BPM multi-mapping

Hi guys,
I'm doing a multi-mapping in a BPM (I need the BPM for other validations). This multi-mapping is 1x2 and the messages are created based on payload fields(both are optional 0..1). the mapping is working fine, the problem is at the fork step, I've two send steps and whenever the message1 or 2 doesn't have occurences, I got an error that stops my BPM. But this is not an error as the messages are optional and don't need to occurs everytime.
Anyone know how to solve this?
Thanks in advance & regards,
Ricardo.

Hi Patreek,
Necessary branches = 1.
I already did it. It works if only one message is generated (message1 or message2). If both messages are generated I get no error at the BPM, but only one message arrives ERP and when I check at BPE moni one of the send steps is logical finished.
Any idea? maybe I'm missing something...
Regards,
Ricardo.

Similar Messages

BPM Multi Mapping to diffrend receivers

Hello All,
i have to deploy an bpm process with 1:N mapping and different receivers
i have an receive step an transformation step for the mapping and
two send steps each in an block to send single messages to the receivers.
my problem is:
say the input Message has 4 Subtrees so after the Mapping i have 4 Messages for receiver1 and 4 Messages for receiver2
BMP send all 4 Messages to receiver1 and then all 4 messages to receiver2
but i want to send message1 tor receiver1 , then message 1 to receiver2
so that the pattern is like this:
MSG1Rec1, MSG1Rec2
MSG2Rec1, MSG2Rec2
MSG3Rec1, MSG3Rec2
is this possible with bpm.
Multi Mapping without bpm is not possible
regards ralf

Hi Marshal
receiver is abap proxy and not adapter engine
operation mapping is like this
source_operation1   => target_Operation1   0..unboundet
                                 => target_Operation2   0..unboundet
in message mapping
source_Message1    => target_Message1 0.. unbound
                                  => target_Message2 0..unbound
all work fine but in bpm i need two blocks pareach to send the messages to target.
and bpm will work first block1 and then block 2
i need a block for both sender steps but ???

MESSAGE_NOT_USED - ERR in BPM multi mapping process

Hi Guys,
Can any solve this issue please,
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">MESSAGE_NOT_USED</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Message interface is not used by this process</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have gone through all kind of prilimanary changes like
removed IP, reimported to ID
deleted IP and I did again from scrach (BPM)
no errors in BPM, activated, SXI_cache : Process return code shows 0, cache activated several times, server bounced.
Please your valuable inputs for this!!
Thanks
San

San,
A similar issue has been resolved here ... give it a try -
BPE_ADAPTER:MESSAGE_NOT_USED
When you double-click on Integration Process, you will get an option for Repeat Activation on the right-hand side header.
Hope this helps.
Regards,
Neetesh

Duplicate Message ID issue in case of Multi mapping (without BPM)

Hi Experts,
I am doing one sample Example for my requirement of converting the single source message data into the multiple Target messages.
for example, when sender system is sending the 5 sale order details into a single message in PI then my Inbound proxy class of ECC R/3 receiver system must get this sale orders separately, that means inbound proxy class method must be triggered separately for 5 sale orders from sender system. for achieving this, I have used the Multi mapping concept in ESR (without BPM).
This scenario is in Asynchronous mode.
The below screen shots give the details on what I have configures so far.
IN ESR
IN ID
IN SXMB_MONI of PI
IN SXMB_MONI of ECC R/3 Receiver system (Error in Processing)
due to this error, inbound Proxy class method is not being triggered for the single Sale order details as well,
please let me know how to tackle this duplicate message ID issue when we have multiple payloads to process in a single message.
please also let me know if is there any other workaround to fulfil this requirement.
Thank you,
Regards,
Jagesh

Hi Nunu,
Check the below blog for restrictions.
Multi-Mapping without BPM - Yes, it’s possible!
Restrictions
Messages that result from the split in a mapping-based message split are sent using one AE. So only adapters running on the AE are supported. In particular, this means that target IDOC message splits are not supported since the IDOC adapter is not part of the AE.
Regards,
Praveen.

Multi mapping with out BPM

HI ALL ,
I am trying to do multi mapping with out using BPM .I will get message from the sender and i need to send that to two different target system. I have defined the mapping in the IR . In ID i have created the configuration scenario and i have created the receiver determination .In receiver determination i have selected "EXTENDED" and when i select input help for mapping name it says "NO Object found". What else should i do get the mapping program here .
Regards,
Tarun.

Bhavesh,
I'm sorry but if he needs 2 different receivers, then it's not the case of using Enhanced Interface Determination.
sapuser,
if you scenario is asynchronous, then it's easily implemented.
But it won't be achieved with multimapping.
You'll have 2 receivers in receiver determination (normal RD, not enhanced). For each of those, you'll have to create a separate simple mapping (that will generate the message expected at each receiver system) and refer that mapping in the interface determination of each receiver.
For example, you have input_message containing data1 and data 2. You'll have 2 simple mappings (not a multimapping), 1 generating output_message_1 containing data1 and the other generating output_message_2 containing data2. Then refer those mappings in the proper interface determinations.
Regards,
Henrique.

