BPM with waiting status in MONI
hi forum ...
in a fille to file scenario...with BPM.....
there are two receivers and 1 send step....
its like receiver1-->receiver2----->send1
when the scenario runs.......it receives a particular message for "receive2".....which i cant provide right now.......so the sxmb_moni shows a waiting status .....means a clock like signal......
how can i stop the BPM instance in waiting loop
is there any time out after which the BPM instance ll stop automatically
<<you have configured a terminating event>>
but i cant provide that condition due to some reasons......
<<SWIA to complete the workflow manually>>
how to do that...can u elaborate
Similar Messages
-
HT204406 How can i get tracks with "waiting" status to upload to itunes match.
I have completely cleared my library and started again. i have 24000 tracks in library but only 15000 + are uploading. leaving a further 6000 or so with a "waiting" status. i have tried the update itunes match option which runs through the full process and on completion is still leaving the tracks with "waiting" status.
any ideas??I have the same issue, although I only have about 2500 tracks and half of them are in waiting. I read a few other peoples issues with this problem and checked and found that all the songs (or whatever it is) are not in the folder they were in, in fact they are not on my computer anymore! They are still in the cloud i guess, well the information is, but the songs arent. So now I have to go back and re-import all the CD's that are missing. I did reinstall itunes before this happened which probably had something to do with it, but whenever I tried to update itunes match it would freeze my computer and give me an error. So I reinstalled and now it works but half my music is gone! and alot of it was not on CD, I had gotten online, but when I go to check purchases/downloads available, it says everything that can be has been. It ***** because it takes so long and I know I have lost some of the songs since I got them online and dont have a hard copy. But basically you need to check to make sure the files are in the folder that itunes is looking in, and that they are ON your computer or server. Then re-import if you have to, and update itunes match (if your using) then icloud should recognize. Ill let you know if this works for me since I am in the process of doing just that.
-
Icon status "freeze" with waiting status on iphone
update adobe through store but cant open as icon is frozen with waiting. i reset phone. - nothing! Cant even delete to re-download the app
Can you open Safari to see if your iPhone can access internet without any problems?
You can tap the app icon to pause and tap again to resume. Will it finish updating the app after that?
If the above step does not work, you may need to uninstall the app. But please be aware that the PDF documents stored locally on your iPhone will be deleted when you uninstall Adobe Reader. So uninstalling the app is the last resort.
"Cant even delete to re-download the app" -- I assume that you've already tried to long press the app icon to remove it.
Here's another way to uninstall an app.
Go to iOS Settings > General > Usage.
Tap the app that you want to uninstall. In this case, it's Adobe Reader.
Tap Delete App.
Let us know if it works for you. -
BPM(with wait step) calling another BPM
Hello,
I have this scenario whereby i need to call a BPM from another BPM process. Call it BPM1 and BPM2. BPM1 will have a Sync-Send-step to call BPM2.
The following is what i have setup:-
Working OKAY:-
BPM1 (receive from file, send syn step to BPM2) --> BPM2(receive step (Open S/A Brige) from BPM1, send step (Close S/A Bridge))
But if i put an wait step (for 1 minute, see below) before the send syn step in BPM1, i will have problem and the queue in BPM1 show "STOP" and the BPM2 queue show "RETRY".
Problem:-
BPM1 (receive from file, wait step, send syn step to BPM2) --> BPM2(receive step (Open S/A Brige) from BPM1, send step (Close S/A Bridge))
Yes, the RETRY will work but the problem is, my BPM1 has already timeout and has ERROR (see from SWWL) and BPM2 has exceptional error in the Close A/S Bridge send step (because it can't send back to BPM1).
Anyone has any idea how to resolve this? and hopefully the above is clear enough to discribe the problem that i'm facing now.
Any suggestions are welcome, scott.The minimum BPM-wait duration is 1 min and cannot be decreased below that....
