BPM Exception handling for RFC errors

Hi all
I have to handle the exception which would be like below:
com.sap.aii.af.ra.ms.api.DeliveryException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get a client from JCO.Pool: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed
I am trying to put Block step and things are not working fine. Can anyone please explain me the steps to trap the exception?
My scenario has synchronous call to RFC FM.
Rightnow i have inserted Exception branch in my Block step and put the send step to write the error file. I have put the Synchronous SEND step as part of block. This is not working.
Help please??

Hello Samuel,
Just to close this thread and finish up my own search, where I met your discussion, here I'm quoting two experts of this forum:
"you cannot catch the exception's value in the XI "
(see posting from Michal Krawczyk, Jun 12, 2006, in thread catch the exception)
"The content of a fault message are not accessible inside a BPM."
(see posting from Bhavesh Kantilal, Oct 3, 2007, in thread Notify user about Exception in BPM)
Regards,
Dennis

Similar Messages

BPM - Exception handling in multiline mapping

Hi,
I have in a BPM a block with processing mode ParForEach containing a transformation and then a send step.
If the transformation (mapping) generates an exception for one of the lines of the multiline variable being processed, no subsequent lines are passed to the send step.
I want the process to execute the mapping for each line and then send messages corresponding to lines without error. How can I do?
Thank you
Simona

Hi Simona,
I also feel that Michal had suggested the correct solution. Not sure why you are saying that the error gets propagated, if you have defined a proper Exception handling for the inner block.
But regarding your design for "ParForEach", I am not sure whether you really need to carry out a transformation step for each Block instance, in which case you can keep the transformation step before the "ParForEach" block.
Rgds
R Chandrasekhar (RC)

Exception handling in rfcs and bapis

exception handling in rfcs and bapis

Hi Jayakrishna,
In General , there are non execptions in BAPIs, because of the reason, that the exception raised in a SAP envoronment may not mean anything for a non SAP initiator. All the exception situations would only fill the return table(TYpe BAPIRET2 or something like that). If you read that table after the call to the bapi, you can understand what has gone wrong.
Regards,
Ravi

Exception handling for ProjectService methods in a new 2006 DI API

Normally for other objects the Add() method returns error code and calling the GetLastError you get the description.
AddProject(Project) method of ProjectService returns ProjectParams object.
So the question is where to get the error code or what is the correct exception handling for that new methods in 2006 SDK.
Thanks for any help.
Tomas

Hi all,
I have a sceranio :
I created the text field, text box, com bobox .etc, on new form or exist form.
When I want to bind data into UDO, i use "DataBind.setBound"
ex:"oEdit.DataBind.SetBound(True, "@SM_OMOR", "U_Room")"
Can i bind the data to exist table on B1?
ex: oEdit.DataBind.setBound(True, "OHEM", "firstName")
Plz guid !
Rgds !

No Exception Defined for System Errors

hi,
I am capturing system messages through an Exception error handler in the block step of Integration Processes.
Its a IDOC -> XI -> HTTP Receiver scenario.
When i execute the scenario, i see an error in the workflow in the Block Step. It shows an Error which says "No Exception Defined for System Errors", though i have a Exception Branch in the Block step.
Any clues why i am not able to capture the Exception errors and send it through email.
Its failing at the Block step.
More details on the scenario:
1. Start
2. Receive Step - Asynch - IDOC
3. Block Step - with Exception name as "TimeOut"
3.1 Exception Branch with exception handler as "Timeout"
3.1.1 - Transform Step - to transform a Exception message(with just one field) to "Error" message (with 5 fields)
3.1.2 - Send Step - send the "Error" message through email
3.2 Deadline branch set to 1 minute
3.3 Switch step
3.3.1 Transformation step - to transform the IDOC to XML
3.3.2 Send step - Synch - request xml and response xml defined in this step
4. Switch Step
4.1 - Transform step - transforms the idoc and xml response to the actual error
4.2 - Send Step - sends the actual error to the email message using MAIL adapter.
Any tips would be grateful.
Thanks,
Tirumal

Stefan -
In step 3.3.2
I did find the property exceptions and assigned the exception branch in the block and ran the scenario, now i get an error saying that : "Exception Timeout Occurred."
I went through the Technical Details of the workflow and the error displayed there is "Exception 'Timeout' caught and transferred to the exception handler'.
In step 3.1.1
I get an error saying "No Payload found'.
Does this mean its not able to capture the message text.
Thanks in advance,
Tirumal

2007A: Exception handling for new ProjectService methods

Normally for other objects the Add() method returns error code and calling the GetLastError you get the description.
AddProject(Project) method of ProjectService returns ProjectParams object.
So the question is where to get the error code or what is the correct exception handling for that new methods in 2006 SDK.
Thanks for any help.
Tomas

Hi Thomas,
For DI API services there is no return code as for the basic objects methods like Add, Update,...
The only way is then to put try/catch blocks in your code and identify the error message with the Exception.Message property (same mechanism as we have for the UI API). No way to filter them by return code.
Regards
Trinidad.

