BPM in CACHE won't activate. Fault message is not defined

Hello All,
After adding fault messages to our RFC scenarios, our BPM will no longer activate from transaction SXI_CACHE. The ReturnCode is 99. When we attempt to do a manual activation, we get an error which reads:
<b>Send step: Fault message '722783b5171311d9881bd5c4c0a8a777' is not defined</b>.
Have any of you seen this before?
We have mappings for the fault messages in interface mappings. Is there something else needed in the BPM itself?
Thanks,
Jimmy

From OSS:
The synchronous send steps define a fault message as exception. In this
case you have to wrap a block around every one or all send steps.
The block catches the exception, in your case the fault message.
The problem is, if no handler is defined, the import of the process fails (SXI_CACHE).
So modify the process, wrap a block with exception
handling around the send step and activate once more.

Similar Messages

  • Fault Message is not defined?

    Hi @,
    I am using BPM asyn sync for File2RFC scenarion and while activating the scenarion I am getting return code 99 and when i see the activation log I am getting errro description as Fault Message is not defined I have done the Fayult message mapping between Abstract Sync Message and RFC Sync message between their fault and exception types but still
    Help is urgent
    Regards

    Hi,
    you define the exception handler in the block properties. Define (via context) an exception branch for the block, where you jump into in case of errors and decide, what to do (f.e. alert or stop process).
    Regards,
    Udo

  • Reloaded Photoshop CS5 (New Machine) and now it won't open, geta message "Could not open scratch file because disk is not available", so pS won't go any farther.

    reloaded Photoshop CS5 (New Machine) and now it won't open, get a message "Could not open scratch file because disk is not available", so pS won't go any farther.

    If prefs are the same as Settings on a MAC, OK, it would have been more 
    clear to me if you had said Settings since I didn't see anything related to 
    prefs. On a PC, I know what you mean, On a MAC, wasn't sure.
    In a message dated 4/9/2015 9:13:48 A.M. Eastern Daylight Time, 
    [email protected] writes:
    reloaded  Photoshop CS5 (New Machine) and now it won't open, geta message
    "Could  not open scratch file because disk is not available", so pS won't go
    any  farther.
    created by c.pfaffenbichler
    (https://forums.adobe.com/people/c.pfaffenbichler)   in Photoshop for Beginners - View the full  discussion
    (https://forums.adobe.com/message/7421714#7421714)

  • Exchange Fault message Structure not tranported in Proxy

    Hi,
    I have an Issue with the Proxy Object transport.
    We have transported from PDO to PDQ.... But when I checked in, Internal View or External View Tab, Under Exceptions I cant fault Mesage structure being Transported and thus throwing error while syntax error as Exchange Fault message not found.
    Any help would be appreciated.
    Regards,
    Varun

    > So as you said, If i include this structure to old transport, that will do ?
    No, you have to create a new transport where you include all objobt from old transport and the two structures for ExchangeFaultData and ExchangeLogData.
    If you do not know how to do this, let your basis team help you.
    > Does Regenerate Proxy will help now ? How to include that structure when regerating proxy again
    Now, this won't help, as the objects will not be created when they are already available.

  • Exception handling with fault message type not working

    Hi,
    I have a sync proxy to proxy scenario and I have created a fault MT and specified in the outbound and Inbound service interface...
    *In Inbound proxy I have the following code--*......
    RAISE EXCEPTION TYPE z_cx_test_fault
    EXPORTING
    standard = l_standard_data.
    In the sender side abap code which calls the outbound proxy I have the follwing code -
    CATCH cx_ai_system_fault INTO lo_cx_ai_system_fault.
    txt = lo_cx_ai_system_fault->get_text( ).
    WRITE txt.
    CATCH z_cx_test_fault INTO lo_cx_test_fault.
    txt = lo_cx_standard_message_fault->get_text( ).
    WRITE txt.
    CATCH cx_ai_application_fault INTO lo_cx_ai_application_fault.
    txt = lo_cx_ai_application_fault->get_text( ).
    WRITE txt.
    when i test the inbound proxy separately I get the custom fault message properly...
    however when i run the proxy to proxy sync scenario and the custom exceptionz_cx_test_fault  is raised inside the receiver proxy .......control goes to CATCH cx_ai_application_fault    and not CATCH  z_cx_test_fault .
    I understand that cx_ai_application_fault is the super class of all the exception class but why does control go to its exception handling when a custom exception is raised...
    Edited by: hema T on Feb 26, 2012 1:16 PM
    Edited by: hema T on Feb 26, 2012 1:17 PM