Multi-Mapping without BPM

Hi ,
I am following this weblog
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
but stuck up with what are the fields contained by ID in target message2 ...
Please check this for your clarification
http://www.flickr.com/photos/11212307@N08/1135395357/
Thanks
dushanth

ID will have only ID under it. instead of creating flat structure like the one above Jin has changed the strucutre below . you will have only ID field in it or you want u can add other fields in it .
Regards
Sreeram.G.Reddy

Multi-Mapping and Message Split using BPM

Hi All,
Could anyone pls let me know clearly how message mapping can be done for this weblog
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
Thanks,
Ram

Hi,
When you are doing Message mapping after adding the Messaget types for source and target messages. You can click on the "" button in the target message and add one more tab. You can go to Message tab as shown in the 5th image and click "" button to add one more message type. Then do the mapping as usual.
<b>Based on the value of the element(name), the node of input(details)should be directed to one of the two message types</b>
Here in this blog it is done based on the Name.
You need to use IFTHENELSE boolean function and do the mapping.
Thanks,
Prakash

Error: 1:n multi-mapping using BPM for file to file scenario

Hi. Iu2019m trying to do 1:n multi-mapping using bpm scenario. I use file to file. Input file consists of many records and then I want many record to be transformed into many file at target system. I follow step in http://www.riyaz.net/blog/xipi-1n-multi-mapping-using-bpm/. However, I have a problem when file is retrieved in to XI. It doesnu2019t create any output file.
When I look at SXMB_MONI, it shows u201CNo object type found for the message Check that the corresponding process is activated.u201D Besides, it shows error message "Unable to perform action for selected message" when i clikc at PE in SXMB_MONI.
I have check at many previous posts with the same error message but still couldnu2019t solve it. I already activate my BPM and check that status in SXI_CACHE = 0. There is noting left in change list of my IR and ID.
Here is my design and configuration.
IR
Data Type: DT_file_split -> for both input and output file
Message Type: MT_file_split_sender, MT_file_split_receiver
Message Interface: SI_file_split_in, SI_file_split_out, SI_file_abs_source, SI_file_abs_target
Message mapping: MM_file_split for mapping MT_file_split_sender with MT_file_split_receiver
Interface mapping: OM_file_split
u2022     Source = SI_file_split_out
u2022     Target = SI_file_split_in
u2022     Mapping Program = MM_file_split
BPM following this link http://www.riyaz.net/blog/xipi-1n-multi-mapping-using-bpm/.
ID
Import my Integration process
2 Communication Channel for getting input file (CC_File_split_sender) and creating output file (CC_File_split)
2 Receiver determination:
u2022     Source system to BPM using interface SI_File_Abs_source
u2022     BPM to target system using interface SI_File_Abs_target
1 Interface determination:
u2022     from source system to BPM
u2022     Sender interface: SI_File_Split_Out
u2022     Receiver interface: SI_file_abs_source
1 Sender Agreement
u2022     Commu. Component: Source System
u2022     Using interface: SI_File_Abs_source
u2022     Sender Communication Channel: CC_File_Split_Sender
1 Receiver Agreement
u2022     Sender Communication Component: BPM
u2022     Receiver Communication Component: Target System
u2022     Receiver Interface: SI_File_Split_In
u2022     Receiver Communication Channel: CC_File_Split
Anyone know how to fix this?
Thanks,
Pavin

Hi,
Yes, thats the problem.
You are creating file from test tab of 1..N mapping .
In case of 1..N mappping in mapping Extra tags of messages are addded to the data.As shown here:-
Messages
      Message1
           MessageType
When you use this mapping to generate xml message then it will add additional tags for <Messages> and <Message1>, which is not correct. it should only have structure of you MT.
So remove start and end tag of <Messages> and <Message1> from your data file. Mentioned below in bold.
<xml......>
<Messages>
<Message1>
<MT_...>
</MT_...>
</Message1>
</Messages>
This should solve your problem.
Regards,
Sami.

Multi-Mapping in IDOC without using BPM ?

Hi ,
Please check ..
Can below given blog can be used to achive Multi-mapping in IDOC without using BPM ?
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Regards
PS

Solved .. Thx every one .
Approache Used :
1. Created mapping with Change signature on target Message type(idoc) with 1..N Occurence.
2. Operation mapping with change Occurence on Target Operation(1..Unbounded) .
3. Used same Operation mapping in Interface Determination with 0..unbounded(Multiplicity).

