BPM with Healthcare Adapter

Hi All,
I am new to Oracle BPM technology, i am trying to work with Healthcare adapter in BPM project. But I couldn't able to find the healthcare adapter in component palette (composite.xml) of BPM project.
Will it be possible to work with HL7 Adapter in BPM. Please give me any other solution to do this as same.
Thanks in Advance,
Ahamed

Hi Ahmed,
The Healthcare adapter you are looking for in SOA/BPM component palette will not be available along with the SOA Suite.
Oracle is providing that Healthcare adapter with a separate license cost, which everyone has to buy it separately.
The Healthcare adapter supports HL7, HIPAA, X12, EDI and NCPDP protocols by default.
Satya

Similar Messages

  • Oracle Healthcare Adapter - Component sequencing

    Hi,
    We have configured (followed the sequencing guide -> component sequencing -> approach 3)
    Healthcare endpoint configuration:
        1. Inbound Endpoint with MLLP protocol with Connection Mode as Server in the healthcare console.
        2. Sequencing is enabled in the MLLP (selected the sequencing checkbox). Sequencing Mode is "None". [Not selected  -- Interface sequencing]
        3. Configured Immediate Ack -- Default
        4. Configured "Document to Receive"  as ADT_A01  and assigned in the composite dropdown the Composite name.
    Composite:
       1. Designed the Inbound with Healthcare adapter that ADT_A01 and used "default"   (not used jms -- using InMemory)
       2. Mediator (Mediator Resequencer as FIFO) and assigned the group name as the Inbound Endpoint
       3. Outbound that Mediator route to is a FileAdapter, that place the file in the folder.
    Issue:
       Message goes into the ‘MSG_WAIT_TRANSMIT’ state.
       But when i uncheck the sequencing checkbox. Message is flowing fine.
    Wanted to know, if i am missing any configuration for component sequencing.

    go administrator screen, the to run time settings  and make sure inbound and outbound dispatcher count is set to value > 0
    If it is >0 ,see, if any of the previous message  is stuck in error for the same endpoint. this you can check sequence dashboard
    Important point:
    please use interface sequencing, it provides better performance and manageability.

  • Integrate a BPM with a Webservice of SAP XI.

    Hi experts,
    We want to integrate a BPM with a Websevice published in SAP XI.
    The BPM sends messages synchronous (abstract interface) to a Business Service that receives a message synchronous (inbound interface).
    For the integration of these services is necessary to set up a Receiver Agreement with a Communication Channel of type SOAP Receiver.
    My questions are:
    Why should the communication takes place between SAP XI I have to set up a channel SOAP?
    Is there any way to send messages from a BPM to a service SAP XI (Webservice / Interface) in an efficient manner?
    Thanks,
    Jose.

    To deploy the wsdl file in XI,
    You can connect to XI server by using the End Point URL as
    The SOAP Sender uses the XI Server URL as below
    http://<server>:<port>/XISOAPAdapter/MessageServlet?channel=<party>:<service>:<channel>
    Service & channel indicates the Sender SOAP adapter in XI to be used..and will direct to integration server.
    Refer
    call Webservice with XI SOAP Adapter
    How To Set Up a Web-Service-Related Scenario with SAP XI
    https://websmp207.sap-ag.de/~form/sapnet?SHORTKEY=01100035870000582377&
    Invoke Webservices using SAPXI
    SOAP Sender Steps
    SOAP Sender Steps
    Edited by: parvathy sriraman on Sep 19, 2008 9:42 AM

  • IPod Nano crashes with BMW adapter after 1.3 update

    Hi All,
    I have a 1st Gen 4G iPod Nano that I have updated to the new firmware version 1.3. The problem is that now when I connect the iPod to the BMW adaptor kit in my car the iPod freezes after approximately 1 hour and will not change play lists or tracks. Then when I unplug the adaptor the iPod is frozen with "BMW okay to disconnect" on the screen. Once resetting, the iPod will go back to normal for approximately one hour and then the error will start over again. Does anyone have a suggestion or is it possible to revert to old firmware?
    Thanks!
    MacBook Pro   Mac OS X (10.4.8)  