    Hi
    I tried changing the sequence also but it did not work...
    I can see an appropriate response coming from the receiver in SXMB_MONI of PI...this response has the "fault response "
    "fault detail" data that I want.....however when the control goes to the sender why does it go to CATCH CX_AI_APPLICATION_FAULT and not not my CATCH z_cx_test_fault .
    My observation - If I change the scenario to SOAP to Proxy sync..then the sender SOAP client gets the appropriate custom fault message back.
    Edited by: hema T on Feb 27, 2012 1:17 PM
    Edited by: hema T on Feb 27, 2012 1:17 PM

  • BPM 10g: configuration name [ ProjectName ] and type [SQL] is not defined.

    Hi There,
    I try to help a colleague with his BPM10g project. When I start the engine in BPM Studio with his project I eventually get this error in a popup:
    "The configuration name [<ProjectName>] and type [SQL] is not defined.
    Detail: The connector must be configured in the appropriate context."
    I upgraded from 10.3.1 to 10.3.2, but did not help. Still my own project and another svn-branch of his project do work.
    Anybody any ideas on where to look?
    Thanks in advance.
    Regards,
    Martien

    I found out that the folder must be the same as in the project file.

  • Build failed:"Message type not defined" - can't dereference schemas in MDS?

    Hi,
    I'm trying to write my first ABCS using the WorkerEBM & EBO.
    I used the AIA service component wizard to generate the composite app. When I try to build it I get the error:
    *Error(66): WSDL messageType "{http://xmlns.oracle.com/EnterpriseServices/Core/Worker/V1}CreateWorkerReqMsg" of variable "CreateWorkerAppReqMsg" is not defined in any of the WSDL files*
    I can browse soa-mds connection from jdeveloper and navigate (using [ctrl-click]) from my composite to the wsdl and through to the schema - so JDeveloper can find all the necessary resources at coding time.
    It can take up to 40 seconds to query and view the AIAMetadata subfolders this way.
    Could the build script be timing out while querying soa-mds for resources at build time? Is there a timeout config that can be extended?
    FYI: I had to add the jdbc-password of the MDS store to adf-config.xml to get past a password failure message in scac.log.
    Thanks
    ...Garret

    Hi,
    I'm trying to write my first ABCS using the WorkerEBM & EBO.
    I used the AIA service component wizard to generate the composite app. When I try to build it I get the error:
    *Error(66): WSDL messageType "{http://xmlns.oracle.com/EnterpriseServices/Core/Worker/V1}CreateWorkerReqMsg" of variable "CreateWorkerAppReqMsg" is not defined in any of the WSDL files*
    I can browse soa-mds connection from jdeveloper and navigate (using [ctrl-click]) from my composite to the wsdl and through to the schema - so JDeveloper can find all the necessary resources at coding time.
    It can take up to 40 seconds to query and view the AIAMetadata subfolders this way.
    Could the build script be timing out while querying soa-mds for resources at build time? Is there a timeout config that can be extended?
    FYI: I had to add the jdbc-password of the MDS store to adf-config.xml to get past a password failure message in scac.log.
    Thanks
    ...Garret

  • Error message (Competitor not defined )

    when i create customer as a competitors has account group 0006  ..... and go to create new material as competitor products (Material type WETT)  and  i put number of competitor  at basic data screen in competitor sub screen ... this message appear (this competitor not defined but i  created this competitor

    Dear h.abozied,
    Is this issue in a CRM system or ECC system? Could you please provide the message number?
    Thank you and best regards,
    Ian Kehoe

  • Photoshop won't activate says I'm not connected to the i-net when I am

    Trying to get my Photoshop Elements 12 to run but it says I am not on the I-net when I am. I tried the instructions for offline activation with no luck

