BPM - Unable to generate message from BPM in PI

Hello Experts,
I am using a test scenario using BPM which has only two steps Receive and Send step. The scenario flow looks like File-> BPM-> ECC. File posted from the external file system is picked up by PI processed successfully and sent to teh Integartion Process.
However the later part i.e BPM is supposed to receive this processed message (MATMAS) and send it to ECC. There is no PI message generated for BPM -> ECC part.
I have ticked the Start Process flag in Receive step. Am i missing something else?
Kindly advice.
Thanks and Regards,
Elizabeth.

Hello All,
On testing teh configuartion in ID my scenario works fine and all steps are tested successfully, wheras when i try manually triggering the message from RWB, message fails in Pi with the following error:

- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_INV_SND_SERV</SAP:Code>
<SAP:P1>BPMTriggerAcknowledgement</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Unable to convert the sender service BPMTriggerAcknowledgement to an ALE logical system</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have already tried following this thread IDOC_ADAPTER - ATTRIBUTE_INV_SND_SERV
Is there anything else to be taken care of?
~Elizabeth.

Similar Messages

Why am I getting unable to purchase message from App Store with free apps

Why am I getting unable to purchase message from App Store for free apps on my I pad?

Sign out of your Apple ID, reboot yor iPad and sign in again.
Settings>iTunes and App Store. Tap your ID and sign out.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
Go go back to Settings>iTunes & App Store. Sign in. Try to download the free apps again.

Missing sender information in message from BPM send step

Hi All,
I am testing a scenario uses Integration Process. This Integration process sends out a async message from deadline branch, but this message has empty sender service.
Am I missing something in configuration? Please let me know how can i configure it.
Regards,

Hi,
I chk my RD, ID and Receiver agreement and everything seems to be good.
My Integration process bellow,
1-Receive Step
2-Send Step(with ACK)
3-Deadline Brach(includes a Tranformation step and then it sends out a async message).
This message that sends the tranformation step, is missing the sender service information.
Is important that you know, that this tranformation step, have an empty message as source message.
I fill the target message with constant values and then send it with a send step.
I have tested the IM and it worked fine.
Regards,

Unable to send messages from IS to AE.

Hi,
I am getting 401 Unauthorized error in "Call Adapter" of the IS pipeline its a simple FIle-to-File scenario. I did search on the SDN but unable to find a answer. The user "PIISUSER" is not locked, I checked in SU01 transaction. The J2EE port mentioned is also correct.
Error:
URL: http://XISERVER:50000/MessagingSystem/receive/AFW/XI
USER: PIISUSER
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
<SAP:P1>401</SAP:P1>
<SAP:P2>Unauthorized</SAP:P2>
Thanks for the help in advance.
Sarvesh

Hello,
I think you want to send a message from RWB. For that instead of adapter Engine, select Integration engine, go to test message and give your XI username and pwd.
there , you will get the URL as : http://gda.na.pg.com:8011/sap/xi/engine?type=entry
Try it once and let me know.
Regards,
Sreeni.

BizTalk 2013 SB-Messaging Adapter: Unable to receive messages from a Azure service bus Subscription

Hi,
I am trying to receive messages from a Azure service bus subscription using SB-Messaging Adapter in BizTalk Server 2013 but getting the following error.
"The token provider was unable to provide a security token while accessing 'https://overcasb-sb.accesscontrol.windows.net/WRAPv0.9/'.
Error Code: 407 Proxy Authentication Required. The ISA Server requires authorization to fulfill the request. Access to the Web Proxy filter is denied. (12209)
It seems the error is related with Service Bus Authentication and Authorization with the Access Control Service. Can anybody help me out if I am missing something here?
Also for consuming the AWSB (namespace, topic name, subscription name, Issuer name, Issuer Key) I have referred the following link
http://soa-thoughts.blogspot.in/2013/02/biztalk-server-2013-new-adapters-series.html
Thanks!
Regards,
Gautam
gautam

