BPM ----to---Webservice scenario

Hi all,
I am doing BPM -
to---Webservice(target) scenario,the webservice URL would be https://116.50.64.33:443/RRIntegration/BusinessUseCases/StarterServices/BANKSTATEMENT_UPLOAD_STARTER.
Here my problem is ,if i send the data to webservice is receiving the data on on port 80 instead of port 443.
For this shall we need to do any configuration at PI level or basis level
Thanks in advance,
AVR

Hello,
I am trying to implement one pi scenario :
File -> file adapter -> ccBPM -> soap receiver adapter -> web service request -> web service response -> ccBPM -> output file adapter.
The web service that I call works file from wsnavigator. I have created all the design and configuration objects
needed for the scenario.
I place a file with following contents:
<?xml version="1.0" encoding="utf-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SOAP-ENV:Body>
<pns:GetSetNameWS xmlns:pns="urn:file2soap2fileWSVi">
<pns:name1>ajeet</pns:name1>
<pns:name2>phadnis</pns:name2>
</pns:GetSetNameWS>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
When I look at the process monitor I get this:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error SOAP:mustUnderstand="" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">CX_RD_PLSRV</SAP:Code>
<SAP:P1>Problem while determining receivers using interface mapping: No operation with XML root tag http://schemas.xmlsoap.org/soap/envelope/.Envelope exists.</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Error when determining the receiver: Problem while determining receivers using interface mapping: No operation with XML root tag http://schemas.xmlsoap.org/soap/envelope/.Envelope exists. Problem while determining receivers using interface mapping: No operation with XML root tag http://schemas.xmlsoap.org/soap/envelope/.Envelope exists. No operation with XML root tag http://schemas.xmlsoap.org/soap/envelope/.Envelope exists.</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have no clue about this error. Can you help me with this ?
If yes I can send you more details, if you liked 
Hoping to get help from you,
Cheers,
Ajeet Phadnis

Similar Messages

BPM webservice scenario

Hi All,
Could you please provide some sample BPM webservice scenario for the Approval process?
Actually, don't want to get top to bottom info. for this request, prefer to have just layout info.
Regards
Sara

Hi Sara!
There was a document written by SAP describing exactly this process - XI (BPM) + approve in R/3. Try to find it on SDN... If you're not succesful and want REALLY to have it I have it on my pers NB somewhere, so in this case provide pls yr email adress.
regards,
P.

Can I include 2 diff strctures in d same wsdl file in a webservice scenario

Hii all,
We are using webservice to webservice scenario in which sender shld b able to send all the new rquest to the target and receive any updations or modifications from the receiver.
Few fields are different for request and modification structures. so i created 2 diff structures for source and target.
can any one suggest me who can i use single wsdl file for both the msgs( Creation and modifications) mean how to implement multi maping ( 1 to many) using wsdl
Regards
Anu

A simple way to include the 2 structures in one WSDL would be to create a combined structure similar to the one below:
<RequestPackage> (1 occurrence)
   <Request> (0 to n occurrence)
      <Create> (0 to 1 occurrence)
         ... Create Fields u2026
      </Create>
      <Modify> (0 to 1 occurrence)
         u2026 Modify Fields u2026
      </Modify>
   </Request>
</RequestPackage>
This is more complex than using 2 wsdls but it would allow you to easily send multiple create and modify records in the same message.
- Craig

BPM n:1 scenario(file-file). everything is fine.output file not genarating

Hi friends,
I am doing a BPM N:1 scenario,
1.my ip(integration process) is at status 0 in sxi_cache.
2.No problem with SWF_XI_CUSTOMIZING.
3.after running my 2 commumication channels for 2 input files the flag is correct(black n white) in MONI.
But when i see the file in destination directory , it's not appearing there.
Any suggestions???

Hello,
Check all the queues SM58, SMQ1, SMQ2. Check the RWB for the messages on the adapter engine.
Also, you will have to check the workflow log. Go thru the following steps.
Scroll the successful message in the monitor to the right to see columns like Inbound or Outbound. You will see a value PE in one of the column. On clicking it, you will go into the workflow log. Then, goto the technical details. You will see all the steps configured in the BPM and various tabs below which gives minute details about each step. Look for errors in any of the step bu going thru the details.
There might be the case that the mapping itself might have gone into error. Or some step inside the BPE is in a waiting mode.
Regards,
Akshay