    Sign in, activation, or connection errors | CS5.5 and later
    Mylenium

  • Error-Message "Item not defined on current page" after Page submit - AJAX

    Hello,
    a lot of subpages (regions) are loaded over htmldb_get and displayed on a master page.
    The parts loaded over AJAX are reports. The report regions of these reports contain a hidden and protected field, which hold the page number (&APP_PAGE_ID.)
    This was necessary because I had to overwrite the standard pagination function $a_report on the master page. Otherwise the standard pagination function uses always the page number of the master page and not the page number of the loaded subpages. The overwritten function $a_report is placed in the master page header and searchs for the hidden + proteced field, containing the page number of the loaded subpage.
    This works already fine.
    But after submitting the master page with before loaded subpages over htmldb_get, I get following error message:
    Error Item ID (15348310159873659) is not an item defined on the current page .
    Setting the hidden + protected field on the subpage to never display, the error message disappear, but the pagination function doesn´t work any more.
    Where is the mistake I made?
    Greetings
    Michael

    Hello Ben,
    yesterday evening I read in short your answer, but today I can´t see your answer. Have you edited it again?
    My pagination function works fine and I would maintain it if possible.
    But now a new feature is requiered, which require a submit on the master page. The submit on the master page is not possible due to the hidden field on the loaded subpage, containing the page number for the pagination function.
    Using a normal text field (not saving state) works as long as the text field is visible (condiational view != never). But this information shouldn´t be visible to the user.
    I thought, perhaps a cleanworkaround exists.
    As dirty workaround I could place the information about the actual page number in the report themself (static invisible column). But as soon as the column is invisible (not shown), I have no access on this value
    With a normal hidden html-input-element (not a APEX-Item) in the report regions header of the subpage, holding the page number, I get a http 400 error on page submit.
    An I-Frame is not really a solution, because the master page contains several subpages, which should only be loaded and displayed on demand and not immediatly on page load.
    Greetings
    Michael
    Edited by: user6044915 on 31.03.2009 00:27

  • "multimedia message settings not defined"

    Just got a new Nokia 6233. It's driving me mad trying to send a picture attachment. Every time I get this same error message. Of course, no help in the user guide or
    any mention of this error message. Anybody know what it means and how to overcome it please?

    Hi Mikeos, Sorry to hear that you are still having issues sending and receiving MMS. If everything is set up on the phone correctly it maybe a case of having it activated on your Vodafone account. I would like to look into this for you, please fill in Vodafone's Online Contact Form using the link below. https://online.vodafone.co.uk/dispatch/Portal/appmanager/vodafone/wrp?_nfpb=true&_pageLabel=Page_Hel... Please enter the code FIT135 into the body of your email to ensure that it comes through to our department. Fill in as much information as possible to allow me access to your account with out having to ask for further information. I look forward to hearing from you. Techgirl Vodafone UK

  • Handling fault messages in BPM

    Hi,
    I am using BPM for a RFC to SOAP scenario to handle Fault messages. (Please have a look at my previous post also SOAP Fault message )
    I have created an exception block in BPM to catch the fault message from SOAP service. Inside the exception block i need to map the fault message to RFC response. But fault message is not accessible in Exception block.
    Let me know if you have any idea to solve this.
    Thanks,
    Uma

    Uma:
    Let me make clear the requiremt. You have RFC Import(aka Request message) and Export(aka Response + Exception) and you have Web Service with Request, Response, Fault messages. And you want to send the fault messages back to the RFC in addition to the response. I was wondering, If we do the following mapping without BPM, does that fulfill your requirement.
    RFC-Import <----
    > SOAP Request
    RFC-Export <----
    > SOAP Response
    RFC-Export <----
    > SOAP Fault
    Can you let me know if you face any problems with this one. I have seen your other thread and was wondering, whats the problem is. May be I didn't understand the requirement properly. Please clarify me

  • Emulate Fault message in BPM

    Hello
    I have read all related topics
    fault message in BPM process
    Alert monitoring and fault message types
    Using Fault Message Type in BPM
    but no answer..
    I have synch BPM that send synch request to RFC and a mapping step. Then I have to catch exception (of send step or mapping) and send fault message in exception handler.
    I haven't a proxy. I want to create fault message manually and send it. Is it possible? I cannot create an interface of fault message type.

