BPM task not getting created

I have modelled a BPM process and attached Webdynpro UI's to its human activities.
I am able to start the process from the Process Repository, but the tasks are not getting visible in the Uniiversal Worklist of the Task Principle Owner.
When I'm logging on with administrator id, and going to Manage Processes screen, I'm seeing the active task correctly highlighted.
Also, when I'm logging on with administrator id, and going to Manage Tasks screen, I'm not seeing any tasks being created.
What may be the problem?

There was a problem with setting the Locale in the BPM configuration wizard. After fixing it, the first human activity is getting created and task is assigned. When I'm completing the first human activity and submitting the form, task is not getting assigned to the user/principle owner of the second human activity.
When I open Manage Process, and see the history, I see the process status as Suspended and the following log:
15-Jun-2010 15:57:49 Task completed Task completed by BPEMUser, Operator Human interaction
15-Jun-2010 15:56:44 Event notification cannot be sent Event notification could not be sent to recipients <mail id removed> for task instance ID 35e69fcb-788e-11df-c7cd-02004c4f4f50. Problem: Cannot send e-mail because the e-mail session cannot be retrieved Human interaction
15-Jun-2010 15:56:43 Task created Task created Human interaction
No task created for second human activity.
What may be the problem now?

Similar Messages

BPM 7.2 Tasks not getting assigned to user UWL

Hi All,
I am on CE7.2 and downlaoded NWDS for the same.
I follwed Donka Dimitrova's article to create a BPM process (name, age) application. I had earlier tried it on CE 7.11 and it worked fine. But now on CE7.2 when I initiate the process from /nwa, the first user (user assigned to the very first task) doesnt get it in UWL. I .looked into nwa and It seems like the tasks itself are not getting created because there are no tasks under "Manage Tasks" option.
Is there some configuration missing.
Note: I have assigned tasks to users in the Process in IDE and EP-BPEM UWL configuration is done.
Prem

hi,
have you run the configuration wizard?
http://yourhost:port/nwa/cfg-wizard
there is a task for BPM. just execute it.
if you have already run the wizard, you can go to following place to check and make further change if required.
http://yourhost:port/nwa/sys-config
select "Applications" tab
put "bpembaseear" in the name filter, select that application in the result table
you will see the properties tab
if your locale is not there, you can fix now.
Best regards,
John

Outbound Delivery Not getting created

Hi Gurus,
Outbound Delivery Not getting created
there is a DESADV IDOC that is supposed to create inbound dely, do the GR then create Outbound delivery and shipment (all automized). But this is not happening.
There is workflow set up that is blocking this...Task no TS95000019 is responsible for passing the values. This will show up in the SAP inbox with error description. But i am able to see TS95000018 but TS95000019 is not showing up in the workflow log.
Can anyone let me know what setting is missing in workflow so that this task shows up and i can make the system create outboud delivery and shipment automatically
Please help
Sunil

Sunil
First check whether that particular task is active in your client.
For a task to get triggerred you need to activate the triggerring settings.
Use PFTC T-code, input your task as TS and ID as 95000019
click on view button
Then click on " Triggerring Events" tab page.
View whether your task 95000019 is active. Green light will appear next to it in the left most column. If it is grey or red, then you need to change it to green. Only then it will work. Once this gets triggerred, subsequently it will pass the message to your inbox with correct error message and then only create an outbound delivery.
Hope this will help you out !
Regards,
Syed Nasir

Integration with EWM-Inspection lot not getting created

Hi,
Inspection lot not getting created after GR is done.
The scenario is Storage location is connected to external warehouse management,so after the GR is done in the legacy system via interface it is updated in ECC.so while checking the material document inpection lot is not created.
Can anyone please tell me the necesaary check points and integeration steps between WM and QM in this case .
Thanks in advance.......