Hi,
When I am trying to receive the same messages from a Azure service bus subscription using .net (C#) client,
BusSubscriberbusSubscriber =
newBusSubscriber("TestTopic2",
"Endpoint=sb://overcasb.servicebus.windows.net/;SharedSecretIssuer=owner;SharedSecretValue=wqYlT4yHZimeUZacH+1V1hj/ZrKu7zK9ELaaLYDxqjc=",
"AssetMovement",
"AssetMovement");
I am getting the same error here also.
"The token provider was unable to provide a security token while accessing 'https://overcasb-sb.accesscontrol.windows.net/WRAPv0.9/'.
Error Code: 407 Proxy Authentication Required. The ISA Server requires authorization to fulfill the request. Access to the Web Proxy filter is denied. (12209)
By setting <defaultProxy useDefaultCredentials="true" /> in appconfig, I got rid of the above error. And now its working fine with .net(C#) client.
<configuration>
<system.net>
<defaultProxy useDefaultCredentials="true" />
</system.net>
</configuration>
The same setting I tried in BTSNTSvc.exe config file and ofcourse restarted the host instance but still getting the same error. Any help?
gautam

Unable to raise Message from Sattelite System to support Desk

Hi Experts,
I am facing issue when i try to raise the message from sattelite system to support desk in solution manager 7.0.For this Below Checks i ahve already performed please suggest i am missing something.
1.RFC in Back Format.
2.addtional RFC authorization to RFC user in solmon system.
3.Sattelite systems entry Maintained in solmon in SMSY and loical clients.
4. No Range Maintained for both internal as well as external.
5.Support Pack level looks fine
Thanks in Advance
Suveer

I have come across this issue. The system was giving the same error message as you got.(error 513 ). But actual problem turned out to be authorization..!!(took some time for debugging that)
Look at the user which <solman>_back RFC uses when logging in from satellite system. Now login to Solution manager and check the authorization of that user. Does it have the following roles assigned..
SAP_SUPPDESK_CREATE
SAP_SV_FDB_NOTIF_BC_ADMIN
If NO, generate these roles (if not done) and assign them to this user.
Do let me know if it helps...
Regards,
Anish

Unable to capture messages from java.util.logging

I have a class called (Caller.java) which invokes a method called foo from another java class(Util.java) using reflection API.Now this method foo logs messages using Java's logger.My requirement is to call foo for 3 times from Caller and capture/redirect the log messages into 3 log files.
But only the first log file is capturing the log messages(from logger) and other two are not ?
Plz suggest if I am doing somethin wrong here ?
Caller.java
package project2;
import java.io.File;
import java.io.FileNotFoundException;
import java.io.PrintStream;
import java.lang.reflect.Method;
public class Caller {
 public Caller() {
 public static void main(String[] args) throws Exception {
 Caller caller = new Caller();
 for (int i = 0 ;i<3 ;i++ ) {
 caller.createLogStream(i);
 System.setOut(caller.getPs());
 System.setErr(caller.getPs());
 /*****************Invoking Util.java*****************************/
 Class clas = Class.forName("project2.Util");
 Method m = clas.getMethod("foo",null);
 Object obj =clas.newInstance();
 m.invoke(obj,null);
 public void createLogStream(int i) throws FileNotFoundException {
 ps = new PrintStream(new File(System.getenv("HOME")+File.separator+"MyLog"+i+".log"));
 public void closeLogStream(){
 ps.close();
 ps = null;
 private PrintStream ps = null;
 public PrintStream getPs() {
 return ps;
} Util.java
package project2;
import java.util.logging.Logger;
public class Util {
 Logger logger = null;
 public Util() {
 logger = Logger.getLogger(this.getClass().getName());
 public void foo(){
 System.out.println("Hello out stream");
 System.err.println("Hello error stream");
 logger.info("This is an information");
 logger.warning("This is a warning message");
 logger.severe("This is fatal!! ");
}First Log file MyLog0.log:
Hello out stream
Hello error stream
Feb 16, 2009 7:55:55 PM project2.Util foo
INFO: This is an information
Feb 16, 2009 7:55:55 PM project2.Util foo
WARNING: This is a warning message
Feb 16, 2009 7:55:55 PM project2.Util foo
SEVERE: This is fatal!!
Feb 16, 2009 7:55:55 PM project2.Util foo
INFO: This is an information
Feb 16, 2009 7:55:55 PM project2.Util foo
WARNING: This is a warning message
Feb 16, 2009 7:55:55 PM project2.Util foo
SEVERE: This is fatal!!
Feb 16, 2009 7:55:55 PM project2.Util foo
INFO: This is an information
Feb 16, 2009 7:55:55 PM project2.Util foo
WARNING: This is a warning message
Feb 16, 2009 7:55:55 PM project2.Util foo
SEVERE: This is fatal!! Other 2 log files have only this much
Hello out stream
Hello error stream

