BPM: error at exactly 2500 messages after message split: no coincidence?

Hi everybody,
we poll a message, split it in BPm and than call a WebService.
We got an error exactly after 2500 messages were processed successful.
Is there a special parameter which influences the BPM?
Thanks a lot
Regards Mario

Hi,
In SXMB_ADM you can set the time out higher for the sync processing.
Go to Integration Processing in SXMB_ADM and add parameter SA_COMM CHECK_FOR_ASYNC_RESPONSE_TIMEOUT to 120 (seconds). You can also increase the number of parallel processes if you have more waiting now. SA_COMM CHECK_FOR_MAX_SYNC_CALLS from 20 to XX. All depends on your hardware but this helped me from the standard 60 seconds to go to may be 70 in some cases.
Make sure that your calling system does not have a timeout below that you set in XI otherwise yours will go on and finish and your partner may end up sending it twice
when you go for BPM the whole workflow
has to come into action so for example
when your mapping last < 1 sec without bpm
if you do it in a BPM the transformation step
can last 2 seconds + one second mapping...
(that's just an example)
so the workflow gives you many design possibilities
(brigde, error handling) but it can
slow down the process and if you have
thousands of messages the preformance
can be much worse than having the same without BPM
see below links
http://help.sap.com/bp_bpmv130/Documentation/Operation/TuningGuide.pdf
http://help.sap.com/saphelp_nw04/helpdata/en/43/d92e428819da2ce10000000a1550b0/content.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/3.0/sap%20exchange%20infrastructure%20tuning%20guide%20xi%203.0.pdf
BPM Performance tuning
BPM Performance issue
BPM performance question
BPM performance- data aggregation persistance
Regards
Chilla..

Similar Messages

  • BPM Error during delivery of message

    Hi All,
    I am working on BPM Scenario, to collect the files based on Correlation Id.
    Its working file in PROD, Last 2 days back we processed 20 message, 4 was not processed. Data looks good, and i am trying to process those 4 records.
    I am getting the below error in SMQ2.
    SysFAIL - >Permanent error in BPE inbound processing -> Display Trace: 193     385     20091008225338.6300000     DATA     SWF_INB     EXCEPTIONS          WF-BATCH     X     Error during delivery of message BDAAD94EA8454FA005F1A2C9416843DC to receive processes     WS90100038     XBQO$PE_WS90100038     BDAAD94EA8454FA005F1A2C9416843DC
    I cleared the SMQ2 and SWWL, and reprocessed the file, still i am getting same error...
    SXMB_MONI_BPE - > Continoue Process flow after error nothing is displayed...
    Any cause, i am getting the error???
    Thanks,
    SR

    Hi Siva,
      Normally this error occurs when your data not sufficient,check your data its correct or not,i think its not satisying your condition / corealtion what you defined in BPM.
    Regards,
    Raj

  • Problem in message splitting...

    Hi All,
    I am using a BPM iwhere i am doing message splitting by using a transformation step, after this transformation step i kept one loop to collect and process this splitted messages... but first message from splitted messages only gets into loop and processed.... rest of messages are not getting out of transformation or they are not getting into loop.... can anybody help me out that how i send rest of splitted messages into loop.
    Thanks in advance..
    Srinvas.

    Hi,
    What kind of collection pattern are you using?
    Regards
    Ivan

  • Message Split without BPM - Error

    Hi,
    I am creating a message split scenario without BPM as per weblog <a href="/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible Split without BPM</a>
    I am able to receive message in XI but after that it shows error in Integration engine.
    Error Category : MAPPING
    Error Code : GENERIC
    I am able to see the message in SXMB_MONI with error
    <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="MAPPING">GENERIC</SAP:Code>
      <SAP:P1>No messages created from split mapping</SAP:P1>
    Please advice.
    Thanks,
    Sri.

