BPM sending messages to wrong inbound interfaces in PI and target system

Hi All,
i am doing File to proxy scenarion using bpm.i am receiving three files,two files splitting on based condition(location code) in receiver determination and sending to bpm(here one bpm receiving 3 files then it merges 3 files into one proact and some promo messages based promos in source file ,same in the second bpm with 2 files with different mapping,here target system is SAP APO SNC).i am doing testing now mapping and every thing is working fine.but first bpm sending messages(proact and promo messages) target sytem side (proact_in and promo_in)inbound inrefaces.if i am executing scenario both bpm sending (proact and promo) messaegs in target system its showing wrong bpm name.in target system also we can check messgaes sxmb_moni.
ex:if first bpm A sending 1 proact and 2 promos,and second bpm B sending 1 proact and 2 promos to target system,but in target syetm its showing sender component as 1st bpm A for 3 promo messages(here B bpm messages sending with A bpm viceversa i did the configuration correctly) and for 1 its showing second bpm. please give me suggetions how to resolve this issue.
Thanks,
seshagiri.

Is the connection to SNC via idocs or proxies. If it's via idocs can you check the control record and see if the issue is not there ?

Similar Messages

Mail with multiple gmail accounts sending messages from wrong email, other than the one i select

mail with multiple gmail accounts sending messages from wrong email, other than the one i select:
i'm using mail on osx 10.7 with multiple gmail accounts. when i create an email, i check to be sure i'm sending/replying from the correct account. after i send it, somehow it actually sends it from a different account, other than the one i've selected "from." this is evidenced by the reply email i receive. how can i fix this?
in preferences, i have "send new messages from : account of selected mailbox"

From the Mail menu bar, select
          Mail ▹ Preferences...
The Mail preference dialog opens. Select the Composing tab from the row of icons at the top. From the menu labeled
          Send new messages from:
choose
          Account of selected mailbox
Note that this setting may have no effect if you start a new message while a VIP or smart mailbox is selected in the mailbox list. Those are saved searches, not actual mailboxes.
If the problem remains, select the Accounts tab in the preference dialog, then select the affected account in the list on the left.
In the Account Information pane, select the correct server in the menu labeled
          Outgoing Mail Server (SMTP)
If there's only one server in the menu, select
          Edit SMTP Server List...
and add a new server with the correct settings. If you're not sure how to do that, try the Mail Settings Lookup.
Another possibility is that the wrong card in your address book is selected as yours. Select your card in the Contacts application. Then select
          Card ▹ Make This My Card
from the menu bar.

I've been texting my friend with iMessage with wifi on and all of a sudden it changed to text message and won't let me send messages. My wifi is still on and working but it won't switch back to iMessage. Please help

I've been texting my friend with iMessage with wifi on and all of a sudden it changed to text message and won't let me send messages. My wifi is still on and working but it won't switch back to iMessage. Please help

What I recommend you try doing first is to turn iMessage off then back on. If that doesn't work, make sure that your Apple ID and password are correct. If everything seems correct and you still can't send out messages using iMessage instead of text message, I think you should either try calling AppleCare at 1-800-MY-IPHONE (1-800-694-7466) and/or scheduling an appointment at the Genius Bar at an Apple Store (that is, if there's one close to you).
Hope this helps!

XML message error "No inbound interface found "

Hi,
I have inbound file adapter and mine is standalone XI box,
and idoc outbound adapter, when i start the file adapter im getting the folloing error message in SXMB_MONI .
Error when determining inbound interface. No inbound interface found for sender XI1 and outbound interface FILE2IDOC.FILEINBOUND
pls help me.
thankx

The message is telling you the exact problem - you do not have a receiver identification configured in the Integration Directory for this combination of inbound interface, namespace, and business system. Make sure your file adapter is configured to send with the correct outbound interface/interface namespace.
HTH,
Paul Medaille

