BPM - track and send message based on input message

Hi All,
I have simple bpm to receive two files, merge and create output file.
Start -- Receive1 -- Receive2 -- Transformation -- Send -- Stop.
Scenario is working good as expected, now I need to build the controls. I setup a timeout parameter for 1 min for the block. If File1 is available but NOT File2, after 1 min, bpm is terminated, but I need to send an email stating that File2 doesn't exist at the input folder. How do I track the message2 in BPM whether it exists or not and send an email.
Thanks for your help.
thanks..Hari

Define a deadline block and set the tims out to 1 min.
Put one control step in your deadline block, to trigger exception:
In your exception branch: put a control step to trigger a alert, then another control step to terminate the process.
Regards.
Liang

Similar Messages

Bpm,COLLECT AND SEND MESSAGES

Hi all,
My scenario is as follows:
Get user ids from SAP(receive step) ->
Make syncronous call to get Roles from SAP(send sync) ->
Append response message to message list ->
Make syncronous call to get roles from SRM(send sync) ->
Append response message to message list(both are same MT) ->
Transform message list to new message ->
Send message with to external system
The problem is that only the roles from the first message are sent to the external system. It did not map and send the second message. What do you have to do to get both messages sent in the same send step? Is it possible?
I set the message occurs for the source to 0...unbounded and the message occurance for the target to 1 per the pattern for both the message map and the message interface.
Regards,
chris

Sorry
Wrong place to post this question
regards.

ı wanna delete my purcahe but it did hide and where is the hidding ı wanna delete my purchase please because I am not looking a few purchase (dowloaded at the apple store) help me and send message to my email thank you have good work.

ı wanna delete my purchase but it did hide and where is the hidding ı wanna delete my purchase please because I am not looking a few purchase (dowloaded at the apple store) help me and send message to my email thank you have good work.

what?

Enter and send message from portal

Hi
I am able to allow user to enter rejection reasons using task TS20000139 (Enter and Send Message) when the user clicks the Reject button in SAP Gui. However when the user clicks Reject from the portal, the Enter and Send Message does not appear immediately. Instead it appears as a new task in the portal. Is there a way for the Enter and Send Message to appear immediately in the portal when the user clicks on the Reject button ?

Hi Ronaldo,
Also, as Jocelyn says...
Hi folks,
Actually advance with dialog will work under some specific scenarios from the UWL.
1. If you are launching work items using WinGUI.
2. If you are launching work items using SAPGUI for HTML and are on a high enough release .
In other words, it depends on the launch mechanism - not the UWL.
Try checking the launch mechanisms.
Regards
Raja Sekhar

Way to receive and send Messages.......................

Hello All!
Is there a Way to receive and send Messages with attachments From Forms 6i?
Could you give us one actual example i really cant understand this how to do this through forms?
Arona

What kind of messages? If you are referring to email, then if you search this forum, you will find many threads. Here are a few:
Sending email with a pdf attachment
email attachment
Re: CLIENT_OLE2 and Outlook to send an email..

Why mine iphone 5c cannot normal receive message and send message to another phone? I also cannot receive any message form Digi Centre~ I am form malaysia~

Why mine iphone 5c cannot normal receive message and send message to another phone? I also cannot receive any message form Digi Centre~ I am form malaysia~

Sorry, forgot to add this and I can't find the edit button.
-I am using build: 9A406
-One funny thing I want to add too: when I put the iPhone in the Apple dock and connect it with my PC, I open iTunes and select my phone. There you can see the build, software version,.. But after telephonenumber it says N/A: not applicable.. Something I only just noticed. I'm pretty sure my number was displayed back in Nov. when I first got my iPhone 4S.
And the very last thing: Most of the time I have a very good signal, 4 out of 5 bars. It is only rarely that I have only 1 or 0 bars.

I'm unable to use Fiverr with Firefox. Last year I was able to order Fiverr gigs and send messages inside Fiverr but for the last 3 weeks I've been unable to.

I'm unable to use Fiverr.com with Firefox. Last year I was able to order Fiverr gigs and send messages but for the last 3 weeks I've been unable to do either. I can login to Fiverr but I'm unable to use the service.
I'm using Windows 7.

Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!

