BPM not activated ,returns code 99

Hi all,
We are running XI 3.0 SR1,when I create a business process it gets activated,but when I test it, it shows "No object type found for this message"
when i check in sxi_cache it shows return code 99 and when i manually try to activate it,it shows xisuper is not registered developer and asks for access key.As far as i know XISUPER has all authorizations and should not ask for acces key.
Any pointers on how to solve this problem are welcome.
Regards,
Rashmi

Apply note 708338 or install a newer patch.
Regards
Stefan

Similar Messages

When I try to print from web page I get "printer not activated - error code 30", but I can copy text into Word document & printer works.

I am unable to print anything from an internet web page. I continually get "printer not activated, error code- 30" followed by "An unknown error occurred while printing". I can copy the material from the web page, place into a Word document and then print. This just started yesterday and I have no idea why. Would appreciate your advice!

See this:
[http://kb.mozillazine.org/Problems_printing_web_pages#Prints_to_a_small_portion_of_the_page]

When I try to print from web page I get "printer not activated - error code 30", printer works on Internet Explorer

When I try to print from web page I get a dialogue box "Printer not activated - error code 30" followed by a dialogue box "An unknown error occurred while printing". The printer works on websites when I use Internet Explorer. Also, if I copy the web page and paste it into a Word document, I can print a copy. This issue just started this week; I have not encountered this problem prior to this week. Please advise.

What does that error message say?
See this: http://kb.mozillazine.org/Problems_printing_web_pages

Activation error: Printer not activated, error code 20

I have had my officejet 4215 all-in-one printer well over a year and it has connected and printed whatever I wanted. Yesterday when I wanted to print an email it would not and the following box popped up: Activation error: Printer not activated, error code 20. Then the next box that popped up said: Printer Error An unknown error occurred while printing.
If I copy the email over to a Microsoft Windows page, then i can print it fine.
Any idea how to fix this so I can print email's like I used to?
Rey

What operating system? What email program are you trying to print from?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Internal error: Recipient address not found.return code : 80

Hi All,
I am getting this this error in sost tcode.I am facing this tcode for the first time and hence have no idea.could any one suggest why this is coming and could be the solution for this ?
Status trans.met sender recipient send date send time status text
Red mark via. inter. john - 27.08.08 15:45:00 internal error: Recipient address not found.return code : 80
Need solution urgently.

Not in SCOT, If you read carefully i said,
setup the Relay Agent in your SMTP server
For example if you use MS Exchange you need to do the config there... If you ask your Mail Admin he will know what you're talking about.
Regards
Juan

How to i repair a printer not activated, error code -30 message when trying to save a file to pdf

Please help

Hi,
Thank you for posting in Windows Server Forum.
Yeah, agree with Milos. Please provide more information for further troubleshooting.
From your initial subject it seems you are facing issue with printer activation on your server. The error may be caused if the wrong printer is set as the default printer, the printer driver is missing, or if there are conflicts in the device manager. Please
make sure below 3 steps whether it’s get some workaround.
Step one: Make sure the desired printer is set as the default printer
Step two: Re-install the USB Composite Device from Device Manager
Step three: Reinstall the Software for that particular printer
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Significance of IP Return Code in SXI_CACHE

Hi All
For us under 'SXI_CACHE' all the BPMs are having return code 99 and same kind of
error for all
'xxxx' is not a component of data object 'PAYLOAD'
90% of the BPMs are working fine.
But the rest are not getting instantiated and in SXMB_MONI we are getting the following
error
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">SYSTEM_FAILURE_INTERNAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>An internal error has occurred</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
We have got one SAP Note : 890760 for the error -" 'xxxx' is not a component of data object 'PAYLOAD' "
but confused whether to apply or not bcoz 90% of ccBPMs are working properly even with this error.
Is it mandatory that BPMs must have Return Code '0' in SXI_CACHE ??
If yes why some BPMs are still working properly with Return Code '99' ??
Any help will be appreciated.
Thanks in Advance
Chemmanz

Hi,
but confused whether to apply or not bcoz 90% of ccBPMs are working properly even with this error.
Do any of these BPMs check(using a switch for example) on an attribute value of a the incoming payload?
Basically BPMs in sxi_cache having a return code of 0, mean that, they donot have any errors(syntactic/semantic) as such.
This helps us as one of the debugging steps, in case of any error, while executing a scenario.
Am not sure if this would technically effect anything else.
Regards,
Smitha.

