BPM - Parallel process

Hi All,
I have multipe messages in a multiline container in a BPM.
Now i want to send each message individually to a webservice and get the response.Want to acheive this requirment in parallel process so that the total time is less.
Please let me know how to implement this requirement in BPM.
Regards,
Srinivas.

Hi Adish,
>> I want to send message to syn webservice
From which system you are sending data and what manner(synchronous or asynchronous).
>>Where I dont know exactly what will be the value for n in transformations step. It can vary depend upon input message that BPM will receive.
For this you can use a container variable of type xsd:integer and store the value in it and later you can use it for the next steps.
but give a arrow diagram and brief your exact requirement.(e.g., File->XI->HTTP)
Thanks,
Gujjeit

Similar Messages

BPM Parallel Process with Exclusive Gateway

Hi,
I am facing issue with Exclusive Gateway in Parallel Process.
Issu is, process always in In-Progress state at parallel Join. I mean process stops at Parallel Join and more over there are no errors in the process. If I delete Exclusive Gateway in Parallel process, the process is going to next level human task through Parallel Join. It means working fine.
I have designed my process in such a way that, 1st task is Human Task ---> then Parallel Split with 2 Human tasks, out of one task performing throught Excusive Gateway and another one is just simple approval. Finally I am merging these two Human tasks using Parallel Join then finally triggerting Approval Human task, and closing the Process.
Appreciate your quick suggestions to fix this issue.
Thanks in advance,
Dev...

Hi Unni,
Thanks for your reply.
I have checked all the parallel tasks and all are in completed state. No errors.
If I delete Exclusive Gateway it is working fine. I have checked step by step tasks in NWA, and every thing goes well.
Please let me know If I missout anything.
Thanks in advance,
Dev

BPM - Independent Parallel Processing

Hi,
i need a suggestion.
Via JDBC Outbound Adapter a BPM receives a multiline element from a database periodicaly . For each row the BPM does a sync rfc call and following a sync JDBC update call back to the database.
Currently i have tried par foreach and foreach, but with a message size of more then 1000 rows the bpm needs over an hour to complete all steps.
What is the best solution for parallel processing the multiline message in the bpm ?
Thanks and Regards
Sebastian

Sebastian,
For-Each or Par-For-Each is the only way in your case. But what u can do is, reduce the number of rows. If you have the polling time as 5 mins, then reduce it to 2 mins. So the rows might get reduced.
your thoughts!
raj.

FORK is Not happening Parallel processing- It's working sequential

Hi,
   we are into PI 7.O and SP 13.
   I am trying to test Parallel processing using Fork step. (With Two branches)
My problem is sxm_moni both branches are not executed simultenously and it's executing one after the other.
Did any body done in XI parallel processing using BPM...both calls has to finish at the same time. I mean first call 10 min and second call aslo has to finish first 10 min ..not other 10 min.
I heard this problem from XI 3.0 and PI 7.O. But PI 7.1 did any body test the Parallel processing using Fork step.
   Pls help me is this issue will resolve if I go to PI 7.1.
Regards,
Venu.

Hi Henrique,
they would not necessarily start at the same time but shouldnt also be queued - Customer expecting the response within a 17 sec or 20 Sec but coming response 34 sec will not ok for the customer..tomorrow need add some more target again 17 sec will take...How PI can handle the Multi threading they are checking...I am not sure this problem fixed in PI 7.1 or not.
there're # of connection restrictions in your system? Check that - Where can I check connections restrictions...If you know pls through some light on this.
Also, how's your BPM transactional behavior (did you flag the create new transaction steps)?
- I did not checked the flag for create new transaction step..once my server is up I can check the flag and I can test.
Regards,
Venu.

Unable to clone File Adapter receiver channel for parallel processing

Hi Experts,
I am using variable substitution for File - RFC - File with out BPM scenario(using request response, oneway bean).
While i placed the file in the sender FTP folder, the file didnt get picked up, but in communication channel monitoring, i am getting error ' Unable to clone File Adapter receiver channel for parallel processing'.
Can anybody provide me suggestions to solve this error.
Note : without variable substitution , the interface is working good.
Is it due to, i am trying the source structure field in response file adapter?

