BPM DOMAIN에서 최대로 지원 가능한 인스턴스 갯수는 몇개인가요???

현재 건강보험심사평가원에서 BPM 프로젝트를 진행중입니다.
BPM과 BAM을 연동하는 부분에서 전체 테이블을 밤에다 데이터를 넣기 위해
1분마다 폴링하는 프로세스가 있습니다.
전체 테이블을 폴링하다 보니 테이블에 있는 로우 갯수만큼 인스턴스가 생성이 되고 있습니다.
그래서 최대로 도메인당 최대로 지원이 가능한 인스턴스 갯수가 몇개인지 알려주시길 바랍니다.

혹시나 해서 하나 더 올립니다. 시스템 tuning 관점에서 볼 때는 한 개의 도메인에instance_id 가 많아질수록 Dehydration store의 qurey시간이 오래 걸려 시스템 성능 저하가 발생할 수 있습니다.
purge 시점에 대한 고려나 key를 직접 저장하지 않고 실행하는 개 수등(메시지 사이즈도 고려하여 설정)을 설정하는 것도 꼭 고려하시기 바랍니다.
BPEL Tuning guide : http://download-west.oracle.com/docs/cd/B32110_01/core.1013/b28942/tuning_bpel.htm

Similar Messages

BPM Enterprise - Can's see the Deploy

Hello all
I am new to BPM and i am trying to deploy into bpm enterprise and i hope somebody could help me
I have installed and configured everything needed (weblogic server, bpm enterprise, bpm studio) and i configured and i have created a bpm directory service, bpm domain, etc (using the configuration wizard)
I am trying to deploy a sample proyect. I followed the admin guid and i deployed using Process Administrator --> Proyects, deploy etc (i used the option smart publish)
How can i access my deployed application???
I accessed to workspace application (using the admin account so that i have admin privileges and i can see all the deployments) and i don't see my deploy :(
Am I missing or doing something wrong?
Thanks in advance to all :)

Hi,
In the web based Process Administration tool, add a 'test' participant. Assign this participant all the roles inside your process.
Log into the Workspace using this new participant. If this doesn't work try starting and stopping the Engine from the Process Administration tool.
Hope this helps,
Dan

BPM 11g install and configuration with Webcenter

Hi,
I am new to this BPM so need some help in installation. Where can I download the latest version of BPM 11g and for installating it what steps do I need to follow. Also I need to integrate Webcenter also so for webcenter integration what do I need to install and configure with BPM 11g.
Do I need to install webcenter full suite for integration with BPM and if so can I install both BPM and webcenter in one home iteself. Where can I find some documentation arround installing BPM and configuring with Webcenter.
Thanks

Hi,
Need some info on the install I have to install both SOA BPM 11g 11.1.1.3 and Webcenter 11.1.1.3 on the same box. I have installed the SOA BPM 11.1.1.3 but wanted to find out what is the best option of installing Webcenter 11.1.1.3 as I need to integrat SOA BPM 11g 11.1.1.3 and Webcenter 11.1.1.3. Here is what I think are the options but don't know which one should I go for or is there any other option but the fact is I need to install both on the same box.
*1. Should I install Webcenter in a separate HOME in doing so I will end up installing weblogic again and then install webcenter. Will endup having two ORACLE HOMES one for SOA BPM and one for Webcenter.*
*2. OR should I install Webcenter in the same home as SOA BPM and create a new domain in doing so what happens to some of the components that are installed when installing SOA BPM.*
*3. OR should I just extend the SOA BPM Domain and have both SOA BPM and Webcenter installed in the same domain. I believe this will only add the webcenter components but don't know if there are any issues.*
And help is really appreciated..
Thanks

