BPM with Solution Mananager - how to start?

Hi,
i have to work out how to monitor business processes with sap solman for a student research project. My problem is, that i don't know how to start.
Could anyone please help me?
Sol.Man. is already configured (earlywatch, system monitoring) but there are no business processes added.
Best regards,
Tim

Hi Tim,
You can follow the steps:
1. Go to DSWP and select your solution.
2. in Solution landscape click Solution landscape maintenance.you can see the solution directory here.
3.here you have to add logical components which includes systems in your landscape.
4. in solution structure expand the tree and click on Business scenerios.
5 here only you can define your scenerios i.e you can name the scenerios according to your requirement or you can select the scenerios from BPR at the source tab.
as soon as you save it your business scenerio will be created.
in those business scenerios similarly you can define business processes and process steps also.
https://websmp110.sap-ag.de/~sapidb/011000358700004941242004E.sim
you can refer this link it provides you the tutor for creating business scenerios step by step.

Similar Messages

  • Lost a hard drive with all photos, how to start over?

    Hi. Please help if you can.
    A while back, I plugged my external hard drive into my ibook and uploaded all my photos. A few months ago, that hard drive died. It no longer exists. But now, whenever I ope n Iphoto, I get a message that says, "could not mount drive [x]." I click OK, but it still won't do anything.
    I have tried to import all my photos again, and it will import a few but then gives me the same message: "could not mount drive [X]." I have to click OK after every couple of photos. Since I have a couple of thousand photos, this is impossible. And even when I try to mount just a few, it gives me that same message, and just freezes up. I have to force quit to make anything happen.
    Any ideas on what I should do next? I am open to uninstalling and starting from scratch, but I am not sure how to do that.

    mattcamera:
    Welcome to the Apple Discussions. Was your first library a referenced library, i.e. you didn't have the photos copied to the library when importing, or was it a managed library where the photos were copied into the library? It sounds like it might have been a referenced library.
    If it was a referenced library and you're starting over and importing your photos all over again, you should trash the old library and start with a new one so you're not trying to us a damaged database file.
    You don't have to uninstall iPhoto, just delete the old library package, create a new one and start importing again.
    Happy New Year
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • How to start ETL ?

    Hi,
    For ETL configuration i have installed and configured,
    1. Oracle 10G DB
    2. obiee and obia 7.9.6
    3. informatica server (here i created repository and integration services)
    4. DAC server 10g (setup for DAC is also configured like create warehouse tables etc.,
    same installation done on windows for client.
    Now i'm struck with ETL run
    how to start ETL, where start ETL
    Source : Oracle EBIZ R12.1.1
    target : Datawarehouse (10G DB)
    please help me out the steps till ETL start ? or provide the doc so that i can try to move farward.
    Thanks,
    Srik

    http://www.rittmanmead.com/2008/07/06/performing-initial-data-loads-into-the-oracle-bi-apps-795-data-warehouse/
    Wrong forum btw, for BI Apps go to:
    Business Intelligence Applications

  • How to start a simple program?? help

    i dunno how to start... i wanted to make a stackmat timer to my mobile phone (sony ericsson K750i),, and i don't have any idea how to do it.. can someone help me with this? thanks

    dijae wrote:
    i dunno how to start... i wanted to make a stackmat timer to my mobile phone (sony ericsson K750i),, and i don't have any idea how to do it.. can someone help me with this? thanksWhat do you mean with "I dunno how to start"?
    How much do you know and what do you want help with more specifically?
    Do you need help from the verry begining of using Java(e.g. a first hello world program) or help using JavaME for the first time? etc.