Hi,
In your CC, do you use some additional paramaters ?
like these one of point 47/48 of [Oss note 821267 - FAQ: XI 3.0 / PI 7.0/ PI 7.1 File Adapter|https://service.sap.com/sap/support/notes/821267]
Maybe there is conflict with a parallel connexion and the bean used to do asynch-synch bridge...
Mickael

BPM parllel processing

HI,
i am using a BPM to process bulk messages at a time, but all the messages are send to one queue and messages are getting processed very slowly from the queue.
i have 2 questions here,
1)for what reason, Queue is processing messages very slowly?
2)is there any way that BPM keeps the messges in the different queues ???
Thank You,
Madhav

Hi Madhav,
Refer to the parallel processing section of this document:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0968c17-8cca-2b10-7594-c9105e304be0?quicklink=index&overridelayout=true
Thanks!

Parallel processing and throttle

Hi experts,
where this parallel processing and throttle used exactly in XI.

You can develop scenarios in BPM for parallel processing. Simple use cases involve like splitting incomming file into multiple files and sending them out in parallel. A block with par for each would be needed in this case.
Search in help for more information.
VJ

Parallel Processing : Unable to capture return results using RECIEVE

Hi,
I am using parallel processing in one of my program and it is working fine but I am not able to collect return results using RECIEVE statement.
I am using
CALL FUNCTION <FUNCTION MODULE NAME>
STARTING NEW TASK TASKNAME DESTINATION IN GROUP DEFAULT_GROUP
PERFORMING RETURN_INFO ON END OF TASK
and then in subroutine RETURN_INFO I am using RECEIVE statement.
My RFC is calling another BAPI and doing explicit commit as well.
Any pointer will be of great help.
Regards,
Deepak Bhalla
Message was edited by: Deepak Bhalla
I used the wait command after rfc call and it worked additionally I have used Message switch in Receive statement because RECIEVE statement was returing sy-subrc 2.

Not sure what's going on here. Possibly a corrupt drive? Or the target drive is full?
Try running the imagex command manually from a F8 cmd window (in WinPE)
"\\OCS-MDT\CCBShare$\Tools\X64\imagex.exe" /capture /compress maximum C: "\\OCS-MDT\CCBShare$\Captures\CCB01-8_15_14.wim" "CCB01CDrive" /flags ENTERPRISE
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

Parallel processing of mass data : sy-subrc value is not changed

Hi,
I have used the Parallel processing of mass data using the "Start New Task" . In my function module I am handling the exceptions and finally raise the application specific old exception to be handled in my main report program. Somehow the sy-subrc is not getting changed and always returns 0 even if the expection is raised.
Can anyone help me about the same.
Thanks & Regards,
Nitin

