BPM problem with sync interface.

Hi
I got one Abstract/Async and one sync interface in my BPM and I'm getting MESSAGE_NOT_USED error between them, my scenario is RFC to JDBC to RFC(response with different FM) so BPM receives data from RFC sender through Abstract/Async interface but after that interface, I'm getting the that error (MESSAGE_NOT_USED), the weird thing is I got another scenario almost same and its working, I did a new project with exactly the same interfaces, Mappings, interface det., Receiver det., senders and receivers but I'm still getting the same error, even I tried "RFC scenario using BPM--Starter Kit" Blog but same thing, btw everthing is 0 in SXI_CACHE, I'm going to go mad or something, please help..
Thanks

CALL FUNCTION 'Z_TSSI_INTERFACE_DUMMY'
     IN BACKGROUND TASK
      as separate unit
     DESTINATION 'TSSI_OUTBOUND1'
  EXPORTING
    jobno              = jno
    PERSNO             = pers
    BEGDA              = '20051231'
    ENDDA              = '20051231'
    ABSTYPE            = 'xx'
    ABSHOURS           = '7'
    ABSDAYS            = '1'
    FULLORHALF         = 'false'
    uname              = sy-uname
    date               = '20060201'
    time               = '110000'
  TABLES
    RETURN             = ret
    Commit Work.
The thing is this abap is working in another scenario, but when I copy the exacly the same scenario, it doesnt work, its weird, btw I noticed that evertime I run any scenario, short dump occurs, its about RFC authorization for XIRWBUSER user but I got the OSS note for that, I applied it but it didnt solve the problem, btw this short dump happens when I run my workign scenario as well.. this is driving me crazy..

Similar Messages

  • Problems with syncing interface in ITunes 10

    I just downloaded ITunes 10, and now the syncing interface will not appear for my IPod Nano (3rd generation).  How do I fix this??

    ChuahS wrote:
    Hey all,
    I just bought myself a new pc with windows7 64bit. After installing the new Itunes10 i connected my Ipad to my pc. W7 recognised the device, but it seems Itunes doesn't show my Ipad. I reinstalled Itunes, but this didn't help the problem. I also tried connecting my Ipad to every usb port that was on my pc, but none seemed to work so to show my Ipad in Itunes. This is very strange, cause on my old pc with w7 32bit and Itunes9 it showed my Ipad perfectly. Any ideas on how to fix this?
    This may be of help http://support.apple.com/kb/ts1538

  • Triggering a BPM(NW) using sync interface and get the sync response

    Hi Folks,
    I have a scenario where in I have to trigger a BPM (NW) using a sync interface from a SOAP client by making request to get the response from SAP webservice . If the response from SAP is successful then its a happy path but if it fails or times out then there is an failure mapping to ECC using an IDOC. My question is to achieve the sync process how many synchronous interfaces do I need to use? Please let me know if my design works with 4 sync interface. One outbound sync interface at the source (i.e the request ing system), the other inbound sync interface to the BPM to trigger the BPM, another outbound sync interface within BPM for the request to SAP. the fourth inbound sync interface at the ECC for the response from ECC. Or please let me know if there is a better design option than this.
    Regards
    Kalyan.

    Hi,
    Control Step
    Use
    You use a control step () to do the following:
    ·        Terminate the current process
    ·        Trigger an exception
    ·        Trigger an alert for Alert Management (see also: Triggering an Alert)
    Activities
    Terminate the Current Process
    Choose Terminate Process.
    At runtime, the system terminates the current process instance, including all active steps, and sets the status for the process to logically deleted.
    Trigger an Exception
    Choose Trigger Exception and specify the triggering exception (see also: Exception Handling). The relevant exception handler must be defined in the same block or a superordinate block.
    The system triggers the specified exception at runtime.
    For more information about using exceptions, see Example: Collecting and Bundling Messages - One Interface.
    Proxy..
    How to create proxy.
    http://help.sap.com/saphelp_nw04/helpdata/en/14/555f3c482a7331e10000000a114084/frameset.htm
    How to Activate Proxy.
    /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
    ABAP Server Proxies (Inbound Proxy)
    /people/siva.maranani/blog/2005/04/03/abap-server-proxies
    OutBound Proxy (Client Proxy)
    /people/sravya.talanki2/blog/2006/07/28/smarter-approach-for-coding-abap-proxies
    /people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
    File to R/3 via ABAP Proxy with good example
    /people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
    Debug your inbound ABAP Proxy implementation
    /people/stefan.grube/blog/2006/07/28/xi-debug-your-inbound-abap-proxy-implementation
    Thanks,
    Satya Kumar