  • How to start BPM Process in Netweaver CE 7.1 from backend

    Hi,
    since 2 Month i am trying to use SAP Netweaver CE 7.1 EHP1. I found a lot about modelling of business process with process composer.
    In my company we are often using SAP Standard Programs/transaktions, thats why I want to start a SAP Netweaver BPM Process from SAP Backend. I think there are more than one way. May be someone can tel me one easy way.
    The following systems are available in my Landascape:
    - PI 7.1
    - ERP 2005
    - CE 7.1 EHP1 with ESR
    Does someone have an idea how to start the BPM Process or how to trigger start event from Backend?
    Greetings,
    Manuel

    Hi,
    Netweaver BPM process can be started in two ways:
    1. Using NWA by instantiating a process
    2. Using a Web service which trigers the Start event of the Business Process. You may find this useful:
    /people/arafat.farooqui/blog/2009/08/13/introduction-to-sap-netweaver-bpm-part-4
    Hope this helps!!
    Regards,
    Arafat

  • How to start BPM Process in Netweaver CE 7.1

    Hi,
    since 2 Month i am trying to use SAP Netweaver CE 7.1 EHP1. I found a lot about modelling of business process with process composer.
    In my company we are often using SAP Standard Programs/transaktions, thats why I want to start a SAP Netweaver BPM Process from SAP Backend. I think there are more than one way. May be someone can tel me one easy way.
    The following systems are available in my Landascape:
    - PI 7.1
    - ERP 2005
    - CE 7.1 EHP1 with ESR
    Does someone have an idea how to start the BPM Process or how to trigger start event from Backend?
    Greetings,
    Manuel

    Hi,
    Netweaver BPM process can be started in two ways:
    1. Using NWA by instantiating a process
    2. Using a Web service which trigers the Start event of the Business Process. You may find this useful:
    /people/arafat.farooqui/blog/2009/08/13/introduction-to-sap-netweaver-bpm-part-4
    Hope this helps!!
    Regards,
    Arafat

  • How to start a BPM process from ERP system

    Hi,
    I created a process in Netweaver Developer Studio with the Process Composer in SAP CE 7.1 BPM, now I want to automatically start the process by saving a SAP document like purchase requisition or purchase order. Therefore I think about implementing a UserExit / Badi or something else.
    The following systems are available in my Landascape:
    - PI 7.1
    - ERP 2005
    - CE 7.1 EHP1 with ESR
    Does someone have an idea how to start the BPM Process or how to trigger start event?
    Greetings,
    Christian

    the process by saving a SAP document like purchase requisition or purchase order.
    Based on your business process, you will have to decide what data should be sent to other system. It could be in the form of Idoc trigger or an RFC calls. If there are non-SAP systems involved, you should be using PI 7.1 too. In that case, you can communicate using Abap proxy call too. For this you may either call an RFC internally in a report and schedule it.
    Regards,
    Prateek

  • How to start installing CRM, ERP and SOLUTION MANAGER on a VM

    Dear all,
    It has been some years now that I installed a CRM and ERP system (this was in the days of dual stack ). Now I see that dual stack is depricated and that everything runs on a Netweaver base.
    My question is now the following;
    Can someone please tell me how to proceed to install these 3 SAP components on 1 server, each on its own virtual machine?
    I suspect that I will first have to install the OS (RHEL 5.6 64 bit) and then I will have to install the DB (Oracle 11.2i). After this I start the installation of the SAP component or is there someting I need to do to get the Netweaver part on the server first?
    And where can I find EXACTLY which files I need to download from the SAP site for each component, because the CRM part for instance has a ton of files and there is nowhere an indication that says '"this is the normal installation package".
    Kind regards,
    David

    > I suspect that I will first have to install the OS (RHEL 5.6 64 bit) and then I will have to install the DB (Oracle 11.2i). After this I start the installation of the SAP component or is there someting I need to do to get the Netweaver part on the server first?
    not quite right.
    You start sapinst, it will proceed a number of sections and then request you to install the database. Do not install the database before. This is also convered in the respective installation guide.
    > And where can I find EXACTLY which files I need to download from the SAP site for each component, because the CRM part for instance has a ton of files and there is nowhere an indication that says '"this is the normal installation package".
    This depends on how you use the CRM system, whether you use componnets, that require Java or not.
    All that is covered in the installation and master guides. Yes, they are big and yes, they contain a lot of redundant information. But don't expect to start a program and do next-next-finish.
    I would start with Solution Manager becaues you will need that system to generate installation keys for the other systems.
    Markus

  • How to start the Solution Manager Implementation

    Hi Gurus , I am in Solution manager implemnetation project , and i wanted built the exsisted landscape into Solman  so any one can help me out in this like where to and how to start.

