BPM Workflow Help Needed Urgently please

Hi All,
We are working on a BPM workflow
User A submits the request which goes to User B for review if rejected by user B the process stops but if approved then the amount is calculated using a decision table and based on the amount it will be routed to the respective users.
I did it till BPM part and created rules in the BRM part as well but dont know how to call this BRM in BPM.
Please help me its very very urgent.
Thanks in advance

Refer step 25 of this document to see how to create a web-service for your BRM ruleset.
Once the web service is ready, it can be imported anywhere for use.
1. In your BPM, right-click on the 'WSDL' folder and select 'Import WSDL'. You can import your BRM web-service here.
2. Then place an automated activity in your BPM process design and set the BRM service as the Service Reference property of the Automated activity.
3. Once this is done, you will see the Condition and Action values of your BRM decision table in the Input and Output mapping of the Automated Activity.
4. Map the values of BPM process context to the BRM condition values in the 'Input Mapping' and get the corresponding output in Output mapping (Action Values of decision table).
Refer step 12 in this document to see how to import a WSDL in your BPM Process.
Hope this helps.

Similar Messages

Workflow help need urgently in Material Master creation

hi All
I am trying to create a Workflow for creating Material Master views in ECC6 system . Initially Basic data 1 and basic data 2 is created by user and then my workflow is trigerred for subseuqent views .For e.g i need to route the workitem to a user to fiill in Purchasing data and then to another user to fill in accounting data after basic data 1 and basic data 2 is created by so called super user. I was trying to use business object BUS1001006 for this using method CREATEVIEWS but i am getting stuck here with using this method . I dont know how to use this method so that once the user clicks the workitem it should directly go to Puchasing tab view or Accounting tab view (depending on the kind of user currently accessing the workitem).
Any idea how to solve this problem ? It would really be helpful for me
Thanks for your help in advance

1. I have entered transaction OMS9
2. Entered the Field selection group as 2
3. Below the fields option 3 RM03M-WERK280 (Plant) i double clicked and checked there is hide option.
4. I came back selected the T001W - Name1 (Name) I double clicked that in 34 , 35 , 54 was enabled with hide i changed to opt entry but still it seems to be the same.
5. I came back again and below in the field selection tab checked for the MM01 and MM02 transaction as well as fert,halb,roh as opt entry
It did not work.Kindly guide me if there is some other option available for this to revoke the plant option.
Any help would be really appreciatable.
Regards,
Deepak GS

Zoom problem(help needed urgently please )

friends,
i m working on a class in which there is one JPanel inside a JInternalFrame. i have functionalities like zoomin and zoomout. for that i m writing my code on mouse clicked of JPanel but my problem is that mouseClicked method is getting called several times even if i click once on JPanel and thus zooming the JPanel by a very large value.
please help me if u have any solution for it.Its very urgent.

You are still crossposting.
It would be a waste of everyone's time to answer you here, since quite likely others have already helped you elsewhere.

Design pattern help need urgently please

Hi I need you to tell me if the following code looks like its a facade or not?
The method make the table calls another method in the class project4
which contains instances of itself and student class and supervisor class and the method prints out data from these classes.
Iv to hand this in tomorow and would like to know
Is that a facade or not?
Please help
public class TableFacade
     TableFacade()
     System.out.println("This is the table of projects");
     public Project4 makeTheTable()
          Supervisor5 sup = new Supervisor5();
          Project4 project =new Project4();
          project.readRelevantProjectsFromFile(sup);
     return project;
}

Sorry to be continuously replying but desperate times call for desperate measures anyway
Im trying to adapt from my project4 class
is this in the adaptor pattern?
class AdaptProject
     Project4 project;
     Supervisor5 supervisor;
     void readProjectDetails()
          project.readProjectDetails();
     void readRelevantProjectsFromFile(Supervisor5 v)
          project.readRelevantProjectsFromFile(supervisor);
     String projName()
          return project.projName;
     String projSubject()
          return project.projSubject;
}

High CPU usage on all cores by ntoskrnl.exe? Help needed urgently Please.

ntoskrnl.exe, system, has multiple cores running with high usage, locking up my system when using programs.
After looking through the forums I did the following:
I ran
sfc /scannow but nothing found.
I used process Explorer to find that the system has a thread <ntoskrnl.exe!TtlSid HashLookup+0x 1ffc> that
is using up 40+% of all four cpu cores. Looks like a driver fault with 8.1, but cannot pinpoint the device. Any clues msg me.
I have created an etl file that contains usage data. this is present here:
https://dl.dropboxusercontent.com/u/8554814/highCPUUsage.zip
Would be a lot of help if this can be resolved. please help.

forgot to ask, may I know your PC model?
mostly is related to the network, networking software, or software which need internet connection
did you already updated all the network driver?
is there any networking software or downloaded software? may I know your antivirus status? firewall?
try clean boot and go to safemode to check, choose safe mode only, safe mode with networking and normal mode without internet (unplug cable or disconnect Wifi)

Help needed urgent please ( parallel port access in linux)

hi all, i am trying to read and write data to /from the parallel port , i am running IBM j9 vm on linux.under /dev there are lp0..lp3 parport0..parport3, and port devices , i dont know which one to use , i have tried all , they all return with an ioexception saying "cannot find the file" except for port device which does not generate any error but it does not return what i have written on it ,
any help would be much appreciated.
i am using fileoutputstream and printwriter calsses .
i dont want to use javax.comm api cause i think its incompatible with ibms visual age micro edition ( the one i am using ) so i would prefer something that works with my IDE .
thanks
yahya
[email protected]

However, there is an on-going OpenSource version called "RXTX" (http://jarvi.ezlink.com/rxtx/) that works quite well. Be sure to read all the documentation that comes with it, as you'll need to set some permissions on the ports you want to use.

