BPM Studio 11g: New Process doesn't work

Hi,
Just downloaded JDeveloper 11.1.1.3 and extension "Oracle BPM Studio 11g".
I created a BPM application, a BPM project and in this project a try to make a new Process, but after new > BPM Tier > Process, nothing happens.
Am I missing something?
Thanks,
HJH

After installing the extension "Oracle SOA Composite Editor" extension it works...
I can create processes now.
Groeten,
HJH

Similar Messages

9800 new battery doesn't work

hello
I bought a new battery for my torch, cause the old one draines very quickly. so the new battery doesn't work, it has an X and the OS doesn't load. I've reinstaled 3 times the OS so it's not this problem. also I've charged the battery 1 day, with blackberry original charger.
I've tried every step I found on forums but with nou luck
any help please..
the battery it's new, it's the same as the original one, I don't know if it's original 100% but it's the same as the one I had before.

BrownSugar13 wrote:
I have been having the exact same problem. I replaced my battery and it still drains really quickly; 3 hours after a full charge and no use and the battery's drained.
I would also appreciate any advice.....
Hi and Welcome to the Community!
I recommend that you attempt to boot into Safe Mode:
KB17877 How to start a BlackBerry smartphone in Safe Mode
It may take you multiple attempts to get the ESC key sequence (press/release/hold) correct, so be patient. When successfully into Safe Mode, see what happens.
If the behavior ceases, then think carefully...what happened just before this behavior started? A new app? An update? A Theme? Something else? Think carefully as the smallest change could be causal...and attempt to undo whatever that was.
If the behavior continues in Safe Mode, then you should investigate more harsh remedies...WIPE, OS Reload, OS Update, BBSAK Wipe/Reload, "Bare Bones" diagnostic reload process, etc.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

New Version Doesn't Work On ESPN

All I get is the black box on most of espn.com. The problem started when I downloaded the new version. I can watch video on most sites; but the screen simply stays black, with no arrows or control bar at the bottom (play, volume, etc.) on espn.com and a couple of others. I've tried most of the "fixes" I've found, to no avail. I'm using FP version 10.3.181.34 and IE 8 with Windows 7 on a laptop. I've uninstalled and reinstalled, and it still doesn't work. I don't have any adblock software, and I've tried it with a pop-up blocker on and off, and it still doesn't work. I've tried it with hardware acceleration enabled and disabled, and it still doesn't work. I've increased and decreased my security settings to every available level and tried it, and it still doesn't work.
Hard to believe this is an improvement. Now I can't remember what my old version was, or I'd just go back to it... it worked with everything on every site.

Perhaps to somebody who spends most of their time on a computer, and makes it their business to know how to do all these things, it isn't jumping through hoops. For someone with no time and less patience for such tasks, and who expects a computer company and its hardware and software manufacturers to automatically provide working updates for the equipment they paid good money for, it is a burden. I have spent hours trying to either update that driver or find out why it's a bad idea to do so. I happen to believe them when they advise against it, and suggest it could have other negative effects on other aspects of the system. Not only do I believe it, it's happened to me on more than one occasion over the years; so I'm understandably hesitant to discard the advice of the manufacturer and give it a try on my own.
I updated all my drivers from the Dell driver update utility; and like the Intel site said, there isn't an updated one for my adapter. So, my choices appear to be, try the driver that isn't necessarily designed for my system, and hope for the best; or just uninstall the new version of FP, and reinstall the previous version that worked just fine. Because I'm not savvy enough to undo any potentially disastrous consequences from using the wrong driver, I'm leaning toward the latter resolution. I'm also having a tough time understanding how that single driver update is going to make my FP finally work for only the ESPN site. As I said, with the current driver, it works on virtually every other site, and the old version of FP, with the current driver, worked on every site, bar none. So, essentially I'd be installing a whole new driver that may or may not make my FP work on a single site. See what I'm getting at? It doesn't seem plausible that the driver was designed for the sole purpose of making one application work on a single site. Thanks for all the assistance; I appreciate everyone who devoted so much time to my issue.
Date: Sun, 7 Aug 2011 18:59:06 -0600
From: [email protected]
To: [email protected]
Subject: New Version Doesn't Work On ESPN
G8R8U2 wrote:having to jump through all these hoops...
Installing a simple driver update is "jumping though the hoops"...? I don't know why the Intel utility gave you that strange message; another easy way to update your outdated drivers is http://drivermax.com/ - the free version allows up to two driver downloads per day.
>

Macbook pro mid 2006 (Intel Core Duo) how can I install new OS ? I cannot update the 10.6.8 and new software doesn't work anymore

Macbook pro mid 2006 - how can I install new OS ? I cannot update the 10.6.8 version and new software doesn't work.

