BPM worklist in custom portal server

Hello
I have extended a domain containing soa, ucm and webcenter with the custom portal template to create a custom portal server. I am trying to integrate the bpm worklist taskflows on a page here. I have managed to get the bpm taskflows in a adf app deployed on a soa server. Most of the soa libraries are targeted to the custom portal server. The page the worklist is displayed on is only displayed to an authenticated user. the page still shows up blank. No errors.
Has anyone here managed to get this working on a custom server?
thanks

We found a solution this problem in Tamer Qumhiehs blog here
https://blogs.oracle.com/webcenterportal/entry/oracle_bpm_suite_oracle_webcenter

Similar Messages

Light weight custom portal server install to run webcenter blogs

Hi,
We are running PS6 UCM, we just leverage blog service provided by webcenter for blog functionality to be implemented.
Is there lighter version of webcenter custom portal server, that we could you just to run blog service and associated (document service) components.
Any pointers in this direction would be helpful.
Thanks,
Seshan K.

"Light weight custom portal". In terms of hard drive space or CPU and Memory?.
I don't know which license do you have for WebCenter (Portal, Content etc...).
In case of having a WebCenter Portal license (for document services components) Install WebCenter (extended for WCPortal Framework Applications) and just enable the Services or components that you are going to use (like CustomPortal and UCM servers only).
Regards.

Integrate WebCenter custom with BPM Worklist

Hi,
We are developing WebCenter custom portal application and we have a requirement where in we have to pull BPM Worklist from BPM. Is it possible to integrate custom WebCenter to BPM Worklist? If yes, please advise and please provide any pointers. Thanks!
Regards,
Suneel Jakka

i got confused, are you trying to integrate BPM worklist into webcenter portal application? if so here is the good articale about the same,
https://blogs.oracle.com/webcenterportal/entry/oracle_bpm_suite_oracle_webcenter

BPM 11g : Custom BPM Worklist Application

Hi ,
I am trying to build a Custom BPM Worklist App using the instructions provided in
http://download.oracle.com/docs/cd/E15523_01/integration.1111/e10224/bp_worklistcust.htm#CIHDAABE
The tutorial talks about building a URL similar to
http://<soa_server>:8001/integration/worklistapp/TaskDetails?taskId=c848ca41-71ae-4852-b774-518e1354aa8e
in order to navigate to the specific task.
The above URL does not work for me. I get a 404 Error page.
Please help me to get around this issue.
Thanks
Rakesh

Hi,
I also face the issue to port Worklist in JSP or portal other than using adf.
I am using SOA 11.1.1.2 and using BPEL and Human workflow. I did a complete flow from JSP ->BPEL->Human worlist. Whenever i
submit a form values in JSP, it hits BPEL and i am
getting proper message list in Human worklist and wherein i can able to assign, escalate and delegate tasks.
Now i need to customize the worklist in Weblogic Portal 10g or to JSP. My requirement now is to port the Worlist default skins to jsp or Portal.
I also gone through SOA 11g developers guide and in worklist sections but no idea how to implement.
If any body knows please advise.
Thanks..
-Bharathi

How to Open BPM worklist when a link is pressed in custom ADF application

Hi Guru's
I have a requirement where i have to open BPM worklist app when a user clicks on a custom ADF application link.
Scenario
1) In custom ADF application we have a link.
2) user selects the link and we have to open the users BPM worklistapp page.
Can you please let me know if this is possible or not? If so can you please help me out
Regards,
Ram

Bill,
Can you please let me know the steps or documentation that helps me out in achieving this?
Regards,
Raju
Edited by: user080811 on Apr 18, 2013 12:12 PM

Customizing the BPM Worklist removing attachment functionality

Hi
I am still new to the BPEL but we would like to remove the attachment functionality from the BPM Worklist. We gave our users attachment functionality of our main jspx page using Frank.Nimphius solution. Hence users do not need to have the attachment functionality within the BPM worklist.
Thanks
Nick

Might be better asked on the SOA Suite forums:
http://forums.oracle.com/forums/category.jspa?categoryID=194

Customizing Reports In BPM Worklist

Hi all
I have a 11g BPM worklist. Inside the BPM worklist i find a Link called *"Reports"*,going into it iam able to find 5 reports which is defaulty available. Now my question is that how can i create my own reports inside BPM worklist. Where do i need to make changes to create my own reports other than these 5 default reports.
Thanks

The documentation has not been updated since early days of planning, I am not even sure if it is still valid as in my experience it is hardly ever used.
If you are version 11.1.2 then I would assume it would be the file in the planning product installation directory.
Cheers
John
http://john-goodwin.blogspot.com/