A stale Connection Factory or Connection Handle may be used in SOA 11g
Regards,
Anuj

Unable to generate report from standard cubes of R/3 in BEX

Hi all,
when iam trying to generate report from R/3 standard cubes of HR in BEX ,it is showing an error in hirarchies given below:
ERROR: Default values 'drill down characterists' 'qualification group' are not permitted for display hirarchy'QK-QK'.
WARNING:No Hiararchy 'QUALCATA' exists for drill down characterists,'qualification',select a different hirarchy
WARNING:No Hiararchy 'AGE' exists for drill down characterists,'AGE in Years',select a different
hirarchy
WARNING:No Hiararchy 'QK-QK' exists for drill down characterists,'Qualification Group',select a different hirarchy
WARNING:No Hiararchy 'ORGEH' exists for drill down characterists,'ORGANIZATIONAL UNIT',select a different hirarchy
please help in in this issue.
regards
Vamshi D Krishna

Hi,
Have you checked hierarchy which attached. The problem is with Hierarchy.
Please do changes to the hierarchy and attach a proper hierarchy.
Is the data available for that hierarchy?
Let us know if you still facing any issues.
Reg
Pra

BPM 12c - unable to deploy BusinessObjects from BPM Composer

While making a lab project I've added two business objects in BPMComposer 12c but they are not deployed. The system shows no error but always shows these unpublished changes.
In the log file written that the system has no access to \ui\editor\businessObjectsEditor and /ui/validation/businessProperties. I have checked the access and found no limitations.
Do you have any suggestions?
Thank you!
<oracle.adf.view> <IncludeDefTag> <doStartTag> <CANNOT_FIND_INCLUDE_PARENT_WITH_PARAM>
<20.03.2015 10:38:31 MSK> <Error> <HTTP> <BEA-101008> <[ServletContext@2080587344[app:BPMComposer module:/bpm/composer path:null spec-version:3.0]] Cannot get InputStream of resource "/ui/editor/businessObjectsEditor".
java.io.FileNotFoundException: C:\Oracle\soa_bpm12c\WORK\system12.1.3.0.41.140521.1008\DefaultDomain\servers\DefaultServer\tmp\_WL_user\BPMComposer\98gr2c\war\ui\editor\businessObjectsEditor (Отказано в доступе)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:146)
at weblogic.utils.classloaders.FileSource.getInputStream(FileSource.java:31)
at weblogic.servlet.internal.WarSource.getInputStream(WarSource.java:65)
at weblogic.servlet.internal.WebAppServletContext.getResourceAsStream(WebAppServletContext.java:844)
Truncated. see log file for complete stacktrace
>
<20.03.2015 10:38:33 MSK> <Error> <HTTP> <BEA-101008> <[ServletContext@2080587344[app:BPMComposer module:/bpm/composer path:null spec-version:3.0]] Cannot get InputStream of resource "/ui/validation/businessProperties".
java.io.FileNotFoundException: C:\Oracle\soa_bpm12c\WORK\system12.1.3.0.41.140521.1008\DefaultDomain\servers\DefaultServer\tmp\_WL_user\BPMComposer\98gr2c\war\ui\validation\businessProperties (Отказано в доступе)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:146)
at weblogic.utils.classloaders.FileSource.getInputStream(FileSource.java:31)
at weblogic.servlet.internal.WarSource.getInputStream(WarSource.java:65)
at weblogic.servlet.internal.WebAppServletContext.getResourceAsStream(WebAppServletContext.java:844)
Truncated. see log file for complete stacktrace

