BPM Monitor job in solution manager

Hi
I am trying to monitor job's with solution manager.
In the BPM (Trans' solution_manager) I config a business process and add a job to the monitor.
But there is no support massage create when the job fails.
I don't know what i did wrong.
Help
Best regards
Lior Grinberg

Hello,
The automatic creation of a notification has to be configured separately from alerting. See documentation: http://help.sap.com/saphelp_smehp1/helpdata/en/a6/a1b52fda154614ba38a17be5243b73/frameset.htm
Please also visit the Business Process Monitoring site in Service Marketplace: http://service.sap.com/bpm
I recommend to configure the Job Monitoring from within a Job Documentation. The process is described in :
a) End user documentation
http://help.sap.com/saphelp_smehp1/helpdata/en/8e/3ad6f807e147669036d2a6aed597aa/frameset.htm
b) Tutorial on Service Marketplace
http://service.sap.com/~sapidb/011000358700001911422008E.sim
Best regards,
Martin

Similar Messages

HOw to schedule ''landscape fetch' job in Solution Manager???

HI,
Can any one please help me in scheduling LAndscape fetch job in solution Manager?
rEgards,
fAisal

Hi Venkatesh,
Thanks for your reply.
I checked by executing SLDCHECK. It opened the SLD page successfully. However, before that in the ABAP screen, it gave me error saying that:
=> Verify in the browser GUI that the SLD is in a healthy running state!
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call returned exception code 3
=> Check whether the SLD is running!
Summary: Connection to SLD does not work
=> Check SLD function and configurations
Now checking access to the XI Profile
Properties of RFC destination LCRSAPRFC
The RFC LCRSAPRFC was of type 3 ABAP. It asked me to change it to T (TCP/IP). I did so.
However, now I get this below error:
Properties of RFC destination LCRSAPRFC
RFC host:
program id:
gateway host:
gateway service:
Testing the RFC connection to the SLD java client...
RFC ping returned exception with message:
timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456#Timeout dur
I even tested this RFC in SM59. It gave the same error.
CAn you please help me?
REgards,
Faisal

Regading PI monitoring setup in solution manager

Hi Folks,
I am new to solution manager and I need to setup PI monitoring setup in solution manager...
I read some blogs and docs but not getting clear idea. all the remaning setup has been done in solution manager and only need to configure the technical monitoring thing in solution manager...
Please help me on this step by step guide...
Thanks,
Sreenivas

Hi Hareesh,
Thanks for your reply.
In Solution manager if I opend the technical monitoring I am getting below screen..
Can you please tell me what are the steps I need to do... For first i want to test this with one file communication channel later I will do remaining channels.
I am new to this setup.. help me on this..
Thanks,
Sreenivas

Solution Monitoring configuration with solution manager 4.0

Hi Friends,
I have to the Solution Monitoring configuration with solution manager 4.0.
Please provide steps or screen shot if any body having that.

Hi,
Check <a href="https://websmp108.sap-ag.de/sapidb/011000358700005479192006E.sim">this.</a> and <a href="https://websmp108.sap-ag.de/sapidb/011000358700006936062005E.sim">this</a>.
This will solve your problem.
Feel free to revert back.
--Ragu
Message was edited by:
Raguraman C

Regarding Monitoring Service for Solution manager

We need to configure "Monitoring" services in SAP solution manager 7.0.
Could somebody suggest us what are the main tasks we need to consider for doing Monitoring settings.
How many Minimum servers required to configure Monitoring services in solution manager system.
Also if any good document reference for this?
Thanks

