BPM error : Message pipeline PE_ADAPTER unknown XML message not found. Help

Hello All,
I have done 3 steps in BPM
RFC --- BPM --- RFC
RECEIVE step ==> Opens SYNCH ASYNCH bridge and receives RFC request message
SEND synchronous ==> to send RFC request and get the RFC response.
SEND ==> Closes SYNCH ASYNCH bridge and Send's response back to the RFC.
In my last send step (response back) I am getting message
"Message pipeline PE_ADAPTER unknown XML message not found" .
Pls help

Hi Rick,
check out this SAP Note: 1087532
Regards
Dominic

Similar Messages

Validation error message not found in PI 7.1 :

I've enabled Validation at adapter engine level.When a message is failed at validation level,i got an alert email with message id.
But i can't see the message in Message monitorring and Communication chennel monitorring as well.
Any idea/.??????
Thanks
Prabhakar

I've enabled Validation at adapter engine level.When a message is failed at validation level,i got an alert email with
message id.
But i can't see the message in Message monitorring and Communication chennel monitorring as well.
XML Validation in Adapter Engine = backward Error handling
backward Error handling = Message Not Persisted ....hence there would be no message that you can see.
For more info refer page 14, 17
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b04bc560-e4e7-2a10-92ab-92dbf097aae1?quicklink=events&overridelayout=true
Regards,
Abhishek.

New error message--not found elsewhere on the Internet

For the past week I've been getting this error message when I open iTunes:
"The iPod 'Zach's iPod' cannot be updated. An unknown error occurred (-208)."
My iPod, however, still appears on my desktop, under devices in iTunes, and iTunes updates it as well.
Does anyone know what this message means and how I can correct it? I called AppleCare, but the representative had never heard of it either.

Does this help?
http://docs.info.apple.com/article.html?artnum=61031

LR4.4 error messages not found when looked up

I finally caved and ordered LR 4.4 Problems.
1.. slow downloading from 8 and 16GB cards in raw....seemed faster in LR3, but hadn't used 16GB cards there....read some on this, but how are you supposed to refresh in the middle of a download? It would just cancel everything.
2. When pics show up in Library be4 they are downloaded and I click on Loupe view, sometimes they are full size, and some times they pop up real tiny in the center of the oupe, like a tiny slide....once that happens, none of the pics go back to full size, so I can't review them to see which ones I don't want to download.
3. Sometimes when I "unclick" the download check box, after I hit the forward or backward arrow, it rechecks the box...when I go fromlouype view to the s"see all" view, however, the unchecked ones are indeed unchecked, usually, but I have to keep going back and forth to look and see if they are unchecked or checked.
4. Twice now I have gotten a box popped up at the end of the download that says" The following files were imported but could not be renamed>" Then it lists the files, which are all of them......
5. Finally, and most disturbing, my latest download has on almost every pic across the top, "The file named "IMG_1234.dng" is offline or missing." WHAT??????? And the pics that it says that on are very blurry. The pics that this message is NOT on are sharp.
I was reluctant to buy LR$/4.4 and hesitated, and now I am even more unhappy...wanted to wait for 5, but no one could tell me when it was coming and I just took a couple of thousand pics in China and am anxious to see them. Please help me, as I am off this weekend and was really hoping to plow into them.
King Tut's Mom

Let's start by clearing up some confusion.
PORTS
In version 11.1.1.x here are how the common ports are defined by default:
1. HTTP Server - 8888
2. WLS_FORMS - 9001
3. WLS_REPORTS - 9002
4. WLS Admin Server - 7001
So, if you understand how ports work in general, you should see that there are two ways to run a form. You can either go through HTTP Server or call WLS_FORMS directly. This means that both of the following would work, although one would be a direct path and the other would route the request through the HTTP Server:
<li>http://ie1fdtfc5zl1s:9001/forms/frmservlet?config=frmdemo
<li>http://ie1fdtfc5zl1s:8888/forms/frmservlet?config=frmdemo
Port 7001, will always be the Admin Server port by default for the Classic domain. By default, the only thing you can do from here is access EM or WLS Console.
As for the tns issue, by default, both the Builder and runtime will expect to find tnsnames.ora in the Instance Home \config so be sure you are adding the correct entries to the correct file.
You can hard code a path to the file which you prefer be used by setting TNS_ADMIN in default.env (e.g. TNS_ADMIN=C:\Oracle\mytnsdirectory). This will apply only to running forms and not the Builder.
Also, here is something which often is confusing to many people.... just because you launched your form from the Builder does not mean that the running form has anything to do with the Builder at that point. In other words, when you click on the RunForm button in the builder all you are doing is passing a url to a browser. The browser and the form are not using any of the Builder's settings except those which may have been passed in the URL (e.g. username/password). ALL running forms are considered "runtime". This means all of the environment configuration information for a running form will need to be set in default.env. The Builder, on the other hand will rely on the System variable, Windows Registry (or shell if on Unix).

