Bpm setting not being saved

I have found that when opening previously saved multitrack sessions the bpm rate has not been saved (it reverts to whatever the setting was in the previously opened multitrack session.) Is this means of saving information adjustable? If so, how do I do it? If not, it means that I have to keep a record of this data elsewhere which is not very convenient.
Thanks.

Happy to be corrected but I think this was happening in CS5.5 but may have been fixed in CS6
What version of CS are you running?
Edit: I thought one of the devs may have mentioned this

Similar Messages

  • Save Output to: setting not being saved

    This has been driving me nuts for a couple of years, so I figured I'd finally ask if anyone else sees this behavior.
    My script grabs a PDF and converts each page to new, separate, PDF files using a custom name and number. There are three components: Ask for Finder Items, PDF to Images, and Make Finder Item Names Sequential.
    My problem appears in the PDF to Images part. I have the "Save Output to:" setting set to a folder ON my desktop (Outbox). Every time I open the script it has reverted to "Save Output to: Desktop". I can change it, run the script from within Automator, and it works fine. If I save it (or save-as), when I next open the script, it will have reverted to Desktop. I have tried every iteration I can think of to get it to remember to store the files in the correct folder, but it just won't save this setting.
    I am in the habit of just opening the script first, and changing the setting, then running the script before I have closed it, so this is no big deal -- but it does make it two more steps, which kinda defeats the whole purpose of automator.

    Understood, but you mentioned scripts and AppleScript is used extensively with workflows. If there aren't any in yours, then all I can suggest is peruse http://www.automatedworkflows.com/tips/podcast.html
    Also, see http://discussions.apple.com/thread.jspa?threadID=2039384 and Introduction to Automator tutorial at http://automator.us/leopard/video/index.html

  • Auto Login Setting Not Being Saved

    I'm trying to enable auto login. When I go to sys prefs and set auto login to the userid I want and exit sys prefs then go back to sys prefs it is reset to the original user. Any ideas what is wrong?

    Try to move this file on th desktop and restart :
    youraccount/Library/Preferences/ByHost/com.apple.systempreferences.xxx.plist
    HD/Library/Preferences/com.apple.loginwindow.plist
    If doesn't fix the problem , put them in their original place.

  • Messages are not being saved on N96

    On my N96 I have set save sent messages and receive report as 'yes' but after updating firmware (20.050) messages are not being saved.Is there any solution to someone.

    I have exactly the same problem with my N95 but I can't really say when it started. Suddenly I just noticed my phone didn't save sent messages anymore and hadn't done it for some time, but can't really tell after what it started to occur. Really strange problem, not even reseting back to factory settings helped - after I put "receive report" option back it stops saving sent messages to sent folder. Actually if I go to "sent" folder quickly after sending the sms, it shows there for little moment before disappears. Really strange. I couldn't google any other information about this problem than this topic.

  • I've been editing images with ease for a long time but now the changes are not being saved.

    I've been editing images with ease for a long time but now the changes are not being saved.
    Also, it is not liking me adding a large ammount of images in one go?

    Remember: we cannot see your machine. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS.  So to get help you need to give as much information as you can. Basic things like :
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. As full a description of the problem as you can. For instance: 'iPhoto won't export' is best explained by describing how you are trying to export, and so on.
    - History: Is this going on long? Has anything been installed or deleted?
    - Are there error messages?
    - What steps have you tried already to solve the issue.
    - Anything unusual about your set up? Or how you use iPhoto?
    Anything else you can think of that might help someone understand the problem you have.

  • Table extension not being saved

    Hi,
    I have implemented Table extension at item level for SC and from the config perspective all looks fine.
    1) Created Append struture with required fields
    First step: appending the field to the correct structure in SE11 or via transaction SPRO.
    Structure names for table extensions are according to the pattern:
    INCL_EEW_PD_<x>_CST_<y> with
    <x>: HEADER, ITEM
    2)
    Path in IMG (transaction SPRO):
    SAP SRM -> SRM server ->
    -> Cross-Application Basic Settings
    -> Extensions and Field Control (Personalization)
    -> Create Table Extensions and Supply with Data
    -> Define Customer Table Extensions on Item Level
    Second step: you additionally need to append the new table extension field to the
    corresponding INCL_EEW_PD_<x>_CST structure called u2018cross-documentu2019 structure. This can
    also be done in IMG
    You can explicitly enter the very same field(s) (name and type) into both append structures.
    It is recommended, however, to first create another structure with the new field (in SE11) and
    then include that other structure in both append structures
    (menu path in SE11 screen: -> Edit -> Include -> Insert).
    Default append structure names in this example are
    ZAINCL_EEW_PD_ITEM_CST_SC and
    ZAINCL_EEW_PD_ITEM_CST
    when using the IMG path..
    3)
    Third step: Set visibility of the table extension.Create an entry with TICUS for item data (THCUS for header data).
    Donu2019t miss to populate the Transaction Type field - you could save the table entry without it,
    but it will not work!
    4)
    Fourth step: Configure Control of Fields of Table Extensions. Create an entry with TICUS for item data (THCUS for header data).Donu2019t miss to populate the Set Level field - you could save the table entry without it, but it will not work!
    Fifth step: Configure Control of Actions
    Sixth (final) step: SM30 - maintain view /SAPSRM/V_MDFSBC_DEFAULT
    I have rechecked the config several times but could not find any reason for the data not to be saved.
    When I add the data to the table structure and if click enter or check button the data disappears. The entries are not captured in BBP_PDICF  table either. i can see the Z structure in se11 for BBP_PDICF.
    I have checked doc_change badi for any issues but could not find the issue. Any idea as where I should check for the data not being saved issue?