A Core Duo Mac can't be upgraded past 10.6.8.
(123371)

Can't access iTunes Store: New Safari doesn't work on my version of Mac!

Hey guys.
I'm a new owner of an iPhone, and i was just planning to purchase an app. I opened the itunes store tab on my iTunes... i have to download the newest version of Safari.
Okay. So i went and did that on the Mac Download site. I selected the Leopard option. Open up...
Halfway through the installation process, it tells me that my Version is doesn't work. It only works on Mac OS X 10. 5.8 ?!
What i am doing wrong?

Update your OSX to 10.5.8. It is free to update. It is suggested that you d/l the 'combo' update. This will make sure all required files are installed with the update.
Once that is done you should be able to install the version of Safari that you have d/l.
MJ

New Thunar doesn't work with Launchy, Chromium

After installing the new XFCE 4.8, the new Thunar now doesn't work with Launchy, or Chromium. I haven't tried any other GUI programs that launch the file manager (Gnome-Do, Docks etc), but the only way to launchy Thunar now is via the XFCE Panel, or the desktop (via XFCE programs themselves, in essence).
I've tested this, and opening a normal folder or file with Launchy means nothing happens. I'm guessing that Launchy is using Thunar here to launch the folder/file, and it's not working. For some reason though, I can launch in /usr/bin, which I'm guessing might be because Launchy doesn't use Thunar for that (only guesses though)? Meanwhile, Chromium downloads can't be opened, and the directory that contains the download can't be opened either. When I click the button that launches the download, or opens the directory containing the download, nothing happens.
I have tried reinstalling Launchy and Thunar, to no avail. I haven't tried downgrading Thunar, but that's a process I'd rather not go through.
Last edited by louis058 (2011-01-22 21:22:50)

Hi!
I don't know Launchy, but Chromium use xdg-open script for figure out which DE (Desktop Environment) is running and then, launch the properly file manager. With the new version of XFCE, this script doesn't detect XFCE and consider a generic DE. There are many solutions, but I just modified the xdg-open script (/usr/bin/xdg-open) and replaced the line:
elif xprop -root _DT_SAVE_MODE 2> /dev/null | grep ' = \"xfce4\"$' >/dev/null 2>&1; then DE=xfce;
by a more logical line:
elif [ "$DESKTOP_SESSION" = "xfce" ]; then DE=xfce;
. It isn't the best solution because will be a new update for xdg scripts, I guess.
For Launchy, you can launch it in a terminal and see if say some kind of error, like Chromium did.
Cheers!
Last edited by Versuchen (2011-01-30 16:43:25)

The open a new tab doesn't work

the button named : ''Open a new tab'' toes not work....when i pres it in does nothing....i just upgraded firefox and after that it doesn't work

That can a problem with the Ask<i></i>.com toolbar (Tools > Add-ons > Extensions)
See:
* [[Troubleshooting extensions and themes]]

"Get Info" - new shortcut doesn't work

I'm trying to create a more convenient keyboard shortcut for "Get Info" on iTunes, since I use it a lot. I want to replace Command-I with F19 on a full-size aluminum Apple keyboard.
Using the Application Shortcuts I entered F19 as the new "Get Info" shortcut, and iTunes duly shows F19 on the menu; Command-I does not work any longer. So far so good - the problem is that it doesn't work on iTunes. It works in the Finder, I can invoke the Info window of a file that way now, but neither an universal All Applications shortcut or an iTunes specific one will bring up the information of a track, which is what I want.
Any ideas? This seems to be a genuine bug, since the menu is updated properly - it just fails to work.

Yes, of course. I understand you're just trying to rule out the obvious first.

Leave to list-processing doesn't work

Hi 2 all!
I have a problem with LEAVE TO LIST-PROCESSING. I have developed a module pool (type M) and screen with the screen painter of type Normal. Now I want to go to the report from my screen with LEAVE TO LIST-PROCESSING, but it doesn't work. I am trying to do this when the button is pressed ( at my application status). The operation is performed but then the Init_screen_xxxx module is called again. Highly appreciate your help.