-
How to cancel processed messages with acknowledgement waiting status
Hi All,
Messages processed successfully in Integration Server but messages still waiting for acknowledgement. I want to cancel these messages.Will u please let me know how to do delete these messages.I already canceled messages with status to be delivered in Integration Engine and Adapter Engine. But in SXMB_MONI, messages are processed successfully with waiting status.Please suggest how we need to cancel them.
Please Suggest some possible solution.
Regards,
Kanisha Sharma
Edited by: kanisha on Jul 2, 2010 8:28 AMHi,
Thanks for your reply.Yes it is an IDOC based scenario. But Idoc is in outbound side. Idoc processed successfully in ERP as well as PI processed successfully to MDM.Messages processed successfully in SXMB_MONI but once imported in MDM IS, then acknowledgement will be send to PI.My issue is:- MDM server is down and i want to cancel these messages.
Please suggest
Regards,
Kanisha Sharma -
Download hung in waiting status
I have multiple applications I'm trying to download but they are all hung with "waiting" status. I can't delete them because they don't have the little "x" in the corner when I try to delete them. Any suggestions?
Never mind. I saw a tip on the iPhone and I reset the network settings and it cleared my problem.
-
I'm trying to download a audiobook I got this morning with iTunes. However, the book is frozen on "waiting" status, what is the audiobook "waiting" for?
Hello Jose,
I would be concerned too if the audiobook I purchased from iTunes was not downloading on my iPhone. I have a few suggestions to get it downloaded to your iPhone.
First, I recommend checking to see if the download was interrupted:
If your download was interrupted using your iPhone, iPad, or iPod touch
From the Home screen, tap the iTunes app.
For iPhone or iPod touch, tap More > Downloads. For iPad, tap Downloads.
Enter your account name and password if prompted.
Tap the blue download arrow to resume.
iTunes: How to resume interrupted iTunes Store downloads
http://support.apple.com/kb/ht1725
If the audiobook still does not download, I recommend signing out and back into the iTunes Store on your iPhone:
Changing your Apple ID account
Tap Settings > iTunes & App Stores, then tap the Apple ID signed in.
Sign out of the current Apple ID account and then sign in with another account or create a new Apple ID.
The last step states to sign in with another account, but for the situation you described, I recommend just signing in with your same Apple ID.
You can find the full article here:
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/HT1311
If you are still not able to download the audiobook, you can report an issue with this purchase using the steps in this article:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/ht1933
Best,
Sheila M. -
Messages stucked in moni with queue status as "RUNNING"
Hi All,
Few of messages stucked in moni with queue status as "RUNNING" from the past 6 to 7 hours. all the stucked messages running on same dialog instance app server 03 (ucobpi03_PIP_03). i checked PIP appserver its working fine.
Can any one please expalin me how to clean the queues..is there any effect of other queues ?
Thanks,
Siva.Hi,
it can be due to multiple reasons....
check the interface logic built ...it can be either due to this or can be of large volume of data...
Also check the queues have been registered or not...
HTH
Rajesh -
My BDOCs(transaction smw01) are all waiting with yellow status
I don't know why my BDOCs(transaction smw01) are all waiting with yellow status. Shouldn't they be automatically transfering data to my data source. If i manually process the BDOC then data goes to the datasource which can be seen via transaction RSA3. Help?
Hi Kaushal,
I am also facing the similar problem as Prakash, I don't know why my Bdocs are all waiting with yellow status in smw01.I followed your steps but in SMOHQUEUE the status of the queue demon is Hold because of this the status of Bdocs are yellow.If yes would you pls tell me the steps to turn it to green.If i manually do(Reprocess or register that queue in smqr) everything is working fine but is there any way we can turn Bdocs from yellow to green automatically.I appreciate it in advance. If you find any doc. pls fwd it to [email protected]
Thanks a lot
With Regards
Nagamani. -
My BDOCs in CRM are all waiting with yellow status
I don't know why my BDOCs(transaction smw01) are all waiting with yellow status. Shouldn't they be automatically transfering data to my data source. If i manually process the BDOC then data goes to the datasource which can be seen via transaction RSA3. Help?