    Hi Sergey,
    As far as I know, it's possible to catch the mapping/send exception.
    It's also easy to define an exception branch for this exception, and inside the exception branch, send a "normal" message in a send step.
    However, as far as I know there's no way of specifying a BPM send step that sends a fault message.
    At least in my experience, regular messages are just as useful when sending error information.
    Cheers,
    Ofer

  • BPM + PROXY + Fault Message

    Hello
    My scenario is JDBC -> BPM <-> Proxy
    I developed a BPM has a step-type <SENDER> that is synchronous.
    Information on the above step:
      . The message interface used an output, an input message and also a Fault Message.
    . I'm calling a proxy in the ECC and runs an exception if an error occurs in the application (inside the proxy).
      . This exception is returned to the BPM and I run a <block> to handle the exception.
    My need is to capture the contents of the exception in the BPM and send this text to another application.
    How do I recover the contents of the exception returned by Proxy in BPM?
    Thank you,
      Aroldo

    Hi, it is not supported in the meaning that the payload of the fault message is not returned to the integration process, so that's right Baskar. The only thing possible is to trigger exceptions for fault messages, see [Sending Messages from Integration Processes Synchronously -> Procedure -> Specify Exceptions|http://help.sap.com/saphelp_nw73/helpdata/en/43/6211331c895f6ce10000000a1553f6/content.htm].
    Possible solutions:
    If it is a custom proxy you could change the behavior so that no fault messages are triggered. Instead you return the error message in the payload structure of the response.
    If it isn't a custom proxy you could create a custom proxy wrapper with a separate structure for exceptions in the response. Call the implementation of your desired proxy in the wrapper implementation, handle the exception and return the exception contents in the separate structure of the response.
    Or you could try to create a data type enhancement for exception contents for the response message, create a proxy from the enhancement, and implement the OUTBOUND_PROCESSING method where you copy the exception messages to the structure of the data type enhancement.
    Regards, Martin

  • Synchronous File- Soap scenario with fault message

    Hi!
    I have a File to Soap synchronous scenario.
    All is right when no exception is returned by the web service.
    I want to use fault messages to catch thoses exceptions, so I have added fault message in message interfaces and in the mapping program in the interface mapping.
    Now, when the web service return an exception like :
    <soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/">
       <soap-env:Body>
          <soap-env:Fault>
             <faultcode>soap-env:Client</faultcode>
             <faultstring xml:lang="en">NOT_CREATED</faultstring>
             <detail>
                <n0:Z_WS_CREATE_WAGON.Exception xmlns:n0="urn:sap-com:document:sap:rfc:functions">
                   <Name>NOT_CREATED</Name>
                   <Text> does not have packaging material type and is therefore not a pack.mat.</Text>
                   <Message>
                      <ID>HUSELECT</ID>
                      <Number>041</Number>
                   </Message>
                </n0:Z_WS_CREATE_WAGON.Exception>
             </detail>
          </soap-env:Fault>
       </soap-env:Body>
    </soap-env:Envelope>
    I get the following error :
    <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
       <SAP:Category>XIServer</SAP:Category>
       <SAP:Code area="MAPPING">NO_MAPPINGPROGRAM_FOUND</SAP:Code>
       <SAP:P1>http://www.arcelormittal.com/radis/rad IM_RAD_to_ZWsCreateWagon</SAP:P1>
       <SAP:P2 />
       <SAP:P3 />
       <SAP:P4 />
       <SAP:AdditionalText />
       <SAP:ApplicationFaultMessage namespace="" />
       <SAP:Stack>Interface mapping http://www.arcelormittal.com/radis/rad IM_RAD_to_ZWsCreateWagon does not exist in runtime cache</SAP:Stack>
       <SAP:Retry>N</SAP:Retry>
    </SAP:Error>
    My mapping program for fault message is well defined (I tested it with the exception message received from the web service).
    I have also refresh caches, but without success...
    Can anyone help me ?
    Thanks in advance,
    Laurence

    Hey Laurence,
    A File adapter is aysnchronous u cant use for synchrous because it cant acknwlodge the response it gets or itt sends.
    regarding two asynchoronus
    1. file to SOAP asychn.
    2. triggger the second one if SOAP has exception then pass the error from SOAP to New File.
    using BPM we have to use Transportion level acknowledgments
    please reward points if it helps
    Regards
    Sreeram.G.Reddy

Maybe you are looking for