Thank you, Antonis. I've already created and deployed these BusinessObjects by BPMStudio. But thank you anyway!

Unable to delete messages from queue.

I have a journaling rule setup to send mail to a archive appliance. I have two messages in my queue that are From Address:<> to my recipient (my archiver's email address). The journal rule works fine since it is working for all my users mail, but I have two messages stuck in my queue complaining that they could not be categorized and an event 9213 for MSExchangeTransport every 30 minutes.
"A non-expirable message with the internal message ID 7996 could not be categorized. This message may be a journal report or other system message. The message will remain in the queue until administrative action is taken to resolve the error. Other messages may also have encountered this error. To further diagnose the error, use the Queue Viewer or the Mail Flow Troubleshooter."
I have tried via the GUI and Shell to remove these two messages. The GUI gives me an error:
Microsoft Exchange Error
Action 'Remove (with NDR)' could not be performed on object 'RE: Test to determine if email can be delivered & Received'.
RE: Test to determine if email can be delivered & Received
Failed
Error:
The requested operation can't be performed for the object with identity MyMailServerName\Submission\7999.
OK
The Shell will actually not report back an error but I still have those messages in the queue. The command to see info about the message was:
Get-Message -IncludeRecipientInfo | Where { $_.Recipients -Like "*[email protected]*" } | Format-List
Then I tried deleting the message using the "InternetMessageID" info I gathered from this.
Remove-Message -Filter {InternetMessageID -eq "[email protected]"} -WithNDR $false
This prompts me for a Yes, No, etc... responce (I thought I had it this time) and gave me no error, but the message still resides in queue.
I am at a loss. Any help?