    Hi Venkat,
    I am not able to see sub-groupid in sxmb_moni.
    Please see below the contents from sxmb_moni trace.
    ============================
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Request Message Mapping
      -->
    - <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
      <Trace level="1" type="T">Party normalization: sender</Trace>
      <Trace level="1" type="T">Sender scheme external = XIParty</Trace>
      <Trace level="1" type="T">Sender agency external = http://sap.com/xi/XI</Trace>
      <Trace level="1" type="T">Sender party external =</Trace>
      <Trace level="1" type="T">Sender party normalized =</Trace>
      <Trace level="1" type="T">Party normalization: receiver</Trace>
      <Trace level="1" type="T">Receiver scheme external =</Trace>
      <Trace level="1" type="T">Receiver agency external =</Trace>
      <Trace level="1" type="T">Receiver party external =</Trace>
      <Trace level="1" type="T">Receiver party normalized =</Trace>
      <Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=entry</Trace>
      <Trace level="1" type="T">COMMIT is done by XMB !</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
    - <!--  ************************************
      -->
      <Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
    - <!--  ************************************
      -->
      <Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
      <Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />
      <Trace level="1" type="T">****************************************************</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">XMB entry processing</Trace>
      <Trace level="1" type="T">system-ID = QN7</Trace>
      <Trace level="1" type="T">client = 100</Trace>
      <Trace level="1" type="T">language = E</Trace>
      <Trace level="1" type="T">user = XIAFUSER</Trace>
      <Trace level="1" type="Timestamp">2006-04-18T05:51:20Z CET</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">****************************************************</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">Message-GUID = 67F58830CE9E11DA91CD00111120E6DB</Trace>
      <Trace level="1" type="T">PLNAME = CENTRAL</Trace>
      <Trace level="1" type="T">QOS = EO</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
      <Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
      <Trace level="1" type="T">Queue name : XBTI0002</Trace>
      <Trace level="1" type="T">Generated prefixed queue name = XBTI0002</Trace>
      <Trace level="1" type="T">Schedule message in qRFC environment</Trace>
      <Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="T">Going to persist message</Trace>
      <Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
      <Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
      <Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
      <Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
    - <!--  ************************************
      -->
      <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
      <Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
      <Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
      <Trace level="1" type="T">system-ID = QN7</Trace>
      <Trace level="1" type="T">client = 100</Trace>
      <Trace level="1" type="T">language = E</Trace>
      <Trace level="1" type="T">user = XIAFUSER</Trace>
      <Trace level="1" type="Timestamp">2006-04-18T05:51:20Z CET</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
      <Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
    - <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
    - <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
      <Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
      <Trace level="1" type="T">Cache Content is up to date</Trace>
      </Trace>
      </Trace>
      </Trace>
      </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
    - <Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
    - <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
      <Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
      <Trace level="1" type="T">Cache Content is up to date</Trace>
      </Trace>
      </Trace>
      </Trace>
      </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
      <Trace level="1" type="B" name="PLSRV_RECEIVER_MESSAGE_SPLIT" />
    - <!--  ************************************
      -->
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
    - <!--  ************************************
      -->
      <Trace level="1" type="B" name="CL_XMS_PLSRV_RECEIVER_SPLIT-ENTER_PLSRV" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">number of receivers: 1</Trace>
      <Trace level="1" type="T">Single-receiver split case</Trace>
      <Trace level="1" type="T">Post-split internal queue name = XBTO6___0000</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="T">Persisting single message for post-split handling</Trace>
      <Trace level="1" type="T" />
      <Trace level="1" type="T">Going to persist message + call qRFC now...</Trace>
      <Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
      <Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
      <Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
    - <!--  ************************************
      -->
      <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
      <Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
      <Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
      <Trace level="1" type="T">system-ID = QN7</Trace>
      <Trace level="1" type="T">client = 100</Trace>
      <Trace level="1" type="T">language = E</Trace>
      <Trace level="1" type="T">user = XIAFUSER</Trace>
      <Trace level="1" type="Timestamp">2006-04-18T05:51:20Z CET</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
      <Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
      <Trace level="1" type="T">Start with pipeline element PLEL= 5EC3C53B4BB7B62DE10000000A1148F5</Trace>
      <Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST" />
    - <!--  ************************************
      -->
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
    - <!--  ************************************
      -->
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
    - <!--  ************************************
      -->
      <Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">Mapping-Object-Id:29EB87F0231C357A8336DDEBD574EEAB</Trace>
      <Trace level="1" type="T">Mapping-SWCV:0CF1E1E0C5FC11DABCB9E4A50A07012B</Trace>
      <Trace level="1" type="T">Mapping-Step:1</Trace>
      <Trace level="1" type="T">Mapping-Type:JAVA</Trace>
      <Trace level="1" type="T">Mapping-Program:com/sap/xi/tf/_MM_filesplit_without_bpm_</Trace>
      <Trace level="1" type="E">CL_XMS_PLSRV_MAPPING~ENTER_PLSRV</Trace>
      </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
      <Trace level="1" type="System_Error">Error exception return from pipeline processing!</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
    - <!--  ************************************
      -->
      </SAP:Trace>
    Thanks,
    Sri.

