BPM in SAP NetWeaver: do you really like and use it?

Dear friends,
BPM (Business Process Management) is the metodology for reorganization and
optimization of business processes.
And BPMS (Business Process Management System) is software for BPM.
BPMS must support full life cycle of business process: design, modelling,
execution and monitoring.
As I understand ccBPM is intended only for automated processes.
Do you really use integration processes ccBPM?
How often do you apply ccBPM for business processes?
Please describe real examples of ccBPM applying.
Do you apply the standard content - integration processes in IR and patterns or do you implement your own integration processes?
How do you implement the business processes required human task and automated
system task, that is combination of workflow and ccBPM?
Thanks for your response in advance,
Natalia.

> Do you really use integration processes ccBPM?
Depends on the requirment..but most of the time we have to avoind to use BPM in interface as much as possible because of performence issue.
> How often do you apply ccBPM for business processes?
Completely based on the requirement..like Multimapping, throwing alerts based on receiver response etc.
> Please describe real examples of ccBPM applying.
Systems A send the messge to Systems B and A get the response. Now if the response is ok then I will send the same message to System C else I will tell admin Error occured. This is just the only one case..ther can be many.
> Do you apply the standard content - integration
> processes in IR and patterns or do you implement your
> own integration processes?
You can look on the patters in the IR SAP BASIS software component
> How do you implement the business processes required
> human task and automated
> system task, that is combination of workflow and
> ccBPM?
Refer these link for more clarification and examples
http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/frameset.htm
http://www.sap.com/platform/netweaver/pdf/BWP_NetWeaver_BPM.pdf
Thanks
Farooq.
<b>
*Rewards Points if you find it useful*</b>

Similar Messages

My new mac book pro will not save any bookmarks I make in safari. Why is it doing this? I would really like to use my bookmarks.

MY new Mac book pro will not save any of teh bookmarks I make in safari. If I make a bookmark, it will not appear until I close safari and reopen it. Then, if I shut my computer down and reopen safari, all of the bookmarks are gone. This has happend multiple times and I don't know what is going on. I would really like to use my bookmarks.

Delete the
com.apple.safari.plist
reboot and start Safari, reset your preferences, instructions are here
Deleting the System Preference or other .plist file

I like and use Top Sites but it has become unsuable with this constant blacking out and reloading the thumbnails. My MBP has not seen a problem at all. I have been searching every other day for over a month trying to find a fix in Windows Safari with n

I like and use Top Sites but it has become unsuable with this constant blacking out and reloading the thumbnails. My MBP has not seen a problem at all.
I have been searching every other day for over a month trying to find a fix in Windows Safari with no joy. I want to resolve, not switch browsers. Please offer up a solution that only refreshes the Top Site thumbnails once a day or as some controlable interval. Started about two versions ago, now on ver 5.1.5. Windows 7 64bit.
Safari 5.1.5 for Win64 bit, Windows 7!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

I think I solved the wifi connection problem, just by switching off completely the router! sounds trivial, but in this case it worked!!!
the funny behaviour of the trackpad/cursor still persists. any suggestion???
thanks again

Can you stream video and use the computer at the same time on a mac mini with hdmi

Can you steam video and use the computer at the same time? I have a mac mini with hdmi.

Shouldn't be a problem, unless you want to view it in Full Screen Mode at the same time with only one display.

SAP Netweaver ABAP Development 7.0 and Kaspersky IS 2010

Hi All,
Iu2019m trying to figure out how to make KIS 2010 and SAP Netweaver work together but so far I couldnu2019t find a u201Cgoodu201D solution.
The only way that I figured out so far, to make it work, is turn off the u201CApplication Controlu201D on KIS2010.
Do you know some exceptions that I can insert to u201Copenu201D the kaspersky for the SAP applications?
Thank you very much in advance.
Regards
Antonio Centenaro

Hi,
You should ask Kaspersky support about this issue. It is not a SAP problem !
Regards,
Olivier

SAP NetWeaver 04s SP7 Java Version And SAP NetWeaver 04s ABAP Version

Hello,
I would like to ask if anyone has installed both Java and ABAP version on PC/Notebook.
What did you install first and why?
When installing the second of the two, did you need to turn off or detete any part of first installation?
Any advice on the installation of both versions on one PC would be appriciated.
Thank You,
Spiro.