    Hi all,
    Here is my update on the issue:
    While reconnecting and disconnecting the iPod, I accidentally dislodged the adapter from the stereo which resulted in a service call to BMW to reconnect the adapter.
    I ended up purchasing the new Product Red iPod which works fine with the adapter. To sum things up, the fact that I just updated the firmware may not have anything to do with the BMW adapter problems. The BMW adapter is finicky. I have friends with the same adapter in an X3 as well as a Mini Cooper with the same issues; the adapter becomes loose and begins to malfunction.
    My recommendation is test your adapter with another iPod and if the problem persists take your car back to BMW to fix the problem.
    *Note: Cold weather should not affect how the adapter works because mine has been working fine in -30 degree Celsius weather
    MacBook Pro   Mac OS X (10.4.8)  
    MacBook Pro   Mac OS X (10.4.8)  
    MacBook Pro   Mac OS X (10.4.8)  

  • How do i connect my macbook pro to my tv with my HDMI cord with the adapter to a 32" panasonic vieja tv, how do i connect my macbook pro to my tv with my HDMI cord with the adapter to a 32" panasonic vieja tv?

    how do i connect my macbook pro to my tv with my HDMI cord with the adapter to a 32" panasonic vieja tv?

    get a minidisplayport to HDMI adapter found at http://store.apple.com/us?afid=p219%7CGOUS&cid=AOS-US-KWG
    get a minidisplayport to HDMI adapter found at http://store.apple.com/us?afid=p219%7CGOUS&cid=AOS-US-KWG
    get a minidisplayport to HDMI adapter found at http://store.apple.com/us?afid=p219%7CGOUS&cid=AOS-US-KWG

  • Error in BPM with multimapping.

    Hi,
    I've got next  error in a transfromation step of bpm with multimapping :
      <?xml version="1.0" encoding="utf-8" ?>
    - <MappingTrace>
      <Trace level="1" type="T">Mapping http://www.miquello.com/C3900 IM_I3934_REPLICA_BBY , Software Component Version 931D4B005DF711DFC0CACC330A640786</Trace>
      <Trace level="1" type="T">Mapping Step 1 , Type JAVA , Program com/sap/xi/tf/_MM_I3934_REPLICA_BBY_</Trace>
      <Trace level="3" type="T">MTOM Attachments Are Written to the Payload</Trace>
      <Trace level="3" type="T">Mapping has exactly one source message</Trace>
      <Trace level="3" type="T">Dynamic Configuration Is Empty</Trace>
      <Trace level="3" type="T">Executing multi-mapping</Trace>
      <Trace level="1" type="T">while trying to invoke the method java.lang.String.length() of an object loaded from local variable 'guid' Thrown: java.lang.NullPointerException: while trying to invoke the method java.lang.String.length() of an object loaded from local variable 'guid' at com.sap.guid.GUID.parseHexGUID(GUID.java:1046) at com.sap.guid.GUIDGenerator.parseHexGUID(GUIDGenerator.java:111) at com.sap.aii.utilxi.misc.api.GUIDFactory.parseHexGUID(GUIDFactory.java:127) at com.sap.aii.ibrun.sbeans.mapping.ParametrizationMap.createInputParameter(ParametrizationMap.java:140) at com.sap.aii.ibrun.sbeans.mapping.ParametrizationMap.createElement(ParametrizationMap.java:112) at com.sap.aii.ibrun.sbeans.mapping.ParametrizationMap.createParametrizations(ParametrizationMap.java:57) at com.sap.aii.ibrun.sbeans.mapping.ParametrizationMap.<init>(ParametrizationMap.java:37) at com.sap.aii.ibrun.sbeans.mapping.ParametrizationMap.newInstance(ParametrizationMap.java:65) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:111) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:72) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at sun.reflect.GeneratedMethodAccessor804.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:592) at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:46) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:71) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:38) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:22) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:16) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:21) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:16) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:133) at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164) at $Proxy1098.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:592) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:183) at com.sap.engine.services.rfcengine.RFCJCOServer$J2EEApplicationRunnable.run(RFCJCOServer.java:267) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:182) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:280)</Trace>
      </MappingTrace>
    However i've tested with same input message in Operation Mapping ESR, without any error.
    What could be the cause?
    Thanks, in advance.
    Carme.

    Hi,
    Are you using parameterized mapping or RFC lookup in your mapping???? If yes, please make sure that you are passing the parameter in the interface determination instead of null value.
    Also verify whether your cache is updated  with the latest GUID of your mapping program or not.
    Regards,
    Priyanka.