  • Multi-Mapping and Message Split using BPM UDFs Error

    hi
    As per the below blog
    Illustration of Multi-Mapping and Message Split using BPM in SAP Exchange Infrastructure
    I have just modified the UDFs(1.selectnodeifA 2.selectNodeifB)
    1.selectnodeifA
    for(int i=0;i<=n;i++)
    if(Name<i>.equals("A"))
    result.addValue(Node<i>);
    2.selectNodeifB
    for(int i=0;i<=n;i++)
    if(Name<i>.equals("B"))
    result.addValue(Node<i>);
    while checking I am getting the following errors
    Source code has syntax error: 
    D:/usr/sap/D10/DVEBMGS01/j2ee/cluster/server0/./temp/classpath_resolver/Mapdc8fa4d0896011dd907d001cc01cef0d/source/com/sap/xi/tf/_bpm_mm_.java:132: cannot resolve symbol
    symbol : variable n
    location: class com.sap.xi.tf._bpm_mm_
    for(int i=0;i<=n;i++)
    ^
    D:/usr/sap/D10/DVEBMGS01/j2ee/cluster/server0/./temp/classpath_resolver/Mapdc8fa4d0896011dd907d001cc01cef0d/source/com/sap/xi/tf/_bpm_mm_.java:140: cannot resolve symbol symbol : variable n
    location: class com.sap.xi.tf._bpm_mm_
    for(int i=0;i<=n;i++)
    ^
    2 errors
    The source code given in the blog is correct ? I thought for loop has not completed
    pls help
    manian

    Hi manian,
    I was having a look to Illustration of Multi-Mapping and Message Split using BPM in SAP Exchange Infrastructure blog.
    The functions are not the same. I mean, yours and blogs functions.
    Each function has two parameters, Name and node. Furtheremore, in the blogs' functions is using arrays and you don't.
    So, the right code will be
    1.selectnodeifA
    for(int i=0;i<=node.length();i++)
    if(Name<i>.equals("A"))
    result.addValue(Node<i>);
    However, if you don't need an advance user defined function as you want to process just one element of the node's queue, you will not need to use for sentence.
    Something like:
    1.selectnodeifA
    // for(int i=0;i<=n;i++)
    if(Name.equals("A"))
    result.addValue(Node);
    Hope it is usefull for you.
    Carlos

  • Here is the message my Iphone 4 is stating "Error no successful firmware download after 60000 ms!! Giving up..."Itunes will not even recognize it, any ideas?

    Here is the message my IPhone 4 is stating, "Error no successful firmware download after 60000 ms!! Giving up..."ITunes will not even recognize it, any ideas?

    No, it has something to do with the firmware on the phone itself. The phone won't do anything. I have used redsn0w to try and put the firmware back on, no luck though. The farthest I am able to go is DFU mode. The message on the screen says, "Error no successful firmware download after 60000 ms!! Giving up..."

  • HT5654 iTunes was not installed correctly. Please reinstall iTunes. Error 7 (windows error 126). This message appears when attempting to open iTunes even after reinstall?

    iTunes was not installed correctly. Please reinstall iTunes. Error 7 (windows error 126). This message appears when attempting to open iTunes even after reinstall?

    Repair Apple Application Support.
    START/CONTROL PANEL/PROGRAMS N FEATURES/highlight APPLE APPLICATION SUPPORT, then click the REPAIR button

  • I try to send emails after I have recieved. They are hotmail accounts. message says"cannot send mail and error occurred delivering this message.  I have tried deleting and restarting. I have tried shutting phone down completely and restarting.  no help...

    I am trying to send emails via a hotmail account on my i phone 5 and get the following message despite recieving e mails.  "cannot send mail an error occurred delivering this message"...   i have tried to restart phone to no avail. I have tried to delete and re input account to no avail.  I need help

    Hello lclaunch22
    You may need to validate the account with Hotmail. When logged in to the Hotmail account on a computer, there are instructions on how to do this.
    iOS: Setting up Hotmail, Outlook, Live, or MSN email accounts
    http://support.apple.com/kb/ht1694
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • What is the "Error! Check Authorization" message and why does my Digital Editions crash right after that pops up?