Correct, two messages stuck in queue and cannot remove.
Environment is a Windows 2003 R2 w/ SP2 64bit server, Exchange 2007 SP1 with all roles, AD/DNS is also Windows 2003 R2 w/ SP2 64bit.
This just seemed to start happening a few days ago and just with these two particular messages. I have a archive appliance from ArcMail and a journal rule setup in Exchange to journal all mail to the ArcMail appliance. This has been working and continues to work except for these two messages.
[PS] C:\>Get-Message -IncludeRecipientInfo | Where { $_.Recipients -Like "*[email protected]*" } | Format-List
Identity : CO-MAIL1\Submission\7996
Subject : RE: Test to determine if email can be delivered & Received
InternetMessageId : <[email protected]>
FromAddress : <>
Status : Retry
Size : 29638B
MessageSourceName : Journaling
SourceIP : 255.255.255.255
SCL : 0
DateReceived : 9/18/2008 1:39:34 PM
ExpirationTime :
LastError : Categorization failed. The message will be deferred and ret
 ried because it was marked for retry if rejected.
RetryCount : 0
Queue : CO-MAIL1\Submission
Recipients : {[email protected]}
IsValid : True
ObjectState : Unchanged
Identity : CO-MAIL1\Submission\7999
Subject : RE: Test to determine if email can be delivered & Received
InternetMessageId : <[email protected]>
FromAddress : <>
Status : Retry
Size : 29623B
MessageSourceName : Journaling
SourceIP : 255.255.255.255
SCL : 0
DateReceived : 9/18/2008 1:39:34 PM
ExpirationTime :
LastError : Categorization failed. The message will be deferred and ret
 ried because it was marked for retry if rejected.
RetryCount : 0
Queue : CO-MAIL1\Submission
Recipients : {[email protected]}
IsValid : True
ObjectState : Unchanged
Domain Controller Diagnosis
Performing initial setup:
 Done gathering initial info.
Doing initial required tests
 Testing server: co-site\CO-DNS1
 Starting test: Connectivity
 ......................... CO-DNS1 passed test Connectivity
Doing primary tests
 Testing server: co-site\CO-DNS1
 Starting test: Replications
 ......................... CO-DNS1 passed test Replications
 Starting test: NCSecDesc
 ......................... CO-DNS1 passed test NCSecDesc
 Starting test: NetLogons
 ......................... CO-DNS1 passed test NetLogons
 Starting test: Advertising
 ......................... CO-DNS1 passed test Advertising
 Starting test: KnowsOfRoleHolders
 ......................... CO-DNS1 passed test KnowsOfRoleHolders
 Starting test: RidManager
 ......................... CO-DNS1 passed test RidManager
 Starting test: MachineAccount
 ......................... CO-DNS1 passed test MachineAccount
 Starting test: Services
 ......................... CO-DNS1 passed test Services
 Starting test: ObjectsReplicated
 ......................... CO-DNS1 passed test ObjectsReplicated
 Starting test: frssysvol
 ......................... CO-DNS1 passed test frssysvol
 Starting test: frsevent
 ......................... CO-DNS1 passed test frsevent
 Starting test: kccevent
 ......................... CO-DNS1 passed test kccevent
 Starting test: systemlog
 ......................... CO-DNS1 passed test systemlog
 Starting test: VerifyReferences
 ......................... CO-DNS1 passed test VerifyReferences
 Running partition tests on : ForestDnsZones
 Starting test: CrossRefValidation
 ......................... ForestDnsZones passed test CrossRefValidation
 Starting test: CheckSDRefDom
 ......................... ForestDnsZones passed test CheckSDRefDom
 Running partition tests on : DomainDnsZones
 Starting test: CrossRefValidation
 ......................... DomainDnsZones passed test CrossRefValidation
 Starting test: CheckSDRefDom
 ......................... DomainDnsZones passed test CheckSDRefDom
 Running partition tests on : Schema
 Starting test: CrossRefValidation
 ......................... Schema passed test CrossRefValidation
 Starting test: CheckSDRefDom
 ......................... Schema passed test CheckSDRefDom
 Running partition tests on : Configuration
 Starting test: CrossRefValidation
 ......................... Configuration passed test CrossRefValidation
 Starting test: CheckSDRefDom
 ......................... Configuration passed test CheckSDRefDom
 Running partition tests on : lcsd
 Starting test: CrossRefValidation
 ......................... lcsd passed test CrossRefValidation
 Starting test: CheckSDRefDom
 ......................... lcsd passed test CheckSDRefDom
 Running enterprise tests on : lcsd.local
 Starting test: Intersite
 ......................... lcsd.local passed test Intersite
 Starting test: FsmoCheck
 ......................... lcsd.local passed test FsmoCheck
[PS] C:\>Remove-Message -filter {FromAddress -eq "<>"} -withNDR $false -debug -verbose
VERBOSE: Remove-Message : Beginning processing.
Confirm
Are you sure you want to perform this action?
Removing the messages that match filter "FromAddress -eq "<>"".
Yes Yes to All No [L] No to All Suspend [?] Help
(default is "Y"):Y
VERBOSE: Remove-Message : Ending processing.
[PS] C:\>Remove-Message -Filter {InternetMessageID -eq "[email protected]"} -WithNDR $false -debug -verbose
VERBOSE: Remove-Message : Beginning processing.
Confirm
Are you sure you want to perform this action?
Removing the messages that match filter "InternetMessageID -eq
"[email protected]"".
Yes Yes to All No [L] No to All Suspend [?] Help
(default is "Y"):Y
VERBOSE: Remove-Message : Ending processing.
[PS] C:\>Remove-Message -filter {FromAddress -eq ""} -withNDR $false -debug -ver
bose
VERBOSE: Remove-Message : Beginning processing.
Confirm
Are you sure you want to perform this action?
Removing the messages that match filter "FromAddress -eq """.
Yes Yes to All No [L] No to All Suspend [?] Help
(default is "Y"):Y
VERBOSE: Remove-Message : Ending processing.
[PS] C:\>
Tried several filter options and all had the same result. No events in the event viewer and did not remove the stuck messages.

