BPM in red status in RWB--Very urgent

Hi all,
I did post installation for PI and its successfully working. In run time workbench everything in green status except the business process engine.It indicates red color.Is there any configuration should we need to do?
Please tell if there is any document and also help me to solve this one.
Regards
Vijay kumar G

Hi,
take a look at this blog by Michal.
/people/michal.krawczyk2/blog/2006/06/22/xi-playing-with-the-file-adapters-acknowledgments
This is a good blog for starters on BPM,
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
Also, this info on theoretical info on BPM can also help you understand how to use BPM better,
http://help.sap.com/saphelp_nw04/helpdata/en/78/62373f58502e48e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/62/dcef46dae42142911c8f14ca7a7c39/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/de/766840bf0cbf49e10000000a1550b0/content.htm
For a blog on how to use Synch / Asynch Bridge, I would suggest this link,
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi
For blog on how RFC is to be used in a BPM,
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
https://weblogs.sdn.sap.com/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken]
I guess you will have to combine all this info and use it in a single BPM.
For more info on Synch/ Asynch Bridge and how to create a BPM:
http://help.sap.com/saphelp_nw04/helpdata/en/62/dcef46dae42142911c8f14ca7a7c39/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ae/fd773f12f14a18e10000000a114084/content.htm
Reward points if helpful
Vishal

Similar Messages

Security status not satisfied.- very urgent - please help me out

hi,
I am using Java card (JCOP v2.241) and eclipse. Few days back I have implemented Caesar cipher and now I have installed another applet for DES... I did not do init update or key ..
Now it is showing me security condition not satisfied.69 82
Aborting execution error.
I did for three times ....the same thing happened...I have searched this forums but I could not get a clear answer.... I donot have any idea abt external authentication..
Now this shows that I cannot access the card. Is it blocked ....
How to unlock it.. Please help me out.. How to delete the applets..
when we use DES to implement should we use any init -update?? .I am using JCOP sample engineering card can I configure it to any other
Any suggestions and replies highly appreciated
Thanks
CM.

1. Where should I run this code. what will it show when I run this. It enumerates all installed applets and packages, currently installed in the JCOP emulator running on TCP port 8050.
2. When I compiled it javac cardinfo.java I got 28 errors. I too. I corrected the code (see my post in the thread "Code Sample: cardinfo for JCOP41V22 Card").
my first error says import com.ibm.jc.*; doesnot exist. should I add this package if so how can I ...You need to add the JCOP-library "offcard.jar" to the project classpath.
Jan

Very urgent:To find IDOC list in RSMO(BI 7.0)

Hi all,
Its very urgent to know,for a particular load IDOCs used to run to process the data&dialogs,in 3.5 we used to get the IDOCs list in RSMO screen itself,but in 7.0 is not having that options,please tell me for a particular load where we can find list of IDOCs?
Regards,
GTR.

Hi,
This info may be helpful.
Transact RFC error
tRFC Error - status running Yellow for long time (Transact RFC will be enabled in Status tab in RSMO).
Step 1: Goto Details, Status get the IDoc number,and go to BD87 in R/3,place the cursor in the RED IDoc entroes in tRFC
queue thats under outbound processing and click on display the IDOC which is on the menu bar.
Step 2: In the next screen click on Display tRFC calls (will take you to SM58 particular TRFC call)
place the cursor on the particular Transaction ID and go to EDIT in the menu bar --> press 'Execute LUW'
(Display tRFC calls (will take you to SM58 particular TRFC call) ---> select the TrasnID ---> EDIT ---> Execute LUW)
Rather than going to SM58 and executing LUW directly it is safer to go through BD87 giving the IDOC name as it will take you
to the particular TRFC request for that Idoc.
OR
Go into the JOB Overview of the Load there you should be able to find the Data Package ID.
(For this in RSMO Screen> Environment> there is a option for Job overview.)
This Data Package TID is Transaction ID in SM58.
OR
SM58 > Give * / user name or background (Aleremote) user name and execute.It will show you all the pending TRFC with
Transaction ID.
In the Status Text column you can see two status
Transation Recorded and Transaction Executing
Don't disturb, if the status is second one Transaction Executing. If the status is first one (Transation Recorded) manually
execute the "Execute LUWs"
OR
Directly go to SM58 > Give * / user name or background (Aleremote) user name and execute. It will show TRFCs to be executed
for that user. Find the particular TRFC (SM37 > Req name > TID from data packet with sysfail).select the TrasnID (SM58) --->
EDIT ---> Execute LUW
Also
Check Note 561880 - Requests hang because IDocs are not processed.
thanks,
JituK