Help needed urgently please!!!!!!

hi
there i am running windows xp pro 64 bit . Using Premiere Elements7. when i connect with firewire to load video from camera it all looks impeccable on screen as it loads. Once i stop loading and Premiere renders it (i guess) all of a sudden the video looks granny and pixalated and stays that way even after i export it on dvd.Hope spme one can help me please.Thank you in advance.

i have a Sony hvr-hd 100u i shot the video in dv mode i dont understand why
it gets granny after i load it onto PE7 i hope u can help me figure this out lol
thanks again

Nokia 6300 help needed urgently please

My friends 6300 phone has been trodden on by a large horse and has since stopped working - well it would really. But unfortunately she had not got the connectivity package for her laptop and had saved all the info on her phone rather than her sim. I have tried connecting it to my software but it comes up with USB device not recognised. My own 6300 and 6310 work fine so I know the Nokia pc suite is working fine. Is there any way we can get this info out she has phone numbers in there that she will never be able to get again.

i hear you, i have been in this situation many times, hence now almost neurotically i have several back up files, and online back up providers to keep my most prescious data safe. still does not change the fact that it is frustrating when things like this happen that noone couldhave predicted. hope you get it sorted out and be able to find this data in other ways.....
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

HT201210 i have an error of no 11. kindly help, needed urgently

i have an error of no 11. kindly help, needed urgently
when i try to upgrage my
iphone 3gs wit 4.1 to new latest 5.1
it gives the erorr of 11. what that mean? Reply as soon as you can !
thnx

Error -1 may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.

Some J2ME midlets doubts!! help needed urgently!!!

Hi,
I am currently working in a company where it does wireless technology like WAP and I am assigned a task of creating a screensaver midlet. I have some doubts on the midlets.
1) How do i use a midlet suites? From what I heard from my colleagues & friends, a servlet is needed for midlets to interact with one another. is it true?
2) How do I get the startin midlet to take note the phone is idling so that the screen saver midlet can be called?
Help needed urgently... if there is any source codes for me to refer to would be better... Thanks...
Leonard

indicates that MIDlet suites are isolated (on purpose) from each other, so you can't write over another one's address space.
Also, I believe (at least on cell phones) that you have to specifically enter the Java Apps mode; unless you do the app won't execute. If you are in Java apps mode and a call comes in, the cell's OS puts the Java app currently executing on "Pause" mode and switches back to phone mode.
Not sure if you will be able to have a Java app do that automatically.
BTW why do you need a screensaver on an LCD display? Is it really intended to show an advertisement?
Download and real all the docs you can from Sun, once you get over the generic Java deficiencies MIDlet's aren't that hard.

Load bar at start up, then shut down. HELP NEEDED URGENTLY!!! plss....

Load bar at start up, then shut down. HELP NEEDED URGENTLY!!! plss..

The startup disk may need repairing.
Startup your Mac while holding down the Command + R keys so you can access the built in utiliites to repair the startup disk if necessary or restore OS X using OS X Recovery

How to add Two Interface Mappings to One Receiver(BPM) Help needed urgently

I have a requirement where i get a flat file and split into multiple files and send to BPM.
For each split file I created Interface Mapping using Java Mapping Program.
In the Configuration how to add more Interface Mappings?
Thanks for your help in advance.
Regards
Sudha

You can use Enhanced Interface Determination to split one message to Multiple hence to multiple Interfaces.
You have to change the Occurance of Messages in Message Mapping and their Corresponding Interfaces in Interface Mapping. That would create Multiple Files with Multiple Interfaces to Receiver (BPM)
1) You need not to use Multilpe Interface Mapping
2) You will use Extended Interface Determination for this.
regards.
Jeet.

Help needed urgently -Had a power (electricity) failure at re-installation

I need your help in fixing this BIG problem. I had an app reset which required me to re-install my 8900 Os. In the process of installation. Having gotten to the level where it says Do not disconnect your device..
Loading JVM and the system application window
waiting for device initialization
A colleague of mine trying to resolve some issues with his printer mistakenly Pull my power cable off
I tried starting all over again but the system would not recognize the phone and could not even come up with the com port number>
the phone blinks intermittently too.
How do I resolve this issue.
Thank you

Hi and Welcome to the Forums!
Two possibilities for you:
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
http://forums.crackberry.com/f3/how-wipe-jl_cmder-53502/
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Help needed urgently on a problem..plzzz

hi..this is a linear congruential generator. I have to implement it and i need the execution time for the program.
for your understanding i'm providing an example below.
Xn=(( a* xn-1 )+b) mod m
If X0=7 ; a = 7 ; b =7 ; m=10
Then
X0 = 7
X1 =((7 * 7) + 7))mod 10 = 6
X2 = ((6*7)+7))mod 10 = 9
X3 = ((9*7)+7) mod 10 = 0
X4 = ((0*7)+7) mod 10 = 7
Now since the cycle is being repeated i.e 7 appears again�so the period is 4 coz there are 4 diff nos. i.e 7,6,9,0�..
help required urgently....your help will be appreciated...thankyou..