Messages sends message to wrong account despite explicit selection

All the time I am sending messages to the wrong service for users, even after explicitly selecting to right one. In Messages, I have Google Talk, AIM (for the one person who still uses it, haha), my work Jabber account, and iMessage configured. The problem is when I have accounts for one individual in my Contacts under multiple services. For example, I may have John Doe's Google Talk username, and their phone number which I can iMessage.
If I open a new message to John Doe on Google Talk, and verify the message has the Google Talk username selected (and states my Google Talk name next to it) in the drop down at the top of the message, when I hit send it will sometimes go to iMessage instead. This is very repeatable. It seems like what happens is Messages switches the new message to whatever account I received a message from John Doe last, despite my explicit selection.
Needless to say this is very obnoxious, especially since I cannot count on my selections actually being being obeyed.
Has anyone else experienced this problem, and figured out a way around this bug? I keep hoping Apple will fix it, but I've run into this problem in previous versions of Messages prior to Yosemite being released, but I am still having this maddening issue after the upgrade. I cannot not be the only one.

I don't always want to use the same one... for example, if they're signed on to Google Talk, I'd like to message them there instead of sending an iMessage to their phone.
Even if I double click their name in my Google Talk buddy list, it will open saying I am going to message them with Google Talk, but it was switch when I hit send.

Multiple inbound interfaces (xml) but one target (idoc)

Hi Experts,
I am trying to setup in ID four inbound interfaces (eg. MessageType1-MesageType4) and each has an interface mapping having the same target idoc (eg. Shpmnt05).
Also, there is a condition set per interface mapping.
Should I create four sender agreements that is one per message type? If so, how many interface determination is needed? Any advise please.
IR
Message Interfaces:
OA_MessageType1
OA_MessageType2
OA_MessageType3
OA_MessageType4
Interface Mappings:
OA_MessageType1_to_Shpmnt05
OA_MessageType2_to_Shpmnt05
OA_MessageType3_to_Shpmnt05
OA_MessageType4_to_Shpmnt05
ID
Receiver Determination:
|Party1|Shpmnt05
Interface Determination:
Sender Agreement:

However, how are we going to handle the interface determination? I believe in the interface determination setup it asks for the message interface suppose MessageType1.
Now, I need to set-up the condition (eg. operationtype=Create) for that message interface and set interface mapping. For this one the interface mapping to be used is OA_MessageType1_to_Shpmnt05.
But in this case, i need to add another condition (eg. operationtype=dummy) so that the first condition will be saved, correct? I think if I only have one condition in the interface determination, once activated the condition is gone.
Having said, are you suggesting that i need four interface determinations?
Or is it possible to just have one int. det.?

Interface between UC and fire system

Hello,
We are trying to find a way to dial an extension number on our Cisco VoIP phones, that would enable the interface on our firelight alarm system.
In the old days it was just a plc interface that you could change some logic.
The company of the alarm system states that they only need an acknowledgment signal to activate a relay.
Is there a module that can go between a phone or UC system and the firesystem that anyone knows about.
There also maybe another way to do this and if anyone knows a good way, please let me know.
Thank you very much,
Jim

Ask the alarm company what is the interface device the use with other customer PBXs.
Buy and connect it to an FXS port.
If they can't indicate one, get something like a door opener.

Mail 8.2 Sending Messages from Wrong Email Account

This has been happening more often than not lately on the Mail 8.2 app. It's driving me crazy, and really messing up my business since I have a professional email (using Outlook) and a personal email (Gmail).
Both email accounts are setup on my Mac Mail. What has been happening is that when I write an email with my professional email (Outlook) and hit send everything seems fine and it will send (like it should!). It shows up in my sent messages in the Mac Mail app under my Outlook account and everything, great!... Oh, but the thing is, it doesn't really send from my Outlook account.
When I log into my Outlook account on my web browser, the email is not shown to have been sent. But, When I log into my Gmail account on the web... What?! There is the message in my Gmail sent folder! How??? It has my signature from my Outlook account and everything. To add to the strangeness, when I look at my Mail app on my iPhone, it says that the email was sent from my Gmail, and not my Outlook...
So, Mail on my Mac says sent from intended email account (Outlook), but in reality it somehow gets magically sent from my personal Gmail account... and shows up on the webpages and my iPhone as sent form Gmail... This doesn't happen every time. Just when Mail feels like it I guess, HA!
This is frustrating. Since it doesn't happen all the time, I never know if people are getting my emails, but I finally got the fluke to happen with a friend. Voila, in fact when this happens even though it's being sent in Mail though my Outlook account, my friend receives the email from my Gmail account with my Outlook signature...
What is going on? Is anyone else having this issue?
I need my personal and professional messages synced to my iPhone and Mac, or I would just say good riddance to the Mac Mail app.
I will just have to start sending my professional messages form the Outlook webpage until this is fixed. This is really unprofessional Apple. I never had this issue prior to Yosemite.
Hope this made since, it's the best I can make of it.
Thanks!