  • Problems with Syncing to Lightroom Mobile

    I have the following problem with syncing to Lightroom Mobile:
    In Lightroom desktop it seems that the collections will be uploaded correctly (number of images is counting down to zero). Changes will also be uploaded.
    In the web interface I see the collections somtetimes and sometimes not. I can make them appear if I chose the "make collection public" in Lightrrom desktop.
    In the iOS App there is absolutely nothing happening: "There are no collections"
    I have the recent versions of all applications and OSs. I have deleted and reinstalled the iOS App.
    Thanks in advance for your help!
    Regards
    Zippo

    Hi,
    we should have fixed this on our side now, please try to sync again and let us know if it helped.
    Thanks,
    Ignacio

  • Problems with syncing  Adobe Ideas with Adobe Creative Cloud

    Dear Sir/Madam,
    Since yesterday (22.04.2014) I have problems with syncing Adobe Ideas (in my iPad) with Adobe Creative Cloud.
    Could you please help me with this issue?
    Thanks in advance

    Hello,
    I do not understand why there is no professional communication about the problem. I get the impression that Adobe doesn't know that many people use their App as advertised: As a quick professional sketching tool that syncs with Creative Cloud. Not to fix the problem means more people not trusting the cloud idea. I am actually a big fan of the CC, mostly because of regular updates. But the mobile apps seem to fall out of the normal update scheme. Are they not as important as the 'main software'?
    When will the bug be fixed? Just to make clear: As there - up to now - is no other way to get the original idea files on the computer the adobe idea app is useless unless you fix the problem and/ or include the possibility to sync files via USB.
    Meanwhile my Workaround:
    You need Phoneview or another software that shows the files on your mobile device.
    Open it - choose "Apps" - click on "Show all Apps" - click on "Adobe Ideas"
    Than go to:
    Library/Private Documents/documents/data/files/
    there you find folders with cryptic names
    Download one of the folders
    Open the Folder
    select all files in the folder and zip them
    Change the extension from .zip to .idea
    and voila
    you can open it with Adobe Illustrator!
    A long way, but for now the only solution to get the editable vector file on your computer.
    Best regards
    Jo Jacobs

  • Problems with Syncing iPhone 3G (4.2.1. iOS).  What is appearing in the status bar is "Syncing "untiled playlist.." and its stuck at backing up.  I noticed that my name has been replaced to "untitled playlist". Whats wrong

    Problems with Syncing iPhone 3G (4.2.1. iOS).  What is appearing in the status bar is "Syncing "untiled playlist.." and its stuck at backing up.  I noticed that my name has been replaced to "untitled playlist". Whats wrong

    Welcome to Apple Discussions!
    Maybe a long shot, but WD is not known for the quality of some of their enclosures, although I do like the drives themselves. It may be worth mounting this drive in a different enclosure, something like one of OWC's FireWire enclosures with the highly reliable Oxford chip sets. I wouldn't be inclined to trust a WD enclosure, especially if it already seemed to be acting in a flakey manner.
    Here's an example of what I mean:
    http://eshop.macsales.com/item/Other%20World%20Computing/MEP924FW8E2O/
    I have 3 of these and I really like them.
    From what I understand, if the drive spins up, it is often possible to recover data from it. To be absolutely certain to destroy the data, you just about have to take a hammer to the disk. Hopefully, there will be a way to get your data back.
    Good luck!

  • I have an iPhone 4S and never had a problem with syncing it. But suddenly, when I connected my phone to my mac, it says that its in recovery mode, and I need to restore it in order to sync. I've updated both my phone and my itunes, and it didnt work.Help?

    I have an iPhone 4S and never had a problem with syncing it. But suddenly, when I connected my phone to my mac, it says that its in recovery mode, and I need to restore it in order to sync. I've updated both my phone and my itunes, and it didnt work.Help?

    fighter19lisa wrote:
    that only makes it say its synced, when its not.
    No, it does not.  It transfers purchases from the iDevice to the computer.  The computer must be authorized for the Apple ID that the content was acquired with.
    fighter19lisa wrote:
    my playlists wont show up on the phone.
    Are they selected to sync?  Is Manually Manage content on the device selected?
    fighter19lisa wrote:
    i had to change my password for my aol account again and i still cannot get my email on my phone to even work
    What does that have to do with syncing content to the device?  FYI, nothing.

