BPM is in Process (Not completed after 3 days also)
Dear All,
I have an existing scenario, which was working fine.
The scenario is File to IDoc, wherein picking up a file and splitting into multiple IDocs. The BPM is working out; able to send IDocs but not all the ones.
The bpm is still in process it has to send some more IDocs. When I see the work flow log: It says u201CWaiting for event 'RECEIVED' of object type 'ZXI_PROXY_MI_*_0002' u201C. When I open up the wait stepXML MessagesInstance ID u201CIt shows the status: Transfer to Processu201D
Over all, it has to send some more IDocs and complete the process.
I have checked the queues in XI and R/3 also. No entries found.
Does it happening because of huge data file?
What could be the problem? Any suggestions?
Thanks & Regards,
Venu V
Hi,
>>>The scenario is File to IDoc, wherein picking up a file and splitting into multiple IDocs.
there is just one answer to this question:
don't EVER use a BPM for splitting a file into multiple IDOCs...
this can be done without the use of a BPM by changing the occurance of the IDOC
then the flow will work
correct your flow and it will work perfectly
Regards,
Michal Krawczyk
Similar Messages
-
Why restore of my new mini ipad is not completed after 7 days?
Why my new mini ipad is still in a restore mode after 7 days? What should i do?
Hello Yves,
If the restore is taking a long time, then I would start the process over. Check out the article below for more information.
If you can't update or restore your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT1808
Regards,
-Norm G. -
App not install after 3 days HELP
I bought an app called Day One on the 15th of July, it still did not install after 3 days.
Everytime I try to install it, this message comes up 'Day One failed to download use the purchases page to try again.'
This is what shows up on the launchpad.Hey
Could you try updating to the latest version of iOS (8.3)?
Let us know if the problem persists.
Thanks -
TS3992 Icloud backup does not completed after install IOS 8
I recently installed iOS 8 on my iPhone 5s (32 GB). Prior to the install, I had just enough storage to backup on iCloud. However, after the install, it is saying "[a]n additional 3.1 GB of storage is required. This is puzzling because under Manage Storage it says that I have 4.3 GB worth of backups (3.6 for iPhone and 731 MB for iPad), which is within the 5 GB of free storage. In addition when I try to Backup my Iphone several times show me that the Backup is not completed and the last back up was before install IOS 8(17 Sept)
it is probably something to do with the iOS 8 update. This could be the case, although I downloaded and installed iOS 8 via Iphone wireless update, so nothing (I'm guessing?) should have been downloaded onto the phone.
Any help would be appreciated.I am having this problem too and I saw on another board that it is because it is keeping the copy from ios7 instead of replacing it w/the new one and that the solution is to delete the old backup. I have not verified that this is the correct answer yet as I do not know how to do that, but at least it may get you one step closer.
-
Checkpoint not complete after Oracle10g upgrade
OS: AIX 5.3
SAP: R/3 46C, 46D_EXT kernel
DB: 10.2.0.2
After upgrading Oracle from 9.2.0.8 to 10.2.0.2 in four SAP systems, Checkpoint not complete warning messages are detected when running CheckDB in DB13.
"BR0976W Database message alert - level: WARNING, line: 4577, time: 2008-06-23 00.25.21, message: Checkpoint not complete"
What I have done after reading OSS 1068186 & 79341 is - Set "_DISABLE_SELFTUNE_CHECKPOINTING" = TRUE ---> This seems to reduce the number of message but doesn't eliminate the issue.
The next step is probably to increase the size of the redo log files. Just wonder if anyone has any clue on this warning and how to resolve it?
Points will be given for helpful tips and information.
Thanks,
AnnieHi Michael,
I got this in our development system. I don't think it is I/O bottleneck problem. I will increase the DBWR to 2 and see how it goes.
Thanks for the helpful information. I will grant points after work done.