Hi. I have installed NW04s ABAP stack and the NW04 Java stack(slim edition) on my laptop. I installed ABAP first, then the java stack. I did do it the other way around, but the ABAP stack would not load successfully, so remember ABAP first, then java. No, did not turn off or delete anything from the abap installation.
Regards,
Rich Heilman

SAP NetWeaver 7.3 SPS 05 and NetWeaver Business Client NWBC 3.5 Error

Hi Experts,
I was using SAP Portal 7.3 and NWBC 3.5 and they were working OK.... After applying SPS 05 I got this error after login into my NWBC 3.5 Patch 3 (last release)...
No Content Available
Contact your administrator
And there is no content at all. Next to my search Quick Launch there is a message that says empty node
After checking the log trace of NWBC there is no content in my bode. The log goes:
================================================================
HHHHHH                     Exception                      HHHHHH
================================================================
WebException: Error en el servidor remoto: (500) Error interno del servidor.
   en System.Net.HttpWebRequest.GetResponse()
   en com.sap.nw.nwbc.csruntime.implementation.navigation.core.CsNavigationVirtualRoot.DoGZIPRequest(String url, String postData, String& responseData, Boolean addSapClientAndNwbcContext)
11:44:09.997 [main] E         Body of error response is EMPTY
11:44:11.975 [main] E         DoXmlGzipRequest failed
In my Portal I got Roles assigned. This error occured after applying SPS05 into SAP EP 7.3.
Regards
David Cortes

Hi David,
I am leaning towards SSL. We are not using SSL in our environment and I believe that by default in a NW7.3P5 portal the WSConfig (?) services require SSL. When doing a security trace from within the portal via NWA I am receiving:
"POST /ConfigurationWS/ConfigurationWSConfig?wsdl&style=document&mode=standard HTTP/1.1
content-type: text/xml; charset=utf-8
accept-encoding: gzip, deflate
user-agent: NWBCClient v1.0"
"process()
[EXCEPTION]
com.sap.engine.interfaces.webservices.runtime.ProtocolExceptionExt: SSL required for this call. For details see log entry .
at com.sap.engine.services.wssec.srt.protocols.ProviderSecurityProtocol.logThrowable(ProviderSecurityProtocol.java:1204)"
Unfortunately I don't have a NW7.3 system pre SP5 to see if it was a support pack change or the default in a NW7.3 system.
Looking at the service definition for ConfigurationWSSI in the Configuration and Security Tabs you can see the transport protocol is defined as HTTPS.   If I can change the ConfigurationWSSI and the NavigationWSVi (?) to HTTP protocol it gets past the SSL check but then I receive other exceptions. Unfortunately I don't have the time to investigate further.
Regards
Craig

I would really like to use this product but can't find the OPEN to click on it

The instructions I printed off look so simple but where is the OPEn to click on the number 3 say In the convert PDF to editable file dialog box choose a file format from the EXport PDF file to pop up menu where is all this at??????

Hi Easily Convert it,
Sounds like you have an ExportPDF subscription? If so, log on to your account at exportpdf.acobat.com using your Adobe ID and password. When you're logged in, you will see the Select PDF Files to Export button. Click that, then click Choose Files from My Computer. Select the file that you want to convert, and choose the Export format. Finally, click the blue Export button.
Please let us know if you need further assistance.
Best,
Sara

I'm currently using Windows 7 and I'm having Issues playing or loading music on any websites online when I use Firefox. I would really like to use Firefox over the other browsers but it's having issues loading any kind of music on every website I tried.