After Clicking Rejection(Enter and send message from portal )

Hi
I am able to allow user to enter rejection reasons using task TS20000139 (Enter and Send Message) when the user clicks the Reject button in SAP Gui. However when the user clicks Reject from the portal, the Enter and Send Message does not appear immediately. Instead it appears as a new task in the portal. Is there a way for the Enter and Send Message to appear immediately in the portal when the user clicks on the Reject button or any other task is there for Enter and Send Message supporting SAP portal...
please let me know the solutions...
Thanks
ram

Ram,
the Advanced with Dialog works fine only in certain scenarios, as Jocelyn mentioned in the following thread. pl go thru' this.
Extended Notification-Submethods and advance with dialog not supported...
COming to your requirement, if you want to provide a box for the user to enter Rejection reason on the portal side, you can use the User decision Actiion Handlers as given in the below link. It is very simple and fast implementaion.
I have done this recently, so if you need more details, let me know.
But go thru' the following help.sap link on ACtion Handlers.
http://help.sap.com/saphelp_nw2004s/helpdata/en/7a/df014b037141ca9afc6433ed42b519/frameset.htm
Hope this helps.
Regards,
venu

Want to find a fitness GPS app that will allow you to receive and send messages and calls while running the app

I love my blackberry 8900 and have found some cool fitness gps apps that track my distance, etc. The problem I have is I can't figure out how to access incoming messages or how to send a text message while keeping the app active. There are pause buttons on the ones I've used, but if I try to get out of the app screen it will log me off the workout completely. Now granted, I don't do a lot of texting during my workouts (cycling) but still - would be nice to be able to pause it and maybe send something liek "home in a few mins " then continue on with the same workout.

I figured it out - I programmed my left side button to go straight to my IM program. I can send and receive messages and go back to my workout without stopping it

I bought a used i pod 4 for my daughter and it does not have the message icon on it: how can i put the icon on the i pod and get it receive and send messages

I bought a used i pod 4 for my daughter and it does not have the message icon on it ( not even in settings) how can I get the message icon on it so it can receive and send messages

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

See all room and send message

hello, first sorry for my english.
i' m developing a multyplayer games whith multi-rooms
application.onAppStart = function(){
application.player_so = SharedObject.get("player_so",
false);
application.nextId = 0;
application.onConnect = function(newClient,name){
application.nextId++
newClient.id = application.nextId
application.player_so.setPrope rty(newClient.name, name);
application.acceptConnection(newClient);
newClient.sendMessage = function(testo) { ;
for(var c=0; c<application.clients.length;c++) { ; ;
application.clients[c].call("sendMessage", null,"hello i'm:
"+name);
ok.. i have 10 rooms .. then the client
var client_nc:NetConnection= new NetConnection();
client_nc.connect("rtmp:/myapplication/room1","ciao");
// i create 10 room
client_nc.onStatus = function(info) {
client_nc.sendMessage = function(msg) {
dbg_txt.text +="Debug: "+ msg+"\n";
dbg_txt.scroll += 1;
dbg_txt.scroll = dbg_txt.maxscroll;
mybutton.onRelease= function(){
_root.client_nc.call("sendMessage", null,
_root.testo_txt.text );
how can i send a message for all client?
if i send a message this message is received only clients of
a determinate room, i want send message for client of all
room

As I said the problem is in delta pull mechanism. Talk to your Basis or EP guy and check the following link
http://help.sap.com/erp2005_ehp_03/helpdata/EN/eb/101fa0a53244deb955f6f91929e400/content.htm
Regards, IA

HT4061 How do you change your phone number than is in your iPad and replace it with right one to receive and send messages?

How do you change your phone number in your iPad messages and replace it with another number. In order to send and receive messages to the correct phone number?

It's best to use an email address on the iPad.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
 Cheers, Tom