Task details in BPM worklist on SOA 11g could not retrieved.Experts plz adv

Hi,
This is regarding issues when I click on the Task details on the BPM worklist 11G. I am invoking a BPEL process using custom JSP and from the custom JSP form values are
sent to BPEL and from BPEL i am invoking the Human workflow.
Tech used: BPEL 11.1.1.2, RCU 11.1.1.2.1, WLS 10.3.2 and DB 10.2.0.4
I am using one jsp named "myFlow.jsp" to call the BPEL process and i can able to get the Task in worklist but i click on "Task details" , i am getting "404 error".
Note: There was no errors when i tried with ADF autogenerated form. I can able to approve, reassign and do all operations.
I got one soultion for that, i mean i have to create another custom jsp(taskDetails.jsp) to fetch the values based on the Task Id and finally i have to give that URI in EM to fetch the details.Today i created that also but i dont know how to give the URI IN EM for the task details jsp. I am refering soa developes guide also to get the API's.
My Ref: http://sqltech.cl/doc/oas11gR1/integration.1111/e10224/bp_worklistcust.htm
http://docs.tpu.ru/docs/oracle/en/owl/E14571_01/integration.1111/e10224/bp_designtf.htm
1. myFlow.jsp used - To initiate the BPEL to create a Task in worklist.(By mistake i gave this URI in EM and i am getting the same request page in the task details). Now i created another jsp which queries the task details based on the Task ID. i dont know how to give the URI in EM for this Jsp.
2.taskDetails.jsp - Used to retrive the task details based on thr Task id.
Both Jsp's are displayed below. Please advise how to fetch the task details.
worklist API provided by oracle is used to fetch only the metadata on the Task details but i have to get all the form values also in the task details that has been submitted
by my Jsp(myFlow.jsp)
Both are shown below,
*1. myFlow.jsp*
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<%@ page contentType="text/html;charset=windows-1252"%>
<%--
<%@page import="com.oracle.bpel.client.Locator" %>
<%@page import="com.oracle.bpel.client.NormalizedMessage" %>
<%@page import="com.oracle.bpel.client.dispatch.IDeliveryService" %>
--%>
<%@page import="oracle.fabric.common.NormalizedMessage" %>
<%@page import="oracle.fabric.common.NormalizedMessageImpl" %>
<%@page import="oracle.soa.management.facade.Locator" %>
<%@page import="oracle.soa.management.facade.LocatorFactory" %>
<%@page import="oracle.soa.management.facade.Composite" %>
<%@page import="oracle.soa.management.facade.Service" %>
<%@page import="oracle.soa.management.facade.CompositeInstance" %>
<%@page import="oracle.soa.management.facade.ComponentInstance" %>
<%@page import="oracle.soa.management.util.CompositeInstanceFilter" %>
<%@page import="oracle.soa.management.util.ComponentInstanceFilter" %>
<%@page import="java.util.Hashtable" %>
<%@page import="java.util.UUID" %>
<%@page import="java.util.List" %>
<%@page import="java.util.Map" %>
<%@page import="javax.xml.transform.*" %>
<%@page import="javax.xml.transform.dom.*" %>
<%@page import="javax.xml.transform.stream.*" %>
<%@page import="javax.naming.Context" %>
<%@page import="org.w3c.dom.Element" %>
<%@page import="java.io.*" %>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=windows-1252"/>
<title>myFlow</title>
</head>
<body>
<%
String ssn = request.getParameter("Name");
if (ssn == null)
%>
<h3>Invoke BPEL Application</h3>
<h4>NYC Application Form</h4>
<form>
<table>
<tr>
<td>NAME:</td>
<td><input type="text" name="Name"></td>
</tr>
<tr>
<td>NRIC Number:</td>
<td><input type="text" name="NRIC" value="12345678"></td>
</tr>
<tr>
<td>Gender:</td>
<td><input type="text" name="Gender" value="Male"></td>
</tr>
<tr>
<td>Race:</td>
<td><input type="text" name="Race" value="Indian"></td>
</tr>
<tr>
<td>Occupation:</td>
<td><input type="text" name="Occupation" value="IT"></td>
</tr>
</table>
<input type="submit" value="Submit">
</form>
<%
else
String Name = request.getParameter("Name");
String NRIC = request.getParameter("NRIC");
String Gender = request.getParameter("Gender");
String Race = request.getParameter("Race");
String Occupation = request.getParameter("Occupation");
// 3. Initiate the BPEL process here
//Locator locator = new Locator("default","bpel");
//IDeliveryService deliveryService = (IDeliveryService) locator.lookupService(IDeliveryService.SERVICE_NAME );
// Construct a normalized message and send to Oracle BPEL Process Manager
//NormalizedMessage nm = new NormalizedMessage();
// nm.addPart("payload", xml);
// Initiate the BPEL process
// deliveryService.post("myFlow", "initiate", nm);
try {
Hashtable jndiProps = new Hashtable();
jndiProps.put(Context.PROVIDER_URL, "t3://172.16.16.202:8001/soa-infra");
jndiProps.put(Context.INITIAL_CONTEXT_FACTORY,"weblogic.jndi.WLInitialContextFactory");
jndiProps.put(Context.SECURITY_PRINCIPAL, "weblogic");
jndiProps.put(Context.SECURITY_CREDENTIALS, "weblogic1");
jndiProps.put("dedicated.connection", "true");
out.println("====Got Values======" + jndiProps.get(Context.PROVIDER_URL));
String inputPay = "<nycproject xmlns=\"http://xmlns.oracle.com/NycDesignApps_jws/NycDesignComp/NycDesignProcess\">\n"
+ "<Name>" + Name + "</Name>\n"
+ "<NRIC>" + NRIC + "</NRIC>\n"
+ "<Gender>" + Gender + "</Gender>\n"
+ "<Race>" + Race + "</Race>\n"
+ "<Occupation>" + Occupation + "</Occupation>\n"
+ "</nycproject>\n";
Locator locator = null;
//http://xmlns.oracle.com/TestDesignApp_jws/TestDesignComp/TestProcess
//http://xmlns.oracle.com/NycDesignApps_jws/NycDesignComp/NycDesignProcess
// connect to the soa server
locator = LocatorFactory.createLocator(jndiProps);
out.println("Connected after Locator - Available domains==>>" +locator.getDomains());
// find composite
String compositeDN = "default/NycDesignComp!1.0";
Composite composite = locator.lookupComposite("default/NycDesignComp!1.0");
out.println("Got Composite : "+ composite.toString());
//out.println("Got Composite : "+ composite.getCompositeDN().toString());
// find exposed service of the composite
Service service = composite.getService("nycdesignprocess_client_ep2");
out.println("Got serviceName : "+ service.toString());
NormalizedMessage input = new NormalizedMessageImpl();
//String uuid = "uuid:" + UUID.randomUUID();
//input.addProperty(NormalizedMessage.PROPERTY_CONVERSATION_ID,uuid);
input.getPayload().put("project", inputPay);
Map payload = input.getPayload();
out.println("Payload : "+ payload);
out.println("input : "+ input);
// process is the operation of the employee service
//NormalizedMessage res = null;
//NormalizedMessage input1 =null;
try {
//res = service.request("process",input);
//input1=service.request("process", input);
service.post("process", input);
} catch(Exception e) {
e.printStackTrace();
out.println("Inside Catch1" + e.getMessage());
//service.post(arg0, arg1);
}catch(Exception e) {
out.println("Inside Catch2" + e.getMessage());
e.printStackTrace();
%>
</body>
</html>
*2.taskDetails.jsp*
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<%@ page contentType="text/html;charset=EUC-KR"%>
<%@page import="java.util.*" %>
<%-- <%@ page import="com.oracle.jay.WorklistClient"%> --%>
<%@page import="oracle.bpel.services.workflow.client.IWorkflowServiceClientConstants" %>
<%@page import="oracle.bpel.services.workflow.client.IWorkflowServiceClient" %>
<%@page import="oracle.bpel.services.workflow.verification.IWorkflowContext" %>
<%@page import="oracle.bpel.services.workflow.client.WorkflowServiceClientFactory" %>
<%@page import="oracle.bpel.services.workflow.query.ITaskQueryService" %>
<%@page import="oracle.bpel.services.workflow.task.model.Task" %>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=EUC-KR"/>
<title>TaskDetailsTest</title>
</head>
<body>
<%
String bpmWorklistTaskId = request.getParameter("bpmWorklistTaskId");
String bpmWorklistContext = request.getParameter("bpmWorklistContext");
Map<IWorkflowServiceClientConstants.CONNECTION_PROPERTY,java.lang.String>
properties = new HashMap<IWorkflowServiceClientConstants.CONNECTION_PROPERTY,java.lang.String>();
properties.put(IWorkflowServiceClientConstants.CONNECTION_PROPERTY.MODE, IWorkflowServiceClientConstants.MODE_DYNAMIC);
properties.put(IWorkflowServiceClientConstants.CONNECTION_PROPERTY.EJB_PROVIDER_URL, "t3://172.16.16.202:8001");
properties.put(IWorkflowServiceClientConstants.CONNECTION_PROPERTY.EJB_SECURITY_CREDENTIALS, "weblogic1");
properties.put(IWorkflowServiceClientConstants.CONNECTION_PROPERTY.EJB_SECURITY_PRINCIPAL, "weblogic");
IWorkflowServiceClient client = WorkflowServiceClientFactory.getWorkflowServiceClient(WorkflowServiceClientFactory.REMOTE_CLIENT, properties, null);
IWorkflowServiceClient wfSvcClient =
WorkflowServiceClientFactory.getWorkflowServiceClient(WorkflowServiceClientFactory.SOAP_CLIENT, properties, null);
//IWorkflowServiceClient wfSvcClient = WorkflowServiceClientFactory.getWorkflowServiceClient(WorkflowServiceClientFactory.JAVA_CLIENT);
IWorkflowContext ctx = null;
ITaskQueryService querySvc = wfSvcClient.getTaskQueryService();
ctx = querySvc.getWorkflowContext(bpmWorklistContext);
Task humanTask = querySvc.getTaskDetailsById(ctx, bpmWorklistTaskId);
out.println("<br>Task Number: " + humanTask.getSystemAttributes().getTaskNumber());
out.println("<br>Task Id: " + humanTask.getSystemAttributes().getTaskId());
out.println("<br>Title: " + humanTask.getTitle());
out.println("<br>Priority: " + humanTask.getPriority());
out.println("<br>State: " + humanTask.getSystemAttributes().getState());
out.println("<br>Assignees: " + humanTask.getSystemAttributes().getAssignees());
out.println("<br>AcquiredBy: " + humanTask.getSystemAttributes().getAcquiredBy());
out.println("<br>Updated Date: " + humanTask.getSystemAttributes().getUpdatedDate());
out.println("<br>Assigned Date: " + humanTask.getSystemAttributes().getAssignedDate());
out.println("<br>Created Date: " + humanTask.getSystemAttributes().getCreatedDate());
out.println("<br>Updated By: " + humanTask.getSystemAttributes().getUpdatedBy());
out.println();
%>
</body>
</html>
Please Advise
Kind Regards,
-Bharathi