Message was edited by: Prakash Singhhi Prakash,
again oss note 692195-FAQ: Sales Analytics and CRM-BW data Extraction ?
bwa5 and bwa7, delta is activated ?
and initialization performed in bw ?
626214 619122
3. If there are queues in SMQ1 with erroneous status then activate
these queues.
In Transaction SMQ1 if there are Queues existing with
names beginning with CRM_BWAn (n is number) then
activate these queues in the same transaction.
4.a)If required activate the datasource
Go to transaction BWA5 > select the required datasource and
activate.
4 b) The Delta may not be active ,activate the delta in BWA7 by
selecting the name of the datsource and pressing the candle icon for
'activate delta'.
Symptom
There may be problems or issues related to data tranfer from CRM to BW.
Other terms
CRM-BW extraction,upload,initial,delta,full upload ,Sales Analytics,
Reason and Prerequisites
There could be errors in customization or program errors due to which
data may not be transferred or incorrectly transferred to BW.
Solution
Question 1 : The Extraction from CRM to BW takes a very long time. What
can be done? (Performance Issues)
Question 2 : On executing transaction RSA3 I get records but I find 0
records when I load data from BW request.(No Data Available).
How can I extract data in this case?
Question 3 : The Deltas for my data source are not extracted . What can
I do?
Question 4: How can I extract the fields, which are not provided in the
standard data source extraction ?
Question 5: I am unable to extract user status correctly.What should I
do?
Question 6 : What can I do when the activity/Opportunity/Complaint
reasons(Code,CodeGruppe,Katalogart) are not extracted?
Question 7: What can I do if the deleted opportunities
are not reflected in BW?
Question 8: How do I activate the metadata?
Question 9: I donot get any records for the delta upload of my attribute
datasource(s).What is to be done?
Question 10: What do the status BWSTONESYS0 , BWSTONEUSS0,BWSTTECSYS0
and various other BW status mean ?
Solutions
Question 1 : The Extraction from CRM to BW takes a very long time. What can be done? (Performance Issues)
Suggestion 1: Please implement notes 653645 (Collective note) and
639072(Parallel Processing).
The performance could be slow because of the wrong control parameters
used for packaging.
You can change the package size for the data extraction.
Also note that changing the package size in the transaction SBIW
would imply a change for all the extractors. Instead, you could
follow the path in the bw system.
Infopackage (scheduler) > Menu 'Scheduler' > 'DataS. default data
transfer' > maintain the value as 1500 or 1000(This value is variable)
The package size depends on the Resources available at the customer side
(The no of parallel processes that could be assigned =
1.5 times the no of CPU's available approx.)
Question 2 : On executing transaction RSA3 I get records but I find 0
records when I load data from BW request.(No Data Available)
Suggestion 2: First check if there are any entries in the table
CRMD_ORDER_INDEX.Only if there are entries in this table you can
extract records.
If this is not the case then,
It is possible that the user does not have sufficient
authorities for extraction of the relevant objects.
Additionally, please review and implement the following notes
615670
161570
150315
618953
If you are in the release 4.0 then
To do BW extraction with the user please see that the following
authorization object exists(display mode is enough):
CRM_ACT, CRM_OPP, CRM_LEAD, CRM_SAO, CRM_SEO, CRM_CO_SE, CRM_CO_SC
CRM_CO_SA, CRM_CON_SE, CRM_CMP, CRM_ORD_OP, CRM_ORD_LP, CRM_ORD_PR
CRM_ORD_OE, CRM_CO_PU, CRM_CO_PD, CRM_ORD_PO
(all these objects are linked to transaction crmd_order).
Question 3 : The Deltas for my data source are not extracted . What can I do?
Suggestion 3: Please check the following.
Please Check if the services have been generated in transaction GNRWB.
If they are not active(not marked 'X' before their names) then activate
the services following the steps here.
Go to transaction GNRWB
Select BUS_TRANS_MSG
Select (on the right, the services) : BWA_DELTA3, BWA_FILL, BWA_queue
Press Generate.