Hi Jai,
welcome to sdn.
COMPONENTS & TOOLS OF SAP NETWEAVER
SAP Solution Manager
The SAP Solution Manager application management solution facilitates technical support for distributed systems u2013 with functionality that covers all key aspects of solution deployment, operation, and continuous improvement. A centralized, robust application management and administration solution, SAP Solution Manager combines tools, content, and direct access to SAP to increase the reliability of solutions and lower total cost of ownership.
With SAP Solution Manager, you can be sure your entire SAP solution environment is performing at its maximum potential. The toolset addresses your entire IT environment, supporting SAP and non-SAP software and covering current and forthcoming SAP solutions. And, as a customer of SAP, you have full access to the core SAP Solution Manager for no extra charge.
SAP Solution Manager targets both technical and business aspects of your solutions, focusing strongly on core business processes. It supports the connection between business processes and the underlying IT infrastructure. As a result, it eases communication between your IT department and your lines of business. And it ensures that you derive the maximum benefits from your IT investments.
SAP Solution Manager features and functions include:
SAP Business Suite implementation and upgrades u2013 SAP Solution Manager provides content that accelerates implementation. Configuration information and a process-driven approach to implementation speed the blueprint, configuration, and final preparation phases. SAP Solution Manager enables efficient project administration and centralized control of cross-component implementations.
Change control management u2013 SAP Solution Manager controls all software and configuration changes of the IT solution. This includes the approval process for change requests, the deployment of changes, and later analysis of changes. This ensures quality of the solution and enables traceability of all changes.
Testing u2013 SAP Solution Manager speeds test preparation and execution. It provides a single point of access to the complete system landscape and enables centralized storage of testing material and test results to support cross-component tests.
IT and application support u2013 The service desk included in SAP Solution Manager helps you manage incidents more efficiently and eases the settlement of support costs. Centralized handling of support messages makes the support organization more efficient.
Root cause analysis u2013 The diagnostics functions in SAP Solution Manager allow identification, analysis, and resolution of problems, even in heterogeneous environments. This helps to isolate general performance bottlenecks, to isolate exceptional situations, to record the activity of single users or processes, and to identify changes to the productive landscape. As a result, problem resolution is accelerated and business availability increased.
Solution monitoring u2013 SAP Solution Manager performs centralized, real-time monitoring of systems, business processes, and interfaces, which reduces administration effort. It can even monitor intersystem dependencies. Proactive monitoring helps you avoid critical situations, while automatic notifications enable fast response to issues.
Service-level management and reporting u2013 SAP Solution Manager allows easy definition of service levels and provides automated reporting. Service reporting covers all systems in the solution landscape and provides a consolidated report containing the information you need to make strategic IT decisions.
Service processing u2013 SAP Solution Manager makes appropriate service recommendations and delivers SAP support services. These include SAP Safeguarding, which helps you manage technical risk; SAP Solution Management Optimization, which helps you get the most from your SAP solutions; and SAP Empowering, which helps you manage your solutions.
Administration u2013 Administration tasks are mainly executed locally on the involved systems, but can be accessed and triggered from a central administration console. The administration work center in SAP Solution Manager offers a central entry point and unified access to all SAP technology.
SAP Solution Manager as the name suggests is for managing the whole gamut of SAP and Non-SAP solutions in the IT Landscape of an organisation. It provides you the tool, content and gateway to create, operate, manage and monitor your solutions over time.
It provides a range of scenarios to support this. Extending from project management to Solution Monitoring to Service Desk to E-learning Management, it provides an efficient way to carry out a plethora of business tasks.
SAP Solution Manager is the successor to ASAP ValueSAP. SAP Solution Manager helps in implementing and managing complex system landscapes. Globally systems are getting distributed across geographies and business processes cover more than one system. In such complex scenarios, integrating technical and business requirements is important for the success of IT. SAP Solution Manager provides SAP customers with an efficient means of handling both the technical and business process side of solution implementation .
As part of SAP Solution Management Solutions, the customers receive best practices relating to:
- Global Strategy and Service Level Management
- Business Process Management
- Management of MySAP Technology
- Software Change Management
- Support Desk Management
SAP delivers this using support programs during implementation of the system solution. Some of the benefits of using SAP's Solution Manager are that it helps:
- Manages the technical risk associated with the implementation of the solution ensuring technical robustness
- Helps leverage users core competencies in implementing solutions
- Ensures solution works as intended with best practices built in.
see these links...
http://www.ne-sap-solution-manager.com/
http://www.saptechies.com/category/sap-solution-manager/
thanks
karthik
reward me if usefull

SMD-Monitoring on SAP Solution Manager Server host

Hi!
Do I need also to install a SMD agent 7.00 on SAP Solution Manager server,
if I would like to set up SMD monitoring for SAP Solution Manager server itself?
Thank you!
regards
Thom

NO, you dont need to deploy SMD agent. SMD Server Package on Solution Manager, SMD Agent on monitored system.
Do you really want to monitor the Solution Manager system(JAVA)? If so yes, install SMD on Solution Manager, if you dont, then just deploy LMSERVICE on Solution Manager(use Solution Manager as the SMD server).
Hope that makes sense or answers what you want. I dont know if you want to monitor Solution Manager, more like want SM to do the monitoring of your satellite systems.
Derek
Edited by: Derek Galt on Jan 10, 2008 11:49 AM

How to monitor system from SOLUTION MANAGER?