BPM Organization unit problem

When I tried to preview participant details in order to assign roles or etc in WebConsole application... I am facing the following exception .BPM could not create Human Participant. I am using Hyrid LDAP configuration with OID.
javax.faces.el.EvaluationException: java.lang.NullPointerException
[     (cont)     ] Main:      at com.sun.faces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:130)
[     (cont)     ] Main:      at fuego.jsfcomponents.ui.UIListComponentBase.broadcast(UIListComponentBase.java:61)
[     (cont)     ] Main:      at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:249)
[     (cont)     ] Main:      at javax.faces.component.UIViewRoot.processDecodes(UIViewRoot.java:307)
[     (cont)     ] Main:      at com.sun.faces.lifecycle.ApplyRequestValuesPhase.execute(ApplyRequestValuesPhase.java:79)
[     (cont)     ] Main:      at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:200)
[     (cont)     ] Main:      at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:90)
[     (cont)     ] Main:      at javax.faces.webapp.FacesServlet.service(FacesServlet.java:197)
[     (cont)     ] Main:      at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
[     (cont)     ] Main:      at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
[     (cont)     ] Main:      at fuego.web.filter.CharsetFilter.doFilter(CharsetFilter.java:48)
[     (cont)     ] Main:      at fuego.web.filter.BaseFilter.doFilter(BaseFilter.java:63)
[     (cont)     ] Main:      at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
[     (cont)     ] Main:      at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
[     (cont)     ] Main:      at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
[     (cont)     ] Main:      at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
[     (cont)     ] Main:      at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
[     (cont)     ] Main:      at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
[     (cont)     ] Main:      at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
[     (cont)     ] Main:      at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
[     (cont)     ] Main:      at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
[     (cont)     ] Main:      at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:667)
[     (cont)     ] Main:      at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
[     (cont)     ] Main:      at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
[     (cont)     ] Main:      at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
[     (cont)     ] Main:      at java.lang.Thread.run(Unknown Source)
[     (cont)     ] Main: Caused by: java.lang.NullPointerException
[     (cont)     ] Main:      at fuego.directory.provider.jdbc.JDBCParticipantsAccessor.createHumanParticipant(JDBCParticipantsAccessor.java:200)
[     (cont)     ] Main:      at fuego.directory.provider.jdbc.JDBCParticipantsAccessor.createHumanParticipant(JDBCParticipantsAccessor.java:180)
[     (cont)     ] Main:      at fuego.directory.hybrid.jdbc.DelegatorFuegoParticipantAccessor.updateOrPersistHumanParticipant(DelegatorFuegoParticipantAccessor.java:226)
[     (cont)     ] Main:      at fuego.directory.hybrid.HybridParticipantAccessor.updateHumanParticipant(HybridParticipantAccessor.java:355)
[     (cont)     ] Main:      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[     (cont)     ] Main:      at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
[     (cont)     ] Main:      at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
[     (cont)     ] Main:      at java.lang.reflect.Method.invoke(Unknown Source)
[     (cont)     ] Main:      at fuego.directory.provider.DirectorySessionImpl$AccessorProxy.invoke(DirectorySessionImpl.java:756)
[     (cont)     ] Main:      at $Proxy6.updateHumanParticipant(Unknown Source)
[     (cont)     ] Main:      at fuego.directory.hybrid.HybridParticipantAccessor.fetchHumanParticipant(HybridParticipantAccessor.java:185)
[     (cont)     ] Main:      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[     (cont)     ] Main:      at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
[     (cont)     ] Main:      at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
[     (cont)     ] Main:      at java.lang.reflect.Method.invoke(Unknown Source)
[     (cont)     ] Main:      at fuego.directory.provider.DirectorySessionImpl$AccessorProxy.invoke(DirectorySessionImpl.java:756)
[     (cont)     ] Main:      at $Proxy6.fetchHumanParticipant(Unknown Source)
[     (cont)     ] Main:      at fuego.directory.DirHumanParticipant.fetch(DirHumanParticipant.java:417)
[     (cont)     ] Main:      at fuego.mami.NOrganizationManager.getParticipantById(NOrganizationManager.java:2072)
[     (cont)     ] Main:      at fuego.mami.NOrganizationManager.loadParticipant(NOrganizationManager.java:5442)
[     (cont)     ] Main:      at fuego.mami.NOrganizationManager.getParticipant(NOrganizationManager.java:2037)
[     (cont)     ] Main:      at fuego.webconsole.model.ParticipantFilteredHandler.modifyParticipant(ParticipantFilteredHandler.java:224)
My Configuration file is like the following ;
<?xml version="1.0" encodxxx="UTF-8"?>
<?fuego version="6.1 ALPHA" application="albpmenterprise"?>