Also check for the following:
1. The delta should have been initialized successfully.
2. Confirm that all Bdocs of type BUS_TRANS_MSG
are processed with success in SMW01.
3. If there are queues in SMQ1 with erroneous status then activate
these queues.
In Transaction SMQ1 if there are Queues existing with
names beginning with CRM_BWAn (n is number) then
activate these queues in the same transaction.
4.a)If required activate the datasource
Go to transaction BWA5 > select the required datasource and
activate.
4 b) The Delta may not be active ,activate the delta in BWA7 by
selecting the name of the datsource and pressing the candle icon for
'activate delta'.
5. In BW system
Go to transaction RSA1 > modeling > infosources > select the
infosource > right mouse click on the selected
infosource > choose option replicate datasource
Activate the infosource.
6. Go to the scheduler for the infosource > select delta in the
update >choose the option PSA only (in the Processing tab)
> start immediately
Check the entry in the RSA7 in the OLTP(CRM system)
Question 4: How can I extract the fields, which are not provided in the standard data source extraction .
Suggestion 4: Follow the steps mentioned below.
1. Enhance Extract Structure with the required fields. (Create & include
an append structure to the extract structure via transaction RSA6).
2.a) Release the fields of the append for usage. ( To do this, double
click on the Datasource and remove the flags in the column 'Hide
Field' for all fields of Append. )
2.b)If the new fields cannot be seen in the extract structure of
the transaction BWA1 then change and save the datasource, and then
activate it in RSA6.
3. Define your mappings in BADI (CRM_BWA_MFLOW) to fill these fields.
Goto SPRO .
Follow the path ->
SAP Implementation guide ->Implementation with other mySAP components ->
Data transfer to the Business Information Warehouse->
Settings for the application specific datasources (CRM)->
Settings for BW adapter->
Badi :BW adapter :Enhancement of datasources in messaging flow.
4. Replicate the new Datasource to BW.
5. Expand the Communication Structure in BW.
6. Maintain transfer Rules for the new Datasource.
7. Activate the trasfer rules and perform the upload.
Question 5: I am unable to extract user status correctly.What should I
do?
Suggestion 5 :Check the following notes
531875
616062
713458
700714
765281
Question 6 : What can I do when the activity/Opportunity/Complaint
reasons(Code,CodeGruppe,Katalogart) are not extracted.
Suggestion 6 :Check the following notes
481686
516820
603609
617411
711146
Question 7:Deleted opportunities are not reflected in BW.
Suggestion 7: Check the note 706327.
Question 8: How do you activate the metadata?
Suggestion 8:CRM BW adapter meta data has to be activated first before
it is available in the system. You can use Transaction BWA5 to copy the
meta data for selected DataSources. You can reach the transaction via
the IMG maintenance 'SAP Reference IMG -> Settings for SAP Business
Information Warehouse -> Activate BW Adapter Meta Data'. For more
information, see the documentation on the IMG activity 'Activate BW
Adapter Meta Data'. (Note 432485)
Question 9: I donot get any records for the delta upload of my attribute
datasource(s).What is to be done?
Suggestion 9: In case of attribute datasources, it is possible that the
entry for the GUID is missing in the table SMOXAFLD.
If , for example the datasource 0CRM_OPPT_ATTR is not giving deltas
then you can follow the steps:
1)If Delta process is active for the attribute datasource e.g.
0CRM_OPPT_ATTR, then stop the delta process in the BW
system
2) In the CRM system, Make the entry in the table SMOXAFLD
for the datasource with the Key
as 0CRM_OPPT_ATTR GUID 3) Save the entry.Activate the datasource 4) Check that the above entry is replicated in smoxafld_s also after this. 5) Create a transport request manually for the following object R3TR SMO4 0CRM_OPPT_ATTR
Question 10: What do the status BWSTONESYS0 , BWSTONEUSS0,BWSTTECSYS0 and various other BW status mean ?
