BPM Message being sent out

My Scenario 3files to BPM-XI- r3(one file)
when i run my scenarion I have a clock symbol saying " Message being sen6t out"  and it does not change even aftre some time. and i also dont see a message sent out from BPM to r3

There will be something called "PE" next to the symbol. Click on that. It w2ill take you to the BPM monitoring. then click on the symbol which looks like a table on the screen. This will show you where exactly your message is stuck. Then check the errror, fix it and your scenario should work fine.

Similar Messages

  • Bpm:message being sent and wait for event

    Hi,gurus:
    My scenario is about BPM.In the integration process I used a loop and correlation.The scenario worked successfully yesterday,but after I changed some thing,it did not work.The outbound status of the message in sxi_monitor said "message being sent".And when I clicked PE to see the workflow log, it said " wait for event".
    Thanks in advance.

    Could you tell me how to reimport the integration progress in ID?
    reimport means...delete the already imported BPM from ID.....this would affect the corresponding ID objects....save and activate....and then again run the import Integration Process wizard....create the objects once again.....seems time consuming.....hence mentioned it as the last option in the list:(
    Also from SWWL delete only the instance with status as ERROR.
    Edited by: abhishek salvi on May 20, 2009 9:30 AM

  • Message being sent and wait for event - BPM help.

    Hi Experts,
    I am doing BPM interface, in that i am receiving two files. Between these two files, i have set the coorelation in the BPM and included in the BPM's receive step1 and receive step2. After execution, when i look into the sxmb_moni, message status shows processed successfully, but when i look the Process engine status, it shows Message Being Sent and when i look into the BPM monitoring it shows message wait for event in the coorelation object.
    I have gone through the following forum :
    Link:[https://forums.sdn.sap.com/click.jspa?searchID=27600139&messageID=7561954]
    but everything is green and messages are set to Message being sent status.
    Experts kindly advise me.
    Regards
    Mani.

    Hi Abhishek,
    Here i have given my BPM design,
    Start
    Fork - two branches
    Branch1 - Receive File1
    Branch2 - Receive File2
    Transformation
    Send
    End.
    In coorelatin editor, i have specified container,involved messages and properties clearly.
    I have gone through the SAP basis contents as per your previous reply.
    One thing is, i have used the same design for my other interface, it is going through, but specifically for this interface i am getting error. If you could send me your mail, i will send you the exact screen shots, so that you can advise me.
    Pls i need to complete this in a short period, kindly help me to come out.
    Regards
    Mani..
    Edited by: mani_sg on Jun 18, 2009 10:21 AM

  • BPM wait step : RWB"To Be Delivered status": SXMB_MONI"Message being sent"

    Hi All,
    I have a BPM interface running fine since 1 year.
    In this BPM I have wait step for 5 minutes.
    But yesterday message  is stopped on wait and not proceeding ahead.
    I checked XML is good as per mapping. and in runtime wirk bench message is still in "To Be Delivered status"
    and in SXMB_MONI message column Outbound Status still showing "Message being sent" even after 12 hours.(wait is only 5 minutes). And below is the trace of last message.
    Please guide how to handle or restart this message. in SMQ1 & SMQ2 there are no queues showing:
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Inbound Message
      -->
    - <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
      <Trace level="1" type="T">--start determination of sender interface action</Trace>
      <Trace level="1" type="T">select interface Request_SI</Trace>
      <Trace level="1" type="T">select interface namespace https://www.XXXXX.com/YYYY</Trace>
      <Trace level="1" type="T">--start determination of receiver interface action</Trace>
      <Trace level="1" type="T">Loop 0000000001</Trace>
      <Trace level="1" type="T">select interface Request_SI</Trace>
      <Trace level="1" type="T">select interface namespace https://www.XXXXX.com/YYYY</Trace>
      <Trace level="1" type="T">--start determination of sender interface action</Trace>
      <Trace level="1" type="T">Hence set action to DEL</Trace>
      </SAP:Trace>
    Regards

    Solved, few BASIS jobs were inactive in transaction code "SWF_XI_CUSTOMIZING".

  • How can I attach several images to my Outlook Mac 2011 email message and have all of the images reduced in size while they are being sent out. Thank you

    How can I attach several images to my Outlook Mac 2011 email message and have all of the images reduced in size while they are being sent out. Thank you

    https://discussions.apple.com/message/11994130#11994130

  • Are my group messages being sent as MMS instead of SMS?

    Hi there! I just have a quick question about text messaging on my iPhone. I read here (http://support.apple.com/kb/HT5760) that "some carries automatically convert group messages into MMS" and that "group messaging is sent either as an SMS or MMS"
    See, I am a new postpaid subscriber. And my plan only includes unlimited text messaging (SMS) and data use. I usually send out group messages to 50+ of my colleagues when I need to remind them about something or ask a question. Are these messages being sent as an MMS, or as regular text messages? I fear I may be getting charged hefty sums for texting.
    Thanks!

    Why don't you check with your carrier. They would be in a position to better answer that question than a group of users from all over the world.

  • TS4002 emails are being sent out without my knowledge

    emails are being sent out without my knowledge, do I have a virus?