I am using A Toshiba with Window 7 and cannot load or play music from the internet on any website. I have no problems with other browsers playing music such as Internet Explorer or Google Chrome, just FireFox.

Right-click on your main iTunes folder and click Properties, then go to the Security tab and click Advanced. If necessary grant your account and system full control to this folder, subfolders and files, then tick the option to replace permissions on child objects which will repair permissions throughout the library. This is the XP dialog but Windows 7 shouldn't be too different.
tt2

HT1414 RESETTING RESTRICTIONS PASSCODE - Even after restoring a phone, you cannot bring back your data from the icloud because it brings back the restrictions passcode you cannot remember and used restore to begin with

RESETTING THE RESTRICTIONS PASSCODE - Even after restoring the iphone and bringing back the data from icloud you cannot reset your restrictions passcode as it is stored in the icloud backup.

Hello risenhauer,
Thanks for using Apple Support Communities.
To reset your Apple ID password without knowing your security questions or have access to the email account, you will need to contact Apple Account Security in your country. Links to contact can be found in the article below.
Apple ID: Contacting Apple for help with Apple ID account security
Take care,
Alex H.

How can you share Contacts and use Family Sharing?

Still sharing 1apple ID & 1 iCloud from way back when. Kids were little, syncing was simple... turned off their device iClouds and synced apps, playlist, shows w/ iMac via usb. I loved having my contacts, bookmarks, notes synced via iCloud and it became VERY handy when kid1 got an iPhone (appointments, practices, friends #s w/ ease!) We've recently added a macbook and another iPhone to the mix, we've got music issues & iPads ringing.... so a potential overall may be due?
Now that Family Sharing is here, it's still missing features that we USE:
* Notes (grocery list, packing lists...)
* Contacts (each family member has a 'group' name, they add to their group and the family's master list is 'all contacts' for anyone to access incase of emergencies.... anyone keeping up w/ kids lately?!)
* And the ever present iCloud icon is a looming feature for anyone, any age in the shared-family to be too curious...
* CAN any of these features be added along w/ Family Sharing?
HOW do I set up a simple family sharing system w/o interfering w/ bookmarks, personal notes, FaceTime/msg crossovers :
share our purchases (apps, music from our iTunes/playlists, podcast),
share our calendar
share our contacts
share a family notes
msgs/facetime for each member
mom: iphone, ipad, imac
dad: iphone
kid1: iphone, macbook
kid2: ipad
kid3: ipad
Thanks to anyone that has this set up and will share the method to my madness. Didn't know where to post this, sorry about that.

After having burned the AudioCD from iTunes Menu Advanced choose "Submit Track Names ..."
That will put the data of your CD into CDDB.
It may take between some hour and a few days until it is recognized on a second computer through CDDB.

How to connect SAP R/3- System with SAP NetWeaver Portal (2004s)?

Hello to all,
sorry, can someone help me? How can I connect SAP R/3- System with SAP NetWeaver Portal (2004s)?
Thanks and regards,
Galyna