Hi,
Since you didn't say much, I assume you are creating stock into ECC via LSMW using 561 movement. Now to get inspection lot for these batches/ docs, you need to activate inspection type 05.
Go to material master QM view, assign and activate inspection type 05.
Additionally, create a respective inspection plan/ task list for the material(s) to carry out RR and get the consistent inspection lots.
ntn

Integration with QM-Inspection lot not getting creating

Hi ,
Inspection lot is not getting created after GR is posted.
Scenario:Storage location is connected to external warehouse management.
Can anyone please explain the necessary check points and Integration steps needed to be followed for inspection lot creation.

Hi,
Since you didn't say much, I assume you are creating stock into ECC via LSMW using 561 movement. Now to get inspection lot for these batches/ docs, you need to activate inspection type 05.
Go to material master QM view, assign and activate inspection type 05.
Additionally, create a respective inspection plan/ task list for the material(s) to carry out RR and get the consistent inspection lots.
ntn

Workitem not getting created

Hi,
I have build a workflow based on "QMSM" at event "COMPLETED". I have done the event linkage correctly and transported the customizing request in the client I want to test it in.
The workflow has been activated without error. Itu2019s working when I test it from development environment, that is, from workflow builder.
When I create a notification and complete the task, the event "COMPLETED" is getting triggered of "QMSM" object. In the event trace I could find out the green indicator against the event which means the workflow was recognized by event manager.
But there is no workitem getting created. Could you please help me finding out the problem behind it?
Why is workitem not getting created?
Event Trace result is:
Event Instance ID    577459
Object Type           QMSM
Object Key            0003000046080003
Event                    COMPLETED
Receiver type     WS99900010
Receiver FM         SWW_WI_CREATE_VIA_EVENT_IBF
RFC Destination   WORKFLOW_LOCAL_201

The problem is workflow is not getting triggered.
I had triggered the WF manually by executing the FM SWW_WI_CREATE_VIA_EVENT_IBF (from se 37 directly) which resulted in work item (WF instance) created. The WF error issue (Exception on ZFM) has been removed.
The process that i follow:
(1) I create a notification and add a task & complete the task. <--- This does not trigger WF (and this my problem)
(2) Event trace gives the things in GREEN. I double click the event trace record.
(3) I get the necessary parameters from event trace corresponding to the event (COMPLETED) of object type QMSM and execute the FM SWW_WI_CREATE_VIA_EVENT_IBF. This result in creation of a work item (triggering of work flow), In other word - A instance of WF is created that we can call the work item.
My problem is -> even after correct event linkage, why is workflow not getting triggered?
Could you please point out what would be going wrong?

Excise invoice should not get created without PGI

Hi,
I have a scenario where the billing document is being generated by the customer without PGI after creation of outbound delivery for exports. (This is as per customer's requirement - Copy control maintained in VTFL for the same - copying requirements 11 )
This creates a situation - excise invoice can be created without PGI - which creates problems for customer. This should not happen.
Customer wants a check during the excise invoice creation - excise invoice should not get created if PGI has not been done.
Kindly advise as to how this can be done.
Regards,
T Saravanan

Dear Saravanan
Two options are there
- in your existing routine itself, you can specify the control in such a way that unless the preceding document is PGId
- apply excise user exits like J_1I7_USEREXIT_EXCISE_BEF_SAVE to achieve the requirement.
thanks
G. Lakshmipathi

Invoice is not getting created in Order related billing

Dear all,
I am trying to do a Order related billing. After creating the order i am going to VF01 and selecting the billing type i have created and trying to create the invoice. I am getting the error "No billing documents were generated. See log" when i am checking the Log its showing now errors.
In case if my account determination procedure is wrong, system should allow me to create a Sales invoice and accounting document will not be generated. But in this case even the sales invoice is also not getting created.
Please suggest me if there are any configuration changes i need to do to overcome this problem.