  • Problem with FTP Adapter in creating a new Folder

    Hi all,
    I have a requirement in which a BPEL process shud create a folder named as sysdate dynamically and write a
    CSV file into that.(ex: PO/2010-03-09/PO_1.csv).I created a header variable for Oubound FTP adapter and
    passing the file directory as concat('PO/',xp20:current-date(),'/') to outbound header directory variable.Problem is FTP
    adapter is not creating the sysdate folder its says:1.check u have privileges 2.file name is too long....Blah....Blah.
    But i have all the privileges for that user.If i manually create the sysdate folder the FTP adapter is placing the CSV
    file.The same works fine with file adapter...but i need to use FTP since the FTP server can change in future.Seems to
    be a problem with FTP adapter....can some one help.
    Iam using SOA 10.1.3.4
    Regards,
    Edited by: 0racler on Mar 9, 2010 4:46 AM
    Edited by: 0racler on Mar 9, 2010 5:49 AM

    any thoughts????

  • Issue with Apps adapter for Create_Cust_Account API

    Hi ,
    I need to invoke this package from apps adapter in BPEL(10.1.3.5).
    Create Customer: HZ_CUST_ACCOUNT_V2PUB. create_cust_account. This is a Over loaded procedure. Look for the Procedure with these Parameters.
    PROCEDURE create_cust_account (
    p_init_msg_list IN VARCHAR2:= FND_API.G_FALSE,
    p_cust_account_rec IN CUST_ACCOUNT_REC_TYPE,
    p_organization_rec IN HZ_PARTY_V2PUB.ORGANIZATION_REC_TY
    PE,
    p_customer_profile_rec IN HZ_CUSTOMER_PROFILE_V2PUB.CUSTOMER
    PROFILEREC_TYPE,
    p_create_profile_amt IN VARCHAR2:= FND_API.G_TRUE,
    x_cust_account_id OUT NUMBER,
    x_account_number OUT VARCHAR2,
    x_party_id OUT NUMBER,
    x_party_number OUT VARCHAR2,
    x_profile_id OUT NUMBER,
    x_return_status OUT VARCHAR2,
    x_msg_count OUT NUMBER,
    x_msg_data OUT VARCHAR2
    But I’m getting the following error,
    An error occurred while running Jpublisher.missing method
    · I’ve tried with Database adapter. But in the runtime I’m not able to pass oracle apps initialization parameter in spite of using transaction and idempotent property in partnerlink.
    · Then I’ve tried to invoke fnd_global.apps_initialize first then call the package from database adapter, but it fails again, apparently its not able to execute both DBadapter in same database session although they are in same BPEL transaction.
    When I’m passing the initialization parameters in adapter created wrapper procedure then its working fine and customer got created.
    Please let me know where I’m going wrong or issue with apps adapter.
    It’s urgent …
    Thanks in Advance,
    Shreekanta

    Thanks for the reply.
    I'm able to execute the BPEL flows using DB adapter in same session and customer got created.
    But I'm wondering why I cant invoke the API using Apps adapter though its standard one.
    wsdl file is not getting generated as the adapter wizard not get completed.
    Do u have any idea why its giving ' error occurred while running Jpublisher.missing method' error?should I conclude that apps adapter does not support overloaded procedure.

  • I just purchased a 3TB Time Capsule.  I live in Italy and have 220V power.  The Time Capsule is rated for that, but the cord says 125V.  Can I use this cord with an adapter, or do I need to buy a new cord at an Italian store?

    I just purchased a 3TB Time Capsule.  I live in Italy and have 220V power.  The Time Capsule is rated for that, but the cord says 125V.  Can I use this cord with an adapter, or do I need to buy a new cord at an Italian store?

    Due to the kind of plug used the US power cord is rated at the 125v value.. and legally we cannot advise you to use on higher voltages.. although I have never had issues in Australia.. 240v.
    But adapters from your Euro power plug to US are generally ugly .. unsightly things.. and often sit high above the socket and are none too stable.. I agree with Bob.. just go out and buy a standard figure 8 power cord.. check with Apple in Italy for a white one.. if you are going to have it on show.. black are far more common. Or even check ebay for a standard power Apple power cord as a number of items they sell use the figure8 socket. 