It's too late but if someone need the answer..
You can set if the outcome requires comments in General section of the Human Task.

How to trigger BPM Process from SRM Portal

Hello Experts,
I'am new to BPM and NWDS 7.3 but experienced with Abap and NWDS 7.0 Development...
Before posting, i have been through the forum and couldn't find exact answer to my case..
Basicly what i need to do is to trigger BPM Processes on the BPM Server from SRM Portal Server, I'm aware that i can communicate between these servers with WSDL basicly but how am i going to call the BPM Process' Web Service from Standart SRM Processes?
These processes will be standart ones mostly and also i am new to SRM.
Kindest Regards,

SAP SRM 7.0 user interface is developed in WebDynpro and runs on NetWeaver Portal (Portal was optional component in earlier versions of SRM but it is mandatory component now). So in order to call BPM Webservice (i.e., to trigger a BPM Process) from NetWeaver Portal / SRM 7.0 you can do the following
- Develop a custom application (using EJBs,etc) to call the BPM web service by creating a web service proxy client using NWDS and then deploying it on Portal Server.
- Directly create a model in WebDynpro project by using the WSDL of BPM trigger webservice (using NWDS). You can then call the model in WD User Interface, which in turn will invoke the BPM web service and start the process.
Hope this helps.

Any Possibilities to Customize Oracle 11g BPM Worklist

Hi all,
My Requirement is to Customize the Oracle 11g BPM WorkList App. I realise that Oracle no longer provide the code for the worklist app like in 10g and i don't want to write a custom worklist app.
If Possible what will be the procedure actually to follow, If anybody could help me to make it possible it would be a great help.
What we're trying to do is to see if we can block some options on the screens. So we do not need all of the enhanced functionality.
Renuka

Hi Ashif
1. The source code for SOA 11g is NOT available. You cannot customize any files and redploy directly. The main difference for 10g and 11g is, earlier SOA 10g is on Oracle App Server, so not sure how they deployed and how they exposed the source code in the Expanded folder structure for each WAR file like Workspace etc.
But for SOA 11g, it is on Weblogic App Server. All the SOA modules are deployed as EARs, WARs, JARs. So all the source .java files are compiled inside JARs and most of the jsps and serverlets are compiled as .class files inside WARs. Some people do go to soa domain/servers/soa_server/tmp folder and try to modify files there after they are deployed. This is totally not recommended and not supported also. When any soa module is deployed, it goes into dynamically generated weirdly named folder structure and puts all files there. Its not worth to modify there.
Also in SOA 10g, there was like a workspace.properties file directly accessible. But in SOA 11g, now this file is deep inside in one JAR/WAR file which is inside another EAR file. Now some people do extract this JAR from EAR. And from JAR, extract the .properties file. Update the file manually. Put modified file in JAR. Put this updated JAR in EAR. Redploy EAR. This is OK approach, but still not recommended. Because when you apply any patch or upgrade soa env, this EAR will be overwritten. So you had to redo all the steps again.
For Workspace/Worklist customizations, Oracle has some good features in SOA 11.5 + FP (Feature Packe). Only if you apply FP, you will get these features. Since it is very common usecase, for customizations, Oracle is working hard in new releases to give more flexibility.
Also, SOA 11g has very good APIs exposed and good number of call back handlers like ITaskValidationCallback etc etc. You can pretty much control most of the things when a Task is worked on like set/update Payload manually, control task assignment/validation etc using Java code etc. So you can use these approaches also to customize. Say if you want to narrow down list of users who can work on a Task, you can do this.
Also there is something called Flex Fields and Custom Views which come very handy to expose custom search results to different users/groups etc.
Since you are above to migrate to SOA 11.5, first apply Feature Pack (FP) to SOA 11.5 and then migrate your old app.
Thanks
Ravi Jegga

Exploded Directory path for BPM Worklist Applications

Hi All,
If anybody could tell me the location of Exploded Directory where all the existing worklist apps related jsfs are available it would be a great help for me to do some sort of Customization to the out of box Oracle 11g BPM worklist app.
Durga.