Hi,
In previous link contain this info
This describes how to connect an SAP R/3 system to SAP NetWeaver Portal using an iView
1)      Go to System Administration
2)      Go to System Configuration
3)      Go to Portal Content (Right Side Panel), open that folder.
4)      Right Click on Portal Content, a Panel is displayed select "System (from Template)".
5)      That will display a new view on right side, now select "SAP system using dedicated application server" from
the existing templates. (Other templates are possible - for example, load balanced or through a SAProuter connection string).
For this exercise, we'll use the simplest type.
6)      Choose next
7)      Give the System Name and System Id (which are mandatory fields) incase you want to give any brief notes
about the system then give them in the "Description" field.
8)      Open the Newly Created System.
9)      Now when you want to create a New System, you have to fill four Properties they are:
"Connector" - contains basic connectivty details
"Internet transaction Server (ITS) - if you wish to use SAPGUI for HTML and/or IACs",
"Web Application Server" - if you wish to access BSPs and/or Web Dynpro for ABAP and
"User Management".
You also need at least one "System Alias" has to be defined from the Display drop down menu.
Make sure you have set end user access in the Permissions drop down menu to all users who need to access the system
10) Select "Connector" property, now fill the required fields such as:
a)      Application Host (should be fully qualified hostname) - Give the R/3 "Application Name",
which can be obtained from the SAP Logon Pad (check what R/3 system you are using, right click on it , go to the properties,
it will open a window which has the Application Server Name.
b)      Logical System Name - Give the logical name as defined in the backend system
c)      SAP Client - Check the Client in the backend system and give the appropriate number (3 digits)
d)      SAP System ID(SID)* - Check the R/3 properties and give the check for System ID
e)      System Type* - Since we are connecting to R/3, select SAP_R3 system.
f)       System Number - This is a two digit number that you can find in the SAP Logon Pad
11) Select "Internet transaction Server (ITS)" property, now fill the required fields like
a)      ITS Description à Give some Description
b)      ITS Host Name - Same as "Application Host" of R/3 (when integrated ITS) and should be attached with the
port number of ITS Server (to get port number detailed description is given below). ex: hostname : port number
c)      ITS Path - To get the path along with the port number you have to Log on to R/3 system. Use the
Transaction Code "SICF", it opens a new window go to:
      default_host -> sap -> bc -> gui -> sap -> its -> webgui -> SAP GUI for HTML -> right click on
that and click "Test Service'. This will open a new window, on the address bar you will find the "port number", and
the path something like (/sap/bc/gui/sap/its/webgui). Use the path after the port number.
d)      ITS Protocol - There are two protocols "http" & "https", select the appropriate protocol which is
visible when you opened "Test Service" window.
12) Select "Web Application Server" property , now fill the required fields like
a)      Web AS Description -> Give some Description
b)      Web AS Host Name - same as ITS Host Name
c)      Web AS Path - usually /sap/bc/bsp/sapd)*
Web AS Protocol - should be same as the ITS Protocol.
13)   Select "User Management" property, now fill the required fields like
a)      Authentication Ticket Type - Since we are not using SSO leave the field
empty i.e. put in select mode. (Please note that longer term you will probably want to use SSO)
b)      Logon Method - Select UIDPW.
c)      User Mapping Type - In case you have administration rights then you choose "admin" or in case you
just have user rights then choose "user", better go for "admin/user".
14)   Since all the required fields are filled appropriately now create a System Alias name, this can be done by following steps:
a) go to Display -> Select "System Aliases" give some Alias Name, let's call it "SAP_R/3"
15) Now that System is created we have to create a iView which will display the given Transaction Code.
16) Go To "Content Administration".
17) Go To "Portal Content".
18) Go to Portal Content (Right Side Panel), open that folder
19) Right Click on Portal Content, a Panel is displayed select "New" -> iView
20) Select iView template, click next
21) Select "SAP Transaction iView" from the list of templates available. Click next.
22) Give the iView name and iView ID. Incase you want to give any brief notes about the iView then give it in "Description" field. Click next
23)   Select "SAP GUI for HTML" radio button. Click next
24) Now select the system which you have create "SAP_R/3", give some Transaction Code, say SE12 (Dictionary Display). Click next and Finish.
25) Now Preview the iView
26) You will see a new Window where in SE12 Dictionary Display window is displayed.
Regards,
Senthil K.