    Hello Srinivas,
    Please do this step:
    In SM30-maintain view /SAPSRM/V_MDFSBC_DEFAULT
    Object set type :TICUS
    Structure field name : custom field
    Object type : BUS2121
    set level : item
    Field visible : X
    field enable : X
    Regards,
    Neelima

  • Window preferences not being saved

    Hi there -
    Using InDesign CS4 on Windows XP.  A few days ago a problem started happening - whenever I close InDesign, my preferences for which windows (Tools, Pages, Links, Character) I have open are not being saved.  Takes me 3-4 minutes every time i open InDesign to put everything back the way it should be.
    I've installed updates, no dice, and have deleted the preferences file as suggested by this thread:http://forums.adobe.com/thread/526990
    Any other steps I can take?
    thanks in advance,
    Andrew

    Those things are saved as part of the workspace. It sounds as if the current workspace file has become corrupt. Close ID, then go to your user profile and you'll find the workspaces folder under \Application Data\Adobe\InDesign\Version 6.0\<language>\Workspaces. Delete the "current" xml file for the workspace and restart ID. The workspace will be restored to the conditions set when it was saved, but hopefully will remember changes again when you close the program.

  • Flash CC crashes after publishing iOS app + publish settings are not being saved to file

    I have two issues:
    1. Flash CC crashes every time I publish an iOS app
    2. My Publish Settings are not being saved
    1. Flash CC crashes every time I publish an iOS app
    Since yesterday Flash CC keeps crashing right after I publish an iOS app. The app is published correctly though. I tried everything from restarting my MAC, reinstalling Flash, removing the folder "Flash CC 2014" inside Application Support/Adobe. But all this did not work.
    2. My Publish Settings are not being saved
    Since the first day I installed Flash CC, it did not save my publish settings along with the .fla-file. I never had this issue with Flash CS 5.5. This was not a very big issue, but now every time I publish an app and Flash CC crashes I have to fill in all the publish settings manually. Now I'm getting frustrated. Even saving my settings as a preset, storing it inside a folder and importing it again, won't help. Then I will get the message: "Import failed: invalid profile file."
    Can please anyone help me with these issues? It is quite time consuming to continuously enter the settings manually after every crash.
    Thanks!

    reset your preferences -
    after effects:  http://helpx.adobe.com/after-effects/using/preferences.html
    dreamweaver:  https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html
    flash:  http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
    illustrator:  http://helpx.adobe.com/illustrator/using/setting-preferences.html
    indesign:  https://forums.adobe.com/thread/526990
    photoshop:  https://forums.adobe.com/thread/375776
    photoshop elements:  http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm
    premiere pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html

  • Recently, my passwords on many websites are not being saved, forcing me to log in every 15 minutes or so.  Is anyone else experiencing this?  I am wondering if it is a result of a "bad" update?

    For the past few weeks, I have noticed that passwords on many different websites are not being saved.  I literally have to log back into each page every 15 minutes or so.  Is this the result of a bad software update?  Have an appointment at the Genius Bar tomorrow but if this can be resolved without going in, it would be preferred. 

    For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices. 
    That all works.
    It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now.  They are all synced, and all was working just fine.
    I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
    Thanks for listening,
    Melissa

  • My Usernames Passwords are not being saved, the pop up question about saving a password or not never shows. Please let me know how I can fix this problem.