<config>
     <object id="person">
          <object-filter>
               <![CDATA[
                    (objectclass=person)
               ]]>
          </object-filter>
          <relative-dn>ou=xxxBANK,cn=Users</relative-dn>
          <attribute id="id" value="uid"/>
          <attribute id="lastName" value="sn"/>
          <attribute id="firstName" value="givenname"/>
          <attribute id="displayName" value="displayname"/>
          <attribute id="mail" value="mail"/>
          <attribute id="telephoneNumber" value="telephonenumber"/>
          <attribute id="employeeId" value="employeeNumber"/>
          <attribute id="thumbnailPhoto" value="thumbnailPhoto"/>
          <attribute id="manager" value="manager"/>
          <attribute id="modifyTimeStamp" value="modifyTimestamp"/>
     </object>
     <object id="group">
          <object-filter>
               <![CDATA[
                    (objectclass=xxxGroupObject)
               ]]>
          </object-filter>
          <relative-dn>
               </relative-dn>
          <attribute id="id" value="cn"/>
          <attribute id="modifyTimeStamp" value="modifyTimestamp"/>
          <attribute id="displayName" value="cn"/>
          <attribute id="name" value="cn"/>
          <attribute id="description" value="description"/>
          <attribute id="assignedParticipants" value="uniquemember"/>
          <attribute id="assignedGroups" value="uniquemember"/>
          <attribute id="ou" value="distxxxuishedName"/>
     </object>
     <object id="ou">
          <object-filter>
               <![CDATA[
                    (objectclass=xxxOUObject)
               ]]>
          </object-filter>
          <relative-dn>
               
          </relative-dn>
          <attribute id="name" value="ou"/>
          <attribute id="description" value="description"/>
     </object>
</config>
I am looking forward to your advice ..
thanks a lot
ilker
Edited by: rernas on 22.Ara.2009 23:35

Hi
1. When you add new Roles, Users to Roles etc from JDev and Deploy it, ONLY for the first time deployment, all these information is added to the Workspace and you can see it in Admin tab of workspace. You should see them in one of the tables of soainfra like BPM_CUBE_ROLE like that. The point is, after first deployment, when you add more users to the same Role, they will not be reflected in Workspace. I guess this was Designed intentionally to avoid overwriting of users with every redeployment. The only way to add more Users or Edit Users for Each Role is from the bpm/workspace application with adminstrator Role.
This makes sense also. Beacause when we develop any BPM Application, all we consider is the Roles names called as Studio Roles (or Swimlanes etc). They are just dummy and virutal Roles. We add all Tasks for each Role. Thats it. Then you Deploy them. And only in Workpace, we map these dummy studio Roles to the real Users from the Security Providers of that SOA/BPM Domain like from default seucrity provider or any external configured AD LDAP etc.
Unless there is a very strong reason, I would not recommend to add Users/Groups etc to the Studio Roles in the JDeveloper itself. Worst case, after you deploy it, if you see any discrepencies, just delete the Roles from workspace admin. Redeploy your bpm app and it will create the new Roles.
Thanks
Ravi Jegga

Problem about Organization Unit and Role in BPM

Hi,
I am developing BPM project which have some roles and will be deployed for many organization. In JDev, I want to assign users to each role and organization and when the project is deployed to WorkSpace, each user in specify org can only manipulate with his task (other user can not visible). I tried configure in Jdev and WorkSpace but it is working incorrecttly
I used BPM, Jdev 11g.
Some body help ?
Thanks.

Hi
1. When you add new Roles, Users to Roles etc from JDev and Deploy it, ONLY for the first time deployment, all these information is added to the Workspace and you can see it in Admin tab of workspace. You should see them in one of the tables of soainfra like BPM_CUBE_ROLE like that. The point is, after first deployment, when you add more users to the same Role, they will not be reflected in Workspace. I guess this was Designed intentionally to avoid overwriting of users with every redeployment. The only way to add more Users or Edit Users for Each Role is from the bpm/workspace application with adminstrator Role.
This makes sense also. Beacause when we develop any BPM Application, all we consider is the Roles names called as Studio Roles (or Swimlanes etc). They are just dummy and virutal Roles. We add all Tasks for each Role. Thats it. Then you Deploy them. And only in Workpace, we map these dummy studio Roles to the real Users from the Security Providers of that SOA/BPM Domain like from default seucrity provider or any external configured AD LDAP etc.
Unless there is a very strong reason, I would not recommend to add Users/Groups etc to the Studio Roles in the JDeveloper itself. Worst case, after you deploy it, if you see any discrepencies, just delete the Roles from workspace admin. Redeploy your bpm app and it will create the new Roles.
Thanks
Ravi Jegga