Exception handling for all the insert statements in the proc

CREATE PROCEDURE TEST (
@IncrStartDate DATE
,@IncrEndDate DATE
,@SourceRowCount INT OUTPUT
,@TargetRowCount INT OUTPUT
,@ErrorNumber INT OUTPUT
,@ErrorMessage VARCHAR(4000) OUTPUT
,@InsertCase INT --INSERT CASE INPUT
WITH
EXEC AS CALLER AS
BEGIN --Main Begin
SET NOCOUNT ON
BEGIN TRY
DECLARE @SuccessNumber INT = 0
,@SuccessMessage VARCHAR(100) = 'SUCCESS'
,@BenchMarkLoadFlag CHAR(1)
,@BenchmarkFlow INT
,@MonthYearStart DATE
,@MonthYearEnd DATE
,@StartDate DATE
,@EndDate DATE
/* Setting the default values of output parameters to 0.*/
SET @SourceRowCount = 0
SET @TargetRowCount = 0
/*Setting the Start and end date for looping */
SET @MonthYearStart = @IncrStartDate;
SET @MonthYearEnd = @IncrEndDate;
/* Setting the @InsertCase will ensure case wise insertion as this sp will load data in different tables
@InsertCase =0 means data will be inserted in the target TAB1
@InsertCase =1 means data will be inserted in the target TAB2
@InsertCase =2 means data will be inserted in the target TAB3
@InsertCase =3 means data will be inserted in the target TAB4
@InsertCase =4 means data will be inserted in the target TAB5
@InsertCase =5 means data will be inserted in the target TAB6
if @InsertCase =0
WHILE (@MonthYearStart <= @MonthYearEnd)
BEGIN
SET @StartDate = @MonthYearStart;
SET @EndDate = @MonthYearEnd;
/* Delete from target where date range given from input parameter*/
DELETE FROM TAB1
WHERE [MONTH] BETWEEN MONTH(@StartDate) AND MONTH(@EndDate)
AND [YEAR] BETWEEN year(@StartDate) and year(@EndDate)
/*Insert data in target-TAB1 */
BEGIN TRANSACTION
INSERT INTO TAB1
A,B,C
SELECT
A,BC
FROM XYZ
COMMIT TRANSACTION
SET @MonthYearStart = DATEADD(MONTH, 1, @MonthYearStart)
SELECT @TargetRowCount = @TargetRowCount + @@ROWCOUNT;
END -- End of whileloop
END TRY
BEGIN CATCH
IF @@TRANCOUNT>0
ROLLBACK TRANSACTION
SELECT @ErrorNumber = ERROR_NUMBER() ,@ErrorMessage = ERROR_MESSAGE();
END CATCH
END--End of Main Begin
I have the above proc inserting data based on parameters where in @InsertCase is used for case wise execution.
I have written the whole proc with exception handling using try catch block.
I have just added one insert statement here for 1 case now I need to add further insert cases
INSERT INTO TAB4
                A,B,C
SELECT
                                A,BC
FROM XYZ
INSERT INTO TAB3
                A,B,C
SELECT
                                A,BC
FROM XYZ
INSERT INTO TAB2
                A,B,C
SELECT
                                A,BC
FROM XYZ
I will be using following to insert further insert statements
if @InsertCase =1
I just needed to know where will be my next insert statement should be fitting int his code so that i cover exception handling for all the code
Mudassar