Hi Durga
1. Assuming you have a standard SOA/BPM Domain with one AdminServer and one SOA_SERVER1, here is the location where most of the modules are exploded and stored: /yourWeblogicSOAHome/user_projects/domains/yourSOABPMDomain1/servers/soa_server1/tmp. Under this tmp folder, you will see bunch of sub-folders and they have some more sub-folders. It is really tedious if you really want to cusotmize and modify files located at this location. I would strongly NOT recommend this. The files in tmp folders are not gauranteed. Afterall they are temporary file. And most of the times, when I restart my SOA SERVER, I always delete cache, tmp and logs folders. So you will loose all changes and you had to take back up of your changes and restore them.
2. If you really want customizations like increase timeout say for example, you should use weblogic console, deployments, that war/ear and modify and store the changes in custom plan.xml file.
3. If you really want to customize some jsff stuff, figure out which EAR/WAR is having that file. You can use general perception. Then directly go to the actual EAR and extract and get JAR/WAR. Then extract contenst of WAR and then modify jsff etc. Put jsff with same path back in war and put war back in EAR. Most of the soa modules are located at /yourWeblogicHome/Oracle_SOA1/soa/modules. The most important modules that has core files are like bpm-services which are at: /yourWeblogicHome/Oracle_SOA1/soa/modules/oracle.soa.workflow_11.1.1 and actual data controls/ui stuff in bpm-workflow-datacontrol.jar file in the same above module. ALWAYS take back up of original EAR/WAR/JAR before you extract and make changes.
4. Last option is you create your own Custom Worklist app which is not very simple (I would say), unless you want very basic minimum stuff.
Thanks
Ravi Jegga

Configure WebSphere Portal Server to use LDAP (Oracle Internet Directory)

I did configuration for WebSphere Portal to use security with LDAP Oracle Internet Directory (OID). The script for configuring works well (WPSConfig.bat action-secure-portal-ldap)
But when i start Portal Server it cannot start successfully. I did check in log file and found a error on SystemOut.log as attachment log below. I don't know what happen with WebSphere Portal Server.
If you guys know how to fix it please let me know or point me some documents to configure this again.
Thanks in advanced.
Servlet E com.ibm.wps.engine.Servlet init EJPFD0016E: Initialization of service failed.
com.ibm.wps.ac.DomainAdministratorNotFoundException: EJPSB0107E: Exception occurred while retrieving the identity of the domain adminuser/admingroup uid=wpsadmin,cn=Users,dc=localhost,dc=com.

There is no clear documentation available to enable custom security but IBM info center has decent documentation for LDAP based security. I would say follow the steps mentioned for IBM directory and then modify the necessary configuration parameters for OID. This should solve your issues. For better help open a PMR with IBM to get necessary quick help.