Hi,
How do I monitor systems and send alerts from solution manager?
Thanks,

Hi Afi C
There are two types of monitoring in Solution Manager.
1. System Monitoring.
2. Business Process Monitoring.
1st one monitor system performance and 2nd one monitor specific jobs or transactions related to important business step based on the configuration.
If you have access to the service market place, you can some information related to above topics.
1. Quick link monitoring. www.service.sap.com/monitoring
   ==>Media library
2. Quick link BPM. www.service.sap.com/bpm
    ==>Media library (Under the technical information, Setup guide business process
          monitoring is goods one !). Same as business process monitoring, you can
          setup system monitoring from t-cd DSWP.
Best Regards
Keiji

Multiple Duplicate Jobs in Solution Manager.

Greetings,
We see duplicates of Job CCMS_CPH_AGGR_DATA_UPDATE and CCMS_CPH_RAW_DATA_UPDATE in our Solution Manager.
I understand these jobs are used to transfer data from the CCMS monitoring infrastructure to the associated BI of the SAP Solution Manager. The data is written directly to a number DSOs. Job CCMS_CPH_AGGR_DATA_UPDATE should be scheduled once every day and Job CCMS_CPH_RAW_DATA_UPDATE should be executed every hour.
However, we see huge number or duplicate jobs. I wanted to know if it’s alright to delete the duplicates?
Thank you,
Haseeb Ahmed.

Hi Roland, Thanks for your reply. These jobs are completing successfully and No errors have been recorded. In our Solution Manager System, we see Job CCMS_CPH_RAW_DATA_UPDATE and CCMS_CPH_AGGR_DATA_UPDATE has been created multiple times by user SM_EXTERN_WS. There are like hundreds of same jobs created. Since these are weekly and daily jobs, it does not make sense to keep them all. I wanted to know if its okay to clean-up the duplicates or not? I don't understand why duplicate jobs were created and is there a specific case when once of them will be active? Thanks, Haseeb Ahmed.

System Monitoring Setup in Solution Manager

Hello Experts,
We are going to implement and configure Solution Manager - System monitoring setup for pre testing purpose
Currenly we have installed below SAP Systems
1.Solution Manager Server
2.ECC server (Without Ides) - Abap
3.CRM Server (Without Ides) -Abap + Java
We need to setup below tasks in Solution Manager
1.Early watch alert
2.System Monitoring
3.Central System Administration
4.Business Process Monitoring
5.Service Level reporting
1.Is it possible to setup the solution manager -above mentioned tasks without Ides system ?
Could you please someone give input reg this.
Thanks
Thirumal
Edited by: Thiru Thirumal on Aug 6, 2008 4:56 AM
Edited by: Thiru Thirumal on Aug 6, 2008 4:57 AM