Hi Erland & Mudassar, I have attempted to recreate Mudassar's original problem..here is my TABLE script;
USE [MSDNTSQL]
GO
/****** Object: Table [dbo].[TAB1] Script Date: 2/5/2014 7:47:48 AM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[TAB1](
[COL1] [nvarchar](1) NULL,
[COL2] [nvarchar](1) NULL,
[COL3] [nvarchar](1) NULL,
[START_MONTH] [int] NULL,
[END_MONTH] [int] NULL,
[START_YEAR] [int] NULL,
[END_YEAR] [int] NULL
) ON [PRIMARY]
GO
Then here is a CREATE script for the SPROC..;
USE [MSDNTSQL]
GO
/****** Object: StoredProcedure [dbo].[TryCatchTransactions1] Script Date: 2/5/2014 7:51:33 AM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE [dbo].[TryCatchTransactions1] (
@IncrStartDate DATE
,@IncrEndDate DATE
,@SourceRowCount INT OUTPUT
,@TargetRowCount INT OUTPUT
,@ErrorNumber INT OUTPUT
,@ErrorMessage VARCHAR(4000) OUTPUT
,@InsertCase INT --INSERT CASE INPUT
WITH
EXEC AS CALLER AS
BEGIN --Main Begin
SET NOCOUNT ON
BEGIN TRY
DECLARE @SuccessNumber INT = 0
,@SuccessMessage VARCHAR(100) = 'SUCCESS'
,@BenchMarkLoadFlag CHAR(1)
,@BenchmarkFlow INT
,@MonthYearStart DATE
,@MonthYearEnd DATE
,@StartDate DATE
,@EndDate DATE
/* Setting the default values of output parameters to 0.*/
SET @SourceRowCount = 0
SET @TargetRowCount = 0
/*Setting the Start and end date for looping */
SET @MonthYearStart = @IncrStartDate;
SET @MonthYearEnd = @IncrEndDate;
/* Setting the @InsertCase will ensure case wise insertion as this sp will load data in different tables
@InsertCase =0 means data will be inserted in the target TAB1
@InsertCase =1 means data will be inserted in the target TAB2
@InsertCase =2 means data will be inserted in the target TAB3
@InsertCase =3 means data will be inserted in the target TAB4
@InsertCase =4 means data will be inserted in the target TAB5
@InsertCase =5 means data will be inserted in the target TAB6
IF @InsertCase =0
WHILE (@MonthYearStart <= @MonthYearEnd)
BEGIN
SET @StartDate = @MonthYearStart;
SET @EndDate = @MonthYearEnd;
/* Delete from target where date range given from input parameter*/
DELETE FROM TAB1
WHERE START_MONTH BETWEEN MONTH(@StartDate) AND MONTH(@EndDate)
AND START_YEAR BETWEEN year(@StartDate) and YEAR(@EndDate)
/*Insert data in target-TAB1 */
BEGIN TRANSACTION
INSERT INTO TAB1 (COL1,COL2,COL3)
VALUES ('Z','X','Y')
SELECT COL1, COL2, COL3
FROM TAB1
COMMIT TRANSACTION
SET @MonthYearStart = DATEADD(MONTH, 1, @MonthYearStart)
SELECT @TargetRowCount = @TargetRowCount + @@ROWCOUNT;
END -- End of whileloop
END TRY
BEGIN CATCH
IF @@TRANCOUNT > 0
ROLLBACK TRANSACTION
SELECT @ErrorNumber = ERROR_NUMBER() ,@ErrorMessage = ERROR_MESSAGE();
END CATCH
PRINT @SUCCESSMESSAGE
END--End of Main Begin
GO
I am just trying to help --danny rosales
UML, then code

Exception Handling for many bean objects of a container class in a JSP page

Hello,
I have on container bean class. In this container class, there are several others class objects and the getter methods to get these objects out to the JSP pages.
I have one JSP page which will use different objects in the container class object through the getter methods of the container class.
My question is how to implement the exception handler for all the objects in the container so that the JSP page can handle all exceptions if occurrs in any object in the container?
Please give me some suggestions. Thanks
Tu

Thanks for your reply.
Since the container is the accessor class, I have no other super class for this container class, I think I will try the try catch block in the getter methods.

May I use Exception Handling for validation ?

Hello All,
Can any one know about that may i use exception handling for validation in my report program.
Please if its possible then give me some Example...
Thanks.

Hi Niraj,
Exception is not at all raised or handled in the given example.
There are so many document available in the SCN regarding OO ABAP you can read that.
As far as validation of a field ( Selection screen ) of course we can do that but I don't see any advantage more over it will make your code unnecessarily complex.
Regards
Bikas

BPM Exception Handling control step

Hi,
Does anybody have any idea, whats the variable we need to pass in the control step of exception handling in BPM? and how to map the error message back to the RFC Response.
I had Transformation step, in that mapping is also there.
Is there any ideas??.
Thanks,
Raj.