    I have authorized the Adobe Digital Editions with both my PC and my eReader. I try to download a library book and I get the "Error! Check Authorization" message. My Digital Editions will then crash.

    Hello,
    Please download the latest ADE 4.0.3.114137
    http://www.adobe.com/solutions/ebook/digital-editions/download.html
    Some of the crashes have been fixed in this release.
    Thanks for being the part of product improvement.

  • Message splitting 1:n without BPM error : 404   Not Found

    hi,
    is u r server is updated with sps14
    please once check this.. may be this is the problem
    Thanks,
    Madhav.
    Note:points if useful

    hi,
    please go through the limitation of this bolg
    A mapping-based message split will ultimately produce n individual messages, but not until it reaches the Adapter Engine (AE). Inside the Integration Engine (IE), the messages are grouped together and persisted as one bulk message. The bulk message is sent to the AE where it splits the bulk message into individual messages and persists them.
    Restrictions
    u2022  Messages that result from the split in a mapping-based message split are sent using one AE. So only adapters running on the AE are supported. In particular, this means that target IDOC/HTTPmassagee splits are not supported since the IDOC/HTTP adapter is not part of the AE.
    u2022  The target system of the message splits cannot be an integration process.
    u2022  Attachments from the original message are not appended to the messages resulting from the message split.
    now i think u wont be able to send the the 2 diffrent file in diffrent location.both the file cab be sent to be togethre.because when u configure the receiver determination in ID u need to include both receiver service as a receiver.and thus u need to configuer 4 interface determinatio as well as 4 receiver aggrement. this is because you r using the only one IM which containg both the interface.
    regards,
    navneet

  • How to make a BPM restartble at a specific point after error?

    Hi,
    I have a somewhat very simple question.
    I have a BPM that works like this:
    1. receive message A
    2. transform message A to message B (using valuemapping)
    3. switch with a condition determining if valuemapping was succesfull for all cases.
    3.1. Branch 1
    3.1.1. Send message B to R/3
    3.2. Branch otherwise
    3.2.1. Transform message B to errorMessage
    3.2.2. Send errorMessage to R/3
    This is all fine and works as intended.
    Now what I would like is to somehow be able to "stop" the BPM after step 3.2.2. and somehow be able to reprocess the BPM starting from step 2..
    The reason for this is that if the valuemapping was unsuccesfull it means a table needs to be updated. After updating the table it would be nice if the process could just be restarted and complete with success instead of having to send data through XI once again from sending system.
    I've tried to experiment with exception handling in the BPM, but have not been successfull in finding a solution that works as intended.
    Hope someone can help:-)
    Best regards,
    Daniel

    Hi Kavita,
    What I want is this:
    If valuemapping is unsuccesfull I want to send errorMessage to R/3. Afterwards the BPM should stop. At some point someone (or XI ifself) will try to reprocess the BPM. In this case the BPM should basically start from my previous step 2 (Transformation step with valuemapping) and then go through it all again.
    I a litle unclear what exactly you want me to try - is it something like this you mean?: - but what exactly goes in the exception branch? The time part I guess can be left out in my case, since I just wanna stop right away - but still we the posibility of starting from valuemapping step when reprocessing the BPM after error.
    1. receive message A
    2. Block
    2.1. Exception branch
    2.2. Control branch
    2.2.1. Loop
    2.2.1.1. transform message A to message B (using valuemapping)
    2.2.1.2. switch with a condition determining if valuemapping was succesfull for all cases.
    2.2.1.2.1. Branch 1
    2.2.1.2.1.1. Send message B to R/3
    2.2.1.2.2. Branch otherwise
    2.2.1.2.2.1. Transform message B to errorMessage
    2.2.1.2.2.2. Send errorMessage to R/3
    Best regards,
    Daniel