Hi Nata
Yes U can do it.
We go from module pool program to report program and vice-versa.
1. From report to screen (transaction)
       Call transaction
      Leave to list-processing and return to screen
2. From screen to list (report)
         we can write a report program for fuction key available in the screen.
          for example.
    case sy-ucomm.
      when 'fctcode'.
       select .......... from tabl   into ..
    write:/.........,
endcase.
reward if useful.

Clicking on "+" to open new tab doesn't work

Closeing firefox and restarting doesn't fix problem. Using firefox 3.6 on windows xp, I don't want to upgrade to newer version, since there doesn't not appear to be a navigation bar on the newer version.

Thank you for your response Cor-el. In fact the Ask.com toolbar had recently appeared on my browser, and I immediately turned it off since I didn't want it. It's frustrating how they can sneak these things in on us sometimes in spite of our attempts to keep so much clutter out. So this issue of the new tab button not working anymore in Firefox 3.6, even after turning off the Ask.com toolbar, it was finally enough to make me cave in to the constant badgering to upgrade to Firefox 4.0 ... Christ these endless upgrades are annoying ... Adobe Acrobat Reader has to be the worst offender in this category. Anyway, after installing Firefox 4.0, there was a terrible glitch, which was an error message box that popped up every single time I clicked on any link on any page. This was the last straw. One can only bear so much, then one is forced to look for new answers. I installed Google Chrome. Naturally the interface, look and feel are quite different from Firefox, but after less than 24 hours with Google Chrome, I am really liking it. It is truly a step up in the browsing experience it provides; so fast, and the way it handles bookmarks is so nice; even sophisticated. Oh, and about the relentless nagging upgrade messages from all manner of software that have caused us all so much suffering over the years, Google Chrome upgrades itself automatically behind the scenes without any need to bother you about such trifle maintenance issues. I recommend it to everyone. Step up to a new enlightened browsing experience People! Try Google Chrome and you'll be glad you did!

Outlook 2007 - Automatic processing doesn't work unless logged in

Hi guys,
I'm working with an equipment mailbox in an Exchange 2007 / Office 2007 and am having some difficulty getting it to work properly.
Basically, I've set the equipment mailbox up appropriately and have checked all three of the 'Resource Scheduling' tasks to automatically accept meeting requests and process cancellations as well as to decline conflicting and recurring meeting requests
As long as I am logged in 'as' the user account of the equipment mailbox (for example, 'PipetteBalance') meeting requests are processed automatically from my own account (and other users)
However, as soon as I log out of the PipetteBalance account the automation halts until I log back in to it again (and thus connect to Exchange via Outlook)
I've disabled cached exchange mode and have forced the 'AutoAccept' powershell cmdlet against the mailbox to no avail
Even adding the mailbox as a shared mailbox doesn't work. I have to log in as the account directly and have an 'active' connection with Exchange for the automation to work
This is the full list of properties set against the equipment mailbox:
AutomateProcessing : AutoUpdate
AllowConflicts : False
BookingWindowInDays : 180
MaximumDurationInMinutes : 1440
AllowRecurringMeetings : True
EnforceSchedulingHorizon : True
ScheduleOnlyDuringWorkHours : False
ConflictPercentageAllowed : 0
MaximumConflictInstances : 0
ForwardRequestsToDelegates : True
DeleteAttachments : True
DeleteComments : True
RemovePrivateProperty : True
DeleteSubject : True
DisableReminders : True
AddOrganizerToSubject : True
DeleteNonCalendarItems : True
TentativePendingApproval : True
EnableResponseDetails : True
OrganizerInfo : True
ResourceDelegates : {}
RequestOutOfPolicy :
AllRequestOutOfPolicy : False
BookInPolicy :
AllBookInPolicy : True
RequestInPolicy :
AllRequestInPolicy : False
AddAdditionalResponse : False
AdditionalResponse :
RemoveOldMeetingMessages : True
AddNewRequestsTentatively : True
ProcessExternalMeetingMessages : False
DefaultReminderTime : 15
RemoveForwardedMeetingNotifications : False
Is there something I may have overlooked or not set up properly?
Thanks,
Adam

Hi,
Please try to use Windows Search to search for words or phrases that you expect to find in email messages. In this way, we can determine if Outlook data is being indexed.
If no results were returned, please try to search other files (not Outlook emails) with Windows Search to check if the Windows search feature is broken. If so, we can try to reinstall the Windows search feature to check if it helps. To do this, please follow:
1. Go to Control Panel > Programs > Turn Windows features on or off.
2. Untick "Windows Search".
3. Press OK and wait until the installer is finished.
4. Reboot your computer.
5. Repeat steps 1-3 to enable it again.
Hope this helps.
Regards,
Steve Fan
TechNet Community Support