Initialialized delta process(very urgent)

Hi all,
I am loading transaction data into master data table and the update mode is initialized data process.Today the loading were failed showing processing is overdue and i have made the QM status red and deleted the request.When i reran the infopackge its giving the message " delete init request requ_dr1.... before running init with same selection".I have checked in data request this request number is not there.
the datas are loaded daily as "initialized delta processc" update method..
Could anybody tell me how to delete the request and again reload the data..its very urgent...
Thanks
Manjula

hi...
did u upload to target level or not...?where u got the red alert in update level or target level...?before dis you should know the delta mode functiion...intially you can upload the datas using full mode....if use full mode that will take the datas only once for target...for example....if you are loading 40 records...when the uploading process method have done without any mistakes...it's showing 40 records in the target level also..
DELTA MODE:
but you are getting only 30 records...you may upload the remaining 10 datas by delta mode function...through a new source file...
if you can't get my point ...mssg me....
regards,
ramanan..

How to write code for this logic, plz help me very urgent

Hi All,
i am new to sap-abap, i got this work and i m working on this can any body help me in writing code, plz help me, this is very very urgent.
here i m giving my logic, can anybody send me the code related to this logic.
this is very urgent .
this program o/p should be in ALV format and need to create one commond 'SAVE" on this o/t list if user clicks save processedon and processedby fields in ZFIBUE should be updated automatically.
i am creating one custom table zfibue having fields: (serialno, bukrs, matnr,prdha,hkont,gsber,wrbtr,budat, credate, cretime,processed, processedon, processedby,mapped)
fields of zfibue:
serailno = numc
bukrs = char
matnr = char
prdha = char
hkont = char
gsber = char
wrbtr = char
budat = date
credate = date
cretime = time
processed= char
processedon = date
processedby = char
mapped = char      are   belongs to above type data types
and seelct-optionfields: s_bukrs for bseg-bukrs
                                    s_hkont for bseg-hkont,
                                     s_budat for bkpf-budat,
                                     s_processed for zfibue-processed,
                                      s_processedon for zfibue-processedon,
                                      s_mapped. for zfibue-mapped
parameters: p_chk1 as checkbox,
                  p_chk2 as checkbox.
                  p_filepath type rlgrap-filename.
1.1 Validate the user inputs (S_BUKRS and S_HKONT) against respective check tables (T001 and SKB1). If the validation fails, provide respective error message. Eg: Invalid input for Company Code.
1.2 Fetch SERIALNO, BUKRS, MATNR, PRDHA, HKONT, GSBER, WRBTR, BUDAT, CREDATE, CRETIME, PROCESSED, PROCESSEDON, PROCESSEDBY, MAPPED from table ZFIBUE into internal table GT_ZFIBUE where BUKRS IN S_BUKRS, HKONT IN S_HKONT, BUDAT IN S_BUDAT, PROCESSED IN S_PROCESSED, PROCESSEDON IN S_PROCESSEDON, and MAPPED IN S_MAPPED.
1.3 If P_CHK2 = X, go to step 1.11. Else continue.
1.4 If P_CHK1 = X, continue. Else go to step 1.9
1.5 Fetch MATNR, PRDHA from MARA into GT_MARA for all entries in GT_ZFIBUE where MATNR = GT_ZFIBUE-MATNR.
1.6 Sort and delete adjacent duplicates from GT_MARA based on MATNR.
1.7 Loop through GT_ZFIBUE where PRDHA = blank.
          Read Table GT_MARA based on MATNR = GT_ZFIBUE-MATNR.