Missing Images and CSS when going to portal/server.pt can't login

Hi,
I installed WebCenterInteraction_10.3.0.0.0 on Windows and followed all the steps mentioned in the install doc. Deployed the portal.ear and here is what I see on the command line after deployment:
Task #1 (InitPortalObjects) END (OK)
Task #2 (CheckDevKit) END (OK)
Task #3 (InitializePaths) END (OK)
Task #4 (InitializeApplication) END (OK)
Task #5 (InitializeAppWarmUpHelper) END (OK)
Task #6 (InitializeImageServerHelper) END (OK)
Task #7 (InitializeConfigHelper) END (OK)
Task #8 (InitializeResourceManager) END (OK)
Task #9 (LoadVersionHelper) END (OK)
Task #10 (InitializeActivitySpaces) END (OK)
Task #11 (InitializeVarPacks) END (OK)
Task #12 (InitializeImageServerHelperPartII) END (OK)
Task #13 (InitializeObjects) END (OK)
Task #14 (LoadCustomLoads) END (OK)
Task #15 (CheckDBVersion) END (OK)
Aqualogic Interaction startup successful.
    ======= Diagnostic Run Complete =======
    Startup completion percentage: 100% (50 steps out of 50 complete)
    ===== Portal should now start successfully ===== But when I go to http://localhost:7001/portal/server.pt I don't see any images and the css is not applied so can't login. Any idea what might be wrong. Here is the Apache httpd.conf
Include "C:/bea/alui/plumtreeconf/"
# Based upon the NCSA server configuration files originally by Rob McCool.
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.0/> for detailed information about
# the directives.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a
#     whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server,
#     which responds to requests that aren't handled by a virtual host.
#     These directives also provide default values for the settings
#     of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
#     different IP addresses or hostnames and have them handled by the
#     same Apache server process.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "C:/Program Files/Apache Group/Apache2" will be interpreted by the
# server as "C:/Program Files/Apache Group/Apache2/logs/foo.log".
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which Apache.exe is located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths, however, to avoid
# confusion.
### Section 1: Global Environment
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation (available
# at <URL:http://httpd.apache.org/docs/2.0/mod/mpm_common.html#lockfile>);
# you will save yourself a lot of trouble.
# Do NOT add a slash at the end of the directory path.
ServerRoot "C:/Program Files/Apache Group/Apache2"
# ScoreBoardFile: File used to store internal server process information.
# If unspecified (the default), the scoreboard will be stored in an
# anonymous shared memory segment, and will be unavailable to third-party
# applications.
# If specified, ensure that no two invocations of Apache share the same
# scoreboard file. The scoreboard file MUST BE STORED ON A LOCAL DISK.
#ScoreBoardFile logs/apache_runtime_status
# PidFile: The file in which the server should record its process
# identification number when it starts.
PidFile logs/httpd.pid
# Timeout: The number of seconds before receives and sends time out.
Timeout 300
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
KeepAlive On
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
MaxKeepAliveRequests 100
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
KeepAliveTimeout 15
## Server-Pool Size Regulation (MPM specific)
# WinNT MPM
# ThreadsPerChild: constant number of worker threads in the server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_winnt.c>
ThreadsPerChild 250
MaxRequestsPerChild 0
</IfModule>
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
#Listen 12.34.56.78:80
# Listen 80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule access_module modules/mod_access.so
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_module modules/mod_auth.so
#LoadModule auth_anon_module modules/mod_auth_anon.so
#LoadModule auth_dbm_module modules/mod_auth_dbm.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule dir_module modules/mod_dir.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule headers_module modules/mod_headers.so
LoadModule imap_module modules/mod_imap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule status_module modules/mod_status.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
#LoadModule ssl_module modules/mod_ssl.so
LoadModule weblogic_module modules/mod_wl_20.so
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#ExtendedStatus On
### Section 2: 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If this is not set to valid DNS name for your host, server-generated
# redirections will not work. See also the UseCanonicalName directive.
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address anyway, and this will make
# redirections work in a sensible way.
ServerName localhost:80
# UseCanonicalName: Determines how Apache constructs self-referencing
# URLs and the SERVER_NAME and SERVER_PORT variables.
# When set "Off", Apache will use the Hostname and Port supplied
# by the client. When set "On", Apache will use the value of the
# ServerName directive.
UseCanonicalName Off
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "C:/Program Files/Apache Group/Apache2/htdocs"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
    Options FollowSymLinks
    AllowOverride None
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "C:/Program Files/Apache Group/Apache2/htdocs">
# Possible values for the Options directive are "None", "All",
# or any combination of:
#   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.0/mod/core.html#options
# for more information.
    Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
#   Options FileInfo AuthConfig Limit
    AllowOverride None
# Controls who can get stuff from this server.
    Order allow,deny
    Allow from all
</Directory>
# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received. Be especially careful to use
# proper, forward slashes here. On Windows NT, "Personal/My Website"
# is a more appropriate choice.
UserDir "My Documents/My Website"
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
# You must correct the path for the root to match your system's configured
# user directory location, e.g. "C:/WinNT/profiles/*/My Documents/My Website"
# or whichever, as appropriate.
#<Directory "C:/Documents and Settings/*/My Documents/My Website">
#    AllowOverride FileInfo AuthConfig Limit
#    Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
#    <Limit GET POST OPTIONS PROPFIND>
#        Order allow,deny
#        Allow from all
#    </Limit>
#    <LimitExcept GET POST OPTIONS PROPFIND>
#        Order deny,allow
#        Deny from all
#    </LimitExcept>
#</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
# The index.html.var file (a type-map) is used to deliver content-
# negotiated documents. The MultiViews Option can be used for the
# same purpose, but it is much slower.
DirectoryIndex index.html index.html.var
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives. See also the AllowOverride
# directive.
AccessFileName .htaccess
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
    Order allow,deny
    Deny from all
</FilesMatch>
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
TypesConfig conf/mime.types
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
<IfModule mod_mime_magic.c>
    MIMEMagicFile conf/magic
</IfModule>
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
HostnameLookups Off