Process chain is not activating

Hi ,
I am trying to schedule process chain, but giving error message like below.
Job BI_PROCESS_TRIGGER Could not be activated (return code 8).
Can you please tell me what it means and how can i activate it.
Regards
Rajini

Follow the steps given in OSS NOTE 947690.
Summary
Symptom
The activation or scheduling of the chain fails with the return code 8. You get the message "The job xxxxxx could not be scheduled"(or activated).
Other terms
Return code 8,rsm702,rspc065.
Reason and Prerequisites
1. The user type of background user is incorrect.
2. Invalid host name setting.
3. Server name spelt wrong or wrong case-sensitivity for server name in sm51.
4. Process chain scheduled to run on a server which does not exist.
5. No instance is defined but the operation mode is set in sm63..
Solution
1. Set the background user profile according to note 511475.
2. Check the host name setting in sm65 and correct if necessary (refer note 23538).
3. Check the server settings in sm51 i.e., check for the spelling and correct case.
4. Schedule the chain with a valid server.
5. Maintain an instance of operation mode in rz04
You can try executing RSPC_EXECUTE_USER program. This switches between the scheduling by the current user and the scheduling by the BW background user (Note 640746)

Service 'sapdp00' unknown Return Code -91

Dear Expert:
After I finished SAProuter set up and tried to login with /H/218....../H/.
But prompt up an error.
Service 'sapdp00' unknown
Line 489
Method NiPGetServByName:service 'sapdp00' not found
Return Code -91
what's wrong???
and below is the SAProuter's dev_rout log file
NI-ROUTER LOOP ********
NiIRead: hdl 1 received data (rcd=66,pac=1,MESG_IO)
NiSelISelectInt: 1 handles selected (1 buffered)
DATA from C1/-1 (ms3.loyal.com.tw) received
NiRClientHandle: route received
executing NiRExRouteCon
NiRRouteRepl: copying input to route and replacing name
C1/-1 has NI-layer-version 39
NiBufIRouteToTable result from total 2 entries:
hostname /service
59.120.10.238 /
10.8.90.212 /sapdp00 < next
NiHsLGetServNo: found service name 'sapdp00' in cache
NiHsLGetServNo: retrying to get port number for 'sapdp00'
***LOG Q0I=> NiPGetServByName: service 'sapdp00' not found: getservbyname [ninti.c 489]
NiHsLGetServNo: service name 'sapdp00' not found by operating system
ERROR => NiRExRouteCon: NiBufIRouteGetNext failed (rc=-3) [nirout.cpp 2677]
ERROR => NiRClientHandle: NiRExRouteCon for C1/-1 'ms3.loyal.com.tw' failed (rc=-3) [nirout.cpp 2243]
NiBufISendErr: send ni-error rc -91 to hdl 1
NiIWrite: hdl 1 sent data (wrt=263,pac=1,MESG_IO)
NiRCloseConn: closing C1/-1
NiICloseHandle: shutdown and close hdl 1 / sock 800
NI-ROUTER LOOP ********
Tue Dec 01 17:52:10 2009
NiSelISelectInt: 0 handles selected (0 buffered)
NI-ROUTER LOOP ********
Please Help~
Thank you very much~
Regards
Jack Lee

Hi,
check your services file for service sapdp00 /32<sys nr>/tcp
looks like it's missing
Mark

Return code 99 in BPM

Hi,
I tried to activate manaully (SXI_CACHE) in BPM and also cleared full cache in RWB. But even thought the return code is 99 for my BPM processs. I am not using any sychronous communcation my versionis PI 7.0 with sp 9. Please let me know is there any other way of making return code as 0
regards,
Dhil