    Hi Gurus, i wanted to implement these concepts
    Configuring Solution Manager
    Configuring Solution Manager
    1)      Solution Monitoring
    a       SAP EarlyWatch Alert
    a1      Setting-Up EarlyWatch Alerts    Y
    a2      Manually Executing Downloads    Y
    a3      Create Report and Display Session Details       Y
    a4      Save, Retrieve and Archive EarlyWatch Alert     Y
    b       Service Level Reporting
    b1      Service Level Reporting Change Mode     Y
    b2      Maintain General Settings       Y
    b3      Specify Systems and Contents for Service Level Report   Y
    b4      Select Business Processes for the Service Level Report  Y
    b5      Select Business Processes from the Business Process Monitoring  Y
    b6      Process Service Level Report Data Manually      Y
    b7      Create Service Level Report     Y
    b8      Create, Save and Archive Service Level Report Manually  Y
    b9      Process Service Level Report Session    Y
    b10     Send E-Mail Automatically       Y
    b11     KPI Calculation Y
    2       Configuring Alert Monitor
           Central System Administration (Part of ALERT Monitor)
    c2.1    MTE Classes and Attribute Groups        Y
    c2.2    Methods Y
    c2.3    Operating the Alert Monitor     Y
    c2.4    Actions in the Alert Monitoring Tree    Y
    c2.5    Selecting Nodes in the Alert Monitoring Tree    Y
    c2.6    Elements of the Alert Monitor   Y
    c2.7    General Properties of Monitoring Tree Elements  Y
    c2.8    Properties of Monitoring Objects and Attributes Y
    c2.9    Customizing the Alert Monitor   Y
    c2.10
    Changing Properties in the Alert Monitoring Tree
           Y
    c2.11
    Changing Properties in Customizing Transaction RZ21
           Y
    c2.12
    Triggering a Heartbeat Alert if No Values Are Reported
           Y
    c2.13
    Changing the Frequency of Method Execution
           Y
    c2.14   Defining, Releasing, and Transporting Methods
           Y
    c2.15
    Assigning Methods to MTE Classes or Individual MTEs
           Y
    c2.16   Assigning Methods to MTE Classes or Individual MTEs     Y
    c2.17
    Editing Monitors and Monitor Sets
           Y
    c2.18
    Creating and Editing Monitor Sets
           Y
    c2.19   Transporting Monitor Sets and Monitor Definitions       Y
    c2.20   Copying, Renaming, and Deleting Monitors        Y
    c2.21   Creating and Changing Monitors  Y
    c2.22   Rule Node: Rule Description and Use     Y
    c2.23   Defining Monitors with the DEFINE_R3_SYSTEMS/GET_MTE_BY_CLASS Ru        Y
    c2.24   Defining Monitors with the Rule GET_MTE_BY_CLASS_AND_OPTIONS    Y
    c2.25   Defining Monitors with the Rule GET_MTE_BY_CLASS_AS_VIRTUAL     Y
    c2.26   Copying a Monitoring Properties Variant Y
    c2.27   Create Monitoring Properties Variant    Y
    c2.28   Change Monitoring Properties Variant    Y
    c2.29   Activating a Monitoring Properties Variant      Y
    c2.30   SAP-DEFAULT     Y
    c2.31   Creating a New SAP-DEFAULT Variant      Y
    c2.32   Monitoring Multiple Systems     Y
    c2.33   Monitoring Multiple Systems: Defining RFC Connections   Y
    c2.34   Monitoring SAP R/3 3.x Systems  Y
    c2.35   Creating the CSMREG User        Y
    c2.36   Monitoring Multiple Systems with an Identical System ID Y
    c2.37   System Groups in the Alert Monitor      Y
    c2.38   Deactivating and Reactivating Monitoring Tree Elements  Y
    c2.39   Deleting and Restoring Nodes in the Alert Monitoring Tree       Y
    c2.40   Display Options of the Alert Monitor    Y
    c2.41   Saving and Resetting the Layout of a Monitor    Y
    c2.42   Extending the Shared Memory Area        Y
    c2.43   Setting Up a Central Data Cache         Y
    c2.44   Configuring the Caches of the Monitoring Architecture   Y
    c2.45   Working with All-Clears (Green Alerts)  Y
    c2.46   Displaying the History of the Threshold Values of Performance No        Y
    c2.47   Availability Monitoring with CCMSPING   Y
    c2.48   Installing Availability Agent CCMSPING  Y
    c2.49   Changing the Monitoring Frequency and Timeouts of CCMSPING      Y
    c2.50   Adding Systems to the Availability Monitoring Manually  Y
    c2.51   Finding and Correcting Errors with CCMSPING     Y
    c2.52   Configuring Availability Monitoring     Y
    c2.53   Creating and Changing Monitoring Rules  Y
    c2.54   Changing Monitoring Setting of Servers and Groups       Y
    c2.55   Using Multiple CCMSPING Agents  Y
    c2.56   Creating and Changing a Monitoring Pause        Y
    c2.57   Monitoring System Groups with CCMSPING  Y
    c2.58   Availability and Performance Overview Monitor   Y
    c2.59   Monitoring Log Files with CCMS Agents   Y
    c2.60   Structure of the Log File Template of the Log File Agent        Y
    c2.61   Example Log File Templates      Y
    c2.62   Logfile Monitoring Monitor      Y
    c2.63   Monitoring Selected Processes with SAPOSCOL     Y
    c2.64   Monitoring Response Times of Transactions or Clients    Y
    c2.65   Monitoring Database Tables with the Alert Monitor       Y
    c2.66   Self-Monitoring of the Alert Monitor    Y
    c2.67   Selected Alert Monitor Methods  Y
    c2.68   Forwarding Alerts to Alert Management (ALM)     Y
    c2.69   Interpreting a Text Attribute as File Name/URL and Display Content      Y
    c2.70   Displaying a Subtree as ALV Grid Control        Y
    c2.71   Defining an Automatic Alert Notification        Y
    c2.72   Auto-Reaction Method: Execute Operating System Command  Y
    c2.73   Setting Up Central Auto-Reaction Methods        Y
    c2.74   Installing CCM4X        Y
    c2.75   Activation in the background,if the Host restarts       Y
    c2.76   Creating RFC Connection Y
    c2.77   Copying File from Solution manager to agents    Y
    c2.78   Copying version for SAPCCM4X    Y
    c3      Central User Administartion(CUA)
    c3.01   Create manaintain landscape     Y
    c3.02   Creating RFC    Y
    c3.03   Create Logical clinets in SM1   Y
    c3.04   Field distribution parameters   Y
    c3.05   Transfering users from child system     Y
    2       Service Desk
    a       Set-Up Message Creation in Web Browser  Y
    b       Create support messages with NOTIF_CREATE       Y
    c       Process Messages in Service Desk        Y
    d       Search for Solutions to Support Messages        Y
    e       Copy Support Message into Solution Database     Y
    f       Forward Support Message to SAP  Y
    g       WebClient Interaction Center    Y
    h       Create Messages with Interaction Center WebClient       Y
    i       Process Messages in the Interaction Center WebClient    Y
    j       Service Desk for IT Service Providers   Y
    k       Using an External Service Desk  Y
    l       Connect an External Service Desk        Y
    m       Service Desk Customizing Error Analysis Y
    it's very high prioriety
    Cheers