# EnableMMAP: Control whether memory-mapping is used to deliver
# files (assuming that the underlying OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. On some systems, turning it off (regardless of
# filesystem) can improve performance; for details, please see
# http://httpd.apache.org/docs/2.0/mod/core.html#enablemmap
#EnableMMAP off
# EnableSendfile: Control whether the sendfile kernel support is
# used to deliver files (assuming that the OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. Please see
# http://httpd.apache.org/docs/2.0/mod/core.html#enablesendfile
#EnableSendfile off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog logs/error.log
# LogLevel: Control the number of messages logged to the error.log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# You need to enable mod_logio.c to use %I and %O
#LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog logs/access.log common
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#CustomLog logs/referer.log referer
#CustomLog logs/agent.log agent
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog logs/access.log combined
# ServerTokens
# This directive configures what you return as the Server HTTP response
# Header. The default is 'Full' which sends information about the OS-Type
# and compiled in modules.
# Set to one of: Full | OS | Minor | Minimal | Major | Prod
# where Full conveys the most information, and Prod the least.
ServerTokens Full
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (internal error documents, FTP directory
# listings, mod_status and mod_info output etc., but not CGI generated
# documents or custom error documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
ServerSignature On
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL. So "/icons" isn't aliased in this
# example, only "/icons/". If the fakename is slash-terminated, then the
# realname must also be slash terminated, and if the fakename omits the
# trailing slash, the realname must also omit it.
# We include the /icons/ alias for FancyIndexed directory listings. If you
# do not use FancyIndexing, you may comment this out.
Alias /icons/ "C:/Program Files/Apache Group/Apache2/icons/"
<Directory "C:/Program Files/Apache Group/Apache2/icons">
    Options Indexes MultiViews
    AllowOverride None
    Order allow,deny
    Allow from all
</Directory>
# This should be changed to the ServerRoot/manual/. The alias provides
# the manual, even if you choose to move your DocumentRoot. You may comment
# this out if you do not care for the documentation.
AliasMatch ^/manual(?:/(?:de|en|es|fr|ja|ko|ru))?(/.*)?$ "C:/Program Files/Apache Group/Apache2/manual$1"
<Directory "C:/Program Files/Apache Group/Apache2/manual">
    Options Indexes
    AllowOverride None
    Order allow,deny
    Allow from all
    <Files *.html>
        SetHandler type-map
    </Files>
    SetEnvIf Request_URI ^/manual/(de|en|es|fr|ja|ko|ru)/ prefer-language=$1
    RedirectMatch 301 ^/manual(?:/(de|en|es|fr|ja|ko|ru)){2,}(/.*)?$ /manual/$1$2
</Directory>
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
ScriptAlias /cgi-bin/ "C:/Program Files/Apache Group/Apache2/cgi-bin/"
# "C:/Program Files/Apache Group/Apache2/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "C:/Program Files/Apache Group/Apache2/cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
</Directory>
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Directives controlling the display of server-generated directory listings.
# IndexOptions: Controls the appearance of server-generated directory
# listings.
IndexOptions FancyIndexing VersionSort
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
DefaultIcon /icons/unknown.gif
# AddDescription allows you to place a short description after a file in
# server-generated indexes. These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
# HeaderName is the name of a file which should be prepended to
# directory indexes.
ReadmeName README.html
HeaderName HEADER.html
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing. Shell-style wildcarding is permitted.
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
# DefaultLanguage and AddLanguage allows you to specify the language of
# a document. You can then use content negotiation to give a browser a
# file in a language the user can understand.
# Specify a default language. This means that all data
# going out without a specific language tag (see below) will
# be marked with this one. You probably do NOT want to set
# this unless you are sure it is correct for all cases.
# * It is generally better to not mark a page as
# * being a certain language than marking it with the wrong
# * language!
# DefaultLanguage nl
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
# Note 2: The example entries below illustrate that in some cases
# the two character 'Language' abbreviation is not identical to
# the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
# Note 3: In the case of 'ltz' we violate the RFC by using a three char
# specifier. There is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
# Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da) - Dutch (nl)
# English (en) - Esperanto (eo) - Estonian (et) - French (fr) - German (de)
# Greek-Modern (el) - Hebrew (he) - Italian (it) - Japanese (ja)
# Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk (nn)
# Norwegian (no) - Polish (pl) - Portugese (pt)
# Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (sv)
# Simplified Chinese (zh-CN) - Spanish (es) - Traditional Chinese (zh-TW)
AddLanguage ca .ca
AddLanguage cs .cz .cs
AddLanguage da .dk
AddLanguage de .de
AddLanguage el .el
AddLanguage en .en
AddLanguage eo .eo
AddLanguage es .es
AddLanguage et .et
AddLanguage fr .fr
AddLanguage he .he
AddLanguage hr .hr
AddLanguage it .it
AddLanguage ja .ja
AddLanguage ko .ko
AddLanguage ltz .ltz
AddLanguage nl .nl
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pl .po
AddLanguage pt .pt
AddLanguage pt-BR .pt-br
AddLanguage ru .ru
AddLanguage sv .sv
AddLanguage zh-CN .zh-cn
AddLanguage zh-TW .zh-tw
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
# Just list the languages in decreasing order of preference. We have
# more or less alphabetized them here. You probably want to change this.
LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW
# ForceLanguagePriority allows you to serve a result page rather than
# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
# [in case no accepted languages matched the available variants]
ForceLanguagePriority Prefer Fallback
# Commonly used filename extensions to character sets. You probably
# want to avoid clashes with the language extensions, unless you
# are good at carefully testing your setup after each change.
# See http://www.iana.org/assignments/character-sets for the
# official list of        .utf7
AddCharset utf-8       .utf8
AddCharset big5        .big5 .b5
AddCharset EUC-TW      .euc-tw
AddCharset EUC-JP      .euc-jp
AddCharset EUC-KR      .euc-kr
AddCharset shift_jis   .sjis
# AddType allows you to add to or override the MIME configuration
# file mime.types for specific file types.
#AddType application/x-tar .tgz
# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For files that include their own HTTP headers:
#AddHandler send-as-is asis
# For server-parsed imagemap files:
#AddHandler imap-file map
# For type maps (negotiated resources):
# (This is enabled by default to allow the Apache "It Worked" page
# to be distributed in multiple languages.)
AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external