Error in SXMB_MONI for HTML to Webservice Scenario

Hi Experts,
I am facing following error Error in SXMB_MONI for HTML to Webservice Scenario
"Runtime exception occurred during application mapping com/sap/xi/tf/_MM_EmailRequest_To_ValidateEmail_; com.sap.aii.utilxi.misc.api.BaseRuntimeException:Content is not allowed in prolog."
Only one field is used i.e. email address and mapped properly in IR but still the error is persisting, Please suggest some way out.
Regards,
Nitin

Hi,
Mapping internall follows the SAX parser. Please check if you are trying to process the data of large size.
generally while parsing the large data this exception get raised. Even though there is just one field, what is the data size you are trying to pass.
Thanks
Swarup

Rfc to webservices scenario

hi,
i am taking 2 FM's in rfc side and i am taking external definition in receiverside i.e in soap side
rfc to webservices scenario
could any one help me immediately.
urs
suman

HI
Refer this
RFC -> XI -> WebService - A Complete Walkthrough (Part 1)
RFC -> XI -> WebService - A Complete Walkthrough (Part 2)
Steps
Import the RFC meta data to PI
Import the WSDL to PI
Create MI for RFC -outbound Sync (if response is involved else Async)
Create MI for WSDL service you want type Inbound Sync (If response involved)
Create MM(external definition and RFC), IM for these
Create Sender RFC adapters with SA
Create Receiver SOAP and do necessary pipline steps
Thats it
Thanks
Gaurav

BPM and Webservices

I'm new in using of BPM and Webservices
Netweaver version is CE 7.2 SPS03
I use Web dynpro to write a ap to trigger web service for start BPM process.
It took about 40 sec for waiting response when i trigger the synchronous web service.
And i get a exception "DEFAULT_WS_METADATA_DEST. The server response timed out"
But i check my process status, it is running ok.
When I tested for asynchronous web service ,I get quick response for it
Does this version only support asynchronous web service?
Do I need another configuration to use synchronous web service?

Hi
For process start you need a asynchronus web service (no output / response).
Also, you can use a synchronus one if you are aware of this: If you use a synchron web service, you have to model a parallel split at the beginning of the process and finishing one of both tokens directly. This way, a response is generated when the first token hits the end event and the rest of the process is handled asynchronus.

Configuration Scenario for BPM Using Integration Scenario

hi All,
I Have an Scenario where i am using BPM. Most of the blog tells about manually creating all Configuration objects. I had created an Integration Scenario for this scenario by referring to the earlier threads available for same.
Hoe to Create Integration Scenario for BPM Scenario
Integration Scenario in BPM and few more.
My IS looks like
Sender App Component - Integration Process - Receiver App Component
Now when i am trying to create Configuration scenario for same using model configurator, i am getting Model as "Not Configurable"
And when i click "Configurability Check" Button, i am getting below as status:
Component view IS_POC_BPM: Connection from receivePayload to getABSPayload does not have an inbound service interface
Component view IS_POC_BPM : Connection from sendABSPayload to getPayload has no outbound interface
getABSPayload and sendABSPayload are actions for Abstract interfaces.
IS_POC_BPM is the Integration Process Name.
Also in Integration Scenario, when i create connection between sender action to BPM action there is no inbound interface coming. And viceversa.
Please help me in identifying if i am doing any thing wrong in creating this scenario.
Is it possible to create Configuration Scenario for BPM Using Integration Scenario?
Thanks,
Mayank
Edited by: Mayank Gupta on Apr 21, 2010 6:35 AM

I think you shoudl refer the available Integration Scenarios created for BPMs in IR --> SAP BASIS --> http://sap.com/xi/XI/System/Patterns
Sender template will have the Action with Outbound Service Interface and then in the BPM Template the action will have Inbound Interface.....then within the BPM itself this inbound will be mapped to Action with Abstract Interface
may be after looking the Integration scenarios you will get more idea
Regards,
Abhishek.

BPM Collect Pattern Scenario :Container is empty for the loop at run time

Hi Friends,
I am working on BPM Collect Pattern Scenario after looking into the example delivered by SAP in namespace http://sap.com/xi/XI/System/Patterns and IP name as BpmPatternCollectPayload.
After configuring the same and when it is run, I see strange behaviour as illustrated below
1. Container step is empty and not able to see the counter for which it needs to be incremented at runtime
2. I understand that Loop should start and it need to be incremented as when we get a new message into the same BPM.
But I observe that it is creating a new message and loop never stops and completes the condition and comes out to go to next step.
Request your help.
Regards,
Hussain

Hi,
define or declare a variable with name counter and type as integer in Container where you define abstarct variables...
Thanks,
Madhu

Hi, In a IDOC --- XI(BPM)--- SOAP Sync Scenario failrure.