  • How to start a application with a login window?

    hi there
    does anyone have any idea on how to start an application with a login window? a login window is the first frame or window to be displayed when an application starts running. and only correct login id and password have been entered the real application will start. any sample out there? thank you.

    You can start a new thread by making a thread object and passing it an implementation of a runnable object. Runnable has just one method, public void run(), this is was gets executed in a second thread. perhaps the code you would use would look something like this.
    <code>
    // set up thread for login window
    new Thread(new Runnable() {
    public void run() {
    // construct your login window here
    // when you are done processing the
    // password....
    if(goodPassword) {
    authorized = true; // a global variable
    notifyAll(); // don't forget this
    else {
    System.exit(42);
    }).start();
    // control does not stop this code gets executed while
    // the above thread is running.
    // Set up main program here. This is done in the
    // backround.
    while(!authorized) {
    synchronized(this)
    { wait(50); }
    // now when the user logs in this frame pops
    // up real quick.
    myFrame.setVisible(true);
    </code>
    Hope you can figure it out.. good luck :)

  • I have a long-existing iPhone 4s with one apple id and started a job where I received a macbook with another apple id. how do i get my phone to sync with the Mac Pro and secondly how do i get my music on there?

    i have a long-existing iPhone 4s with one apple id and started a job where I received a macbook with another apple id. how do i get my phone to sync with the Mac Pro and secondly how do i get my music on there?