    Are you getting bounced spam messages? This simply means that someone is forging your address as the 'From' address, which is very easy to do. It's very annoying but it doesn't mean you've been hacked; unfortunately you can't really do anything about it but it usually stops after a bit as they move on to some other victim. As long as you don't have messages you didn't send in your 'sent' folder this is the most likely explanation, though changing your password might be a good idea on general principles (and make it a stong one).

  • Message being sent

    Messages of one integration process in sxmb_moni, outbound status is "Message being sent".
    Messages of other process is OK.
    Thanks.

    my design is like this:
    IDoc -> TXTIntegration process--->FTP
    Integration process is like this:
    loop{receiver>container operation(append)}>transformation---send.
    I have worked out this integration process:
    IDoc>Integration process{append>transformation>IDoc list}>FTP.

  • I have the 4s and my texts are being sent out by my email...not my cell

    I have the 4s and my texts are being sent out by my email...not my cell

    Hi,
    1. Go into Settings
    2. Messages
    3. Send and Receive
    4. Start conversations from > Tap you phone number
    Cheers

  • Message being Sent in Outbound Staus ccBPM

    hello everybody,
    i'm working with PI 7.1.
    I designed a ccBPM that send data from DB to sap by RFC and update status in DB.
    Everything worked good but last week we made a change harware and migrated all interfaces.
    We have a problem with this interface because in cannot see update in DB (so the last step of ccBPM).
    I don't find any error in xml monitorning, adapter monitor, SMQ1 , SMQ2, sm58. Everything work fine.
    The one one strange thing that i can notify is that:
    in xml monitor we have a row where the OUTBOUND STATUS is not with succes flag but have the status MESSAGE BEING SENT (the clock logo).
    any suggestion?
    thanks in advance
    Alex

    Hello,
    You could check in trx SWF_XI_CUSTOMIZING if there are green ticks for the background jobs.
    Regards,
    Sarah

  • CcBPM: Message outbound status, Message being sent

    Hi
    I have a message with status flag message being sent at the outbound status PE since 30 days. Because of this message many messages got blocked with scheduled on outbound side status.
    I tried to delete work items related to the message in SWWL, but i am not able delete.
    Please suggest solution
    Regards
    Subba Rao

    Hi velidi subba rao,
    Please go to SMQ2 and right click on the entry and Select Save to LUW. It saves it to SMQ3. You will be able to reprocess it from there.
    Give it a try and let me know if it worked. Also just release the queues once you have saved the message that is stuck.
    Regards,
    Jannus Botha

  • Summary Alert Issues - Summary Alert Being Sent Out as Multiple Emails

    I'm sure many of you have seen the various posts online about Summary Alerts that are supposed to show changes over the last 24hrs in a single email being sent out as either multiple emails containing a random number of items per email, or individual emails
    for each item that was updated. The question I have is... Has this issue been resolved with SP2 or any of the Post-SP CUs?
    One of my users mentioned that the August 2014 CU was supposed to have a fix for this issue, but I am unable to find any documentation specifically mentioning alert handling or the Summary Alert issue mentioned above. 
    Current Environment is SP1 + Aug 2013 CU (We're a tad behind -- but I'm working on that)
    Any information would be helpful.
    Thank you!
    MH

    Hi,
    I suggest you to delete the existing Rule and setup a New Rule.
    I have tested this on my lab and it works fine.
    You might want to refer to the below article on Setting up Alert Notifications
    https://msdn.microsoft.com/en-us/library/azure/dn306638.aspx?f=255&MSPPError=-2147217396
    Hope this helps !
    Regards,
    Sowmya

  • Why are my messages being sent through email rather than iMessage?

    Why are my messages being sent as email rather than iMessage?

    Not being sent as email - shown as being sent from an email address because you have selected to start new iMessage conversations from your Apple ID email address on your iPhone.
    When registering an iPhone with iMessage, the phone number along with your Apple ID email address is registered with it.
    Go to Settings > Messages > Send & Receive > Start New Conversations From - select your iPhone's phone number.

  • Why are my text messages being sent through my Apple ID to only one person and through my phone number to all other contact when using iMessage?

    Why are my text messages being sent through my Apple ID to only one person and through my phone number to all other contact when using iMessage?

    Is this one person using an iphone or ipad for imessaging?