BPM 11.1.1.6 workspace help

Hi ,
I am just trying to understand the tasks tabs in Oracle BPM workspace, and from Oracle's documentation "Administrative Taks" tab should only be visible to a user who belongs to a BPMProcessAdmin Or ProcessOwner role. But When I create a BPM domain from scratch and try to create a user without doing any role assignments, I can still see this tab , when I try to login to BPM workspace using this newly created user. So far this domain does not even have any BPM processes deployed nor any other userd/roles defined explicitely for BPM. Could there be any other reason ? Please enlighten me if I am missing something really fundamental here.
Version : Oracle BPM 11.1.1.6
Thanks in Advance.
Edited by: 934070 on 13-May-2012 23:06

Hi
I am glad your original issue is resolved. For this new SOA installation, you can post a new thread and preferably in SOA Forums and not here in WLS Forums for quicker response: SOA Suite
1. To begin with, looks like you have a 64 bit machine, so I would recommend first to install 64 bit JDK. Then install Weblogic using weblogic generic installer (.jar). This means if you already have WLS installed using .exe, you may have to delete that and start over.
2. Worst case even if you want to continue as it is (32 bit), the location of java is kind of not ok having a space in one of the folder names like "Program Files". And is this java installed by you or did it came with machine and if so. If came with machine it will be older version.
I would recommend, uninstall existing JDK and install fresh latest JDK in a path something like shown below that do not have any spaces:
1. C:\Oracle\Java\jdk1.6.0_24_64Bit = Will have JDK 64 bit
2. C:\Oracle\Middleware116BPM = Will have WLS 10.3.6. Here you install SOA later on
3. C:\Oracle\Middleware\Jdeveloper116 = Will have JDeveloper 11.6 installed here.
Now, coming to your actual installation error, do NOT use this command "setup -jreLoc %JAVA_HOME%". Instead just double click on Setup.exe or open a dos window, navigate to that folder and just type setup.exe. The point is do not give -jreLoc. NOW it will prompt to enter full JDK Path. Here you carefuly type full jdk path something like this "C:\Oracle\Java\jdk1.6.0_24_32Bit" (this is on my side...). It should work now.
Caution. While installing any oracle software do not use folder names with spaces. Like c:\Program Files\ etc. Spaces in folder names may be an issue. So avoid that.
Since you are starting all this fresh, I would recommend doing it in the right and correct way to avoid any future issues. It may take few hours of extra time that is totally worth.
Re: Weblogic 10.3.5 install on Windows
Thanks
Ravi Jegg

BPM 11g

Dear All,
I am working on BPM 11g.
I installed the following products for BPM 11g
OS: Windows 7 SP1 Professional Edition all with 32 bit
Installed s/w:
    JDeveloper 11.1.1.6.0 Generic Version
    OracleXE 11.2 Win32
    ofm soa generic 11.1.1.6.0
    wls 10.3.5
    RCU 11.1.1.6 for schemas dev_soainfra, dev_sdpm and dev_mds - Utility run successfully.
Overall Installation is successful wth no issues.
Configuration of Weblogic server for domain is ok with admin server, soa_server1 and bam_server1 with test connections is ok.
I am using browser as Internet Explorer 9
After starting weblogic server and soa_server1
the URL for BPM composer and BPM Workspace
works with
Oracle BPM Workspace .......... http://localhost:8001/bpm/workspace
Oracle Process Composer ....... http://localhost:8001/bpm/composer
and not works with (recommended from Oracle Training perspective)
Oracle BPM Workspace .......... http://localhost:7001/bpm/workspace
Oracle Process Composer ....... http://localhost:7001/bpm/composer
why the 7001 port does not work for BPM composer ?
In Jdeveloper 11.1.1.6.0 after creating application, project and process
From BPM MDS Navigator I configured the connection for Database 11g XE as well using
Override Application Server user/password
For SOA MDS I included the dev_mds user with MDS partition as obpm
tested connections all ok (weblogic and soa_server1 up and running)
In the BPM Project Navigator when I use the Project --> SalesQuote.jpr --> right clicking with
option as Save to BPM MDS the following error is occured as
"Error while saving BPM Project to MDS: BPM-70801 : Metadata operation failed".
If the error is resolved than I can see the project in BPM composer.
My queries on this error are
1) Has soa_server anything to do with this error
2) Is dev_mds schema to be reviewed
what can be the possibility to resolve the BPM-70801 error.
Please provide the solution ASAP or send me the reply to my [email protected]
Regards
Ajaz Ahmed

