshop.
When we build teh application we are getting the following web services related Errors:
ERROR: DESCRIPTION:An unexpected exception occurred while attempting to locate the run-time information for this Web Service. Error: java.lang.NullPointerException:null
WARNING: SUGGESTION:An unexpected error occurred. Please contact [email protected] for further assistance.
ERROR: ERROR
ERROR: DESCRIPTION:An unexpected exception occurred while attempting to locate the run-time information for this Web Service. Error: java.lang.NullPointerException:null
WARNING: SUGGESTION:An unexpected error occurred. Please contact [email protected] for further assistance.
ERROR: ERROR
ERROR: DESCRIPTION:An unexpected exception occurred while attempting to locate the run-time information for this Web Service. Error: java.lang.NullPointerException:null
WARNING: SUGGESTION:An unexpected error occurred. Please contact [email protected] for further assistance.
ERROR: ERROR
ERROR: DESCRIPTION:An unexpected exception occurred while attempting to locate the run-time information for this Web Service. Error: java.lang.NullPointerException:null
WARNING: SUGGESTION:An unexpected error occurred. Please contact [email protected] for further assistance.
ERROR: ERROR
ERROR: DESCRIPTION:An unexpected exception occurred while attempting to locate the run-time information for this Web Service. Error: java.lang.NullPointerException:null
WARNING: SUGGESTION:An unexpected error occurred. Please contact [email protected] for further assistance.
ERROR: ERROR
ERROR: DESCRIPTION:An unexpected exception occurred while attempting to locate the run-time information for this Web Service. Error: java.lang.NullPointerException:null
WARNING: SUGGESTION:An unexpected error occurred. Please contact [email protected] for further assistance.
PortaleWebApp: Created control beans for 19 controls in 12703 milliseconds
BUILD FAILED
ERROR: Build failed with 15 error(s).
When we deploy in the Portal weblogic server, Application is deploying with out any errors. But it is not showing any login page when I start the PTLoginMain.portal file.
As I am completly new to this Weblogic Portal server, Please let me know, Do i need to configure the any setting before starting the application. I mean to ask you that Pre-requisites required for the local configuration of the Weblogic portal Server.
Any Help would be much appriciated.
Regards & thanks,
Nirmala Vijaay Sekhar Varreand your server address can be resolved or not?
Are you accessing the server from Windows or Linux?
- On Linux try editing the /etc/hosts file and add something like: 10.241.110.105 server1.etcetera
- On Windows try editing the C:\WINDOWS\system32\drivers\etc\hosts file and add something like: 10.241.110.105 server1.etcetera
When this works, contact your system administrator and ask him or her to map an ip to your hostname in DNS and DHCP
such that the servername automatically resolves the ip-address -
Hi All,
I am using Weblogic as application server for ORM. I have followed all the steps given in ORM installation guide and used the "Install software only" option.
After that I have done all the configurations in weblogic as specified in the document. Then I deployed the server.ear file. Everything was successful and no error occured. But when I start the server.ear application then it gets failed and I get the following exception:
weblogic.application.ModuleException:
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.jav
a:1373)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:468)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleSta
teDriver.java:204)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineD
river.java:37)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStat
eDriver.java:60)
Truncated. see log file for complete stacktrace
java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.ja
va:91)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:1
+12)+
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java
+:173)+
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)
Truncated. see log file for complete stacktrace
Any pointers for the same?
Thanks
GauravIf you are using a Software only Install option, do the following steps after running the db scripts to create tablespace, db owner % app user.
go to ORACLE_HOME\bin\deploy.sh(cmd) and deploy the standard.car , configurations.car (refer to documentation on the syntax)
once successfully deployed start the application server (assuming u followed the documentation for configuring ORM on weblogic)
Maybe you are looking for
-
Album artwork either all mixed up or not showing up at all
All of my albums have the correct artwork in itunes but after i sync it to my ipod touch, most of the albums dont have the covers and some of them have the wrong cover. how can i fix this? I dont remember any of this being a problem until i upgraded
-
How do I complain about waranty and service?
Hello, This forum is my last hope. About a year ago, a friend bought a Lenovo laptop from a store in Spain (been there with work). A few months after he returned home (in Romania), the display broke down, so, we decided, rather than send it to Spain
-
Sales invoice with 100% discount
Hi, Can you tell me if there is a way in SAP where the system allows a ZERO value to reflect in the customer account and the reconciliation account. The scenario is, material A is sold at a price of $100 to customer. A 100% Discount is given and the
-
Issues with Withholding tax on advance paid
Dear Experts Our client deducts TDS on the Advance amount paid and on posting of Invoices from the Vendors. The documents are posted with withholding Tax types configured for this purpose in F-48 and FB60 respectively. Document splitting has been act
-
Adding BPEL to SOA Suite 11gR1 Install
Hi, We did a SOA Suite install 11gR1 (11.1.1.4) install on a Windows 2003 server a couple of month ago, main goal to ramp up a team on Mediator. Now they want to learn/practice with BPEL. Can we add BPEL to the install as this has not been initially