Apart from the suggestion already given, also ensure that
the order is not showing in incomplete log
the order is not blocked for credit limit
You can also cross check in VF04 whether system is fetching that sale order. For information, once you execute VF04, by default, system will check only "Delivery related" check box. You have to manually select "Order related" check box.
G. Lakshmipathi

File not getting created in a different server

My requirement.
I have written a code in the BI system and now need to write an empty file (say a.done)in a directory /interfaces of PI system.
I wrote using open data set and close data set however the file (a.done) is not getting created in the PI system even though the directory /interfaces exist.
When I give any directory of that of BI system ,the file(a.done) is getting created i.e the file is getting created on the same server and not on the different server.
Is there any function module or any other way for the file to get generated in the PI system.
Please explain with an example.
Regards,
Vish

Try to use search FTP in se37 or checkout the below FM
CALL FUNCTION 'EPS_FTP_MPUT'
EXPORTING
    RFC_DESTINATION            =
*   FILE_MASK                  = ' '
*   LOCAL_DIRECTORY            = ' '
*   REMOTE_DIRECTORY           = ' '
*   OVERWRITE_MODE             = ' '
*   TEXT_MODE                  = ' '
*   TRANSMISSION_MONITOR       = 'X'
*   RECORDS_PER_TRANSFER       = 10
*   MONITOR_TITLE              =
*   MONITOR_TEXT1              =
*   MONITOR_TEXT2              =
*   PROGRESS_TEXT              =
* IMPORTING
*   LOCAL_DIRECTORY            =
*   REMOTE_DIRECTORY           =
*   LOCAL_SYSTEM_INFO          =
*   REMOTE_SYSTEM_INFO         =
* TABLES
*   FILE_LIST                  =
* EXCEPTIONS
*   CONNECTION_FAILED          = 1
*   INVALID_VERSION            = 2
*   INVALID_ARGUMENTS          = 3
*   GET_DIR_LIST_FAILED        = 4
*   FILE_TRANSFER_FAILED       = 5
*   STOPPED_BY_USER            = 6
*   OTHERS                     = 7
IF SY-SUBRC <> 0.
* Implement suitable error handling here
ENDIF.

Weblogic Domain not getting created in SOA Suite 11g R2

I have installed the components of SOA Suite 11g R2 (11.1.1.3) on a single Windows XP SP3 machine (32 bit) following recommended procedures. I tried to configure Weblogic server using Domain Configuration utility. After navigating hrough the wizard, no Weblogic server profile is getting created in the doamin folder. Even the WL Admin server is not getting created. The Domain Configuration utility did not throw any errors.
1) Is this problem related to Oracle repository for SOA suite 11g?
2) Can the repository schemas (Oracle) hold multiple weblogic SOA domain information?

Hi,
Weblogic servers directory do not gets created after domain creation or even managed server configuration. It will present itself only when you start the managed server for the first time, that is when it initializes all security attributes, diagnostic attributes (if configured) , etc..
Perform server start and then check if it gets created or not.
## rank answer if it is helpful ##
Thanks,
Ranjan

BP not getting created while creating employee

Hi,
When I Hire an employee a BP should be created for it. It used to happen earlier in the system but after we moved to another system this is not working. Can someone please let me know the necessary config for this?
I've the following settings:
HRALX ONUMB = 2
HRALX OSUBG = MD
The MD number range is from 90000000 to 9999999999. Should this number range be internal or external?
When I use the HR_SYNC_PERSON report for an employee I get the error as
"Determination of connections to object 'BP' of 'CP' '50000201' failed"
"Object of type 'US' with ID '1122' does not exist or is inconsistent"
"Determination of connections to object 'BP' of 'O' '50000101' failed" etc
Also I need to upload the employee master data using LSMW and BP does not get created with LSMW also? Is there some specific config while using LSMW?
Please help.