I am not expert in these, but please check out the following things and see whether it would solve your issue. (All these changes can be easily rolled back in case I'm wrong :). So make note of what you do)
As per your httpd.conf, you have chosen an automatic configuration of Apache by OWCI installer itself. What it does is create an imageserver.conf file in a separate directory and these settings will be included in your httpd.conf as you can see in the first line: Include "C:/bea/alui/plumtreeconf/".
If you check the imageserver.conf in that location, you would find a line like: Alias /imageserver/ "C:/bea/alui/ptimages/imageserver/". This aliases the original path "C:/bea/alui/ptimages/imageserver/" to /imageserver"
To confirm whether this is done right, check the following:
1. Acces 'http://<server ip / server name / localhost >/' from your browser
This should display the Apache home page (as per your httpd.conf, it uses the default port 80; so no port number required)
2. Access 'http://<server ip>/imageserver/' from your browser
This should display the directory structure (if its not disabled) inside your 'C:/bea/alui/ptimages/imageserver/' folder. Also confirm that all the subfolders are accessible.
3. If all the above is right, it means that your imageserver settings are right. Please check your portalconfig.xml for the correct settings: For example, <setting name="HTTPPort"> should be 7001 in your case. If its something else, change it and restart Weblogic for the settings to take effect.
Hope this helps.