Hi Ravi,
Many Thanks for my query responses.
I am putting my thoughts and clarifications as per your solutions.
1. AdminServer running at 7001, soa_server1 at 8001 and bam_server1 at 9001 is clear and ok.
2. Port 7001 will NOT work since none of the soa modules are deployed to this server port. - ok
3. Very simple. From domain/config folder open config.xml file and search for workspace or composer and see that   XML section. The value for <target> tag will tell you exactly where that module is deployed and only on that you can use it.
My thoughts : What I understand for config.xml in domain/config folder has information on the domains configured
with SOA_Server1, BAM_server1 and Weblogic server with port numbers and file path. (while configuring domain I selected the check box for SOA_suite, BPM_suite 11.1.1.0 Instead of SOA_suite and BPM_suite for developers checkbox).
Please confirm if this selection is correct for BPM composer. What does module deployed means.
4. Coming to your Training session, it is possible that they had just ONE SINGLE server that acts as Admin and SOA Server. Yes, this is possible. When you create a BPM Domain using config wizard, there is an option like Developers domain like that and thats when you will have just one server at port 7001 that has all soa modules also deployed. That is why in your training they may have used port 7001 for workspace or composer.
My Thoughts : I have everything configured on my laptop which acts as server and client. Do you mean I have to configure the wizard again and Include SOA_suite for Developers and BPM_suite for developers. 7001 weblogic server is clear to me.
Now, coming to setting up composer, it should work. Try not to choose the option to override server name and password. We do not need this. Just select the existing details. You should be able to export to MDS Repository.If you still get errors, please let me know.
I am able to export the BPM project succesfully to save my Salesquote to the required location with extension as
.exp. This is OK. I do not have any problems while exporting BPM Project. I am having problems with
Save to BPM MDS
My current issue is
In the BPM Project Navigator when I use the Project --> SalesQuote.jpr --> right clicking with
option as Save to BPM MDS the following error is occured as
"Error while saving BPM Project to MDS: BPM-70801 : Metadata operation failed".
If the error is resolved than I can see the project in BPM composer.
I am still facing this error BPM-70801. Please help me to resolve this error
Thanks
Ajaz Ahmed

Problem about Triggering BPM and Process monitor

Hi all,
I am new on the BPM domain. Now i got some problem working on it.
First, i want to execute a FM or Program in ECC, and then trigger the process of BPM, how to do this?
or maybe i can say like this, i want to start a BPM from ECC screen, how could i do?
Second, the requester could find the completed tasks in UWL with some simple text only,
if he wants to see the whole process status, is that possible?
Regards,
Fisher

Hi Harsha,
Thx for your reply.
For First, is the URL which in Process Repository, after clicking "start process", something like "http://www.example.org/bpem/..... "?
but seems i cannot open the URL for detail XML data. Could you give some more details?
For Second, go to UWL page, in Tasks tab, choose "completed tasks" in first dropdown box, you can get the task list then.
And it returns only "priority, completion date, status".
If the task is in progress, yes, process visualization will picture the state of the process.
But my customers (requesters), not admin, want to see the diagram after they submit, with status better. Any suggestion?
Regards,
Fisher

Migrating Papi heavy app to BPM 11g

Hi,
I have a BPM 10G app that uses external tasks a lot and the external UI makes heavy use of Papi. I don't mind rebuilding the process from scratch in 11G, but I'd like to keep my UI as is, or worst case scenario replace the Papi layer in it (thankfully nicely abstracted!). Is there anything like Papi in 11g, I have noticed that Human Workflow has an API, but I'm still trying to understand why this appears to go through BPEL to get to BPM, can I use this?
You may have guessed that I'm from a BEA/BPM background, not an Oracle/BPEL one! If anyone can provide a good and clear explanation as to how these components fit together, I'd be grateful - can't find a concise overview in Oracle docs at the moment.