Hi,
The requirement was to send the exception that occured to a target (say file).
<i>insert a block for the exception</i>
You cannot place an exception step without a block right... thats what i mean by the above statement.
Now, just after the exception has taken place, if i put a transformation step, and a send step, you will be taking care of sending the exception message to the target.
<i>how to build the exception message ? It should map from what?</i>
You could build a data type for the exception.
In the mapping, you could map it to constants. For ex:
if you build your DT as
<excep>
<code/>
<desc/>
</excep>
You could map the description to a constant string "timeout".
After this, the send step will send the message to the file, through the abstract interface that you create.
Regards,
Smitha.

Exception Handling in RFC lookup

Hi Experts,
I have a query in RFC Lookup function working with PI 7.1, file to Idoc scenario.
I am using Enhance Receiver Determination to find the dynamic recivers.Here we have used a Functional Module which gives an output according to the the input parameter (which comes from input file). thus i have used RFC lookup to the remote system to fetch this info from FM.
Problem -
When the remote system is down or if the RFC lookup attemped & exceptions raised for some reason (RFC user authority has been changed & it was not able to perform the intended Job at remote system) , the message stuck in queue and block the several other messages from another interfaces which belongs to teh same queue.
Queries-
This is not allowed in production as it affects other services.
1>how can we handle the RFC lookup exception (in case of remote system is down or if the RFC lookup exception)
2>how can we perform Local lookup at PI box rather then remote lookup (the FM fetches the data from remote system)
3>Is Value mapping is relevant in this case raher the RFC lookup ? I am not sure as the values are dynamic & selected as per the FM's output.
Please provide your valuable insight .
Thanks in advance !
-Jyoti

Hi Jyoti,
Answer for your 3 question.
1. RFC lookup will get execute on R/3 so if R/3 is down there no way that your RFC lookup will work as expected.
2. So if R/3 is down or RFC not able to get receiver system due to some problem.. then in that case.
          On your Receiver determination at bottom
          Configure u201Cif no receiver found proceed as followingu201D
           In this you can have 3 option.
                    a. Error message u2013 if you select this the transaction will end with error message in SXMB_MONI
                    b. Ignore: if you select this execution will get ignored and there will not be any entry in SXMB_MONI
                    c. Select the following receiver. You can select this and can configured default receiver system in case if RFC not able to determine receiver then interface will get route to receiver system configured here.
3. As you mentioned values are dynamic then Value mapping doesnu2019t make any sense here. RFCl ookup is the right option and above are few other option in case you RFC lookup flailed.
Thanks,
Bhupesh

Exception handling for Null/Incorrect input parameters

Hi,
My BI Publisher report has input parameter name as <region>. It is a text field and is mandatory parameter.
But if I run the report without giving value to the parameter it gives the error "The report cannot be rendered because of an error, please contact the administrator."
How can I handle this scenario so that User defined message is displayed, asking user to give correct input.
I am using Oracle BI Publisher 10.1.3.3.3
Is there some documentation available for Exception Handling/How to display User defined messages in case of error?
My requirement is that after displaying the error message (say for example "Please enter Region name"), the report processing should stop there only and it should not display the blank pages of the rest of the PDF template.
Thanks in advance.

Hi,
Thanx for the solution.
I have another query linked to this issue. My requirement is that after displaying the error message (say for example "Please enter Customer name"), the report processing should stop there only and it should not display the blank pages of the rest of the PDF template.
Thanx in advance.

Exception handling for mis-addressed messages

We are using ebXML messaging in WLI. In many of our workflows we start new conversations with trading partners based on the contents of address fields in the messages. Now and again during development a message comes in which is addressed to a TP who doesn't exist. The message fails to be sent and rolls back repeatedly. Is there a simple way to remove these messages from the WLI hub? Can exception handling be used to move messages which are failing to enter the workflows to a special queue automatically?
thanks
Ben

Hi Holger,
I will not translate the coding into VB. So if you want to do this it is OK with me.
An idea would be after some testing by the community to provide the functionality as a DLL. This way it could also easily be added to a VB project.
However I assume that some developers prefer to integrate the coding themselves so that they might add additional customer specific functionlity.
For example not to raise an exception if a specific error is in the return parameter because they want to ignore it.
Best regards,
Andre