Best Practice to start with SAP NetWeaver BI (BW) to become a BI consultant

Hi there,
I have one Question. As consultant for SAP NetWeaver Portal (Development/Java), I would like to start with SAP NetWeaver BI (System Configuration, Customizing and Development with ABAP/ABAP OO) through e-learning and/or with (e)books.
A system for making practice is available.
Can someone give me a helpful guide how to start and become a BI Consultant for system administration and development within the next 12 months?
Some Questions I have noticed are:
1) The system (application) environment of BI (what is integrated in it - e. g. within the portal, there is a storage for unstructured information like documents or virtual rooms for collaboration between departments - and what does it make)
2) How does development in BI works (development environment, coding, debugging, building, deployment and test) and what is used stronger (ABAP or ABAP OO)? Here, I don't mean how to write ABAP or ABAP OO programs, only the infrastructure from development to transport to a target system
3) How is a BI system to configure as default after installation?
4) Good guides (e/books) to learn ABAP and ABAP OO (as far as possible oriented on the practive)
Of course, these are only a few Question and far from complete. Details and other important points will be appreciated.
Many thanks,
Cengiz

Hi,
1) The system (application) environment of BI (what is integrated in it - e. g. within the portal, there is a storage for unstructured information like documents or virtual rooms for collaboration between departments - and what does it make)
Document management from RSA1 transaction of BI helps to attach any unstructured documents at specific level in BI.
2) How does development in BI works (development environment, coding, debugging, building, deployment and test) and what is used stronger (ABAP or ABAP OO)? Here, I don't mean how to write ABAP or ABAP OO programs, only the infrastructure from development to transport to a target system
BI has got a separate tool and GUI to perform all the Extract, Transform and load related activities. ABAP is part of BI but you don't need much extensive ABAP learning. Basic ABAP is sufficient to write routines and extractors.
3) How is a BI system to configure as default after installation?
May be a BASIS person can help you out here about the configuration but this is not the job of BI person.
4) Good guides (e/books) to learn ABAP and ABAP OO (as far as possible oriented on the practive)
You can search for SAM Series learn ABAP in 24 days book. This book is sufficient to learn the ABAP required for working in BI.
But except ABAP you will have to completly learn the BI system to work efficiently.
Regards,
Durgesh.

SAP Netweaver 7.2 developer edition installing

Hi guys,
I'm a functional consultant and really interested in learning some basics developments stuff in SAP. So I'm trying to install SAP Netweaver 7.2 developer edition, and when I checked the prerequisites in sapins and error came about environment variable CPIC_MAX_CONF and JAVA_HOME
could you guys help me in this ...

Hi,
EHP2:
looking at
https://websmp110.sap-ag.de/ocs-schedules and
https://websmp110.sap-ag.de/pam
it's not released (GA).
br,
Tobias

SAP NetWeaver and SAP ERP Central Component 6.0 installed or not,how to fin

Hello Friends,
I would like to know that in my system whether
<b> SAP NetWeaver and SAP ERP Central Component 6.0</b>
Installed or not?How to check whether these are installed or not?
and where can i Find in the system?
Regards
Preethi

Kinldy make clear cut query before you look for an answer to that!
To check for the WAS-J2EE Stack installation - kindly use the following link to access your WAS j22 Start page "http://hostname:5XX00" where XX will be the System No. for SAP System.
Incase if you want to find out that you have a EP installed: goto:-
"http://hostname:5XX00/irj"
For XI , you can go to "http://hostname:5XX00/rep"
Incase the links work properly the software component is installed.
PREREQUISITE for the above CHECKS:
1) The system number should be correct.
2) The Fully qualified domain name should be used for the hostname.
3) The Software components and the J2EE Stack should be operational.
(ON the SAP SERVER)On OS level --> you can Go and have a look for the following directories existence --->
1) usr/sap/SID/DV*.../j2ee,
2) usr/sap/SID/DV*.../SDM
This means that you have atleast the Java Stack installed on your SAP Server.
Next in the task manager(WINDOWS) / process level(UNIX) you can check if you have process "jlaunch process under the sidadm owner".
In SAP Frontend-GUI :
You can login and go to T-Code ST11 and check for the log files
dev_disp, dev_dispatcher, dev_server0, dev_jcontrol, dev_bootstrapID.......,
these file will give you info regarding the J2ee stack and its components....
Hope this helps you...
Regards,
Prem

BPM in SAP NetWeaver: do you really like and use it?

Similar Messages

Maybe you are looking for