Whenever you are uploading employees using LSMW, you need to run program HR_SYNC_PERSON.
Pls refer to the following thread for further info:
Assignment: Business partner for person '50000029' is not unique
Regards,
Dilek

AUC Asset not getting created when Internal Order is created

Dear Experts,
While Creating the internal order ( Object Class - Investment Measure)
AuC (Asset Under Construction) not getting created automaticall . Note Investment profile is already there in the order.
Following steps below are configured -
1. Define the AuC Asset Class (with investment measure) - OAOA
2. Define the Asset Class u2013 for Main Asset - OAOA
3. Define Investment Profile - OITA
a. Assign the AuC Asset Class (Step-1) in the investment profile
4. Assign Investment Profile to Model Order - OITA
5. Define Order Type (Investment) - KOT2
a. Settlement Profile - OKO7
b. Maintain Allocation Structures - OKO6
Thanks
Sanjai

Hi Sreekanth,
What is the setting needed to create AUC Automatically when an Internal order is created ?
I have done all the setting, but still when I save Internal order neither AUC asset is getting created.
So I went to extras selected create AUC and it went to AS01, but when I came back (F3) from AS01 to Internal Order and save , Auc Asset is not getting captured in the settlement rule. I even tried to give manually the AUC Asset in the settlement rule, for which sys is not allowing in the settlement rule.
Any thoughts are highly appreciated
Advance Thanks
Sanjai

Accounting doucment not get created for Credit Memo

Hi
When creating a cancellation doucment(vf11) for credit memo accounting document not get created.While I go for analysis then it is determining the G/L account.But not getting created the accounting doucment.
When i select "Release to accounting" then it is giving a message like this:
"Automatic clearing of billing document 951
and canc. doc. 90000572 not poss." as informatiion first
and then later it is throwing an error message that "maintain correct number range"
While for the same material or earlier cancellation happened and accounting doucment get created.
Please help me out;How would i get this solved?
Thanks in advance

Hi,
You may also check for Number Range - Maintainance & Assignment.
T. Code: SNRO
Table/ View: RV_BELEG
Here, Mantain Number Range.
To Assign,
T. Code: SM30
T.Code: Bill_Num (or select if different in your case)
Assign No. range to your combination of Sales OrgDist.ChannelBill Type i.e. for Cancelled Billing Doc. Type
To Maintain Number Range for Accounting Documents,
T. Code: FBN1
Best Regards,
Amit

SRM PR is not getting created in ECC backend

Hello Experts,
We are running SRM 7.0 with SRM-MDM Catalog, we are using SRM for shopping. We do have PI 7.11 running in the Environment as well.
We are on ECC 6.0 with Ehp 4.0
Purchase Order:
However we can see the PO creating successfully using PI.
Question, in the SRM table (BBP_FUNCTION_MAP), we see the object type: BUS2012 for ERP 4.0 has adapter name: /SAPSRM/CL_SOA_ADPT_PO_CRT_ERP for when creating PO. Please see teh screen shot.
is this the reason that we need PI?
Purchase Requisition:
PR Creation is not working:
PR is not getting created in the ERP, PR uses Object type: BUS2105, Adpater CL_BBP_BS_ADAPTER_RQ_CRT_470 for ERP 4.0 System type, can you please tell me if the adapter is correct for ERP 4.0 system type?
I also have a question to ask:
1) Where did you see that PR/PO was send to PI System (PI1)? My understanding is that since ERP amd SRM are 2 ABAP Systems, why we cannot send the PR/PO directly to ERP system from SRM? Why do we need a middleware(PI) in between for this process? We should be able to USE BAPI function to do it correct?
Please advice.
Thanks
Kumar