Hi, In an IDOC ->XI(BPM)->SOAP Sync Scenario I observed recently messages are failing in SXMB_MONI with an error as:
com.sap.aii.af.ra.ms.api.DeliveryException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: System.Web.Services.Protocols.SoapException: Server did not recognize the value of HTTP Header SOAPAction: http://172.16.209.162/esdryrun/ContractData_Push. at System.Web.Services.Protocols.Soap11ServerProtocolHelper.RouteRequest() at System.Web.Services.Protocols.SoapServerProtocol.Initialize() at System.Web.Services.Protocols.ServerProtocol.SetContext(Type type, HttpContext context, HttpRequest request, HttpResponse response) at System.Web.Services.Protocols.ServerProtocolFactory.Create(Type type, HttpContext context, HttpRequest request, HttpResponse response, Boolean& abortProcessing)
friends, could u plz help on this.
Thanks,
satya.

Hello,
This indicates a configuration issue with this SOAP receiver adapter. Please check the on line help for the configuration of the SOAP adapter (the link is below). Please set the indicator in the "SOAP Action" field.
Configuring the Receiver SOAP Adapter
http://help.sap.com/saphelp_nw70/helpdata/EN/29/5bd93f130f9215e10000000a155106/frameset.htm
(Below is the extract from the link)
SOAP Action
Specify the SOAP action. The action specifies the value for the
SOAPAction in Web service messages; set the indicator.
Regards,
Sarah

How to Instantiate Oracle BPM Process Webservice from the OSB

Hi,
In our project we have one requirement i.e Instantiate Oracle BPM Process Webservice from the OSB.After register BPM service in to OSB I am creating one Message flow to instantiate BPM Process.
first call to startSession Operation, then use response of startSession operation is used as reqest for BPM process operation.
Can u tell me how do we use response of startSession operation to the request of BPM process.
Thanks in Advance.

An easier way of instantiating a BPM process via a WS call is to set the authentication type to 'Username Token Profile' on your web service operation in BPM studio and then redeploy it. If you use this type of security on your bpm process operations you can start the process in one call instead of having to get a session first and then starting the process.
Once you've updating the process, re-register the new process WSDL and business service with OSB (or import it manually) and you can just call the start process operation in one request (passing a username and password using the WS-UsernameToken method) without having to get a session first.
Hope this all make sense,
Mike.

BPM in Integration Scenario

Hi Everybody,
I have some queries on BPM in Integration Scenario.
In the BPM i will be using
1.A Receive step to collect the data from database.
2.A synchronous send step to send a request and get the response from the same database.
3.Finally a send step to send the data out of BPM to another system.
Somebody can guide me about how to incorporate BPM in the integration scenario(how many actions i need to create for the BPM).
Expecting your replies.
Thanks,
Zabiulla

Hey Mohammed,
you'll have 3 application components:
1. database;
2. BPM;
3. the 3rd system.
The actions you need are:
1. sending action (outbound async interface) @ database;
2. receiving action (abstract async interface) @ bpm;
3. sending action (abstract sync interface) @ bpm;
4. receiving action (inbound sync interface) @ database;
5. sending action (abstract async interface) @ bpm;
6. receiving action (inbound async interface) @ 3rd system.
The connections you need are:
1. async connection between database & BPM;
2. sync connection between BPM & database;
3. async connection between BPM & 3rd system.
Regards,
Henrique.

Want to create IDoc to Webservice Scenario

Hi All,
I wan to do Idoc to Web Service Scenario, I have already done Idoc to File Scenario and I have mapped the file of both end in ESR and I am done with Configuration in Integration Directory.
Now If I want to convert it to IDoc to Web Service Scenario, what all steps need to be done. and also want to know that How we can access and Send the files from Web Service to PI 7.1. As such web service is not available need to create the same also.
Can anyone provide How to guide on this scenario.
Regards,
Nitin Patil
Edited by: Nitin Patil on Dec 19, 2008 2:44 PM