Suggestion 10: The BW status are used to extract system and user defined
status.
The BW status are defined in the customization settings in SPRO.
Check for-> Status Concept for BP/Product/CRM objects
Here goto-> Process user status You will find the documentation attached here for the user status. Going inside the transaction you will find the status groups USS0, ZIOP,ZMOP etc. The names of the various BW status are derived from this For ex. BW + ST+ One + USS0 gives the name of the field BWSTONEUSS0 or BWST + ONE + ZMOP = BWSTONEZMOP (Master opportunity values) (which means BWST + (status group name) + status object group name) Double clicking on any of the object groups will take you to the values that these status can have . For ex. BWSTONEUSS0 in your system can have values E001 ,E002,E003,E007 which will be shown in RSA3 as BW status values 1,2,3,7, respectively.
Similarly we have Goto -> Process system status (in SPRO). Here you can get the values for the system status in exactly the same way as BWSTONESYS0(Lifecycle status) , BWSTTECSYS2 (Error) etc. In RSA3 you get the names as BW status, To know which corresponds to which status here,Goto the record list in RSA3 . Here goto Settings - Layout -Current . Right click -> Press Show technical field names . You will be able to see the BW status names and will be able to adjust the layout accordingly. -
During downloading the new version, it stops with a "waiting" status when Internet's cut happened. Since, impossible to restart or to download again. Help !
I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6. -
Hi all,
knowning that there are already a lot of posts concerning above message, I have to write an additional one as I could not find a solution on the web yet.
Situation:
Windows Server 2008 forest including empty root and two child domains, one child domain does have SCCM SP1 (central primary site WND) installed on W2k8 x64 machine including WSUS 3.0 SP1 => everything is working fine.
Second child domain also contains a SCCM SP1 server (primary site HUN) running on W2k8 x64 and is defined as child site of central site WND => everything is working fine too - except Software Updates.
WSUS 3.0 SP1 installed on both SCCM servers by creating additional web site (not using "defautl web site") and configured ports 8530 and 8531 (SSL not used!). No proxy necessary/used. All WSUS 3.0 requirements for W2k8 are installed (IIS roles)
Error:
SMS_WSUS_CONFIGURATION_MANAGER - MessageID 6600:
SMS WSUS Configuration Manager failed to configure upstream server settings on WSUS Server "xxxx0003".
Possible cause: WSUS Server version 3.0 SP1 and above is not installed or cannot be contacted.
Solution: Verify that the WSUS Server version 3.0 SP1 or greater is installed. Verify that the IIS ports configured in SMS are same as those configured on the WSUS IIS website.
wsusutil checkhealth =>OK
downloading updates from WSUS at central site (SUSDB and WSUS folder equal in size) =>OK
wsus admin console able to connect and configuration possible => OK
IIS ports configured within SMS are equal to those configured for WSUS website
SCCM config (using Configuration Manager Console) does look correct - ConfigMgr Software Update Point role properties and Software Update Point Component properties
wcm.log does report an error: (SCCM Log files at the end.)
"The request failed with HTTP status 503: Service Unavailable"
IIS log files of both websites (default web site and WSUS Administration website) do not show any errors.
Questions:
What else should I look at? (registyr, SUSDB content,..)
What exactly does happen during the attempt to configure the upstream server by the SMS_WSUS_Configuration_Manager component? I guess a SMS process tries to contact a webservice - would it be possible to debug in more detail ?
And finally - Who does know the solution ?