  • I have problem with syncing in itunes and it stared since i installed new version of itunes.it stuck in backup step for houres.what shud i do?

    I have problem with syncing in itunes and it stared since i installed new version of itunes.it stuck in backup step for houres.what shud i do?

    So, in iTunes, when you look at the shuffle's content (in the sidebar) and click on the playlist under the shuffle, over to the right, the songs are in your desired order, correct?  Where do you look, or what do you do, that indicates the playlists are in alphabetical order?  Are you saying that when you play the songs while using the shuffle, they play in alphabetical order?
    If so, when you listen to the songs on the shuffle, are you using the playlist, or are you using the All Songs list? If you are in the default All Songs list, with the shuffle's power switch set to play-in-order (the middle position), the songs play alphabetically, I believe. 
    The 3rd gen shuffle uses VoiceOver.  If you are in the All Songs list, you need to use VoiceOver to switch to the playlist (see manual linked below for details).  When you are in the playlist (with the shuffle's power switch set to play-in-order), then the songs should play in playlist order.
    There are more details in the manual for the 3rd gen shuffle, which is online here
    http://manuals.info.apple.com/en_US/iPod_shuffle_3rdGen_UG.pdf
    See page 22 for the section about setting up and using VoiceOver.  The part about switching playlists starts on page 23 (Using the Playlist Menu).

  • After update 8.1.2 i had problem with sync my content from ITunes with IPod

    After update 8.1.2 i had problem with sync my content from ITunes with IPod. It stucks on moment when its waiting for implementing changes (step 5 of 5) Hours and hours i'm waiting but still the same. So i cant use my Ipod at all. I restarted Ipod and delete and download Itunes again. Still stuck in the same moment. Help please. Someone has some problems like that?

    I have an error message saying that "An unknown error occurred (-54)"

  • Problem with syncing AD users (LDAP)

    I am running into a 'problem' with syncing users from ad. I'm pretty sure i'm doing something wrong but i can't figure it out.
    When i sync manually the 'pop up' shows that it's synchronizing and after a few seconds it tells me "OK". But there are 0 users imported.
    http://www.dualdude.net/bm/run_ldap_sync.jpg
    The connection and credentials to access the AD work since they are also used for Zarafa and Samba AD synchronization. The AD is running on an Windows Server 2008 Enterprise x64 machine.
    This is a screenshot of the configuration used:
    http://www.dualdude.net/bm/ldap_config.jpg
    Any thoughts on what i'm doing wrong?

    I got the same problem when using groupfilter:
    User Filter: (&(|(objectClass=Person)(objectClass=orgPerson)(ob jectClass=inetOrgPerson))(groupMembership=cn=users ,ou=org,o=firma))
    Group Filter: (&(|(objectClass=group)(objectClass=groupOfNames)( objectClass=groupOfUniqueNames))(|(cn=G4)(cn=TC*)) )
    Do you use groups for the allowed users in teaming?
    >>> lnijhuis<[email protected]> 14.01.2010 16:36 >>>
    Thank you for your reply. I guess the comma's should be right. When i
    change the first "ou=" in the Base DN to "cn=" the error message states
    that the best it can do is reach
    ou=OrganizationalUnit,dn=domain,dn=local. So i guess that shouldn't be
    the problem?
    By default there is a container "Users" in AD, which we don't use. The
    person that configured the server created an OU on the same level as the
    default container. THe name of this OU has a space in the name, like
    "Organi Zation". This OU contains another OU called Users. This is where
    the users are located. When i run the ldap query i don't get any errors
    about the base DN. It does when i change it.
    The full filter is:
    (|(objectClass=Person)(objectClass=orgPerson)(obje ctClass=inetOrgPerson))
    lnijhuis
    lnijhuis's Profile: http://forums.novell.com/member.php?userid=63756
    View this thread: http://forums.novell.com/showthread.php?t=397993

  • Problem with syncing audionooks

    Hi
    I have an iPod shuffle 4th generation ..
    I have a problem with syncing audiobooks. I have the audiobook file at my desk. When I drag and drop to the audiobooks section in iTunes it doesn't go to it's right place. Instead, it goes to the music section.
    I tried to restore it but the problem still there..
    can anyone help me please ?
    Thank you

    picas wrote:
    Change the media kind to Audiobooks. If they're mp3s iTunes will only recognize them as music files.
    Thank you so much .. it worked