Hi
1. This is possible and it should work. We can always change the backend soa schema instances from one db to another db. All we do is, modify the DataSources used on the Domain side to update with new db host, port, sid etc either in jdbc .xml files or from weblogic console.
2. I don't think, Oracle has any tools to move soa infra schemas from one db to another db. If we think logically, it more of DB Data Migration from One Env to another Env. So you need a good DB Tool to migrate all the schemas from one env to another.
3. Custom DB has nothing to do with the SOA Schemas. You may have some data refernces between these 2. But thats ok. You can retain or move custom db also, as far as you update those DataSources also on your SOA Domain side.
Proper DB tool, with good migration should work fine. We did the same a while back. Infact we did much more complex stuff. Originally we had all our soa schemas in single db instance and used this on BPM Domain. After a while, we decided to move back end soa into a Clustered Oracle RAC database with 2 nodes in totally different host, port etc. So we migrated all existing data into a 2 node rac database. Then On Weblogic BPM Domain side, since we used RAC, we had to create 2 normal data sources (for each node) and 1 multi data source to combine these 2. And it all worked fine. We first tested in dev and other ENV before moving to Prod though.
Bottom line, Oracle may not have tools to migrate. Use good DB Tools to migrate like db dump etc. Test in non prod Env and it should work fine.
Thanks
Ravi Jegga

BPM Composer and custom authenticator

Hello experts,
We are using BPM Suite release 11.1.1.4 and we have setup a custom database authenticator for the BPM domain. After following the steps described in the [forum post|http://forums.oracle.com/forums/thread.jspa?messageID=9428626] we have managed to connect successfully to the BPM workspace using administrative rights. Nevertheless, it is not possible to retrieve any projects in the bpm composer page (/bpm/composer), by using any account at all. In all cases, the help page appears and user cannot proceed to any actions.
Could you please suggest any configuration, role assignment or any other workaround for enabling users coming from a custom database authenticator to work on the bpm composer environment?
Many thanks in advance,
Serafeim.

Never mind. I solved this problem. Just need to ensure all the authenticator control flag set to SUFFICIENT.

Unable to export BPM Project

I'm on Jdeveloper 11.1.1.6.0 and have installed the plugin bpm-jdev-extension.zip and have successfully created a BPMN process. I've been able to deploy the composite and it works great.
However, I'd like to be able to export the project in Jdeveloper. When I go to the export option, the only item I see is "UML as XMI".
It doesn't give me the option to export the BPM project.
Any ideas?
Thanks,
Mike

Hi Mike
I am little bit confused. What exactly do you want to Export. Like your entire application to some other machine. Or you want to deploy this application on some other soa/bpm domain. If so, then you need to get JAR for your workflow project and EAR for all the rest of the things. Incase if you already deployed this once to any domain, then under your application root folder/deploy folder, look for any EAR or JARs. Just take those and deploy to any other soa domain. Generally under your workflow project also you should see a folder named deploy and under this see a workflow jar sca_MyProcess_rev1.0.jar. While deploying if you choose option to include all taskdetails also in the same jar, you will have only one deployment file. Just take this and deploy to any other soa domain.
If you want to export the source code itself, you can copy the entire application folder and move to any other jdeveloper folder or other machine.
For any application/project in JDeveloper, you can go to properties for that -> Deployments -> and create any new Deployments you want like JAR, EAR, WARs etc.
Thanks
Ravi Jegga

BPM Not found

Installed Oracle VMBox - no problem.
Then installed SOA & BPM Development VM in the VMBox - no problem. Have run JDev, built simple SOA composite, deployed, tested - no problem. All, to this point works as expected.
However, when enter the URL http://localhost8001/bpm/composer or select the BPM Composer button, comes back saying it cannot find BPM (Error 404--NotFound). What has to be done to run BPM from the virtual install?
Thanks - Casey
Edited by: Caseyinal on Oct 30, 2012 8:06 PM
Edited by: Caseyinal on Oct 30, 2012 8:12 PM

Hi Casey
Open your config.xml file from your bpmDomain/config folder and see if you find these 2 entries. Just search for "composer" word. Looks like there are 2 composers: soa and bpm, with urls like shown below. I tested and they both opened fine and I logged in with domain admin username/password:
http://soaserverhost:8001/bpm/composer
http://soaserverhost:8001/soa/composer
If you do not find these entries, then for quick testing, see if you can manaully deploy these 2 modules from below location. If found, then look for any errors in the log files.
<app-deployment>
    <name>composer</name>
    <target>soa_server</target>
    <module-type>ear</module-type>
    <source-path>/myhome/Oracle/Middleware/Oracle_SOA1/soa/applications/soa-composer.ear</source-path>
    <deployment-order>315</deployment-order>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
</app-deployment>
<app-deployment>
    <name>BPMComposer</name>
    <target>soa_server</target>
    <module-type>ear</module-type>
    <source-path>/myhome/Oracle/Middleware/Oracle_SOA1/soa/applications/BPMComposer.ear</source-path>
    <deployment-order>384</deployment-order>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
</app-deployment>I did not do anything special for composer to work. Just create a BPM Domain with bpm facets, select Enterprise Manager and thats it.
Thanks
Ravi Jegga