QuickTime movies cannot display properly, refresh doesn't work propely for html files on hard disk, opening a new tab doesn't work

Hi!
I have tried Firefox V4 (but have since reused V3.6.16). The following problems were found:
a. Cannot display the controls used for QuickTime movies.
b. The refresh button doesn't function at all if the html files reside on the hard disk. I do this because I need to test the appearance of the web page before uploading to the server.
This problem also exists for v3.6.14 to v3.6.16
c. When opening a new tab, it doesn't work. Instead, it will open another instance of the browser. By right, it has to open the web page on the same instance of the browser.
This is my feedback.
Thanks!!!!! :)

I had some advice to try recording QT audio and adding to the slide. Now, when recording to Quicktime, it does embed it, but in recording the presentation, it either doubles up the audio giving a strange echo or does the same thing if you ever edit the presentation.
The problem Keynote has is that the sound and image content are not locked together which causes out of sync errors. This is why many users choose video editing applications when using sound in the presentations, as they have both image and audio tracks to sync sound properly together.
Start a new presentation to remove the previous sound recording, Keynote is holding onto the other sound files.
Add the graphic items to each slide and one sound file to each slide for the voice over
1 - In Inspector > Transitions; use start transitions automatically and set each transitions delay to the duration of the individual sound file.
2 - In QT export, set Fixed Timing and delete the value in the duration box, QT will then use the custom timings for each individual slide.
This procedure does work exactly as needed, Iv used this for nearly 6 years using 4 different versions of Keynote.

Open new jframe doesn't work when put into jar

I cant get my program to open up a new frame. When i run my program from netbeans it works fine but when i put it into an executable jar it doesn't work. I have three frames, Main, About and SelectLanguage. From Main i can create a new instance of this from this window but it wont open either of the other two. This is the code i use for all three. Please help.
new About().show();please help.
clarkie

well, if that's the code you use for all three, and
they are different classes, maybe you should call the
right class name?
The code you posted isn't helpful, and I can't begin
to guess what you're doing wrong.nah, i use
new Main().show();
new About().show();
new SelectLanguage().show();also, i get this error:
java.lang.NoClassDefFoundError: org/netbeans/lib/awtextra/AbsoluteLayout
at About.initComponents(About.java:29)
at About.<init>(About.java:15)
at Main.aboutMenuItemActionPerformed(Main.java:409)
at Main.access$2200(Main.java:19)
at Main$22.actionPerformed(Main.java:344)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknow
n Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.AbstractButton.doClick(Unknown Source)
at javax.swing.plaf.basic.BasicMenuItemUI.doClick(Unknown Source)
at javax.swing.plaf.basic.BasicMenuItemUI$MouseInputHandler.mouseRelease
d(Unknown Source)
at java.awt.Component.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)

Update process doesn't work

Hello all,
I created the following PLSQL Trigger but it doesn't work as it should.
If there is a change in the colomn "stunden" in table cn_pl_std_peplanung, the trigger should write the attributes (pl_id, l_art_id, pe_id, idee_id, abt_id, version_id) from cn_pl_std_peplanung into the table cn_pl_aenderungen.
The problem is that this trigger doesn't just write the row where attribute "stunden" was changed into cn_pl_aenderungen, it writes all rows into cn_pl_aenderungen where the attributes (pl_id, l_art_id, pe_id, idee_id, abt_id, version_id) are matched. I just need the row where attribute "stunden" was changed. cn_pl_aenderungen is a table to log the changes made on cn_pl_peplanung.
I hope you understood the problem... :-)
create or replace trigger "CN_PL_STD_PEPLANUNG_T1"
AFTER
insert or update on "CN_PL_STD_PEPLANUNG"
for each row
DECLARE
pragma autonomous_transaction;
cursor c_peplanung(in_stunden number)
   is select pl_id, l_art_id, pe_id, idee_id, abt_id, version_id, stunden FROM cn_pl_std_peplanung
   WHERE stunden = in_stunden;
rec_plan c_peplanung%rowtype;
BEGIN
OPEN c_peplanung (:old.stunden);
LOOP
FETCH c_peplanung INTO rec_plan;
exit when c_peplanung%NOTFOUND OR c_peplanung%NOTFOUNd is Null;
IF rec_plan.stunden != :new.stunden THEN
INSERT INTO CN_PL_AENDERUNGEN (l_art_id, pe_id, idee_id, version_id, benutzer, datum)
VALUES
(rec_plan.l_art_id, rec_plan.pe_id, rec_plan.idee_id, rec_plan.version_id, v('APP_USER'), sysdate);
COMMIT;
END IF;
END LOOP;
CLOSE c_peplanung;
END;