    My usernames and passwords are not being saved. I never get the prompt:
    "Do you want Firefox to remember the password?"
    I've tried the help screens but I can't find the answer. Please let me know how this can be fixed.
    Thanks,
    Doug Clarke

    Make sure that you have set Firefox to remember passwords.
    * Tools > Options > Security: Passwords: "Remember passwords for sites"
    Make sure that you not run Firefox in (permanent) [[Private Browsing]] mode.
    * You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
    * To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
    * Uncheck: [ ] "Permanent Private Browsing mode"

  • Database/Password Information not being saved in CMC

    Product:  CR Server XI R2.  Server is Windows Server 2003 operating system
    An issue just popped up today where the database info for a report in the CMC is not being saved.   I'm in the Process tab (database link) of the Report properties of the CMC and trying to enter Custom Database login information.
    The Driver is Oracle and the Server and Username fields are set correctly.  However, when setting the Password field, regardlesws of what length of a password I use, it defaults to 7 characters when showing on the screen and none of the reports run.  Even when I set the password to blank and set the password on the InfoView, the reportsw still error out.
    The error message when running the report is always
    Error Message:  The database logon information for this report is either incomplete or incorrect.
    We've been running these reports for weeks without any issue until today.  Are there any known issues with any recent MS patches or anything that could be causing this?  The only thing I noticed was a MS Patch (KB960714) that was installed on Friday night.  Uninstalled and rebooted and still no resolution.

    Hi Eric,
    I'm experiencing a similar problem.  Did you ever get this problem solved?
    Steve Teraji ~ 408-535-8339
    Technical Manager: Capital Project Management System (CPMS)
    Information Technology Dept.
    City of San Jose
    200 East Santa Clara Street, 5th Floor
    San José, CA 95113-1905

  • WRT160Nv3 port forwarding settings not being saved

    Hello there.
    I am using a WRT160Nv3 router and am having trouble getting port forwarding to work. 
    Specifically, my settings are not being saved properly. 
    I am trying to set up a server to run for Minecraft, and I have eliminated all issues save port forwarding.
    I open up the router's settings by going to 10.10.10.1 in my browser.  I go to "Single Port Forwarding."  I then choose a blank spot on the left and label the application (in this case, Minecraft), then I type in the ports I want to forward (minecraft uses 25565).  I check the box "Enabled."  Then I go down to the "Save Settings" button below and click it.
    This brings me to a mostly black screen with a white box in it, and big black letters saying "Settings are successful" and a button to click, labeled "continue."  I click this, and it returns me to the last page I was on (Single Port Forwarding).
    But here is the problem- that page is EXACTLY the same as when I began.  None of what I typed in or changed is actually saved on the screen o_0
    This definitely baffles me, as it seems as if I did nothing in first place.  I use the program whose port I wanted to forward and it still doesn't work, the error messages being the same as always. 
    So what is the matter here?  Why aren't my settings being saved properly?  Do I need to get a new router-this one is only a year old...
    Any ideas?
    PS- I also tried to do port range forwarding, and the same thing happens there too.

    hi there and welcome to the forums!
    try to clear your browsers' cache..and delete cookies then try again

  • HT4075 I tried the steps mentioned above but the changes are not being saved.

    I am not able to edit or merge PDF files. I followed the steps mentioned in the Mac support community but the changes are not being saved. Any solution to this?

    The link you posted gives be a 404 not found message. 
    The reason you're getting the repeat is because your site name is wilgenroos.nl and the first page of your site is wilgenroos. 
    The standard URL for domain names that are forwarded with the CNAME method is:
    http://www.domain_name.com/site_name/page_name.html.
    You can change the site and page names in iWeb to give you something more informative about the site and page.
    If you're publishing to a  3rd party server and want to get rid of the site name in the url and only have
    http://www.domian_name.com/page_name.html
    do the following:
    publish the site to a folder on your hard drive (already done)
    use Cyberduck to upload just the contents of your site folder to the root folder of your account on the server.
    You should delete the old site folder and files that are currently there beforehand.

  • File Options not being saved

    I appologize if this is the wrong forum, but I did a search and failed to find a related subject.
    When I click on File>Options then modify them the way I want to, then close Designer 2008 and reopen it, they're back to the default values.
    How can I retain my options even after closing designer and reopenning?
    Thanks much!

    What version of Crystal are you using?
    Are you a local PC Administrator also?
    Try right clicking on the crw32.exe and selecting Run As Administrator and then change them.
    Are you clicking the OK or Save button after making changes or simply closing the window using top right X button?
    Those options are saved to the registry, only reason they are not being saved is you don't have permission or some anti-virus software or Restore Point is writing the original settings back when you close CR.
    You may want to check with your IT people to see if they have pushed out some sort our Profile update that doesn't allow you to keep changes to the registry.
    After making the changes and you create a new report do you see the changes? Don't close the designer.
    Thank you
    Don
    Edited by: Don Williams on Apr 6, 2011 12:52 PM

  • Notes are not being Saved

    Recently upgraded to an iPhone 3G S from the first generation iPhone. Synced my phone and everything is fine, but when I use the Notes application the notes are not being saved. Anyone know of a way to fix this?

    Ensure that the "sync notes" box is checked in iTunes. Also note that the notes syncing feature doesn't work very well yet.
    If you have a note on both the phone and the computer, and you change/update the one on the phone, the next time you sync the computer version will over write the phone version.
    coop

Maybe you are looking for