          IF sy-subrc = 0.
                 Move GT_MARA-PRDHA to GT_ZFIBUE-PRDHA.
              Modify Table GT_ZFIBUE. Update Product Hierarchy
             Endif.
    Fetch PRDHA, GSBER from ZFIBU into GT_ZFIBU for all entries in GT_ZFIBUE where PRDHA = GT_ZFIBUE-PRDHA.
    Read Table GT_ZFIBU based on PRDHA = GT_ZFIBUE-PRDHA.
          IF sy-subrc = 0.
                 Move GT_ZFIBU-GSBER to GT_ZFIBUE-GSBER.
              Move X to GT_ZFIBUE-MAPPED.
              Modify Table GT_ZFIBUE.
             Endif.
Endloop.
1.8 Modify database table ZFIBUE from GT_ZFIBUE.
1.9 Fill the field catalog table GT_FIELDCAT using the details of output fields listed in section Inputs/Outputs (above).
   Eg:                 LWA_ FIELDCAT -SELTEXT_L = 'Serial Number.
                          LWA_ FIELDCAT -DATATYPE = NUMC.
                          LWA_ FIELDCAT -OUTPUTLEN = 9.
                          LWA_ FIELDCAT -TABNAME = 'GT_ZFIBUE'.
                          LWA_ FIELDCAT-FIELDNAME = 'SERIALNO'.
          Append LWA_FIELDCAT to GT_FIELDCAT
Note: a) The output field GT_ZFIBUE-PROCESSED will be editable marking INPUT = X in field catalog (GT_FIELDCAT).
         b) The standard ALV functionality will be used to give the user option for selecting all or blocks of entries at a time.
         c) The PF-STATUS STANDARD_FULLSCREEN from function group SLVC_FULLSCREEN will be copied to the program and modified to include a SAVE button.
1.10 Call the function module REUSE_ALV_GRID_DISPLAY passing output table GT_ZFIBUE and field catalog GT_FIELDCAT. Additional parameters like I_CALLBACK_PF_STATUS_SET (= ZFIBUESTAT) and I_CALLBACK_USER_COMMAND (=HANDLE_USER_ACTION) will also be passed to handle user events. Go to 2.14.
1.11 Download the file to P_FILEPATH using function module GUI_DOWNLOAD passing GT_ZFIBUE.
1.12 Exit Program.
Logic to be implemented in routine Handle_User_Action
This routine will have the following interface:
FORM Handle_User_Action USING r_ucomm LIKE sy-ucomm
                                                           rs_selfield TYPE slis_selfield.
ENDFORM.
Following logic will be implemented in this routine:
1.     If r_ucomm = SAVE, continue. Else exit.
2.     Loop through GT_ZFIBUE where SEL_ROW = X. Row is selected
a.     IF GT_ZFIBUE-PROCESSED = X.
i.     GT_ZFIBUE-PROCESSEDON = SY-DATUM.
ii.     GT_ZFIBUE-PROCESSEDBY = SY-UNAME.
iii.     MODIFY ZFIBUE FROM work area GT_ZFIBUE.
Endif.
Endloop.

Hi Swathi,
If it's very very urgent then you better get on with it, don't waste time on the web. Chop chop.

Very urgent regarding ALV

Hi all,
I have displayed data in alv.and the error condition is that if for a material if it has more than one S as ok_status records then it should throw an error. This logic is working fine.
Now suppose at first time user had entered S through keyboard which fails the condition so it throws an error first time.
Now user can change the ok status back to I or O from S (through keyboard although f4 help is available) which satisfies the conditon so that record should be saved. but when user presses save button then in the ALV display the changed status I or O for that record again converted back to status S automatically. and again gives an error.
if we try third time then it allows to save with record other than s ok status i.e. I or O.
this problem is comming only when we change the value through keyboard. If we select value using f4 help then whole logic is working fine, no problem at all.
Can you please help me out in this regard
Its very urgent.
Thanks & Regards
Ashutosh.