Hey,
     as you have familiar with idoc to file, the idoc to webservice scenario is not different.
     You need to do the ALE settings on the R\3 side. import the Idoc in XI.
     Now for mapping purpose you need the source and the target structure.
     In case of webservice you need to import the WSLD (unlike the file in which you wold have created the data type and message type)
In order to import the WSLD, you need to do following things.
Ou require NWDS and the following settings needs to be done
Deployement of Web Services:-
Step 1)
     Goto Windows->Open Perspective->J2EE development.
Step 2)
     Goto File->new->Ejb module(give project name).
Step 3)
     Right Click on the <project name> eg. work_ejb select new->Ejb.
Step 4)
     Give an appropriate EJB name and default package (eg. com.xxx.yyy).
     Also select stateless Ejb.
     Click next then next and then next.
Step 5)
     Add method with an appropriate name.
     Mention the return type and also assign the required parameters.
     Logic is written in the EJB module bean.
Step 6)
     Right click on the <project name> and build.
     Creates .jar
Step 7)
     Goto File->new->Enterprise Application project(to create EAR)
Step 8)
     Give project name, assign EJB and build.
     Creates EAR.
Step 9)
     Right Click on the EJB.
     Goto new->Web services.
     Specify name of the web service.
     Specify EAR in the WEB service.
Step 10)
     Build EAR.
     Build Ejb.
Step 11)
     Goto Windows->Prefrences->SAP j2EE engine.
     Give the message server host name.
Step 12)
     Right Click on EAR and deploy.
Step 13)
     Goto-> http://<host name>:<port no.>/index.
Step 14)
     Choose the web service name,test it and download it(default WSDL).
Step 15)
     Import port(WSDL) in External definition of SAP PI.
After you import the wsld, you need to follow the same procedure as idoc to file.
regards,
Milan

RFC - XI - WEBSERVICES scenario - Where to create RFC Destination

Hi Experts
For my RFC - XI - WEBSERVICES scenario, I have to create one TCP/IP RFC destination on R/3 system with the following details
RFC Destination Name    : XXXX
Connection Type            : T (TCP/IP)
Activation Type              : u201CRegistered Server Programu201D
Program ID                      : YYYY
Gateway Host                : R/3 Details ..??
Gateway Service           : R/3 Details ..??
My Function Module (Remote-Enabled) - u201CZZZZu201D is defined in R/3 System.
This Function Module should be communicated with the target system i.e. NW XI system
As per the Note from SAP Help: To be able to communicate using RFC, you need to define the target systems as RFC destinations in the sending system(R/3)
Target system u2013 XI Server
Sending system u2013 R/3 System
Are my details provided are good enough as per my explanation? Please guide me in this regard.
QUESTION : Where exactly do I need to create the RFC Destination(SM59)? on R/3 side or on XI side?

Refer the following link-
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3414700)ID1636235450DB01012070359836134304End?blog=/pub/wlg/1438
what are the inputs should be given to Gateway Host and Gateway Service while creating RFC Destination??
Open transaction SMGW on the R/3 system and choose
Goto -> Parameters -> Display. Beneath Attributes there will be the
entries 'gateway hostname' and 'gateway service'.#

XI Contents : Error Handling : Syncronous Proxy - WebService Scenario

Hi,
I am working on Syncronous : Proxy <-> XI <-> WebService Scenario.
I am using Standard XI Contents from XI and SAP side.
Meaning : All the design objects like Message Interface / Message Types / Data Types etc are NOT created by me, but I am using from Standard XI Contents EA-HR 600. I did all the Configuration of the Scenario by using these Design objects.
In short , I can not change any of the Design object as it belongs to SAP.
Now, the scenario works fine. But I need to cater for Error handling.
Any suggestion.
I can not create fault messages as it is SAP's objects.
Thanks.
Dk

Thanks for suggestions.
Now my comment on these suggestions:
Option1 by Bhavesh. Copy Contents to my namespsce : I can do that, but here I need to tell you something. I have used Contents (Design Objects) and I didnt have to even create or activate any proxy ( I was amzed to see that ). Now, coping all the contents to my namespace will give me flexibility to add Fault Message (which is currently not avilable in standard content). but..but..I will have to create and generate / activate the proxy. ( Am I right?). Then where should I use this proxy? How my application will talk to this proxy? (I am not sure if I made my point clear). Currently I dont have to worry about communication between this HR application with standard Proxy ( which belongs to standard contents).
Option2 by Jai. Webservice changes : Webservice is not developed by me. I am consuming it. but I can ask this vendor who is WebService owner to change his webservice to suit my needs. But it wont solve the problem as I do not have Fault message at XI side.
I can consider Option1 by Bhavesh, if the proxy problem is solved.
Thanks,
DK

BPM ----to---Webservice scenario

Similar Messages

Maybe you are looking for