Hi,
Q. Is it possible to setup the solution manager -above mentioned tasks without Ides system ?
A. Yes.
Check with links for
1.Early watch alert
This process helps you to identify potential problems early, avoid bottlenecks, and monitor the performance of your ABAP and JAVA systems and your most important business processes, regularly, automatically and effectively. The data collection infrastructure comprises the ABAP Service Data Control Center and the JAVA function module Data Provider. The SAP EarlyWatch Alert in the SAP Solution Manager is a service provided by SAP.
To be able to use it, you have:
maintained the non-ABAP systems correctly in the system landscape maintenance (transaction SMSY)
RFC u2013 Connections between: and an RFC u2013 Connections established.
your satellite systems and the SAP Solution Manager system
SAP Solution Manager and the SAP Service Marketplace
Solution Manager system and Solution Manager Diagnostics
Cf: Solution Manager IMG (transaction SPRO).
checked the availability of the tools required for the SAP Service sessions (add-on ST-A/PI), with the report RTCCTOOL.
activated Alert Monitoring and set-up the Automatic Session Manager (ASM) in the Service Data Control Center (SDCCN) of your satellite systems, for all SAP satellite systems and the central SAP Solution Manager of your solution
set-up your systems in a solution landscape in the SAP Solution Manager
configured Solution Manager Diagnostics
2.System Monitoring
The system monitoring in the SAP Solution Manager is, as described above, like a system-wide central CCMS. It can also contain the central CCMS (CEN) of satellite systems. These CENs can then monitor other components.
The graphical display in the SAP Solution Manager gives you access to the alerts of all systems in a solution. You can go to the local or central CCMS of the satellite systems.
The system proposes the most important alerts in the CCMS monitor collection, according to SAP experience, and their alert thresholds, for each system in the solution, in the system monitoring Session. You can activate or deactivate these alerts. The connection between the local CCMS and the SAP Solution Manager allows you to maintain the alert thresholds directly in the SAP Solution Manager, overwriting the values in the local CCMS.
3.Central System Administration
You activate the customizing for business processes in your solution, in the Business Process MONITORING session in the SAP Solution Manager. A monitoring tree element (MTE), or a monitor collection, u201EBPMu201C of several monitoring objects, is created in the local or central (CEN) CCMS of the satellite system.
The data is collected for the monitoring types of the business process monitoring in contrast to system monitoring, as follows:
● The system collects performance (dialog transactions), posting cancellations (V1 and V2) and u201EOther CCMSu201C and interface data, in the local CCMS of the satellite systems.
● The system collects background processing, application list, application monitors, delivery lists, and document size data, in the central SAP Solution Manager CCMS.
The SAP Solution Manager system copies the data from the local CCMS.
The graphical display in the SAP Solution Manager simplifies access to the alerts for the business processes, business process steps or the interfaces between the systems in a solution. You can go to the local CCMS of the satellite systems.
The connection between the local CCMS and the SAP Solution Manager allows you to maintain the alert thresholds directly in the SAP Solution Manager. These overwrite the values in the local CCMS.
4.Business Process Monitoring
The system and business process monitoring (including interface monitoring) in the SAP Solution Manager, both use the Computing Center Management System (CCMS) (transaction RZ20) architecture. This means that system alerts which occur in the local CCMS, are passed to the SAP Solution Manager via RFC connections between the SAP Solution Manager and the satellites. The system shows these alerts in a graphic or in Sessions. You can also handle the alerts centrally, without having to go to the local CCMS of the satellite systems.
You can see the alerts from several systems in a solution landscape in the SAP Solution Manager, in a graphical overview, in contrast to the local CCMS of the SAP Solution Manager satellite systems. This is the view of a central CCMS (CEN). You can also monitor non-SAP systems in a central CCMS (CEN) of a satellite system
5.Service Level reporting
http://service.sap.com/solutionmanager for all solman tasks as given below.
http://www.asap.net.cn/homepage_en/Solution%20Manager%20EN.pdf
http://help.sap.com/saphelp_sm32/helpdata/en/1b/f02c41ab78f66fe10000000a1550b0/content.htm
http://help.sap.com/saphelp_sm32/helpdata/en/9f/1f46570f8a4a268b3154e0e0f07280/content.htm
Regards,
Srini Nookala

System Monitoring error in Solution Manager 4.0

Hi All,
I am configuring "System Monitoring" in Solution Manager 4.0.
I have successfully added satellite system through SMSY
as well as i have added system to the Logical Component, but when i open tcode solution_manager i am getting error Action Cancelled Internet Explorer was unable to link to the Web page you requested
ICM is running and I have also activated several services from SICF.
Please guide me in this scenario.
Points will be awarded
Thanks
Sachin

Hi,
Follow the below steps
1) Maintain the host file
Details of Solution manager in the following format
ipaddress host name fully qualified name
2) Internet explorer
Tools--> Internet options --> Connections --> Advanced settings
Maintain the bypass proxy there.
Since you are using GUI 710 your IE should be compatable. use IE 7.
If this answers your query, change the status of thread as Answered
regards
Naveen

Communication Channel Monitoring using CCMS/Solution manager

Hi ,
I have configured everything in solution manager for message monitoirng of PI system, but my requirement is to monitor communication channel error in ccms.
Is there any possibilty to trigger alerts for communication channel errors ??
Regards
Veeramalla

Hi,
Please refer following threads
SAP Solution Manager and PI
In addition you can refer solution manager wiki:
http://wiki.sdn.sap.com/wiki/display/SM/WeblogsrelatedtoSolutionManager
Regards,
Deepak
Edited by: Deepak Shah on Feb 23, 2011 11:15 AM