EVENT TOTAL_WAITS TIME_WAITED AVG_MS PERCENT
db file sequential read 1162987 244978 2.11 68
CPU 81609 23
log file sync 66074 21198 3.21 6
db file scattered read 5273 5846 11.09 2
log file switch (checkpoint in 49 2222 453.54 1
log file switch completion 75 1715 228.61 0
read by other session 925 794 8.59 0
latch: redo writing 25 715 286.14 0
latch free 65 517 79.52 0
SQL*Net more data to client 181633 514 .03 0 -
Processes Not Posting After Maintenance
Hi,
Periodically, processes will go to Not Posted status after we bounce the servers during our maintenance window. Usually, bouncing the process scheduler and clearing the cache does the trick. However, one in a blue moon, jobs simply will not post. We will spend hours bouncing servers, clearing caches, etc. and nothing works. Then a couple of hours later everything will start to post.
Any familiar experiences or thoughts on why this occurs?The maintenance varies from week to week; it's generally OS-level patching that doesn't require a reboot. I've got an experienced Tech Arch team taking the servers up and down, so I'm confident that the servers are being bounced correctly.
In the past, when reports have not posted after maintenance we have shut down the process scheduler and cleared cache and reports started posting. More recently, we've bounced the servers for several hours only to have reports start posting on their own afterwards.
I pulled the stdout log and found the following:
Java exception thrown: java.net.ConnectException: Connection refused (errno:239)
HTTP Status Code is: 900 (63,72)
Error getting report repository location. (63,85)
SchedulerTransfer Servlet error. (63,74) -
My ipod after trying to erase it, will not load after 3 days on the same screen
I was trying to erase all my data off my iPod 5th Gen, after I start the process it all starts well until the very last step (I think) will just not complete the job it's just stuck on the same screen it has been for the last 3 days ind the only thing i can do is hold the power and home button until it either reboots or it turns off when i stop the reboot short. The screen looks like when you updating an apple product and all there is, is the apple symbol and the loading bar. But the loading bar isn't filled at all. What should I do???
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Retired applications are not deleted after 60 days
We have several applications that are retired, all deployments are removed. According to SCCM documentation retired applications should get deleted after 60 days automaticly. It has been about 1 year since that the application is retired, but it does not
get deleted.
Any idea's?
Steven MuddeApplication is retired, deployments removed, no references. Manual deletion of the applications is not the problem, this works as it should.
However SCCM documentation says "If an application that has no deployments is retired, it will be deleted from the Configuration Manager console after 60 days."
http://technet.microsoft.com/en-us/library/gg682031.aspx
This does not work
Steven Mudde -
HT1933 New Yorker new sub will not download after 2 days 4G and Wireless
I have never had a problem getting anything to download, but yesterday I downloaded NewYorker app then one month sub and the sub downloaded the cover and table of contents and each page like Talk of the Town has a title but says waiting to download. I use 4g but took to coffee shop to download and use their wireless but did not work.
I have not received a purchase email yet, it is listed as purchased on my Apple Account though. The charge has not come in on my online credit card statement.
I have deleted app now, I don't want to fool with New Yorker if they don't have their act together.
I subscribe through Apple to NYTimes and Economist. Not a problem. I have about 10 other apps that all work just fine and all have downloaded and updated just fine.
Any suggestions.I hear that it will stop restoring after 3 days, so if you can wait another day, to make total of three you should be OK and will not need to force anything.
-
I have responded to a request to install upgrade 9.5.3 to Acrobat Pro. After three days I still see "Removing applications." How can I stop this?
Thanksif windows, use task manager (ctrl-alt-del)
-
Hi
I just buy new computer and would like to download Acrobat Adobe Pro XI on my new computer. The staff said I can downloaded it twice for 2 computers for 1 purchase. But now I can't load the program to my new computer. It's said it has been after 60 days and I can't download it.
What should I do?you can download the trial and activate with your serial number, https://www.acrobat.com/free-trial-download.html
-
Integration Process not continuing after Synchronous BAPI call
I have an integration process that splits up a batch file of purchase orders into single purchase order messages. This allows me to use the "ForEach" block to call the synchronous BAPI_PO_CREATE1.
I have managed to get the process to call the BAPI and create the purchase order. The response message arrives back though the abstract synchronous interface and is mapped to the asyncronous response message. After that the process seems to hold where I am expecting it to continue on the process and be appended to a container storage list for mapping to a single return message.