From the Mail menu bar, select
          Mail ▹ Preferences...
The Mail preference dialog opens. Select the Composing tab from the row of icons at the top. From the menu labeled
          Send new messages from:
choose
          Account of selected mailbox
Note that this setting may have no effect if you start a new message while a VIP or smart mailbox is selected in the mailbox list. Those are saved searches, not actual mailboxes.
If the problem remains, select the Accounts tab in the preference dialog, then select the affected account in the list on the left.
In the Account Information pane, select the correct server in the menu labeled
          Outgoing Mail Server (SMTP)
If there's only one server in the menu, select
          Edit SMTP Server List...
and add a new server with the correct settings. If you're not sure how to do that, try the Mail Settings Lookup.
Another possibility is that the wrong card in your address book is selected as yours. Select your card in the Contacts application. Then select
          Card ▹ Make This My Card
from the menu bar.

Tried to share a picture from iPhoto and it won't send .message says wrong password

I tried to send an iphoto to an email address. I have done it before, even today to another email address and it worked.
Today it refused to go out.
Says my password did not match my e-mail address.
When I tried to do it again I get the same message. It does not let me try another password.

That's been a frequent problem. Go to iPhoto's Accounts preference pane and delete the email account that is being used by iPhoto. Then add it back and try again.
A better solution, IMO, is to set Mail as the email client for iPhoto in iPhoto's General preferendce pane. Using Mail gives you sent copies of all emails, better access to your Contacts and, if you you want a fancy layout like iPhoto offers, you can us one of Mails many stationary templates.
OT

I can no longer send messages from Thunderbird; I've restarted Thunderbird and my Mac to no avail. Do I need to re-install Thunderbird?

Thunderbird still picks up my incoming mail just fine. I've compared my account setting with my husband's, who shares this email address (on his PC), and we can't find a discrepancy.

https://support.mozilla.org/en-US/kb/cannot-send-messages

I cannot send message using iMessage. I have ipad2 and even my FaceTime I can't use

Please help.. I can't use it properly.. T_T

Clive11 wrote:
Please help.. I can't use it properly.. T_T
You're going to need to give a few more details. What is happening when you try to use them? What troubleshooting steps have you already taken? What, if any, error messages are you getting?

How to send messages from a JOB to OS task and back.

I have a job (PL/SQL code) in database and a task in OS (C code). The problem is how to
organize the interchange of messages between these two tasks. Are there any signals,
semaphores or other objects i can use. My only solution is to do it via OS file. Are there any other .. ?
Thanks.

Try dbms_pipes
null

The interface between SAP and Banking system

Hi gurus,
Now we want to integrate SAP system and Banking system.I have some questions need to ask you.
First, do we have any PI Content regarding that?I failed to find any content in service market
Second,which kind of adapter techniques I can choose to configure?
Currently I think the possible solution may be as follows:
1. Create custom ABAP program to generate txt files,then use XI FTP adapter to translate those files to another location,where banking system can dispose accordingly.
2. The similiar techniques as 1,but to use ABAP proxy on SAP side.Through this way no txt files are generated,so it's more secure.
3. Using idoc techniques.I'm very interested in that,but can we implement this scenario by using idoc?How?
Any info or tips regarding banking data integration will be appreciated.

When it comes to functional view,do you know what kind of data need be tranlated?
This is again something that only the Bank can answer. There are many standards which are in use with various banks. e.g some banks use EDI for all types of processes. You have to confirm from the bank about the format in any case. It is also possible that the bank uses proprietary format. You may use both file or jdbc adapter.
it seems XI supports FTPS protocal, right?
Correct
But some files may be need to be installed on WAS.
The public certificate of bank.
Regards,
Prateek

Trnsporting of iboun and outbound Idoc interface to QA and PRD systems

Hi,
We have successfully completes the developement of our File to/From Idoc scenarios on Dev environment. Can some tell me how can I transport these to QA and PRD systems? How about the WE21 BD54(On Bus Sys) IDX1 and IDX2 configurations transports? Do we need to do them searately on each of the systems? Or they are transfereable too?
Thanks.
Sri.