Integration of new BPM (NWDS EHP1) and Solution Manager process graphics

Hi Experts,
we are trying to use Solution Manager for our client's process documentation. Now, Solution Manager generates a graphic which unfortunately is almost unusable (no lanes, no transaction link, just visio-like graphic). Even the old ASAP 4.6C graphic tool was better and more interactive.
On the other hand the new BPM in NW Developer Studio EHP1 Composition Environment seems to provide a perfect graphical tool for process modeling and documentation.
Does anybody know if there is a (future?) possibility to integrate these two tools?
As an alternative, does anybody have an idea how to get better Solution Manager process graphics?
Michael Meissner

I also digged a little into this topic since I was wondering about the different modeling techniques SAP currently provides and how they will be integrated in the future.
[This|http://www.feedingthesapecosystem.com/2009/05/sapphire-09-part-ii-high-stakes-of.html] great blog entry about NW BPM also includes some comments about the future vision of integration between NW BPM and SolMan. It looks like in NW BPM 7.2 (planned for end of the year) there will be a "read-only" integration with SolMan processes while in the future there will be a bidirectional integration which means that BPM can import SolMan processes, enhance them and again export the models to SolMan. This is a great step further to the Common Process Layer SAP is referring in the [BPM Roadmap document|https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/003cf0a1-e8fa-2a10-7db5-ba245a663d9f&overridelayout=true].
Cheers,
Mane

System monitoring configuration in solution manager EHP1

Hi all
I am in a bit of fix
We have upgraded our solution manager devlopment to EHP1
Now I have added one system through SMSY in solution manager to configure system monitoring
I have generated all the RFC's,I have created the logical component and solution and assigned the system to the solution
When I check my solution it is looking fine
Now when I go within solution and click on the tab system monitoring
It shows me on the left hand side -> Set up system monitoring
when I click on Set up system monitoring on the left part of SAP screen,strangely it doesnt take me to the activation of screen monitoring,it just shows me the best practices documents on the right side but nothing more than that
I have checked many guides,blogs and SAP tutors anfd have followed them but strangely I am not been able to go to the screen for activating system monitoring
Are there any activities that need to be done after upgrading to EHP1?
Are there any services to be activated for system monitoring?
Please advice
Rohit

I'm not 100% sure that it is necessary, but it won't hurt.
Perhaps the essential adjustment you need for system monitoring is being done in there.
It won't hurt

Monitoring EWA in solution manager for EP

Hi
How to monitor and configure the EP 7.0 on solution manager 7.0 for SP 16
Can any body give the doc and steps to do.
Regards

Hi,
Follow Guides
Setting Up your Central Monitoring [original link is broken]
Notes
987835 - How to define Solutions in SMSY for Diagnostics
976054 - Availability of EWA for Non ABAP components
Prerequisites
The SAP EarlyWatch Alert is available for:
SAP systems based on ABAP stack of SAP Netweaver or SAP WebAS
SAP R/3 (minimum release 3.1H)
The Java stack of SAP Netweaver components with a J2EE Engine 6.40 or above (requires ST-SER 700 2007 1 or above on the Solution Manager)
The main prerequisites for using SAP EarlyWatch Alert are:
A remote connection between your SAP component and your SAP Solution Manager
On a ABAP stack system implement SAP Note 69455, run report RTCCTOOL and follow instructions.
For a Java stack system or a CRM system: setup of Solution Manager Diagnostics. For Java SAP Note 976054 describes the prerequisites.
The EarlyWatch Alert content is shipped on the Solution Manager with software component ST-SER u2018SAP Solution Manager Service Toolsu2019 and on the satelite systems (ABAP) with software components ST-PI u2018SAP Solution Tools Plug-Inu2019 and ST/A-PI u2018Application Servicetoolsu2019.
Chk Pdf
https://websmp201.sap-ag.de/~sapidb/011000358700002009362008E.pdf
/people/federico.babelis2/blog/2006/04/25/system-monitoring-configuration-guide-for-dummies
Hope it solves ur problem
Regards
Prakhar

A problem about system monitoring/administration of solution manager

Dear experts:
When I use solution manager system to monitor other systems, a strange phenomenon appears,that is I canu2019t open the detail log .anyone who can tell me why I can't open the alert? thanks

the problem has been solved,thanks

BPM Monitor job in solution manager

Similar Messages

Maybe you are looking for