Reciver File channel unable to get message from Xi in file- file scenario

Hi All,
I have done a small File to File scenario.
Sender file adapter receiver the file and gives it to XI, then deletes the file from that directory.
Receiver is unable to get the file.
I have a message mapping defined for the receiver which concatenates two fields from one message type and transforms it to another.
I have configured the scenario.
When I check the adapter stats Sender channel picks the Xml deletes it from the directory.
Sender channel:
Sender Adapter v1014 for Party '', Service 'SourceFileBS':
Configured at 04:25:50 2006-06-03
Up and running: Last message processing started 05:10:50 2006-06-03
last poll interval started 05:10:50 2006-06-03
length 60,000 secs
Receiver channel:
Receiver Adapter v1027 for Party '', Service 'TargetFileBs':
Configured at 04:25:50 2006-06-03
Up and running - no message processing until now
I configured the scenario (receiver agreement, determination, sender agreement, and interface determination).
Instead of Business systems, I Configured Business services (Virtual) for inter company communication.
XI is unable to give the message to the receiver channel.
Please help me to debug the scenario.
Regards,
Meher

Hi All,
Thanks for all your Responses.
I see a high payload in my monitor belonging to some other process ( shipped with XI) MAT_LEGACY.
The scenario which I executed is showing up a status of scheduled
Adapter has picked the message at 01:59:37 2006-09-12
and start time and the end time of the message is shown as
01:59:37 2006-09-13 in the XI monitor with a status of scheduled .
can I purge the sceduled messages for MAT_LEGACY scenario?
if yes how do i do that?
is this causing a problem for the file not being received by receiver?
when i go to the transaction manager with SMQ1 with the client 100 i see the queue on which the above message is persisted with a queue status of ready.
help me.
Regards,
Meher

[SOLVED] Unable to delete message from Kmail

There's one email message I cant delete from Kmail. If I click on it and press Del, it tooks about minute until Kmail says Message sucessfully deleted but message remains. If I try to move message by using drag and drop I get popup notification
Unknown error. (Unable to update item)
Other messages I can move/delete without problems.
Last edited by benke (2011-11-07 08:37:27)

Hello benke, would please mark this thread [SOLVED] instead of [CLOSED].
This is because "closed" is used by the system to mark a thread which is not accessible for new posts anymore.
Thanks, bernarcher.

Unable to capture message from BAPI_REQUIREMENTS_CHANGE in production

Hi,
I have written code for uploading PIRu2019s as per demand planner in SAP R/3.
For this i have used BAPI_REQUIREMENTS_CREATE and BAPI_REQUIREMENTS_CHANGE.
As the command COMMIT WORK is entered within the BAPI, i have not used TRANSACTION_COMMIT bapi.
It was tested in Development server & working fine in Production server.
But recently (after 2 months), messages captured from return table of BAPI_REQUIREMENTS_CHANGE, is not coming.
If any one has faced similar problem, they can guide me to resolve this issue.
Thanks & regards,
Tanaya