There are two ways to Transport XI objects-
1) File Import/Export -- Simple and easy.
2) CMS
CMS is somewhat standard way to do. Becuase you can track the objects. But for this you need to install the CMS separately.
just go thru these quick links-
http://help.sap.com/saphelp_nw04/helpdata/en/e1/69a740aa053a13e10000000a155106/frameset.htm
XI Software Logistics Solution III: CMS
Also check in service.sap.com- for how to guides-
https://websmp201.sap-ag.de/nw-howtoguides
The other way is using CMS. Refer to following series of blogs for step by step process.
XI Software Logistics 1: SLD Preparation
XI Software Logistics II: Overview
XI Software Logistics Solution III: CMS
Refer to how to guides for setting up CMS.
https://websmp106.sap-ag.de/~form/sapnet?_SHORTKEY=01200252310000071155&
1. WE21 -- Creating Port--.
Yes. You can do them separately in individual system.
2. BD54 -- Logical system. You can create in individual system or you can transport the table having logical system entry i.e. TBDLS and TBDLST.
Hope this will help.
Nilesh

Send Message Synchronously

Hello,
please help me to solve a problem.
I need you to check my XI design and configuration. I confused at all.
I have a task to send an information from MSSQL DB to SAP.This information is based on query to the DB. At first we must be sure the information is present in DB and therefore we do a small query to be sure. If it is true we do the extended query. After that we transform the received information and send it to SAP.
I use BPM. I've realized the classic scheme as described in some blogs.
But I simplified my scheme to debug it and removed any correlation and switch steps.
My scheme is:
Receive Step -> Synchronous Send Step -> Transformation -> Send Step.
What i have done:
Receive Step
1) I've created DT, MT for outbound interface(simple query)
Then I've created a couple of the MI one real and one abstract for Receive step.
Synchronous Send Step
2) I've created a couple of DT, MT for request and response messages accordingly. (Note:The DT of request message used a construction like that - access=SQL_QUERY).
3) Then I've created two couple MI two real MI and two abstract MI for Synchronous Send Step.
The request MI is inbound. The response MI outbound.
Also Ive created abstract synchronous MI and included in it two MTs (request and response MTs).
4) Then Ive created MM and IM to transform outbound MT into request MT of sync interface. In IM I used real(not abstract) outbound MI as source and real request MI as target. It is dummy mapping to initiate extended query only in Synchronous Send Step.
Send Step
5) Then Ive created MM and IM for transformation step in BPM. I use abs MI of response interface as source and IDOC as target.
In Abs interface list in BPM I have one abs inbound interface(RS), two outbound interfaces(Synchronous and ABS for IDOC). Abs Req and Res interfaces are neither inbound nor outbound in BPM.
It is the BPM design.
Configuration Stage
5) At the Configuration Ive created JDBC sender channel for outbound interface (Receive Step), JDBC receive channel (for Sync Step request) and IDOC receiver channel.
6) At Receive Determination I used as sender DB service and as receiver abs MI of Receive Step of BPM.
7) Then I used as sender BPM with OB synchronous interface of BPM and as receiver MSSQL DB service with Request interface as its inbound interface becouse I used JDBC receiver interface. (I doubt here!)
8) At last I used as sender BPM with response interface of BPM and as receiver SAP system with receiver IDOC interface of SAP system.
In SXMB_MONI(PE) I see only first message which incomes in BPM and error status for Synchronous Send Step - Send Message Synchronously Error ! Nothing else!
I feel I've made some mistakes but I don't know where they are!
Please help me!
Thanks!

check in the column PE to see the graphical workflow log. This would help to debug the issue.
and is ur scenario fo this kind:
you send a request message to a DB and in turn recive a respnse. Based on the response u carry out the transformation and send to the target i.e. r3?
chek the below log of handleing sync jdbc call. this shud help u out.
/people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step

BPM sending messages to wrong inbound interfaces in PI and target system

Similar Messages

Maybe you are looking for