Error in Multi-mapping without BPM

Hi frnds,
I am doing a scenario File-XI-File. I am using the multi-splitting thing in the Message mapping. I have taken care of all the occurance's and "enhanced" thing in the IR and ID resp. I m using SP16. I want to avoid BPM.
But therez sme error cming up. When I check the MONI, its shwing "No messages created from split mapping" and when I test my interface using the Test Configuration in the ID, its shwing error in the Receiver Determination -- "HTTP connection to ABAP Runtime failed. Error: 403 Forbidden"
I have checked most of the blogs and forum suggestions. I have checked the ICF activations as well ...
So, do come back to me with your valuable suggestions, and I will award them points, if they really help me out.
Thanks and regards.
Neetesh

Hi Neetesh,
<i>
When I check the MONI, its shwing "No messages created from split mapping"</i>
For this, Can you check the source XML. Does it contain Tags like <messages> .. If yes, you need to remove them from your source XML.
If i am right, you have copied the XML from the TEST tab of the message mapping and pasted it in a notepad and saved it without making any changes at all..... Just do as i have mentioned above and i am sure you will no more get that error message in your MONI....
Also go through this weblog which talks about multi-mapping without BPM,
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Regards,
Abhy

Multi-mapping with message bundling but without using BPM

Hi all,
I have a requirement to bunch specific no. of records (say 50) from source message and create separate target messages for those bunches. For example, if the source message has 120 records, then there should be three separate target messages created containing 50, 50 and 20 records each.
I am wondering whether this multi-mapping is possible without using BPM, as the typical no. of records in the source message are in the range of 600 to 800, and rarely (twice or thrice a month) they shoot up to 2000. So my concern is whether BPM would affect the performance. We are using PI at SP12.
Regards,
- Shankar.

Sorry for late reply.. Well the sender is a file system, which sends a single XML file containing multiple records. (I mean I have a sender file adapter that polls periodically from a specific path and picks up the file when it is available)
The no. of records in the source file may be different in each run. The requirement on the receiver system is that it can handle a file which has maximum of 'n' records only (say 50 in my example)
Now the sender file can contain any no. of records. It may contain 10 on some day, or 200 the next day, or 120 on the third day. But on the receiver side, I want the files to be created such that each will contain AT MAX 50 records.
So, if source file has <=50 records, then there will be only 1 target file having the same no. of records.
If source file has between 51 to 100 records, then there will be two target files. One will have 50 records, and the second will have remaining records.
And so on..
Regards,
- Shankar.

Multi Mapping with out BPM and Receiver Determination Condition

Hi Masters,
My Requirement Was:
Proxy will send the data to XI system, Based Customer group number[1000,2000,3000,4000], I need to split the message into 4 messages, and sent to 4 Different location, based on Customer Group condition.
For message split, I fallowed below weblog.
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Problem is file split correctly, but data goes to all customer groups..
EX
If they send the customer group 1000, I need to send the customer group 1000 file to BS1[Business Server1],
If they send the customer group 2000, I need to send the customer group 2000 file to BS2[Business Server1],
Please guide me,
Thanks,
ANU-

Hi,
Develope it like follow.
Source Structure- Same for everything.
Create 4 different structures for all targets, create 4 different msg types, 4 inbound message interface ( i think you are creating single Message type now, that is the mistake)
In message maaping, add 4 target message types in same MM.. i hope i am clear.. ( same like in blog /people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible he has created 2 message types USER_1 and Employee)
keep occurence of all of them 0 to unbunded (not necessary)
Now create mapping for each message type (same like USER_1 and Employee, imagine them like different message types virtually).
Map message type with the source field and mention the condition which you want test using graphical functions. i will say if x e equla to 1 creatif --> target.
I hope i m clear till now...
thanks.

Multi mapping and message splitting in BPM

Hi ,
I am working with this scenario ...
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
how many message interfaces i have to create .
one outbound , one abstract and two inbound .. is it correct.

Hi
Minimum you need to create three message interfaces i.e. Bpm_In_MI_Abstract, aBpm_Out_MI_Abstract Bpm_Out1_MI_Abstract, because abstract interfaces can be use inbound and outbound as well.
You can also use create implement it by using inbound and outbound message interfaces. In that case you have to use three additional interfaces(1 outbound and 2 inbound).
Regards
Sami
Reward points if helpful.

Error in multi mapping bpm

Hi all,
In bpm, i have used a multi mapping transformation. And I get a error message that ' Cannot produce target element, check whether the source instance is valid' . And my two source messages are valid.
But in message mapping, i have given src1 and src2 as source messages in the same order.
But in the Messages_IN tab of bpm, the order of messages is reversed and it is src2 and src1. Can this be the reason for my mapping error? If so, how to rectify this.
If this is not the case, any more suggestions?

Hi Aarthi,
Check your occurence of Target strucuture migth be 1 to 1 or 1 to Unbounded.U r message mapping doesn't populates the data for u r target strucutre.Test u r mapping by giving the valid data( Which data is pass of mapping validations).
In your mapping go to messages tab and check the sequence of your message types are correct or not.If not choose Message types once in correct sequence.
Cheers
Veera
>>> Reward Points,If it is needful.

Multi-Mapping with BPM?

Hi Experts,
Can anyone send me a scenario which contains multi-mapping using BPM (collect pattern)........I searched on SDN but cudn't find any scenario which contains Multi-Mapping BPM scenarios. All the scenarios which r available based on without BPM.............points will given to the approriate replies.
Thanks in Advance
Faisal

Hey
strange you didn't find it,it was the second link when i searched SDN with the string "multimapping BPM"
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
Thanx
Aamir

BPM multi-mapping

Similar Messages

Maybe you are looking for