I have not set up any correlation sets as I thought they wouldn't be needed for a sychronous call.
Has anyone got any advice on my approach to this process and how I might fix it.
Thanks in advanceHi Bhavesh,
There are no errors as such in the SXMB_MONI but it gets as far as the Inbound Message (PE_ADAPTER) stage after the Sych BAPI call.
Also the SOAP Header at this stage seems to be missing "sysnchronous" or "asynchronous" in the SAP:ProcessingMode tags.
The technical workflow is as follows
FTP Batch file outbound to Integratin Process Receive (Async)
Transform message into a Multiline list of BAPI_PO_CREATE1.request (async abstract)
Enter "For Each" Block using the multiline list.
BAPI_PO_CREATE1 mapped to synchronous abstract interface
synchronous abstract interface mapped to BAPI_PO_CREATE.request and response
BAPI_PO_CREATE.response mapped to async BAPI_PO_CREATE.response
async BAPI_PO_CREATE.response appended to multiline list
Exit block
Transform multiline response list into single line response
FTP inbound
As far as I can make out I have not correctly configured the receiver of PO_CREATE1.response after it has been mapped from the sync to async so it just persists it and sits there waiting or it is waiting for somethign else to happen.
Let me know if I can clarify anything further.
Thanks
Ben -
Page item value set in app process not maintained after page submit
Hi -- I have a sequence of events that goes like this:
1) Page 0 region REG_1 is rendered before footer
- Region REG_1 uses javascript / AJAX to call App process PROC_1
- PROC_1 sets Page1 item PAGE1_MESSAGE to X
- After PROC_1 executes successfully, REG_1 does doSubmit()
2) Page 0 region REG_2 is rendered before footer; this happens
after the page submit done by REG_1. (Conditions ensure that
REG_1 is not rendered again)
- Region REG_2 displays PAGE1_MESSAGE (=X) in an alert.
- Region REG_2 uses javascript / AJAX to call App process PROC_2
- PROC_2 sets Page1 item PAGE1_MESSAGE to Y
- PROC_2 sets Application item DEBUG to PAGE1_MESSAGE (this is for debugging)
- PROC_2 sets Application item APP_MESSAGE to Y (this is also for debugging)
- After PROC_2 executes successfully, REG_2 does doSubmit()
3) After REG_2 submits the page, here's what I have:
- Application item APP_MESSAGE = Y. Good. This is what it was set to in PROC_2.
- Page 1 item PAGE1_MESSAGE = X. Bad. This is what it was set to in PROC_1.
- Application item DEBUG = Y. Good. This at least shows that PAGE1_MESSAGE was
set to Y within PROC_2... but for some reason that value is not being preserved
after the app process is done executing.
- There are several other application items set in PROC_2, and they're all correct.
Any ideas as to why this is happening? It seems like this should be
pretty straightforward: set the value, submit the page, the value should be what
I set it to.
Thanks,
CarolHi -- Thanks for the suggestions. First and 3rd (default value, or being overwritten by process or computation) aren't happening. The source for PAGE1_MESSAGE having is Always, Using app item PAGE1_MESSAGE... but I don't see what else could work here. Not sure if that's the problem.
I've put an example on apex.oracle.com. Workspace is dew_mir_tor. Username is [email protected]. Password is Mir97Dew77!Tor. Application is 22679, RefreshAllTest.
To reiterate the description in my original posting, but using the real application item/region/process names:
0) Press Button REFRESH_ALL on Page 1. This branches back to Page 1.
1) Page 0 region Refresh_All is rendered before footer
- Region sends up an alert to show you it's working
- Region Refresh_All uses javascript / AJAX to call App process REFRESH_CZAR (You'll see a "wait" window flash up briefly while the app process is running)
- REFRESH_CZAR sets Page1 item P1_MESSAGE_1 to X (The text here indicates where
the value is being set and when it should be displayed)
- After REFRESH_CZAR executes successfully, region Refresh_All does doSubmit()
2) Page 0 region Refresh_Non_Czar is rendered before footer; this happens
after the page submit done by Refresh_Czar. (Conditions ensure that
Refresh_Czar is not rendered again)
- Region sends up an alert to show you it's working
- Region Refresh_Non_Czar displays P1_MESSAGE_1 in an alert.