ITunes Sync Error Message Not found in iTunes - Where is this?

Occasionally when I sync my iPhone 4 with iTunes I will get an error on the iPhone that says 'Itunes Sync - some items could not be synced. See iTunes for more information' - I look in iTunes and can't find any error. Where is this displayed? Is there an error log?

Occasionally when I sync my iPhone 4 with iTunes I will get an error on the iPhone that says 'Itunes Sync - some items could not be synced. See iTunes for more information' - I look in iTunes and can't find any error. Where is this displayed? Is there an error log?

2012 R2 Hyper-V Virtual Switch Refuses to Be Created -- Error Messages Not Especially Helpful

Windows Servers 2012 R2 Standard
4 NICs
Windows 8.1 is guest of the host
Hyper-V
Virtual Switch Manager
External
Create Virtual Switch
External network
Choose a NIC that is connected to the physical Ethernet switch but otherwise unused
Tick Allow management operating system to share this network adapter
Untick everything else
Click Apply
"Error applying Virtual Switch Properties changes"
"Failed while adding virtual Ethernet switch connections."
"External Ethernet adapter "<name-of-adapter>" is already bound to the Microsoft Virtual Switch protocol."
Close
Cancel
Control Panel\Network and Internet\Network Connections
Change Properties of NIC to untick Virtual Switch protocol
Repeat steps as above
"Virtual Switch Manager for <name-of-server>"
"Error applying Virtual Switch Properties changes"
"An internal error occurred while processing the results of creating a new virtual switch."
"To refresh the results, close and then reopen this window."
Close
Dead in the Water
An internal error occurred while processing the results of creating a new virtual switch. To refresh the results, close and then reopen this window.
The first one is to use a tool called “nvspscrub.js”. Download nvspscrub.js then from cmd run: “cscript nvspscrub.js”, this will delete all vswitches, virtual NICs in the parent partition and will unbind the switch protocol from all physical NICs.
This script aborts when a class turns up undefined. Maybe this old script applies solely to Windows Server 2008. Dunno.
NVSPbind
What I do now?
It is an internal error. Internal to what?
MARK D ROCKMAN

Hi Mark,
I just came across the same issue!
After troubleshooting, I deleted all my Virtual Switches and reinstalled my WiFi and Ethernet NIC drivers.
I'm now able to create the Virtual Switches without error.
Hope this helps.
Regards
Lee

Message not found. Application: FND, Message Name: FND_VIEWOBJECT_NOT_FOUND

Hi,
we are currently upgrading our environment from R12.1.2 to R12.1.3.(Projects)
In the R12.1.3 there is a change in the TeamTableVO and already we have exteneded the standard VO in R12.1.2 as UDTDPATeamTableVO.
So due to oracle changes the custom VO throwed error in our page, so we retrofitted the 12.1.3 changes in our CustomVO.
After retrofitting the VO the exception page got rectified and the page loads with the following error.
Error :
Message not found. Application: FND, Message Name: FND_VIEWOBJECT_NOT_FOUND. Tokens: VONAME = USTDPATeamTableVO; APPLICATION_MODULE = oracle.apps.pa.team.server.TeamListAM;
Please can anyone help us to resolve this error.
Regards,
Berch

Yes i have done the Jpx import after the VO sustitution. Please find the below results from DB.
SET serveroutput ON
DECLARE
BEGIN
jdr_utils.listdocuments
('/oracle/apps/pa/team/server/',TRUE);
END;
anonymous block completed
Printing contents of /oracle/apps/pa/team/server/ recursively
/oracle/apps/pa/team/server/customizations/site/0/TeamTableVO
SET serveroutput ON
declare
BEGIN
jdr_utils.printdocument('/oracle/apps/pa/team/server/customizations/site/0/TeamTableVO');
END;
anonymous block completed
<?xml version='1.0' encoding='UTF-8'?>
<customization xmlns="http://xmlns.oracle.com/jrad" xmlns:ui="http://xmlns.oracle.com/uix/ui" xmlns:oa="http://xmlns.oracle.com/oa" xmlns:user="http://xmlns.oracle.com/user" version="10.1.3_1305" xml:lang="en-US"
customizes="/oracle/apps/pa/team/server/TeamTableVO">
<replace with="/uni/oracle/apps/pa/team/server/USTDPATeamTableVO"/>
</customization>

Reg:Message not found. Application: FND, Message Name: CHILD_NOT_FOUND

Dear team,
We are persoanlizing iSupplier Portal . CM file extract tab
Our requirement is to add 2 new search conditions to existing search Criteria.
PO Need By Date and PO creation Date are the 2 new search conditons. datatype is date
Already
PO Need By Date exists so when we checked on querable in ak region It was dispalyed as search condition in page.
So for PO creation Date , we created new attribute, added that attribute to Object workbnch View and then to the Region
When i am checking querable , and checking CRM file tab I am getting the below error
Error
Message not found. Application: FND, Message Name: CHILD_NOT_FOUND.
Pls suggest. Its an urgent Req.
Regards,
Radha

When u go to the about this page.. and check how fields are defined for searching....
2 things are required.....
one create a field on which search is required..
secondly... create a mapping.... this mapping tells u that the field on which search is performed.. how is this mapped to the database column... .... i.e. on the search results on the page...
once the mapping between the field and the results table column is defined .. that error will go off..