Hi,
I wrote the code so that it catches any cycle (not only the "big" one).
Otherwise it will enter infinite loop...
The time complexity is O(N*logN): it can do at most N iterations (here N is your 'm'), and in each iteration there can be O(log N) comparisons (since I maintain TreeSet).
Interesting issue: is it possible to supply such (x0, a, b, m) tuple such that all possible values from 0 to m-1 will be output? I think no :)
Here is the program:
package recurr;
import java.util.TreeSet;
import java.util.Comparator;
public class Recurrences {
     private static long x0, a, b, m;
     private static TreeSet theSet;
     public static void main(String[] args)
          long l0, l1, l2, l3;
          try {
               x0 = Long.parseLong(args[0]);
               a = Long.parseLong(args[1]);
               b = Long.parseLong(args[2]);
               m = Long.parseLong(args[3]);
          } catch(NumberFormatException nfe) {
               nfe.printStackTrace();
          System.out.println("X[0]: " + x0 + "\n");
          long curr = x0;
          boolean cut = false;
          int i;
          // initialize the set
          theSet = new TreeSet(new LongComparator());
          // we can get at most m distinct values (from 0 to m-1) through recurrences
          for(i=1; i <= m; ++i) {
               // iterate until we find duplicate
               theSet.add(new Long(curr));
               curr = recurrence(curr);
               if(theSet.contains(new Long(curr))) {
                    cut = true;
                    break;
               System.out.println("X[" + i + "]: " + curr + "\n");
          if(cut) {
               System.out.println("Cycle found: the next will come " + curr + "\n");
          } else {
               System.out.println("No cycle found!");
          System.out.println("----------------------------------");
          System.out.println("Totally " + (i-1) + " iterations");
     private static long recurrence(long previous)
          return (a*previous + b)%m;
     static class LongComparator implements Comparator
          public int compare(Object o1, Object o2)
               if(((Long)o1).longValue() < ((Long)o2).longValue()) {
                    return -1;
               } else if(((Long)o1).longValue() > ((Long)o2).longValue()) {
                    return 1;
               } else return 0;
}

Help needed Urgently- Rebate based on collected amount

Dear all,
I come across scenario while discussiion with client that they require rebate with collection. Details of the requirement are given below:
1. SAP rebates run on billed values & set the accrual in rebate agreement on the rate what we have specified in the rebate agreement. Requirement is that, If i have billed on 1000$ & my accrual value is 100$ with the rate of 10%. If i collected 800$ instead of 1000$, then i need to pay the accrual on the basis of 800$ not on the basis of 1000$. It means i have to adjust accrual amount on the basis of 800$. Conclusion is that i have to pay not 100$ accrual instead less then 100$ on the basis of 800$ which i collected.
2. In month 1 have billed on 5000$, my accrual amount is 500$ with rate of 10%. In the 2nd month i have to bill 1000$ and i have given an discount of 500$, it means my billed value is 500$ and my accrual amount is 50$@10%. In month 3 again i billed 500$ and my accrual amount is 50$@10%.
Requirement is that, when i am going to pay the accrual to client, i should pay correct accrual for which he is entitled for. Means i should pay 100$ accrual not 600$ because i have already given an discount of 500$. Discount which i have given already of 500$ should need to be offest with the first month accrual of 500$. So remaning accrual is 100$.
Great if somebody can help me out for the solutioning of the above requirements.

Thanks Ivano,
Somebody has started the conversation.
Let me put my questions again.
This requirement is nothing to do with Payment procedure in the agreement type.
1. In any month if i billed 1000$, so my account receivable would be 1000$. My rebate for that month is 100$ at the rate of 10%. During customer receipt if i collected against my invoice 900$ instead of 1000$, my accrual needs to be corrected 90$ instead of 100$.
I know this can not be fullfilled by standard SAP, by any thoughts on this welcomed.
2. I know Rebate can be settled partially or full settlement by payment method( by cheque, bank transfer, or by credit memo) we have configure in rebate agreement type. But here requirement is totally different.
Here, i need to pay the Rebate as a Discount instead of by cheque or by credit memo. While doing the partial or full settlement system will take into account collected accrual up to that day & apply as a discount to the final bill.
Scenario is like that sometimes customer asked to give us the discount on bill for whatever they accrued so far.
This is again cannot solved by standard SAP, but any thought by any body welcome. We have already thought that we need to enhance the solution.
Solution needed urgently.

BPM Workflow Help Needed Urgently please

Similar Messages

Maybe you are looking for