- Region Refresh_Non_Czar uses javascript / AJAX to call App process REFRESH_NON_CZAR (You'll see a "wait" window flash up briefly while the app process is running)
- REFRESH_NON_CZAR sets Page1 item P1_MESSAGE_1 to Y (The text here indicates where
the value is being set and when it should be displayed
- REFRESH_NON_CZAR sets Application item TEST_VALUE2 to P1_MESSAGE_1 (this just shows that P1_MESSAGE_1 was indeed set to Y in this process...)
- After process REFRESH_NON_CZAR executes successfully, region Refresh_Non_Czar does doSubmit()
3) After Refresh_Non_Czar submits the page, Page 0 region Display_Messages is rendered.
It sends up an alert so you can see it's working, and then it displays the value in P1_MESSAGE_1.
The value is still the one that was set in REFRESH_CZAR, not the one set in REFRESH_NON_CZAR.
Note that Display_Messages sets P1_MESSAGE_1 back to null, so you won't see it in session state after it's displayed in the alert. But you can see that TEST_VALUE2 is set to the message from REFRESH_NON_CZAR.
Hope this helps solve the problem!
Thanks,
Carol -
Rules within sequence are not completing after user logged out.
We have been noticing since yesterday that rules within a sequence not being completed when user logs off planning.
A. User kicks off a sequence from planning. This sequence has 4 rules.
B. Logged off either after launching or after waiting few minutes and logged off.
C. Next rules do not start and we noticed session is ending from AAS.
However user closes browser sequence completes. Yes sequence has no errors. It was working fine until last week and only change was 'NETDELAY' value. Changed from 1500 to 60000.
Not tried from SmartView yet.
Edited by: venuramini on Jun 22, 2009 5:40 PM
Corrected typo in title.Reason for changing from 1500 to 60000 was, do not remember exactly, issue with MS Excel connectivity. We implemented long ago in dev but never updated other environments.
As far as other HBR_MAX_WAIT_FOR_RULE and HBR_MONITOR_DELAY we have tried and did not achieve desired results.
FYI: we are using Planning 9.3.0.1 and wanted rules running longer than 60 minutes to go in background mode. But above setting would not be useful for 9.3.0.1.
Am I confusing you?
More info of original issue: Business rules time-out. Planning 9.3.0.1
Since then, we have increase web session time-out to 720 min (12 hours), in-activity session timeout to 720 min to let sequence complete even if user session timed out.
Thanks!
Venu -
Updates not completing after downloading
Hi All
After d/l software updates the computer starts to the reboot process but stops at the window saying " checking configuration". It then freezes at this point and will not respond (left over night thinking it was a slow process, but to no avail). I am pretty new to Macs so I need help please.
ThanksSee Mac OS X 10.5: Software Update stops responding during "Configuring installation"
Maybe you are looking for
-
My iMac crashed, how to backup my files from a dead drive
Hi, I need to backup my files, I haven't made any backup before, not even a time machine. I started up using the CD that came with it but DU isn't able to repair my disk. I know I made a mistake by not making any backup before but please help if you
-
HP LaserJet CP1518 only printing black and white!
Here is a weird issue. Today, my HP color LaserJet will only print Pages documents in B&W! The document in question printed in color yesterday. I tried a new document, and that one printed B&W! I 'printed' to a PDF and in Preview it was color, but pr
-
N95 8GB- my tv out wont work. audio will work but ...
Can any of you tech heads help me. i've placed films on my fone but with the the tv out only get audio. i've tried settinf pal to ntsc and vice versa. any ideas??
-
In a pages doc., I'd like to insert text to form a circle. Any ideas? thx.
-
Holiday Calendar for the incident of SCSM 2012 SP1
Hello , i have a problem : The resolution date of incident is not calculated just on the bussiness day !! i have tried to create a calendar to fix the business and the holiday days but i got the same problem !!!! prince