Hi,
to exclude toolbar buttons..
DATA: LT_EXCLUDE TYPE UI_FUNCTIONS.
DATA LS_EXCLUDE TYPE UI_FUNC.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_COPY_ROW.
APPEND LS_EXCLUDE TO LT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_DELETE_ROW.
APPEND LS_EXCLUDE TO LT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_APPEND_ROW.
APPEND LS_EXCLUDE TO LT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_INSERT_ROW.
APPEND LS_EXCLUDE TO LT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_MOVE_ROW.
APPEND LS_EXCLUDE TO LT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_COPY.
APPEND LS_EXCLUDE TO LT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_CUT.
APPEND LS_EXCLUDE TO LT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_PASTE.
APPEND LS_EXCLUDE TO LT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_PASTE_NEW_ROW.
APPEND LS_EXCLUDE TO LT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_UNDO.
APPEND LS_EXCLUDE TO LT_EXCLUDE.
CALL METHOD G_GRID1->SET_TABLE_FOR_FIRST_DISPLAY
    EXPORTING
<b>      IT_TOOLBAR_EXCLUDING = LT_EXCLUDE</b>
      IS_LAYOUT            = GS_LAYOUT
    CHANGING
      IT_FIELDCATALOG      = IT_FIELDCAT
      IT_OUTTAB            = IT_FINAL[].
and you told you are using REUSE_ALV_GRID_DISPLAY_LVC
then in the user_command do this....
then your problem will be solved.
in the top you declare this..
DATA: REF_GRID TYPE REF TO CL_GUI_ALV_GRID.
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
                         RS_SELFIELD TYPE SLIS_SELFIELD.
*then insert the following code in your USER_COMMAND routine...
IF REF_GRID IS INITIAL.
    CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
      IMPORTING
        E_GRID = REF_GRID.
ENDIF.
IF NOT REF_GRID IS INITIAL.
    CALL METHOD REF_GRID->CHECK_CHANGED_DATA
ENDIF.
ENDFORM.
Regards
vijay

Very urgent, vendor down payment clearing - ka doc type

hello gurus,
while clearing vendor down payment, some down payment entries are posted as ka doc type. now i have to clear the invoice down payment with the ka doc type. how to do this.
for retention account we booked in special G now that retention money also paid but that doc is not showing as cleared. still it showing in red colour. but balance is nill. what to do for this..
can anybody help me very urgent friends
thanks
jaya

HI ,
CHECK THI SPROCEDURE ,
DOWN PAYMENT;
Vendor A/C--a DR1
TO Bank
Invoice;
Expence a/c dr
to Vendor----
2
down payment clear:
Vendor A/C-----Adr -
3
to Vendor a/c----4.
Hi once you do the Down payment clearing only 1 & 3 line items will be cleared.
but 2&4 line items will show as open items .
This line items you have to clear .Clear this in F-44.
CHANDRA

Very urgent: call servlet from JSP

Hello,
I'm facing a problem in invoking a servlet from a JSP having the JSF components.
The application has a text field to implement ajax for search functionality in the database .I have written a servlet to make the database connection and fire the querry.
Ajax implementation in a js file is called on every keyup event in the jsp file,and
a call is given to the servlet from the ajax methode.
The function in the js file is as follows:-
function getPersonByFirstNameXML( firstName ) {
    if (!firstName) {
        clearPersonByFirstNameXML();
    } else {
        var url = BASE_URL + "/servlet/get_PersonsXML";
        alert(url);
        return new AJAXRequest("post", url, "firstName=" + encode(firstName), processGetPersonByFirstNameXML);
}Im getting the myAJAX.status value as 500.
I think I'm not able to access the servlet properly.
what changes do i need to make in the we.xml file ?
and what should be the url to be passed.
Please provide me a sloution to the above problem as it is very urgent else if anybody is aware of a readymade JSF componet with search functionality freely available please let me know.
PS:
The sample application named RedirectionExample which makes use of a servlet and would be of help to you. You can find the tutorial on the following page:
http://developers.sun.com/prodtech/javatools/jscreator/reference/codesamples/sampleapps.html
is not available as stated in some of the suggestions by Author: mayagiri
Thanks for any help.
Abhi

the status 500 generally means either HTTP server internal error or that execution of CGI script or servlet aborted with error.
It can be reasonably supposed that the request reaches the servlet, ie. that "url" value points to some existing servlet, otherwise most probably the status value would be 404.
To test that the servlet is working i'd try to access it using some simple html page with form like this (with {BASE_URL} replaced by real value):
<form method=post action={BASE_URL}/servlet/get_PersonsXML>
<input type=text name=firstName>
<input type=Submit>
</form>

Error in Personnel Data Iview (its very urgent)