  • Error while processing audit message

    hi
    I'm running a reconciliation, and throws me the following error .
    please help me
    ERROR,28 Aug 2009 03:50:32,492,[XELLERATE.AUDITOR],Error while processing audit message
    java.lang.NullPointerException
    at com.thortech.xl.audit.engine.AuditEngine.processSingleAudJmsEntry(Unknown Source)
    at com.thortech.xl.audit.engine.AuditEngine.processOfflineNew(Unknown Source)
    at com.thortech.xl.audit.engine.jms.XLAuditMessageHandler.execute(Unknown Source)
    at com.thortech.xl.schedule.jms.messagehandler.MessageProcessUtil.processMessage(Unknown Source)
    at com.thortech.xl.schedule.jms.messagehandler.AuditMessageHandlerMDB.onMessage(Unknown Source)
    at sun.reflect.GeneratedMethodAccessor26.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
    at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
    at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
    at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
    at com.evermind.server.ejb.interceptor.system.SetContextActionInterceptor.invoke(SetContextActionInterceptor.java:44)
    at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
    at com.evermind.server.ejb.interceptor.system.RunAsInterceptor.invoke(RunAsInterceptor.java:31)
    at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
    at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
    at com.evermind.server.ejb.MessageDrivenConsumer.onMessage(MessageDrivenConsumer.java:347)
    at com.evermind.server.ejb.MessageDrivenConsumer.processMessages(MessageDrivenConsumer.java:233)
    at com.evermind.server.ejb.MessageDrivenConsumer.run(MessageDrivenConsumer.java:169)
    at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:298)
    at java.lang.Thread.run(Thread.java:595)

    Seems like Article ID: 864906.1
    Cause
    The cause of this problem is, the entries in aud_jms table which were not processed
    after run "Issue Audit Messages Task" schedule task are not complete audit entries.
    Solution
    1. Run the following query.
    select IDENTIFIER from aud_jms where aud_class='UserProfileAuditor'
    IDENTIFIER is the usr_key.
    Save the output of above query into text file. lets say a.txt, the a.txt will looks like........
    a.txt
    122896 122896 122997 122999 122999
    122986
    122997
    2. Delete the all entries (rows ) from aud_jms table
    3. Run the GenerateSnapshot.sh/GenerateSnapshot.bat using following parameter.
    GenerateSnapshot.bat -inputFile E:\OIM9101\XLServer\xellerate\bin\a.txt -missingSnapshots -username xelsysadm -password xelsysadm -numOfThreads 2
    Where E:\OIM9101\XLServer\xellerate\bin\a.txt is the location of text file which is created in Step1.
    4. Run the "Issue Audit Messages Task" schedule task

  • Error in local system;message is not complete--- in Solman 4.0

    Hello Solman Gurus,
             After importing SP 13 in Solution Manager 4.0 , whenever i am trying from help--> create support message ; i am getting "ERROR IN LOCAL SYSTEM; MESSAGE <MSG NO> IS NOT COMPLETE "
    i have seen these threads
    ERROR when Trying to create support message in satellite system
    ERROR when Trying to Create Support Message in Satillite system
    create support message
    but they are saying about Satelliate system not solman
    Please help if you could
    regards
    Naveen

    Naveen,
      Check if the UserId that is creating the message in SolMan via Help->Create Support Message has roles SAP_SUPPDESK_CREATE and SAP_SV_FDB_NOTIF_BC_ADMIN (the profiles of the roles must be generated, all the authorization objects should be green).
      I have SolMan 4.0 SP 13 too, when I delete these authorizations from my userid, I have the same error.
    Let me know if you still have the error.
    Regards,
    Raquel.

  • Using FF to access my AOL emails I get "There was an error while loading the message. Please try again later." Access is OK via Chrome, IE & AOL's own desktop.

    "There was an error while loading the message. Please try again later." is a recent (3/4 days) error message I get when accessing my AOL emails. I can access the page and move them between states but cannot open them to read. Chrome, IE and AOL's own desktop open emails OK & can access them from the wife's PC using my AOL details. Have cleaned the history tab of everything in FF, have also removed it with add/rem progs and reinstalled - still I get the above message.
    PC - W7 Pro 64 bit, 16GB RAM etc.

    Hello,
    Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
    #Delete the Firefox installation folder, which is located in one of these locations, by default:
    #*'''Windows:'''
    #**C:\Program Files\Mozilla Firefox
    #**C:\Program Files (x86)\Mozilla Firefox
    #*'''Mac:''' Delete Firefox from the Applications folder.
    #*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
    #Now, go ahead and reinstall Firefox:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    Please report back to see if this helped you!
    Thank you.
    <!-- VERY important to include-->
    <b>WARNING:</b> Do not run Firefox's uninstaller or use a third party remover as part of this process, because that could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. <u>These cannot be recovered unless they have been backed up to an external device!</u>

  • Daqmx error num: -50103 with message: The specified resource is reserved. The operation could not be completed as specified.