    No not bothered about sycing apps etc it is all about calendars and maybe notes. IN terms of how its done I just want it the easiest way and preferably so that if an entry is made on one calendar then it populates the other.
    Thgius is beacuse I have my work diary on outlok, which I then link with my ical. I want to make sure that information is then shared with her.
    Chris

  • How to setup CCMS with Solution Manager

    Hi, All
    My question is how to setup or satallite connection with Solution manager 4.0 for CCMS alerts
    Is that RFC connection using both sites, trusted and satellite system ?
    I would like to setup CCMS alerts through Solution manager and R/3 ccms
    please anyone has some guide or URL or any idea send me
    We are using SAP NW 2004 620 4.6C (SLD=DV,QA,PR) and solution manager 4.0
    Thanks in advanced
    J
    Edited by: issue2008 on Sep 19, 2008 12:13 PM

    you need to install CCMS agents(sapccm4x, sapccmsr) on satellite systems & configure them with the central system(solman).

  • How to start with JDeveloper?

    As a straight A student of Computer Science, I put my hands on database development of an information system project for our CS faculty this summer. JDeveloper is used as the IDE for such project.
    I have learnt Java 2 and something about Oracle database in my courses. Now, after reading the product introduction and a short online course outline in iDeveloper2001, I have a brief idea about it. But since I can not afford much, how to learn more about it? Could you offer me some advices?
    Thanks a lot!

    The online users guide and documentation is the best place to
    start to learn how to use JDeveloper.
    - PSW
    Ram Purushothaman (guest) wrote:
    : Hi,
    : I am new to this Jdeveloper. I need to develop a intranet
    : project. Basically, I have to get the employee details from the
    : HR like work-telephone, email-address, etc.
    : Can somebody let me know how to start with Jdeveloper.
    Basically
    : I need to have a query screen (query by last_name or first_name
    : etc) and a result screen (results based on the query).
    : Any help is appreciated.
    : Thanks.
    : Ram.
    null

  • How to start with Card programming !

    Hello,
    I want to learn card programming. For this i want to know few things.
    1) Where can i find an IDE to write program ?
    2) Do we get any simulator in it ?
    3) How to compile and run the card program.
    Right now i can not buy a reader or card. Just want to develop in simulator. How to start ?
    Please, help me. I do not know anything about it.
    Thanks,
    Abhijit Chandekar

    I want to learn card programming.http://developers.sun.com/techtopics/mobility/javacard/articles/
    Read "An Introduction to Java Card Technology" Part 1 to 3 for starting with java cards.
    1) Where can i find an IDE to write program ?The JCOP tools plugin for Eclipse is the cheapest IDE i know.
    http://www.zurich.ibm.com/jcop/products/tools.html
    2) Do we get any simulator in it ?Use CREF from the Java card development Kit or the JCOP emulator from the JCOP tools.
    3) How to compile and run the card program.See the Java Card Development Kit User&#8217;s Guide that comes with the Java Card JDK.
    @the other forum member:
    May be we should start creating a forum-FAQ which will be posted once a week. That would make it easier to help all the "newbies"...
    Someone interested?
    Jan

  • How to start with Oracle Endeca tool

    Hi All,
    In my project, i got a chance to work on Endeca application support activities.
    I am basically Java and ADF developer. I am new to Oracle Endeca.
    Can someone guide me, how to start and where to start to learn Oracle Endeca searching  application.
    I appreciate if you can share docs or blog-spot or forums links.
    Thanks & Regards,
    Konda

    Konda,
    Endeca has few different products. Find out which product which version you are using. Then start with 1. Endeca-Concepts Guide, 2. Endeca Getting Started Guide (of your product), 3. Endeca MDEX Engine Basis Developer Guide. After these 3 based on what your requirement is you will be able to figure out which next document to pick.
    HTH,
    Pankaj.

Maybe you are looking for