wcm.log:
Found WSUS Admin dll of assembly version Microsoft.UpdateServices.Administration, Version=3.0.6000.273, Major Version = 0x30000, Minor Version = 0x17700111 SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
Found WSUS Admin dll of assembly version Microsoft.UpdateServices.Administration, Version=3.1.6001.1, Major Version = 0x30001, Minor Version = 0x17710001 SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
The installed WSUS build has the valid and supported WSUS Administration DLL assembly version (3.1.6001.65) SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
System.Net.WebException: The request failed with HTTP status 503: Service Unavailable.~~ at Microsoft.UpdateServices.Administration.AdminProxy.CreateUpdateServer(Object[] args)~~ at Microsoft.UpdateServices.Administration.AdminProxy.GetUpdateServer(String serverName, Boolean useSecureConnection, Int32 portNumber)~~ at Microsoft.SystemsManagementServer.WSUS.WSUSServer.ConnectToWSUSServer(String ServerName, Boolean UseSSL, Int32 PortNumber) SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
Remote configuration failed on WSUS Server. SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
STATMSG: ID=6600 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=xxxx0003 SITE=HUN PID=2424 TID=4468 GMTDATE=Mi Jul 16 10:49:47.758 2008 ISTR0="xxxx0003" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
Waiting for changes for 59 minutes SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
wsusctrl.log (looks fine to me - is able to connect to local WSUS !):
SMS_EXECUTIVE started SMS_WSUS_CONTROL_MANAGER as thread ID 6156 (0x180C). SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 2732 (0x0AAC)
This is a WSUS Role as WSUS registry key exists. SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Found WSUS Admin dll of assembly version Microsoft.UpdateServices.Administration, Version=3.0.6000.273, Major Version = 0x30000, Minor Version = 0x17700111 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Found WSUS Admin dll of assembly version Microsoft.UpdateServices.Administration, Version=3.1.6001.1, Major Version = 0x30001, Minor Version = 0x17710001 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
The installed WSUS build has the valid and supported WSUS Administration DLL assembly version (3.1.6001.65) SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Successfully connected to local WSUS server SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Local WSUS Server Proxy settings are correctly configured as Proxy Name and Proxy Port 80 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Waiting for changes for 0 minutes SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Timed Out... SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Found WSUS Admin dll of assembly version Microsoft.UpdateServices.Administration, Version=3.0.6000.273, Major Version = 0x30000, Minor Version = 0x17700111 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Found WSUS Admin dll of assembly version Microsoft.UpdateServices.Administration, Version=3.1.6001.1, Major Version = 0x30001, Minor Version = 0x17710001 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
The installed WSUS build has the valid and supported WSUS Administration DLL assembly version (3.1.6001.65) SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Successfully connected to local WSUS server SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Local WSUS Server Proxy settings are correctly configured as Proxy Name and Proxy Port 80 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Successfully connected to local WSUS server SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
There are no unhealthy WSUS Server components on WSUS Server xxxx0003 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Successfully checked database connection on WSUS server xxxx0003 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:02 6156 (0x180C)
Waiting for changes for 57 minutes SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:02 6156 (0x180C)
wsyncmgr.log (as a result of being not able to configure upstream server I guess):
STATMSG: ID=6701 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=xxxx0003 SITE=HUN PID=2424 TID=4476 GMTDATE=Mi Jul 16 10:03:51.481 2008 ISTR0="" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_WSUS_SYNC_MANAGER 16.07.2008 12:03:51 4476 (0x117C)
Sync failed: WSUS server not configured. Source: CWSyncMgr:oSync SMS_WSUS_SYNC_MANAGER 16.07.2008 12:08:51 4476 (0x117C)
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=xxxx0003 SITE=HUN PID=2424 TID=4476 GMTDATE=Mi Jul 16 10:08:51.636 2008 ISTR0="CWSyncMgr:oSync" ISTR1="WSUS server not configured" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_WSUS_SYNC_MANAGER 16.07.2008 12:08:51 4476 (0x117C)I just experienced the exact same scenario. After much digging I found that csakg6so posted a fix at
Windoows-Noob
Run Internet Explorer as the SYSTEM account (psexec -s -d -i cmd.exe & C:\Program Files\Internet Explorrer\iexplore.exe)
Go to internet options
Go to conections
Go to LAN settings
Uncheck all boxes
The original post said to reboot, but that wasn't necessary for me.
After initiating a manual Software Update sync the WCM.log and WSyncMgr.log errors do not return and new updates are synchronized. -
JDBC receiver in "waiting" status
I have a scenario where Idocs pass records through XI to 10 JDBC receivers (SQL to be specific).