All you need is just this
CREATE OR REPLACE TRIGGER CN_PL_STD_PEPLANUNG_T1 AFTER INSERT OR UPDATE ON CN_PL_STD_PEPLANUNG FOR EACH ROW
BEGIN
     IF :NEW.student != :OLD.student
     THEN
          INSERT INTO CN_PL_AENDERUNGEN (l_art_id, pe_id, idee_id, version_id, benutzer, datum)
               VALUES (:NEW.l_art_id, :NEW.pe_id, :NEW.idee_id, :NEW.version_id, v('APP_USER'), sysdate);
     END IF;
END;Don't use ATONOMOUS_TRANSACTION. You dont want to log if nothing happens to the Main table right? Think what happens if the main transaction rolls back.
Note: Code not tested.

Page level process doesn't works for tabular form.....

I am developing an application on inventory of an chemical factory.......
I have an master-detail form where detail table is in tabular form.......
I have an LOCATION1 AND QUANTITY1 COLUMN in detail table..........
I have location say...LT01A02 AND limit of each location to hold an quantity is .....say 1000.
I wrote an process for these but it doesn't work.......
declare
x NUMBER(6);
z number(6);
begin
selecT NVL(SUM(QUANTITY1),0) INTO x from RM_LOCATION1 where LOCATION1 = :P3_LOCATION1;
z := x;
if :P3_LOCATION1 LIKE'%1)' or :P3_LOCATION1 LIKE'%2)' then
if z > 1200 then
raise_application_error(-20101,'LOCATION YOU HAVE SELECTED IN LOCATION1 IS 1ST OR 2ND PALLETE ,WHICH CAN HAVE MAXIMUM 1200KG,PLEASE CHECK IT PHYSICALLY');
end if;
elsif :P3_LOCATION1 LIKE'%3)' or :P3_LOCATION1 LIKE'%4)' then
if z > 800 then
raise_application_error(-20101,'LOCATION YOU HAVE SELECTED IN LOCATION1 IS 3RD OR 4TH PALLETE ,WHICH CAN HAVE MAXIMUM 800KG,PLEASE CHECK IT PHYSICALLY');
end if;
elsif :P3_LOCATION1 LIKE'%5)' or :P3_LOCATION1 LIKE'%6)' then
if z > 750 then
raise_application_error(-20101,'LOCATION YOU HAVE SELECTED IN LOCATION1 IS 5TH OR 6TH PALLETE ,WHICH CAN HAVE MAXIMUM 750KG,PLEASE CHECK IT PHYSICALLY');
end if;
elsif :P3_LOCATION1 LIKE'%7)' or :P3_LOCATION1 LIKE'%8)' OR :P3_LOCATION1 LIKE'%9)' or :P3_LOCATION1 LIKE'%10)' OR :P3_LOCATION1 LIKE'%11)' or :P3_LOCATION1 LIKE'%12)' then
if z > 600 then
raise_application_error(-20101,'LOCATION YOU HAVE SELECTED IN LOCATION1 IS 7TH OR 8TH OR HIGHER PALLETE ,WHICH CAN HAVE MAXIMUM 600KG,PLEASE CHECK IT PHYSICALLY');
end if;
end if;
end;
I HAVE SEEN THAT APEX DOESN'T PICKS VALUE CALLED... _:P3_LOCATION1_*
NOW WHAT TO DO ,CAN ANY ONE HELP ME....HOW TO RUN THESE PROCESS......

Hi User XY,
tabular forms do not have Page Items. The values you entered in the tabular form are stored in arrays like APEX_APPLICATION.g_f01 to g_f50.
Here are some links you might find helpful: http://www.talkapex.com/2008/07/manually-creating-tabular-form.html
http://download.oracle.com/docs/cd/E23903_01/doc/doc.41/e21676/apex_app.htm#CHDICJDA
brgds,
Peter
Blog: http://www.oracle-and-apex.com
ApexLib: http://apexlib.oracleapex.info
BuilderPlugin: http://builderplugin.oracleapex.info
Work: http://www.click-click.at and http://www.wirsindapex.at

BPM Studio 11g: New Process doesn't work

Similar Messages

Maybe you are looking for