Hi Mamta,
I have already checked that link.
regards,
tanaya

Unable to generate message for Consignment Note

Dear all,
I would like to print Consignment Note from MR91, but the system issue message - "No message for initial / repeated processing exist", does anyone know how to solve this issue?
Do I miss out any setting in IMG or it is due to program error? My application release (SAP_APPL) is 470.
Thanks.
Data selection
Output type = KONS
Sort order = 01
Processing mode = 1 or 2
Document number = 51xxxxxxxx
Fiscal year = xxxx
Comany code = xxxx

Hi LOI ,
At first check whether the condition records are maintained. If it doesn't exist , maintain the same using MRM1 Transaction.
Goto Transaction NACE and Click on Application MR and then o/p types.
Check whether KONS is cofigured properly.
Regards
Ramesh Ch

Unable to dequeue messages from queue by AQ Adapter

Hi All,
I am using XE database and I have created the datasource and JNDI for it in Weblogic Console. I am giving this databse connection in AQ Adapter. While deploying the composite, it is creating below error in EM console. Not sure where is the problem. Could someone please suggest what to do in this case.
AdapterFrameworkImpl::endpointActivation - Endpoint Activation Error.
The Resource Adapter AQ Adapter was unable to activate the endpoint oracle.tip.adapter.aq.inbound.AQDequeueActivationSpec:{SchemaValidation=false, QueueName=ETH_QUEUE, DatabaseSchema=HR} due to the following reason: javax.resource.spi.IllegalStateException: [Connector:199176]Unable to execute allocateConnection(...) on ConnectionManager. A stale Connection Factory or Connection Handle may be used. The connection pool associated with it has already been destroyed. Try to re-lookup Connection Factory eis/AQTest from JNDI and get a new Connection Handle.
Please correct the reported issue and redeploy the BPEL process.
at oracle.integration.platform.blocks.adapter.fw.impl.AdapterFrameworkImpl.endpointActivation(AdapterFrameworkImpl.java:513)
at oracle.integration.platform.blocks.adapter.fw.jca.lifecycle.JCAEndpointActivation.performEndpointActivation(JCAEndpointActivation.java:637)
at oracle.integration.platform.blocks.adapter.fw.jca.lifecycle.JCAEndpointActivation.activateInboundJcaEndpoint(JCAEndpointActivation.java:620)
at oracle.integration.platform.blocks.adapter.fw.jca.lifecycle.JCAEndpointActivation.performActivation(JCAEndpointActivation.java:383)
at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterServiceRevisionRegistry$AdapterServiceRevision.endpointActivation(AdapterServiceRevisionRegistry.java:583)
... 50 more
Caused by: javax.resource.spi.IllegalStateException: [Connector:199176]Unable to execute allocateConnection(...) on ConnectionManager. A stale Connection Factory or Connection Handle may be used. The connection pool associated with it has already been destroyed. Try to re-lookup Connection Factory eis/AQTest from JNDI and get a new Connection Handle.
at weblogic.connector.outbound.ConnectionManagerImpl.checkIfPoolIsValid(ConnectionManagerImpl.java:442)
at weblogic.connector.outbound.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:109)
at oracle.tip.adapter.aq.v2.jca.AQConnectionFactory.getConnection(AQConnectionFactory.java:83)
at oracle.tip.adapter.aq.v2.database.DBDequeueAgentFactory.createDBDequeueAgent(DBDequeueAgentFactory.java:43)
at oracle.tip.adapter.aq.v2.AQEndpoint.activate(AQEndpoint.java:55)
at oracle.tip.adapter.aq.v2.jca.AQResourceAdapter.endpointActivation(AQResourceAdapter.java:62)
at oracle.integration.platform.blocks.adapter.fw.impl.AdapterFrameworkImpl.endpointActivation(AdapterFrameworkImpl.java:494)
... 54 more
Thanks,
Dhiraj Mishra

A stale Connection Factory or Connection Handle may be used in SOA 11g
Regards,
Anuj

BPM - Unable to generate message from BPM in PI

Similar Messages

Maybe you are looking for