  • HT1296 Have a problem with syncing. I get this message: The ipod Bill's Ipod" cannot be synced because there is not enough space to hold all of the items in the iTunes library (additional 2.4GB required) I don't understand as I have much more space than 2

    I recently ran into a problem with syncing my ipod touch to itunes on my Windows 7 pc. It had previously been synced to my older laptop
    and I wanted to change to my newer Windows 7 laptop's itunes library that I had already been syncing with.
    Anyway, I started seeing this message that prevents my from syncing:
    The iPod "Bill's iPod" cannot be synced because there is not enough free space to hold all of the items in the iTunes library
    (additional 2.48 GB required)  
    Not sure if it is talking about my iPod free space or my PC itunes library free space. Either way I have 11.0 GB free space available
    on my iPod and 412 GB free space available on my Windows 7 PC.
    How do I handle this problem?   Please help!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    Thanks

    It is saying that the iPod does not have enough free storage to sync all the items yu have selected to sync to the iPod. You need 2.48 GB more free on the iPod. You need either to select less to sync or delete some content form the iPod.

  • Problems with syncing my ipod

    Yesterday I updated my iPod tot 1.1
    After that it had that crappie bug with the video's, so I downgraded my iPod. After that I updated it again tot 1.1
    Now I have a problem with syncing my iPod (video's only).
    First I had some series it synced with my iPod, also after the first update. But after the second update it tells me there are some files it couldn't sync. (some videos it did sync btw, and the problem with the sound has gone, I can play movies normal now!)
    So the problem is now that it doesn't sync all my movies anymore, and I converted all of them with the same program..
    Anyone has the same problem or knows how to solve?

    Mijn advies: terug naar versie 1.0. Tenzij je versie 1.1 nodig hebt, natuurlijk (voor radio o.i.d.). Of wachten op versie 1.2
    Ik heb zojuist versie 1.0 geherinstalleerd, en alles werkt nu prima. En telkens als iTunes vraagt of ik de nieuwste versie wil installeren klik ik op NEE.

  • Reminder. Problem with sync

    I have problem with sync my iPhone and MacBook Pro.
    I have already made a check with the parameter and they're correct.
    For example.
    Yesterday I have made a reminder on the iPhone for today, I have received the alarm, I have changed it on MacBookPro and I have discovered that on the iPhone there isn't the update.

    Hi ...
    On your Mac open System Preferences > iCloud. Deselect the box next to Reminders then reselect it.
    On your iPhone, tap Settings > iCloud. Switch Reminders off then back on.
    Give iCloud a few minutes to re sync the data.

  • I have problems with syncing my events folders från MacBookAir to Ipad2. Some pictures show and not others?

    I have problems with syncing my events folders från MacBookAir to Ipad2. Some pictures show and not others?
    Anyone else having this problem?

    Try deleting the photo cache from your computer and then re-try the photo sync and see if they then copy over - the location of the cache, and how to delete it, is on this page http://support.apple.com/kb/TS1314

Maybe you are looking for

  • How to call report rdf with parameter passing..

    Hai I am using 10g developer suite and 10 g report. I want to call some report in the when_button_pressed trigger. like c:\ report\ test.rdf file. we don't have separate application server.more than 10 users using forms and report. Without applicatio

  • XI 2.0 Message Mapping Activation Problem

    Hi All, When I attempt to activate a message mapping, I receive the following message: Activation of change list cancelled Check Result for Object Message Mapping ZHRMD_A05toEAI | http://com.sl.xi: *Starting Compilation *Error while Compiling This is

  • Error in creating RSDS using transfer rules for master data datasources

    Hi , when i am creating the transfermations(RSDS) using transfer rules for master data datasources while i want to migrate datasource.it is giving the error message saying that INITIAL ERROR OCCURED DURING GENERATION OF THE TRANSFERMATION.AND in the

  • Final Cut Express 4.0 vs 3.5

    I am in the process of wanting to upgrade from FCE 2.0.  I have the option of upgrading to FCE 3.5 or FCE 4.  Which of the two should I choose?  Is there an advantage of one from the other?  I just purchased a Canon HD recorder which uses SD cards to

  • How to change subscription type

    Hi. I've mistakenly bought subscription to Ukraine to landlines, but wanted to buy a subscription to mobiles and landlines to Ukraine. I cannot wait until my active subscription ends next month and take my money back to buy new subscription. Solved!