Webcenter BPM spaces tries to connect to localhost:8001

Hi,
I got two 11.1.1.7 domains, one with webcenter ( discussions,portlet,spaces) together with ucm and a soa, osb bpm domain.
both got its own server and rcu ( not on 1 server ).
I followed this guide and got it BPM workspace spaces successful deployed on the wc spaces server. All soa foreign ejb links and datasources are working
Configuring Oracle WebCenter Portal - 11g Release 1 (11.1.1.7.0)
Soa/bpm is also working and also tested the identity service.
Now I want to log in to webcenter spaces and this gives me errors ( lookupuser operation of the identity service).
I used wireshark and add some extra fmw logging to the soa server and it shows the wc user is authenticated on the soa server
after that I enabled the http logging on the webcenter server and I see that the wc spaces container ( bpm login bean) sends a http request to the localhost:8001 and not to the soa server address.
Does someone knows where I can find or change this localhost address , I already search the config domain folder and the mds database.
Thanks

iStatmenus ?

BPM 11.1.1.7 Document Storage Bug

Hello,
I've installed SOA and BPM 11.1.1.7.
I am working on the OnBoarding process from https://java.net/projects/oraclebpmsuite11g/pages/Demos.
It works fine until I enable the UCM Document package: I check the "Use document package", in the Document tab of the Human Task (in JDev), as described in the Oracle Doc.
I rebuild the application and redeploy it.
Then, when I try to attach a document in the BPM Workspace, I get the same "Add attachment" window as before the change, and when I click to add a desktop file I get the error:
JBO-25058: Definition storageType of type Attribute is not found in ViewDefattachmentType74_276.
Would you have already encountered such a bug and how to fix it?
SOA was installed on the same server as UCM 11.1.1.7 and the UCM domain was extended with the SOA and BPM domain.
I am using Jdev 11.1.1.7+SOA/BPM plugin 11.1.1.7.0.0.8
Thanks in advance for your clues,
Vince

Hi! It's not a bug....I guess. The problem is in ADF form from older version SOA Suite in what OnBoarding process was created. To fix this just recreate UIs apps in HumanWorkflow configure page in JDev (use automatic). Then configure UCM: Webcenter UCM Integration PS5 | James Smith&#039;s Blogs
Regards,
Vadym

BPM 11g workspace not show user from OVD - top most authentication provider

Hi,
We have added OVD which connected to LDAP as the top-most authentication provider for myrealm. The order of the providers are:
(1) OVD (control Flag:SUFFICIENT)
(2) DefaultAuthenticator(control Flag: REQUIRED)
(3) DefaultIdentityAsserter
The users and groups from the OVD are displayed in the weblogic console and are searchable in the OEM when I want to add the user/group to the application role but not in the BPM workspace. I find a related thread:
Weblogic administrator account is inactive after enabling DB Authenticator
It seems I did the same but I am still able to login bpm workspace with weblogic id. I guess my BPM does not use OVD for the Authenticator at all and it is still using DefaultAuthenticator. Can anyone please help and let me know what I missed for the setting? Should I put DefaultIdentityAsserter to the 2nd in the provider list to solve this?
Thanks,
Helen
Edited by: Helen on Mar 22, 2011 7:31 AM

Hi Helen
Make sure that for the second Authenticator (DefaultAuthenticator) the required Flag is SUFFICIENT. From Weblogic point of view, if it is required, this means that user should and must exist in this provider also. Since you configured external LDAP and say you have something like "mytestuser" in LDAP. I guess you already added this user "mytestuser" to the BPMWorflowAdmin role as per the forum you listed below. But this user may not and will not exist in the default authenticator. So try making it sufficient and see if that works.
As mentioned in my earlier post, I do have LDAP cconfigured to my BPM Domain and this is the first in the order of providers. I added a user from this LDAP into workflow admin role in em. I could login into bpm/workspace and see adminstrator link.
Thanks
Ravi Jegga

BPM DOMAIN에서 최대로 지원 가능한 인스턴스 갯수는 몇개인가요???

Similar Messages

Maybe you are looking for