BPM Exception Handling

I am trying to test my Deadline and Exception handling.But it is not at all working. I will explain what I have done, please guide me where I am going wrong.
1) Block Step. Properties --- Exception == ERROR1
2)Switch Step . Success Branch . Send Step. with a Transport Response. And I am sending to the Mail adapter. And in directory I have provided the WRONG URL FOR THIS Mail.
      Otherwsie Branch. Send step, sending to a File.
3)Dead Lock Branch : Having a Control Step.
              Properties
               Action : Throw Exception
               Exception: ERROR1
4) Exception Branch.
           Properties
                Exception Handler : ERROR1
      Send Step : Send a Message to a File (
Result
I am Seeing a Clock in my SXMB_MONI OUTBOUND_Status column, because I am expecting a TRANSPOT Response, and this going to never happen, so I thought the Deadline monitor will wakeup after 1 minute interval and my Exception branch has to Trigger, but it has never triggered my Deadline branch aswell as my Exception Branch.
WE are in XI SP 12. We dont have CCMS installed yet, even ALERT management is not installed.
Please guide me.
Thanks.

Hi Anand,
I looked into the Transaction SWI2_DEAD and I dont see any listings there.
I am executing 1 Minute deadline Monitoring and from here firing an exception Branch, for my Asynchronous Scenario.
So definitely after a minute , the DeadLine Branch should have been fired. But it didnot take place.
In the mean time I have located an OSS notes OSS note 829921 And I am awaiting my Basis team to apply this note.
symptom
If the execution of an asynchronous method ends with a "system error" or "application error", the work item is not set to the 'ERROR' status.
Other terms
Reason and Prerequisites
This problem is caused by a program error.
Solution
Implement the correction instructions.
Note the following manual changes that must be implemented BEFORE you use SNOTE to implement the corrections:
1. Make sure that the SET_EXECUTION_INTERRUPTED method of the CL_SWF_RUN_RESULT class has the following parameters:
a) IM_CODE, Importing, Optional, Type SWO_RETURN, default Value 0000
b) IM_ERRORTYPE, Importing, Optional, Type SWO_ERRTYP, Default Value 0
Note the following manual changes, which you must carry out AFTER you have implemented the corrections:
1. The M_EXECUTION_INTERRUPTED attribute type of the CL_SWF_RUN_RESULT class must be changed to EXECUTION_INTERRUPTED.

Exception Handling for Array Binding

Hi
1)
I am using a Stored Procedure.
I am using array binding and if i am sending an array of count 10 to be inserted in a table and only 9 got inserted,i deliberatly inserted one errorneous record in array, the count returned by ExecuteNonQuery() is 10.Why ?
How can i come to know exact number of rows inserted in table, how can i use Output variables, because the array bind count is 10 so if i add an output parameter it gives error ArrayBind count is wrong....
2)
Is it possible to roll back all the inserts if error occurs in any of the insert by Oracle engine.What it does is it inserts all correct records and leaves the errorneous record and doesn't even throw any exception or any message.
Answer - This can be achieved by using OracleTransaction and don't use Exception handling in procedure otherwise there wont be any exception thrown by procedure which is necessary to detect if an error occured during insert.If you use exception handling OracleEngine will insert correct rows and leave errorneous record and return count of inserted + non inserted records which is wrong.
Please help.
Message was edited by:
user556446
Message was edited by:
user556446

You'll need to encapsulate your validation within it's own block as described below:
-- this will die on the first exception
declare
TYPE T_BADDATA_TEST IS TABLE OF VARCHAR2(1000) INDEX BY binary_integer ;
tbt T_BADDATA_TEST ;
aBadTypeFound exception ;
begin
   tbt(0) := 'a';
   tbt(1) := 'b';
   tbt(2) := 'c';
    for idx in tbt.first..tbt.last loop
      if tbt(idx) = 'b' then
          raise aBadTypeFound ;
      else
          dbms_output.put_line(tbt(idx));
      end if ;
    end loop ;
end ;--encapsulate the exception area in a begin/end block to handle the exception but continue on
declare
TYPE T_BADDATA_TEST IS TABLE OF VARCHAR2(1000) INDEX BY binary_integer ;
tbt T_BADDATA_TEST ;
aBadTypeFound exception ;
begin
   tbt(0) := 'a';
   tbt(1) := 'b';
   tbt(2) := 'c';
    for idx in tbt.first..tbt.last loop
      BEGIN
      if tbt(idx) = 'b' then
          raise aBadTypeFound ;
      else
          dbms_output.put_line(tbt(idx));
      end if ;
      EXCEPTION
        WHEN aBadTypeFound THEN
            dbms_output.put_line(tbt(idx) || ' is bad data');
        WHEN OTHERS THEN
            dbms_output.put_line('exception');
      END ;
    end loop ;
end ;
output:
a
b is bad data
c
***/

BPM Exception handling for RFC errors

Similar Messages

Maybe you are looking for