Hi Silky,
I've build a block of code to explain this.
DATA: ls_edgar TYPE zedgar,
        l_task(40).
DELETE FROM zedgar.
COMMIT WORK.
l_task = 'task1'.
ls_edgar-matnr = '123'.
ls_edgar-text = 'qwe'.
CALL FUNCTION 'Z_EDGAR_COMMIT_ROLLBACK' STARTING NEW TASK l_task PERFORMING f_go ON END OF TASK
    EXPORTING
      line = ls_edgar.
l_task = 'task2'.
ls_edgar-matnr = 'abc'.
ls_edgar-text = 'def'.
CALL FUNCTION 'Z_EDGAR_COMMIT_ROLLBACK' STARTING NEW TASK l_task PERFORMING f_go ON END OF TASK
    EXPORTING
      line = ls_edgar.
l_task = 'task3'.
ls_edgar-matnr = '456'.
ls_edgar-text = 'xyz'.
CALL FUNCTION 'Z_EDGAR_COMMIT_ROLLBACK' STARTING NEW TASK l_task PERFORMING f_go ON END OF TASK
    EXPORTING
      line = ls_edgar.
*&      Form f_go
FORM f_go USING p_c TYPE ctype.
RECEIVE RESULTS FROM FUNCTION 'Z_EDGAR_COMMIT_ROLLBACK' EXCEPTIONS err = 2.
IF sy-subrc = 2.
*this won't affect the LUW of the received function
    ROLLBACK WORK.
ELSE.
*this won't affect the LUW of the received function
    COMMIT WORK.
ENDIF.
ENDFORM.                    "f_go
and the function is:
FUNCTION z_edgar_commit_rollback.
*"*"Interface local:
*" IMPORTING
*"     VALUE(LINE) TYPE ZEDGAR
*" EXCEPTIONS
*"      ERR
MODIFY zedgar FROM line.
IF line-matnr CP 'a*'.
*comment raise or rollback/commit to test
*    RAISE err.
    ROLLBACK WORK.
ELSE.
    COMMIT WORK.
ENDIF.
ENDFUNCTION.
ok.
In your main program you have a Logical Unit of Work (LUW), witch consists of an application transaction and is associated with a database transaction. Once you start a new task, your creating an independent LUW, with it's own database transaction.
So if you do a commit or rollback in your function the effect is only on the records your processing in the function.
There is a way to capture the event when this LUW concludes in the main LUW. That is the PERFORMING whatever ON END OF TASK. In there you can get the result of the function but you cannot commit or rollback the LUW from the function since it already have implicitly happened at the conclusion of the funtion. You can test it by correctly comment the code I've supplied.
So, if you want to rollback the LUW of the function you better do it inside it.
I don't think it matches exactly your question, maybe it lead you on the right track. Give me more details if it doesn't.
Hope it helps,
Edgar

Parallel Processing and Capacity Utilization

Dear Guru's,
We have following requirement.
Workcenter A Capacity is 1000.   (Operations are similar)
Workcenter B Capacity is 1500.   (Operations are similar)
Workcenter C Capacity is 2000.   (Operations are similar)
1) For Product A: Production Order Qty is 4500. Can we use all workcenter as a parallel processing through Routing.
2) For Product B: Production Order Qty is 2500. Can we use only W/C A and B as a parallel processing through Routing.
If yes, plz explain how?
Regards,
Rashid Masood

May be you can create a virtual WC VWCA=ABC (connected with a hierarchy with transaction CR22) and another VWCB=A+B and route your products to each VWC

Parallel processing open items (FPO4P)

Hello,
I have a question about transaction FPO4p (parallel processing of open items).
When saving the parameters the following message always appears : "Report cannot be evaluated in parallel". The information details tells that when you use a specific parallel processing object, you also need to use that field to sort on.
I my case I use the object GPART for parallel processing (see tab technical settings). In the tab output control I selected a line layout which is sorted by business partner (GPART). Furthermore no selection options are used.
Does anyone know why the transaction cannot save the parameters and shows the error message specified above. I really don't know what goes wrong.
Thank you in advance.
Regards, Ramon.

Ramon
Apply note 1115456.
Maybe that note can help you
Regards
Arcturus

How to do parallel processing with dynamic internal table

Hi All,
I need to implement parallel processing that involves dynamically created internal tables. I tried doing so using RFC function modules (using starting new task and other such methods) but didn't get success this requires RFC enabled function modules and at the same time RFC enabled function modules do not allow generic data type (STANDARD TABLE) which is needed for passing dynamic internal tables. My exact requirement is as follows:
1. I've large chunk of data in two internal tables, one of them is formed dynamically and hence it's structure is not known at the time of coding.
2. This data has to be processed together to generate another internal table, whose structure is pre-defined. But this data processing is taking very long time as the number of records are close to a million.
3. I need to divide the dynamic internal table into (say) 1000 records each and pass to a function module and submit it to run in another task. Many such tasks will be executed in parallel.
4. The function module running in parallel can insert the processed data into a database table and the main program can access it from there.
Unfortunately, due to the limitation of not allowing generic data types in RFC, I'm unable to do this. Does anyone has any idea how to implement parallel processing using dynamic internal tables in these type of conditions.
Any help will be highly appreciated.
Thanks and regards,
Ashin