To Complete the task without taking complete action in BPM worklist.

In my project ,there is one requirement that to complete the task without taking complete action in BPM worklist.
So I am trying to acheive this using JAva API of BPM worklist.
For that I have followed the approach given in below link
http://technology.amis.nl/2007/02/invoking-bpel-worklist-api-from-remote-server-with-java/
Created java application and imported all the required libraries and jars.
while running this application it is giving following error
NoClassDefFoundError: oracle/j2ee/ws/common/jaxws/ServiceDelegateImpl
This is due to absence of 'ServiceDelegateImpl.class' which should be present in webclient.jar ,
I have also added the same jar from jdeveloper\webservices\lib folder.
but the thing is ServiceDelegateImpl class is missing in webclient.jar.
I have downloaded the same jar from internet and tried various versions also.
still the problem persists.
Which jar should I add ? or any other configutation is required ?
Am I following correct approach?
Any suggestions on other approach would be appreciated.
Thanks in advance.

Hi Marc,
You can set the task Process Owner (i.e. TaskProcessOwner) to the group which Bowman and
Laura belong to from SharePoint Designer, then they should be able to complete the re-assigned task.
http://www.fourbuckeyes.com/2013/06/07/task-delegation-in-sharepoint-2010-approval-workflows/
http://community.rightpoint.com/blogs/viewpoint/archive/2012/04/17/sharepoint-designer-2010-workflow-advanced-properties.aspx
Thanks
Daniel Yang
TechNet Community Support

How to use the CMS functionality in Sun Portal Server 7.2

Hi All,
How to use the CMS functionality using the ccd.war(Portlet) which is available in the library as i could add it to my channel but not able to show the functionality as it is showing the error msg "You are currently not logged in. Please login." should I create userid and there respective roles inorder to use the CMS functionality.
Has any one used this as I could this in glass fish server.
Any Input is appreciated.
Thanks & regards
Srikanth

Have a look at the "*Roles*" section of the portal server 7.2 content management system guide
http://docs.sun.com/source/820-4275/index.html . You can also look at [project mirage|https://mirage.dev.java.net] for some screencasts
Alternatively,
1. ccd.war has 3 portlets in it:
(a) custom content definition portlet
(b) custom content portlet
(c) workflow portlet
2. Inorder to work with these portlets, user needs to be in anyone of the below roles:
(a)Consumer (b) Editor (c) Approver (d) Administrator (e) Submitter (f) Contributor (g) Publisher
3. By default ccd.war gets deployed using a default roles file (/var/opt/SUNWportal/tmp/ccd.roles.properties)
Note: In windows, you may not find this file
4. Access the portlets as a user in any of the role mentioned in the ccd.roles.properties
(OR)
you can use a new roles file which has mapping to your custom roles. For this , undeploy existing ccd.war and deploy again with a new roles.properties file
Hope this helps!

BPM worklist in custom portal server

Similar Messages

Maybe you are looking for