Hi Dhil,
Perform a complete cache refresh using the url
http://host:port/CPACache/refresh?mode=full
u hav to use PIDIRUSER for this. After cache refresh, activate ur Integration Process in the SXI_CACHE tcode.
Anil

Return code 99 for BPM

Hi All,
In sxi_cache for Integration Process the return code is 99.It should be 0.I have created BPM again but still that problem presists.when i post message it is not entering BPE engine.
Could you please help me on this?
Best Regards,
Harleen Kaur Chadha

hi,
Refer My article:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/80a22ce8-8e72-2b10-3fba-e9511c6f0b8b
Regards
Mamta

DDIC ACTIVATION ERRORS and RETURN CODE in SAPA700VT1.LBP During Prepare

Hi Gurus,
For The Error mesage During prepare
Restart logs of DB conversions found
n Outstanding DB conversions found
We refer the Upgrade Guide & followed the steps thro SE14 Choose >DB Requests> Terminated .
Nothing found.
Then we Edit the Table found in error log ( CONV ENTRY TBATG INDX/BIC/FZLDEL_C11 0600CREB 200710032STEAM) . & by mistekan used the option Extras > Force conversion.
Now table TABTG is missing in from DATA Base & we are facing the Error
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA700VT1.LBP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "12"
Again when we check SE14 Choose >DB Requests> Terminated it shows one Entry TBATG but is not exist now
Help me

Hi,
Did you checked SM13 or SMQ1? that´s the probable cause for that error, now you should open an OSS note or start all over again.

Cannot Active Job (Return Code 4)

Hi All,
I am trying to start a process chain to create a DSO. Anytime I try and start the process chain, I get the following error:
Cannot Active Job (Return Code 4)
Return Code 4 seems to be tied to JOB_CLOSED_FAILED but I am not sure how to resolve this. Does anyone know how to resolve this issue?
Thanks

Process chains are used to load data to DSO/Cube/info objects.
Can you check your process chain start variant job was in release state? or schedule state?
if its in schedule then make it release or start immediate.
Go to start variant of your chain-->double click on it-->select change selection-->start immediate and see.

DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCG730

Hi there,
We are doing an upgrade from 3.5 BI to 7.3, we ran into an error during the MAIN_SHDRUN/ACT_UPG phase. The Error (show below)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCG730.MIT
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1EEDO519 "Table" "/BIC/CZZI_DS_INT" could not be activated
1 ETP111 exit code
Does anyone came know how resolve this error ? Please advice
Many Thanks
Jacob

Hi Jacob,
In order to resolve this issue you have to unlock the shadow system and activate the table.
Procedure for unlocking shadow system
go to you bin directory (i.e) /usr/sap/SID/upg/abap/bin
./SAPup unlockshd SID
After unlocking login to shadow system client 000 and fix the above errros.
Remember to lock the shadow system before repeating the phase again.
Locking Shadow system : go to bin directoty and issue the command ./SAPup unlockshd SID
Regards,
Ershad Ahmed.

Printer not-accepting APP-FND-00500: AFPPRN received a return code of failu

Hi Gurus,
skgtag: not-accepting APP-FND-00500: AFPPRN received a return code of failure from routine FDUPRN. Program exited with status 1.
This is my error. My same request output is printing to other printers. But it is not printing in particular printer.
My printer is shared is windows 2000 system and we have installed Unix files & printer sharing windows feature.
while executing below command from soloris command line
lp -d skctag -n 1 sona
skgtag: timed out error is coming please give advice in this.

Hi Hussein,
Now concurrent is completed normally without any warnings.
Server OS Level
Now it is not showing any error but printout not coming in printer.
lp -d skctag -n 1 /rman_backup/PROD_rmanfullbkp.sh
request id is skctag-60 (1 file(s))
But printout not coming ....
Concurrent Log file for your reference.
Executing request completion options...
------------- 1) PRINT   -------------
Printing output file.
Request ID : 50089046
Number of copies : 1
Printer : skctag
Finished executing request completion options.
Concurrent request completed successfully
Current system time is 07-JAN-2013 11:14:08
---------------------------------------------------------------------------

BPM not activated ,returns code 99

Similar Messages

Maybe you are looking for