SXMB_MONI : Error in Persistence Layer : XML Message Not Found

Hi Team,
There are some messages in our Production system and is in Scheduled state in SXMB_MONI and when we try to re-process those messages, we are getting message : Error in Persistence Layer and when we double click on message, we are getting the error : XML Message Not Found.
Any help on this is highly appreciated.
Thanks & Regards,
C V Jayachandra

Hi,
Please refer the below discussion
SXMB_MONI - Error accessing persistence layer
regards,
Harish

I get error message: not enough space to download when I try to buy a tv series on Itunes. It tells me to delete photos or videos to make space, but I have no photos and videos. Help?

I get error message: not enough space to download when I try to buy a tv series on Itunes. It tells me to delete photos or videos to make space, but I have no photos and videos. Help?

I would guess that a TV series takes up a fair amount of storage capacity. It is just a standard message I think that may indicate that you are actually running low on storage space.
If you go to Settings>General>About how many GBs are specified as being available? If you are low on space maybe deleting some apps may help.

I keep getting error message "not enough space on startup disk" on my macbook 10.6, even though I've deleted and compressed many files. Could something else be the problem?

Somehow 1500 web pages were downloaded into my iphone app! That's when the trouble began Now, I keep gettig error message"not enough room on your start up disc. "So I deleted most of theml, but when I compress/delete files, it doesn't help. Now i'm unable to back up to a disc, because I get a similar message about lack of room.. I can't download apple updates or printer updates. My computer is almost unusable. When I took it to the Apple store they had no idea what was wrong.
I bought an external hard drive-Free Agent Go Flex which doesn't seen to function, and has no user interface and apparently little tech support. My cursor is all over the place. No one at Apple seems to be able to fix this computer. Any suggestions for my next move?
Thank you.

See Here for Troubleshooting
Free Disc Space
http://www.thexlab.com/faqs/freeingspace.html
See Here for Resolving Startup Issues
http://support.apple.com/kb/ts1417

Can anyone help me? The iTunes update corrupted my program. I uninstalled, and then reinstalled iTunes; only to find an error message about iTunes Helper. After several fruitless, repeat attempts, I am at a loss. Please help-

Can anyone help me? The iTunes update corrupted my program. I uninstalled, and then reinstalled iTunes; only to find an error message about iTunes Helper. After several fruitless, repeat attempts, I am at a loss. Please help…

Many thanks.
With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Version 31.3, error in upadting RSS feeds. Error Message - not a valid feed.

After upgrading to version 31.3, error in updating RSS feeds.
Error message - not a valid feed.
Unable to Attach screen shot of feed validator results

The answer is in the guide, please read it carefully:
https://support.mozilla.org/en-US/kb/how-subscribe-news-feeds-and-blogs
You can turn on extreme debugging as well. The problem is always with the publisher failing to follow specs; inform them to do so.

QAAWS error message "not a valid query"

Hi,
When I'm trying to connect to QAAWS I get this error message: "not a valid query. FWB 00025".
Does anyone know how to solve this problem?
The server where the BOE is installed on has been restarted a couple of times but it doesn't help.
Universe Designer and WebI work fine.
Thanks!

Is QaaWs running properly on your system?
To validate the installation, open a browser and type the following URL
http://[server]:[port]/dswsbobje, where [server] corresponds to
your web server address and [port] corresponds to the port where you
set up in your web server. The default used by Tomcat is 8080. dswsbobje
is the default name of the Web Service provider web application. Then Validate.

HT1923 got notification that new Itunes version is available, once i installed it I'm no longer able to open Itunes, I get the error message, Not installed properly. Reinstall itunes. Error 7(Windows error127),

got notification that new Itunes version is available, once i installed it I'm no longer able to open Itunes, I get the error message, Not installed properly. Reinstall itunes. Error 7(Windows error127), I tried repairing itunes, Apple Aplication support, apple mobile device support, bonjour and I even uninstalled and reinstalled Itunes and still problem exist, any solution?
I have windows 8

I got this message today too. I understand that my music is stored on my computer, however I want to be certain that if I re-install iTunes, it won't erase my library....playlists, playcounts, checked songs, etc.

BPM error : Message pipeline PE_ADAPTER unknown XML message not found. Help

Similar Messages

Maybe you are looking for