  • Invitations not being sent out on Calendar Server 6.3

    We would be grateful for any help on this. We can give further details if needed, please just let us know.
    Thanks very much.
    Issue:
    To our customers the calendars server appears to be fully operational and without error. However, when a customer creates a new event and invites other people to attend, no invites are sent out. The event creator, however, believes all is in order as no error messages appear and the list of invitees appears on the event. This was working recently. We have looked for things which have changed (e.g. disk space, size of files, corruption, recent patching, licenses expiring, etc) but have not yet found anything that has changed.
    Some details of our system:
    ./cal/sbin/csversion
    Oracle Communications Calendar Server 6.3-27.01 (built Feb 15 2011)
    SunOS xxxx 5.10 Generic_142909-17 sun4u sparc SUNW,Sun-Fire-V440
    In /var/opt/SUNWics5/logs/watcher.log , we get these notices and errors when we restart the service.
    [20/Feb/2012:12:35:56 +1300] (Notice) Received request to restart: store admin http
    [20/Feb/2012:12:35:56 +1300] (Notice) Connecting to watcher ...
    [20/Feb/2012:12:36:00 +1300] (Notice) 7698
    [20/Feb/2012:12:36:00 +1300] (Notice) Stopping http server 7704 ..... done
    [20/Feb/2012:12:36:02 +1300] (Notice) Stopping http server 7705 ... done
    [20/Feb/2012:12:36:02 +1300] (Notice) admin server is not running
    [20/Feb/2012:12:36:02 +1300] (Notice) Stopping store server 7700 ............................................................... timeout
    [20/Feb/2012:12:37:03 +1300] (Error) Cannot stop server store with SIGTERM, now retrying with SIGKILL
    [20/Feb/2012:12:37:03 +1300] (Notice) Stopping store server 7700 ..... done
    [20/Feb/2012:12:37:05 +1300] (Notice) Starting store server .... 7718
    [20/Feb/2012:12:37:05 +1300] (Notice) Checking store server status ..... ready
    [20/Feb/2012:12:37:07 +1300] (Notice) Starting admin server ....Watched 'csadmind' process 7725 exited abnormally
    7725
    [20/Feb/2012:12:37:08 +1300] (Notice) Starting http server ....[20/Feb/2012:12:37:08 +1300] (Notice) Received request to restart: store admin http
    [20/Feb/2012:12:37:08 +1300] (Notice) Connecting to watcher ...
    ... 7727
    [20/Feb/2012:12:37:13 +1300] (Notice) 7698
    [20/Feb/2012:12:37:13 +1300] (Error) store failed twice in 600 seconds, will not perform restart
    Watched 'csadmind' process 7844 exited abnormally
    What we've done:
    We have run db_verify and csdb -v check on the databases. ics50deletelog.db did have corruption, so we fixed that by using db_dump and db_load to export then import the databases.
    We also purged the ics50deletelog.db database using cspurge afterwards when the dump and load didn't seem to have had an effect.
    We tried putting the log level up in the /opt/SUNWics5/cal/config/ics.conf , but didn't get any more details when restarting the service (through /etc/init.d/sunwics5 restart)
    Before we did the db_dump, db_load and purge:
    Calendar database version: 4.0.0
    Sleepycat Software: Berkeley DB 4.2.52: (December 3, 2003)
    Total database size in bytes: 1465503744
    Total number of calendars: 14964
    Total number of events: 830842
    Total number of tasks: 17351
    Total number of alarms: 57181
    Total number of gse entries: 9
    Total number of master component entries: 24100
    Total number of deletelog entries: 1779967
    Total logfile size in bytes: 79262
    Session database version: 3.0.0 [BerkeleyDB]
    Total database size in bytes: 0
    Total logfile size in bytes: 0
    Counter database version: 1.0.0 [Memory Mapped Files]
    Total database size in bytes: 0
    After the db_dump, db_load and purge:
    Calendar database version: 4.0.0
    Sleepycat Software: Berkeley DB 4.2.52: (December 3, 2003)
    Total database size in bytes: 1201864704
    Total number of calendars: 14964
    Total number of events: 830845
    Total number of tasks: 17351
    Total number of alarms: 55116
    Total number of gse entries: 9
    Total number of master component entries: 24100
    Total number of deletelog entries: 1779967
    Total logfile size in bytes: 5251612
    Session database version: 3.0.0 [BerkeleyDB]
    Total database size in bytes: 0
    Total logfile size in bytes: 0
    Counter database version: 1.0.0 [Memory Mapped Files]
    Total database size in bytes: 0
    Thanks again.

    Sounds like we talking about 'Event Invitations Notifications'. These are the notifications that gets sent when some one invite you to an event. Whether you receive the notification or not depends on your preference that is stored in ldap. This can be set using the Convergence by navigating through Options-> Calendar -> Notifcations (Check "Notify me via email of new invitations or invitation changes"). The actual ldap attributes that gets stored in user's entry is below.
    icsExtendedUserPrefs: ceNotifyEnable=1
    icsExtendedUserPrefs: ceNotifyEmail=[email protected]
    In the following cases, the user (attendee) will not get notifications even if the above preference is set.
    a> Creating an event with attendees in the past. CS6, by default, suppresses notifications for past events. You can enable notifications for past events by setting the config "ine.pastnotification.enable" to "yes" in ics.conf
    b> If the client creating the event requests server not to send notifications. (smtpNotify wcap param for storeevents.wcap). Outlook Connector uses this wcap param, so you won't get server notifications for the events invited using Outlook Connector. Outlook Connector sends it's own notifications directly.
    I think, you are looking for these kind of notifications. The process responsible for sending these notifications is "csadmind" on the Frontend. So, you need to check admin.log on the Frontend to see if it is sending notifications or not.
    Edited by: dabrain on Feb 21, 2012 9:26 AM

Maybe you are looking for