yes, i could see a PR number with all this additional details as below.
Table   BBP_PDBEI
CLIENT                       453                                                              Client
GUID                         4CAEFA58EB9D005CE1008000AC1C2031                                 Globally Unique identifier
BE_LOG_SYSTEM                QA1400                                                           Logical System of Logistics Backend
BE_OBJ_ITEM                                                                                Follow-On Object Item in Back-End System
BE_OBJECT_TYPE               BUS2105                                                          Follow-On Document Object Type in Back-End System
BE_OBJECT_ID                 2000000167                                                       Follow-On Document Object ID in Back-End System
BE_REFOBJ_TYPE                                                                                Reference Object Type in Back-End System
BE_REFOBJ                                                                                Reference Object in Back-End System
BE_REFOBJ_ITEM                                                                                Reference Object Item in Back-End System
BE_REFOBJ_SBITM                                                                               Reference Object Sub-Position in Backend System
BE_REFOBJ_TYPE2                                                                               Reference Object Type in Back-End System
BE_REFOBJ2                                                                                Reference Object in Back-End System
BE_REFOBJ_ITEM2                                                                               Reference Object Item in Back-End System
BE_REFOBJ_FYEAR2             0000                                                             Reference Document Object - Fiscal Year in Back-End System
BE_STGE_LOC                                                                                Storage location
BE_PLANT                     2016                                                             Plant
BE_BATCH                                                                                Batch Number
BE_VAL_TYPE                                                                                Valuation type
BE_MOVE_REAS                 0000                                                             Reason for Movement
BE_EXPERYDATE                00000000                                                         Shelf Life Expiration Date
BE_PUR_GROUP                 206                                                              Purchasing group
BE_PUR_ORG                   2000                                                             Purchasing organization
BE_CO_CODE                   2000                                                             Company Code
BE_DOC_TYPE                  CLRQ                                                             Purchase Requisition Document Type
BE_ACCREQUIRED                                                                                Account Assignment for Logical Backend Required
BE_SP_STK_IND                                                                                Key for Special Stock Section
BE_INFO_REC                                                                                Number of purchasing info record
BE_MOVE_TYPE                 201                                                              Movement type (inventory management)
BE_PACKNO                    0000000000                                                       Package number
BE_INTROW                    0000000000                                                       Internal line number for limits
BE_ITEM_TEXT                                                                                Short Text of a Service Purchase Order Item
BE_PO_PRICE                  1                                                                Price from Backend
BE_UNLOAD_PT                 200                                                              Unloading Point in Backend
BE_DEL_IND                                                                                Deletion Indicator in Backend Documents
BE_TRACKING_NO                                                                                Requirement Tracking Number
BE_COND_TYPE                                                                                Condition Key
BE_COND_STEP                 000                                                              Level Number
BE_COND_COUNTER              00                                                               Condition counter

WBS Elements not getting created in ECC Project System from CRM 7.0

Dear all,
We are trying to integrate SAP CRM 7.0 with SAP ECC-PS module. The objective is to bring in the marketing plan and elements data from the CRM system, and to create the corresponding WBS in project system. We have done most of the configuration as recommended by SAP in both the systems, and we see that the BDOCS are getting generated and sent to the ECC system. The following steps have been successfully completed:
1.       Set up the RFC connections between the two systems
2.       Selected the connection type as Middleware in CRM system.
3.       Installed the cProject Add on in CRM box.
4.       Created a project scenario (with project and network profiles) in the PS system and assigned the same in the CRM system.
5.       The Project Scenario in PS config has the same name as the Project Type in CRM config.
6.       Created and released the campaign ids being created in the CRM system.
As already mentioned, we can see that the BDOCS are coming to the ECC system and are getting stored in BDOC_TRACK table. However the issue is that the corresponding WBS elements are not getting generated in the ECC system. Is there anything that that we are missing in the ECC box which would trigger the WBS element creation?
Request you all to share your inputs which would be immensely beneficial for us in achieving this integration.
Thanks and Kind Regards,
Aditya Shrivastava

Hello Aditya,
We too are facing this issue.. if you have resolved the issue could you please let us know the solution ?
Some inputs related to our system,
We have upgrade from CRM 4.0 to CRM 7.0 SP07 and R/3 backend system is on 4.7 SP27, earlier we have completed the upgrade on sandbox without any issues which was upgrade to CRM 7.0 SP04 but with SP07 we are facing the problem of WBS Element not getting created in R/3.
Your help is highly appreciated.
Thanks & Regards,
Sumukh Kapoor.

BPM task not getting created

Similar Messages

Maybe you are looking for