The records are being inserted into all 10 database tables successfully, but in Runtime Workbench, the first receiver has a successful message, but the other 9 receivers go into "Waiting" status. After 3 retries, they go into "System Error" status (but for each retry, the records are inserted again into the tables, ie: I end up with 4 of the same records in the tables).
Runtime Workbench gives me the following error:
MP: Exception caught with cause com.sap.engine.services.ejb.exceptions.BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback.
Exception caught by adapter framework: Exception thrown in method process. The transaction is marked for rollback
The message status set to WAIT.
Delivery of the message to the application using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Exception thrown in method process. The transaction is marked for rollback.: com.sap.engine.services.ejb.exceptions.BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback..
Can anyone help?HI,
Did you check the Retry option set for these Adapters? if not check it in the Visual admin for the JDBC Adapter
If feasible try re-look the Design. Instead of using 10 different Adapters accessing same database, you can try with one Stored Procedure so that Database hit will be minimized and hence the queue problems.
Rgds, Moorthy -
Java Proxy message in waiting status
Hi,
Let me explain my case, In our Integration Scenario we have configured an Inbound Java Proxy as the How to guide (HOW TO WORK WITH JAVA PROXIES) expain, but the proxy doesn't hava code, that is, it have the code by default when its created, and when we register it and the scenario runs, in the message monitoring the status of the message to the JP Business Service is in WAITING status, and in the details it says sometimes that an old reference to another JNDI name of bean is doesn't locate or the message "MessageSpecifier could not be reset".
Remember, the Imp. class has only the default code and the scenario is JDBC --> XI --> JavaProxy
Any ideas?Hi Hector,
Status: WAITING
The message had been sent and it is failed and is currently waiting for another attempt.
Solution :
When the fist attempt to deliver the message has failed (a recoverable exception arose), the message is usually rescheduled and the status is updated to WAITING. As long as the message is in this status, the Messaging System retries to deliver the message according to the configured retry settings (default 3 tries).
Regards
Agasthuri Doss -
SRM PO Workflow (BADI Type) in waiting status
Hi all,
I am in SRM extended classic scenario. After shopping cart gets created, it gets automatically approved and PO is created. Then PO workflow is triggered for approval. This happens fine in development box. However when its been transported in quality, the PO workflow remains in 'Waiting Status'. The requested start date has been set to future date 31.12.9999. Thus the workflow does not start properly. If gets stuck with the first step. It does not go upto the approval step.
Is there anyone who can tell me why this is happening and what is the remedy?
Regards
DipHi Dipankar,
Is it required to set the requested start date to future date 31.12.9999?
Also check if the same has been maintained in development system.
I think this might be restricting the workflow to proceed. Please check the relevance of this deadline monitoring.
Regards,
Saumya
Maybe you are looking for
-
How to back up/import my photos when I have saved them messily?
I currently use Aperture as follows: 1.Save from memory card to file on computer called photos (each card is labelled seperatley in a sub folder) 2.Import photos I want to manage into aperture (this then makes duplicte copy of the photo in my apertur
-
There is a specific website that does not download, but it is not the site since it can be viewed on my iphone and imac. Does somebody know what to do?
-
How a java program is executed ?
Hi, I would like to understand what a java program calls at first. Is it the main() ? Is it the same as C++ ? Is it different for an applet? thanks djb
-
Javascript slideshow won't play in Safari, will play in Firefox
We have created a JS slideshow at the weblink below. It plays in Firefox, but not in Safari. Does anyone have a clue why Safari does not like this? http://www.uaf.edu/asra/modules/aviation/ Thanks! Jeff Mac Pro, iBook Mac OS X (10.4.7) Mac Pro, iBook
-
Display Javascript array value OnChange instead of Bean value
I intially loop through a collection of employees display the values within the employee loop I have a select statement that i loop through a collection of programs that has on OnChange. I want to display the javascript value instead of the bean valu