Bridge NOT able to connect to one server and send message

I have configure JMS bridge between MQ queue and a distributed queue ( which is targeting JMS servers in a cluster ).
Bridge is able to connect to all servers and transfer messages, except one.
Messages arriving on the MQ queue are delivered by the JMS bridge to all the JMS servers except one
We turned on debug on MessagingBridge on affected server and got the error msg in the attached log.
Following is the exception strace:
<Jan 21, 2010 7:22:19 PM EST> <Warning> <MessagingBridge> <BEA-200026> <Bridge "TsysTIPSBridge" encountered some problems in one of
its adapters or underlying systems. It stopped transferring messages and will try to reconnect to the adapters shortly. (The excepti
on caught was java.lang.Exception: javax.resource.ResourceException: Error sending message
at weblogic.jms.adapter.JMSBaseConnection.throwResourceException(JMSBaseConnection.java:1470)
at weblogic.jms.adapter.JMSBaseConnection.send(JMSBaseConnection.java:714)
at weblogic.jms.adapter.JMSConnectionHandle.send(JMSConnectionHandle.java:144)
at weblogic.jms.bridge.internal.MessagingBridge.onMessageInternal(MessagingBridge.java:1325)
at weblogic.jms.bridge.internal.MessagingBridge.onMessage(MessagingBridge.java:1251)
at weblogic.jms.adapter.JMSBaseConnection$29.run(JMSBaseConnection.java:2070)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.jms.adapter.JMSBaseConnection.onMessage(JMSBaseConnection.java:2066)
at com.ibm.mq.jms.MQMessageConsumer.receiveAsync(MQMessageConsumer.java:2969)
at com.ibm.mq.jms.SessionAsyncHelper.run(SessionAsyncHelper.java:406)
at java.lang.Thread.run(Thread.java:595)
-------------- Linked Exception ------------
javax.resource.ResourceException: Error creating producer or sending message
at weblogic.jms.adapter.JMSBaseConnection.throwResourceException(JMSBaseConnection.java:1470)
at weblogic.jms.adapter.JMSBaseConnection.sendInternal(JMSBaseConnection.java:815)
at weblogic.jms.adapter.JMSBaseConnection.access$200(JMSBaseConnection.java:84)
at weblogic.jms.adapter.JMSBaseConnection$6.run(JMSBaseConnection.java:707)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.jms.adapter.JMSBaseConnection.send(JMSBaseConnection.java:704)
at weblogic.jms.adapter.JMSConnectionHandle.send(JMSConnectionHandle.java:144)
at weblogic.jms.bridge.internal.MessagingBridge.onMessageInternal(MessagingBridge.java:1325)
at weblogic.jms.bridge.internal.MessagingBridge.onMessage(MessagingBridge.java:1251)
at weblogic.jms.adapter.JMSBaseConnection$29.run(JMSBaseConnection.java:2070)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.jms.adapter.JMSBaseConnection.onMessage(JMSBaseConnection.java:2066)
at com.ibm.mq.jms.MQMessageConsumer.receiveAsync(MQMessageConsumer.java:2969)
at com.ibm.mq.jms.SessionAsyncHelper.run(SessionAsyncHelper.java:406)
at java.lang.Thread.run(Thread.java:595)
-------------- Linked Exception 2 ------------
javax.jms.MessageNotWriteableException: MQJMS0008: JMS Client attempts to write a read-only message
at com.ibm.jms.JMSMessage.newMessageNotWriteableException(JMSMessage.java:4782)
at com.ibm.jms.JMSMessage.setStringProperty(JMSMessage.java:5738)
at weblogic.jms.client.WLProducerImpl.send(WLProducerImpl.java)
at weblogic.jms.adapter.JMSBaseConnection.sendInternal(JMSBaseConnection.java:773)
at weblogic.jms.adapter.JMSBaseConnection.access$200(JMSBaseConnection.java:84)
at weblogic.jms.adapter.JMSBaseConnection$6.run(JMSBaseConnection.java:707)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.jms.adapter.JMSBaseConnection.send(JMSBaseConnection.java:704)
at weblogic.jms.adapter.JMSConnectionHandle.send(JMSConnectionHandle.java:144)
at weblogic.jms.bridge.internal.MessagingBridge.onMessageInternal(MessagingBridge.java:1325)
at weblogic.jms.bridge.internal.MessagingBridge.onMessage(MessagingBridge.java:1251)
at weblogic.jms.adapter.JMSBaseConnection$29.run(JMSBaseConnection.java:2070)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.jms.adapter.JMSBaseConnection.onMessage(JMSBaseConnection.java:2066)
at com.ibm.mq.jms.MQMessageConsumer.receiveAsync(MQMessageConsumer.java:2969)
at com.ibm.mq.jms.SessionAsyncHelper.run(SessionAsyncHelper.java:406)
at java.lang.Thread.run(Thread.java:595)
I am new to JMS
Please help

What version of WebLogic and MQ are you using?
Have you ensured that the target Destination and Connection Factory are both WebLogic artifacts (neither should reference an MQ resource)?
Tom

Creating raports and sending message automaticlly

Hi all,
Is it possible to set SAP BO to create raport automaticlly (for example on friday at 4pm) and send it using SBOMailer (also automaticlly)?
Regards
Hmg

Hi,
This is probably not possible with B1 as SBOMailer does not have timing capability.
However, you have these features in XL Reporter where you can specifically schedule when the report should be generated and how it should be delivered ... printed, saved to an XLS file, sent to manager e-mail at desired time.
Peter Dominik
SAP
B1 Product Definition

BPM scenario:single sender message type and multiple receiver message types

Hi,
I am doing a scenario in which i have a single file which may contain different record types say type A,B,C.
I want to separate all records of type A, all records of type B, also all records of type C into different files.
so i will have 3 files of type record A,B,C in destination.
I am using File adapter on both sides.
I think one way may be using ccBPM.Can you please inform me how to achieve it using BPM.
If there is any other way Please mention.

You can use multimapping (with or without BPM)
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible ....without BPM
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure ....with BPM...is it that you will always get three output files?

BPM - track and send message based on input message

Similar Messages

Maybe you are looking for