Hi All,
Personal Data
Critical Error
A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
Please contact your system administrator.
failed to create or init instance of model 'com.sap.xss.hr.per.in.pdata.model.HRXSS_PER_P0002_IN' in scope APPLICATION_SCOPE with instanceId 'null'
Caused by: com.sap.tc.webdynpro.progmodel.model.api.WDModelException: failed to create instance of model 'com.sap.xss.hr.per.in.pdata.model.HRXSS_PER_P0002_IN'
     at com.sap.tc.webdynpro.progmodel.model.api.WDModelFactory.getNewModelInstance(WDModelFactory.java:392)
     at com.sap.tc.webdynpro.progmodel.model.api.WDModelFactory.getOrCreateModelInstanceFromScopeMaintainer(WDModelFactory.java:329)
     ... 65 more
Caused by: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: no jcoMetadata found for RFC function 'HRXSS_PER_GET_F4_P0002_IN'! Please verify, that your model is consistent with the ABAP backend: 'EC6'.
Hi Please help me to solve this error it's very urgent ?
thanks and regards,
Phanikumar.

Hi,
I am not very much sure about this.
Are u calling a BAPi from WD application?
If yes then the error seems to be that : JCOs metadata is not available.
Please check that ur JCO definitions in portal and make sure the name in Portal and the name u defined in WD application are same( case sensitive).
Also TEST JCO in Portal.
Please revert back with current status and explain ur problem a bit more.
Regards,
Sumit

How to test Scenario with AS2 adapter..!!!Very Very Urgent..!!

Hi All,
We have provided the partner details like AS2ID,URL,Port and certificates.
They ask me to do some sample testing whether files are reaching to partner system or not.
I done all the required steps in IR and ID...
1. Can anyone suggest me how to do the testing
2. Where to monitor for AS2 messges?
3. How to see the our output files whether we are sending the correct files or not?
4. Outbound -- How we will come to know whether file reached to partner or not?If we set sync Mdn.. where we can see the MDN..?
5. Inbound-- How we will come to know whether file has sent to us or not?
Someone pls explain step by step how to do the testing using AS2 adapters for both Outbound and Inbound.
Its Very Very urgent.
Waiting for your replys..
Regards
Deepthi.

Hi Deepthi,
1. Can anyone suggest me how to do the testing
A) Like message monitoring in RWB we have a particular link to monitor the message through differnt seeburger adapter.
I dont remember the link right now.
2. Where to monitor for AS2 messges?
A) Through the same link.
3. How to see the our output files whether we are sending the correct files or not?
A) u mean to check the output file data or strucutre if strucutre is not proper then u will get the error message and ur mapping fails.
4. Outbound -- How we will come to know whether file reached to partner or not?If we set sync Mdn.. where we can see the MDN..?
I have no idea.
5. Inbound-- How we will come to know whether file has sent to us or not?
File is sent over wan so when it will be pickd up by XI.
Thnx
Chirag

Adapter type missing - very urgent

Hi all,
We have installed PI 7.0, SP12. when we click on the adapter type in the integration directory - the window is empty. we have a central SLD which is solution manager. we have imported the sap basis content 7.0 and 7.1.. is there any other configuration that has to be checked
Very urgent
Regards
Arun
Message was edited by:
        Arunkumar sukumar

When i check in the RWB, the adapter monitor shows an error in
---> Adapter Engine MXD (mbixidev)
        http://sap.com/xi/XI/System
    JPR - this shows an error in it and says -
SLD access SLD host:port = 10.10.40.197:50000
Error getting JPR configuration from SLD. Exception: No entity of class SAP_BusinessSystem for MXD.SystemHome.mbixidev found
No access to get JPR configuration
Regards
Arun

Business Process Engine is showing Red Led in RWB

Hello to All, I installed PI7.1 and after client copy - Business Process Engine is showing Red Led in RWB.
When I click on BPE, the message at bottom of screen (in Yellow Status) indicates " Schedule background job for clearing report". Please let me know if any one has the solution with details.
I gone thru the link in SDN, but no resolution yet.
Re: Business Process Engine is showing Red Led in RWB
thanks, Srini