  • Problem with FIle Adapter

    Hi
    We r facing typical problem with file adapter.
    Lets say there are 30 files to be processed  by placing an copy in arichive folder by file adapter  based on pooling 
    parameters.
    All the 30  files are picked up and we can see the copies in archive folder.
    But when we go to RWB and check the audit log,
    there we could see only 25 files , the 5 files are missing.
    no trace found therre about the 5 files.
    This is happening only some times and not to all the files placed in the FTP. Later when the same file is placed back from the Archive folder to the Source folder, the file is being picked and processed succesfully.
    unfortunately this is happening on Production server
    Any pointers which could trouble shoot this issue.
    Regards
    shekar chandra

    Hi,
    Couple of thing which you can try....
    1. Use EOIO QoS and check if you still face the issue.
    Is some program or application writing files to the directory? If yes I would recommend the use of a temporary name to write the files and then rename them.
    Sometimes when an external application connects via FTP and transfers the files...
    The file could be picked up by the adapter poll even before the transfer of data is done.
    Which is why you will find that the file is archived but there is no xml message created for the same in the Integration engine.
    Try increasing the poll interval. This helps sometimes.
    Regards,
    Sidharth

  • File Matching with FTP Adapter

    Guys,
    I have particular requirement where FTP Adapter needs to read set of files
    FILENAME.PCL
    FILENAME.I01
    the file name would be matching but extensions are different.
    the adapter needs to read the file match if they are SET of files ( based on file name) and move into target directory if not move into Error Directory .The Data needs some manipulation before it's written into target location so we are using ESB ( also for error notification) is it possible with FTP Adapter within ESB?
    Thanks

    May be difficult with ESB, may require BPEL. Can you give a specific example as that would make it easier to see what you mean.
    Antony

  • Problem with CC Receiver with AS2 Adapter Seeburger

    Hi,
    I try to test the AS2 Adapter with Receiver channel y one server and Sender channel in second server, but in the Receiver channel, I have the error :
    "MP: Exception caught with cause com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of as2."
    I find the error and I found the URL Error in AS2 adapter. Object not found in lookup of as2.. Its urgent..!! with the same problem, but I have the same configuration in the Party of the receiver and the Sender, the same AS2ID name, and try with the solution in the forum respect the Party name in the scenario of the Receiver, but don't work.
    My scenario is send an IDOC from R/3 to a partner with the AS2 receiver channel.
    Is my fisrt scenario with AS2 adapter. Somebody help me please with any example or with any idea about the solution to my problem?
    Greetings,
    Hervey

    I have resolved this problem, thanks.

  • IPhone 4S doesn't work with car adapter

    My wife and I upgraded our 3GS phones to 4S.  We have an aftermarket iPhone adapter in our car, I don't recall the brand, but it worked fine with our Toyota Camry sound system.  We could charge our phones and play music using the factory stock CD transport controls with the adapter.  When we plugged in the 3GS phones, we would get a message "This accessory is not optimized for iPhone..." but once the message was dismissed it worked fine, even with iOS5.  Howwever, my 4S phone does not work with the adapter.  When I plug it in it charges, but I don't get the error message and the music function does not work at all.  Strangely, my wife's 4S works fine.  The only difference is that hers is 16 GB and mine is 32 GB.  I tried removing apps and hard re-starting, to no avail.  Is it possible that the hardware connector on my phone is defective and the contacts for music playback aren't functional?  Any other suggestions?

    To update my original post, I discovered that my 4S does work with my JVC car radio when I use the Apple USB cable that I use to sync with my PC. This happens to be the cable that came with my 3GS, but it works fine to sync the 4S. I don't know whether the short non-Apple cable I had in the car is broken, or whether something about the iPhone has changed to make it obsolete. In any case, I'm back in business!

  • Problem with Lightning Adapter after update to IOS 8.1

    Dear all,
    last week I updated the Iphone 5S of my wife with IOS 8.1 since that time we can not connect the B&W Bowl via lighning adapter (Original Apple).
    Before never any problem. I have the new Iphone 6 but IOS 8.02 and no any problem with same adapter to connect the B&W Bowl.
    I also checked in my car same problem with IOS 8.1 we can not connect but with 8.02 no problem.
    I contacted the Apple support and it looks it´s a problem with the new IOS 8.1.
    Does anybody have the same problems with the connection to Docking Stations etc ?
    best regards
    Jens

    measure the speed with speedtest http://www.speedtest.net
    and maybe contact your carrier

  • New iPad with retina display with 30 pin connector mirroring to TV with dvi adapter problems after software update

    Hi. Good day to everyone my New iPad with retina display 30 pin connector will not mirror to TV even with divi adapter after software update. Adapter works fine. Or is it a software glitch with IOS 7.04? I've tried resetting and reconnecting nothing seems to work.

    That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
    So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
    But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...

Maybe you are looking for