try the below code...
DATA: w_subrc TYPE sy-subrc.
DATA: w_infty(5) TYPE c.
data: w_string type string.
FIELD-SYMBOLS: <f1> TYPE table.
FIELD-SYMBOLS: <f1_wa> TYPE ANY.
DATA: ref_tab TYPE REF TO data.
CONCATENATE 'P' infty INTO w_infty.
CREATE DATA ref_tab TYPE STANDARD TABLE OF (w_infty).
ASSIGN ref_tab->* TO <f1>.
* Create dynamic work area
CREATE DATA ref_tab TYPE (w_infty).
ASSIGN ref_tab->* TO <f1_wa>.
IF begda IS INITIAL.
    begda = '18000101'.
ENDIF.
IF endda IS INITIAL.
    endda = '99991231'.
ENDIF.
CALL FUNCTION 'HR_READ_INFOTYPE'
    EXPORTING
      pernr           = pernr
      infty           = infty
      begda           = '18000101'
      endda           = '99991231'
    IMPORTING
      subrc           = w_subrc
    TABLES
      infty_tab       = <f1>
    EXCEPTIONS
      infty_not_found = 1
      OTHERS          = 2.
IF sy-subrc <> 0.
    subrc = w_subrc.
ELSE.
ENDIF.

How to achieve parallel processing in a single request?

Hi all,
I have a method in a Session EJB that will perform some business logic before it returns an answer to the client. The logic it will perform is to collect data from the applications database and two external systems, before sending all data to a third external system to get a response and send it back to the client. Each external system is quite slow so I would like to do all the collecting of data concurrent, parallel processing. How should I handle this? I'm not allowed to create my own threads in EJB's. Can I use MDB in some way? To the calling client this should be a synchronous call...
Greatfull for any suggestions
Cheers
Anders =)

Usually, the request is received by a component located in the web container, such as by an HTTP request (including Web Services). This component is able to start threads to allow parallel processing. Now, if for some reason the request arrives directly at EJB level and that you cannot move its receiver to web component, I think JMS is not a viable solution because you will switch to asynchronous processing and you have no way to make your EJB wait for the responses while preserving the client request (waiting implies programmatic life cycle management, which is forbidden in EJB container). Maybe a resource adapter (JCA) can bring a solution. A resource adapter acts as a datasource (a datasource is a specialization of a resource adapter) and thus it is a logical way to implement an adapter to an external, eventually non-J2EE, resource, as the name implies :) But I don't have enough knowledge in JCA to be sure of this.
Hope it helps.
Bruno Collet
http://www.practicalsoftwarearchitect.com

Parallel Processing in CRM 5.0 for Customer download

Hi
I was referring to OSS note 350176 for implementing parallel processing. I wanted to achieve parallel processing for request loads for Customer download.
Is it possible to achieve it by setting the parameter CRM_MAX_QUEUE_NUMBER_INITIAL in CRMPAROLTP or it can be achieved only through implementing exits?
Thanks for your help in anticipation.
Regards
Karthik

HI
Karthik in Parralllel processing first you need to set up diffent filters for diffrent types of data basic or business data, customizing and condition data R3 AC1, R3 AC4, R3 Ac5 separately then start down loading the objects to CRM , remaning objects left over can be bypassed , then set the Satus of down loading Yellow red and Blue depends up on percentage of down load y for more than 100% R for more than 75%, B for less than 50%
Reward if helpful
Venkat

Parallel Processing in CRM 5.0

Hi
I was referring to OSS note 350176 for implementing parallel processing. I wanted to achieve parallel processing for request loads for Customer download.
Is it possible to achieve it by setting the parameter CRM_MAX_QUEUE_NUMBER_INITIAL in CRMPAROLTP or it can be achieved only through implementing exits?
Thanks for your help in anticipation.
Regards
Karthik

HI
Karthik in Parralllel processing first you need to set up diffent filters for diffrent types of data basic or business data, customizing and condition data R3 AC1, R3 AC4, R3 Ac5 separately then start down loading the objects to CRM , remaning objects left over can be bypassed , then set the Satus of down loading Yellow red and Blue depends up on percentage of down load y for more than 100% R for more than 75%, B for less than 50%
Reward if helpful
Venkat

BPM - Parallel process

Similar Messages

Maybe you are looking for