Hi Mark, All the nodes are green under "Maintain Runtime Environment" and "Maintain Definition Environment".
In RWB, component monitoring --> Display -- Business process engine is RED with message as
"Schedule background job for clearing report" in Yellow.
I looked under batch jobs "SWWCLEAR" and it is already ran successfully.
Please let me know how can i make BPE green.
thanks, Srini
Edited by: Srinivas Chatrati on Apr 20, 2009 11:51 PM

Error: dbms_java.end_import() IMp-00017 -- Very urgent

Hi All,
Please help me. It is very urgent.
I took export backup from oracle10g (IBM AIX)database using oracle9i client (9.2.0.6) to inport the dump in oracle 9.2.0.6 in solaris. I am getting the following error.
Export file created by EXPORT:V09.02.00 via conventional path
import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
import server uses WE8ISO8859P1 character set (possible charset conversion)
IMP-00017: following statement failed with ORACLE error 3113:
"BEGIN :STATUS := DBMS_JAVA.END_IMPORT(); END;"
IMP-00003: ORACLE error 3113 encountered
ORA-03113: end-of-file on communication channel
IMP-00000: Import terminated unsuccessfully
please help me ....
Thanks and Regards,
Kiran

Hi all,
very very urgent please help me..
Thanks and regards
Kiran

Its very urgent:how to insert data into database tables

Hi All,
I am very new to oaf.
I have one requirement data insert into database tables.
here createPG having data that data insert into one custom table.
but i dont know how to insert data into database tables.
i wrote the code in am,co as follows.
in am i wrote the code:
public void NewoperationManagerLogic()
ManagerCustomTableVOImpl vo1=getManagerCustomTableVO1();
OADBTransaction oadbt=getOADBTransaction();
if(!vo1.isPreparedForExecution())
vo1.executeQuery();
Row row=vo1.createRow();
vo1.insertRow(row);
in createPG processrequest co:
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
ManagerInformationAMImpl am=(ManagerInformationAMImpl)pageContext.getApplicationModule(webBean);
am.NewoperationManagerLogic();
process form request:
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
if(pageContext.getParameter("Submit")!=null)
ManagerInformationAMImpl am=(ManagerInformationAMImpl)pageContext.getApplicationModule(webBean);
am.getOADBTransaction().commit();
please help with an example(sample code).
its very urgent.
thanks in advance
Seshu
Edited by: its urgent on Dec 25, 2011 9:31 PM

Hi ,
1.)You must have to create a EO based on custom table and then VO based on this EO eventually to save the values in DB
2.) the row.setNewRowState(Row.STATUS_INITIALIZED); is used to set the the status of row as inialized ,this is must required.
3.) When u will create the VO based on EO the viewattributes will be created in VO which will be assigned to the fields to take care the db handling .
You must go thtough the lab excercise shipped with you Jdeveloper ,there is a example of Create Employee page ,that will solve your number of doubts.
Thanks
Pratap

Capex budget using Internal Oder - very urgent

Dear All
My requirement is to use statistical internal order to control the capex budget. I have created stat order , activated commitment management, availability control. and assigned order number in asster master.
But the problem is when creating purchase requisition the system should be a warning or information as per the availability control . to do this what should i do ?
Please respond .. its very urgent for me
regards
Venkat

Thank you Sridevi and Murali for the responses .
I want to do the aquisition of fixest asset using PR-PO-MIGO-MIRO . The system should react as per the available budget by giving warning / error at the time of PR itself. one more thing is i need not give order nuber in PR or PO as suggested by Murali . The system deriving IO number from the Asset master.
Now its working perfectly .
Now i found the reason for not working earlier .
I have done all the settings relating to Order type, Budget Profile , Availability Control every thing .
I have not done the following setting in the asset module :
In order for you to be able to makes this automatic statistical posting, all of the following must apply:
     The acquisition transaction types in Asset Accounting have to be designated as relevant to the budget.
     The APC asset balance sheet accounts have to be defined as statistical cost elements.
     The APC asset balance sheet accounts have to have a field status definition that allows additional account assignment to orders or WBS elements.
I have rectified the above now . I hope this will help others who have the same requirement
best regards
Venkat

BPM in red status in RWB--Very urgent

Similar Messages

Maybe you are looking for