    Hi, I am running a program where I have 4 nidaq cards on a single machine, all connected. I am trying to start a counter and keep getting that error (daqmx error num: -50103 with message: The specified resource is reserved. The operation could not be completed as specified.) in two places in my code. I understand what the error means (you can only have one task of a type per card), but I don't see where that is occuring in my code.
    See below for code. I noted the two places where the error is occuring. I am debugging someone else's code, which is part of the problem.
    Thanks!
    counterTask = 0;
    daq_err_check( DAQmxCreateTask( "counter_generation_task",
    &(counter_generation_task) ));
    daq_err_check( DAQmxCreateTask("counter_count_task",
    &(counter_count_task) ));
    char co_chan_name[40];
    char ci_chan_name[40];
    char ci_trig_chan_name[40];
    sprintf( co_chan_name, "%s/ctr0", niDev);
    sprintf( ci_chan_name, "%s/ctr1", niDev);
    sprintf( ci_trig_chan_name, "/%s/PFI9", niDev);
    printf("OK1");fflush(stdout);
    daq_err_check( DAQmxCreateCOPulseChanTicks( counter_generation_task,
    co_chan_name, "", "ai/SampleClock",
    DAQmx_Val_Low, 32,16,16) );
    daq_err_check( DAQmxCfgImplicitTiming( counter_generation_task,
    DAQmx_Val_ContSamps, 1000) );
    daq_err_check( DAQmxCreateCICountEdgesChan( counter_count_task,
    ci_chan_name, "",
    DAQmx_Val_Rising, 0, DAQmx_Val_CountUp) );
    daq_err_check( DAQmxCfgSampClkTiming( counter_count_task,
    "Ctr0InternalOutput", 1000.0, DAQmx_Val_Rising,
    DAQmx_Val_ContSamps, 1000) );
    daq_err_check( DAQmxSetRefClkSrc( counter_generation_task, "OnboardClock") );
    daq_err_check( DAQmxSetRefClkSrc( counter_count_task, "OnboardClock") );
    printf("abt to start counter_count\n"); fflush(stdout);
    daq_err_check ( DAQmxStartTask( counter_count_task ) ); // ERROR OCCURS HERE
    printf("abt to start counter_gen\n"); fflush(stdout);
    daq_err_check ( DAQmxStartTask( counter_generation_task ) ); // ERROR OCCURS HERE
    fflush(stdout);
    Thanks again for your patience!

    I get it when capturing from my mini DV cam (which is not controllable by FCP). To resolve, I have to click Capture Now a split second after I start the DV tape rolling.

Maybe you are looking for

  • I tunes downloads help

    Recently I down loaded a movie from I tunes onto my iPad .    I took another of my iPads , signed out the existing apple i.d. And signed in my apple I.d. Which was used to purchase the movie and downloaded it on my second iPad. It worked but when I s

  • How can I get my exchange calendar to appear in Outlook 2011?

    I have had this issue multiple times. I even have a new Macbook Pro because I couldn't solve this on the previous machine. Now I can's solve it on this machine. My exchange account works fine on a PC, my iPhone 4, and OWA. There are 2 other Macbook P

  • Invalid Date Code Error in DBI

    Hi i'm working on oracle EBS ERP R12 i make a report in oracle DBI [Generated Data Source] using Scott/Tiger schema's table EMP in EMP table the hiredate values below the 1995 year.. but i insert 3 -4 records manually and the hiredate value above 200

  • How can I force FCP to re-render video that's already rendered?

    I recently bought a new Mac... actually it's a used Mac, but, well, you know, it's new to me! Anyhow, my "new" Mac is a 1.83 GHz Intel Core 2 Duo iMac, and my old computer is a 1.25 GHz PPC G4 eMac. They're both running OS X 10.4.11. I just installed

  • Playlist on ipod different from computer after disconnecting

    Hi! This just starting happening once I upgraded to Itunes 9. I sync my ipod and iphone and the playlists (mostly just my top 25 most played) are the same UNTIL I disconnect them from the computer. Then they're magically different. HELP!