[BPMON] - IDOCs fields monitoring - works incorrectly?

Hi,
Following the documentation I have set up a monitor that should monitor IDOCs in errors and that works correctly.
However there came a new requirement from the project about excluding from monitoring IDOCs that have a value 0 of one particular field. Therefore I set up a monitor that selects inbound IDOCs of a Message type let's say called MESSAGE, max IDOC age - 24, Field Name - SegmentName-FieldName, Field Value - I tested with >0 and with not equal to 0.
However with this setup IDOCs with SegmentName-FieldName = 0 are still monitored and they generate errors in BPMon.
Any suggestions what I might be possibly doing wrong?
Edited by: Gniadek Jolanta on Jun 21, 2011 12:58 PM
Actually I believe I found an answer, I believe that the problem lies in the logic, so BPMon maybe excludes IDOC that has a value 0 but later for other segments that have higher value it'll include it again. I guess this option would work only for fields with specific values that need to be included not excluded

Actually I believe I found an answer, I believe that the problem lies in the logic, so BPMon maybe excludes IDOC that has a value 0 but later for other segments that have higher value it'll include it again. I guess this option would work only for fields with specific values that need to be included not excluded

Similar Messages

  • Are idoc fields case sensitive?

    Hello, there has been an error during idoc processing. The trading partner field was filled in lowercase and this is bringing me error      Message no. FB279  ' Company dp0017 is not defined'. The other idocs had DP0017 filled in and were processed fine.
    Any input on this? thx.
    Edited by: Antish  Awootar on Jun 7, 2011 8:02 AM

    Hi Antish,
    It actually depends on the value that is stored in the IDOC, if the IDOC has company code in lower case then that is exactly how it will be used in the program for all purpose and no automatic conversion is applied. The below message is thrown in the FM - FI_COMPANY_CHECK This FM will look up the table T880 - If you check the entry in this table will be DP0017 and not dp0017. Hence it is throwing the error message.
    If your question is it works fine when i try in SE37 with the FM "FI_COMPANY_CHECK" or if i input "dp0017" in  WE19 or in SE11 against T880, then the reason for that is a conversion is applied automatically and it is changed to DP0017.
    To answer your question "Are idoc fields case sensitive?", it depends on the context, does it retain the case when it is filled in, yes it does.
    Regards,
    Chen
    Edited by: Chen K V on Jun 7, 2011 4:10 PM

  • Photoshop interpreting monitor colors incorrectly

    My issue is with my second monitor and the colors of  Photoshop files.  I am using a two monitor setup with my macbook laptop.
    I process a Raw file using Lightroom 2.  I export a Jpeg and it  looks perfect when I open it in Preview, matching the Lightroom, when viewed on the second monitor screen.  But, when I open that file in Photoshop it looks about 15% desaturated, when viewed on the same 2nd monitor.
    The really wierd kicker is that as I drag the photo from the Macbook screen to the second monitor screen, while in photoshop, it looks fine.  It only desaturates as I ungrab it (or unclick it if you prefer).  I am speculating that photoshop is interpreting the monitor profile incorrectly or something.....  any help out there?

    So, I figured out a work around with the help of my friend.  He stated that Photoshop can only work with one monitor profile.  So I moved the arrangement of my displays so that the external display is the main one.  Now PHotoshop looks just like Lightroom.
    My new question is... Is there a way to have photoshop read my external display without having it be the main display in the systems preferences?
    Thanks

  • NO COLOR in Field Monitor of Adobe OnLocation

    CONFIGURATION:
    OnLocation CS3 (Trial), with XP Home SP2, Dell Dimention 4400, and NVidia AGP GeForce 5200 128MB video card, and 21" Optiquest Q110 monitor.
    Video card supports 2 monitors analog (DB15) and DVI. In my configuration only analog output and single monitor is connected. There is also standard FireWire 1394 port where camera is connected. All works fine...
    THE PROBLEM:
    ... except BARS and live feed image from camera, are always displayed in BLACK and WHITE (no color) but BLUE BARD are displayed in BLUE shades cirrectly. Monitor was callibrated and adjusted properly with NVidia settings (contrast, brightness, gamma, etc.) and all other applications are displayed in COLOR properly.
    NOTES:
    I understand that Field Monitor use overlay to display images, it should work OK as other video applications using overlay display work properly (e.g. Windows Media Player).
    QUESTION:
    What are technical reguirements for video (cards/monitors) to work properly with OnLocation as I couldn't find ANY information on Adobe website or anywhere else. Or, if anybody had similar problem and would like to share solution I would appreciate.

    All turned out OK. It was just wrong setting for Field Monitor.
    Everything works properly and live feed is now in full COLOR.

  • Mapping the IDOC fields for Inbound PO

    Hi,
    I am trying to map the fields for PO for IDOC type ORDER05, but unable to do so for the following IDOC fields in segments.
    Document Date
    Vendor
    Account Assignment Category
    Delivery Date
    Requirement No.
    Requisitioner
    Purchase Requisition
    Preq Item No.
    Outline Agreement
    Outline Agreement No.
    What fields in the IDOC match these in SAP R/3.
    Thanks,
    Randy.

    Hi Did you manage to get this IDoc working? I'm having the same problem with the mapping and the documentation is really bad.
    Thanks.

  • Missing IDOC field in XML after IDOC reimported in ESR

    Hi Guys,
    I have just reimported my IDOC in ESR wherein an additional field is added.
    However, when I test a message, the IDOC field is missing in the XML payload upon entering PI even though I have entered a value in the IDOC.
    Flow:
    SAP ECC > PI
    I have also already updated my message mapping. I'm not sure if I have missed any steps after importing the IDOC in ESR.
    Could you please help me on this issue?
    I'm using ICO by the way.
    Thanks and Regards,
    Neil

    Hi Neil,
    As Shanthi said you need to update metadata but since you are using ICO you need to do it in NWA.
    NWA->SOA->Monitoring->IDOC Adapter Monitoring
    Regards,
    Praveen.

  • Removing unused IDOC fields

    Hi All ,
    Removing unused IDOC fields using an XSLT editor is possible? If so, we can import them the IDOC as XSD correct? What will be the immediate benefit of such a tweak?
    Thanks
    XA

    Hi,
    When the Idoc definition itself is huge enough to cause the XI message mapping
    editor to consume a lot of memory and at times even end up giving an Out of Memory error, only while displaying
    the mapping. SAP recommends that a Reduced XSD feature provided by the Integration repository should be
    used in place of actual Idoc structure to avoid memory issues.
    If it is imported as an IDoc and used thereafter directly in mapping still results into an XSD of
    around more than 3 MB and causes trouble during opening of the mapping and also gives errors during mapping
    edit leaving the work in a vulnerable state.
    To overcome issues in the design editor to a considerable extent by using Reduced XSDs.
    you can find more details in Note # 709400.
    Regards,
    Harish

  • SX50 HS with Field Monitor

    Hi,
    Is it possible to connect the SX50 HS during shooting to an external Monitor via the HDMI output and do the composing / focusing on the much bigger screen?
    Unfortunately I have no Mini-HDMI cable to test, so before I invest in cable and monitor I prefer to ask.
    Thanks
    Robert

    CHDK does have Remote options for using several controls, but none for viewing live streams which I'm assuming what is meant by the OP - yes? I've been all over the CHDK PDF and there isn't a mention of streaming being made available to see better the Focussing and so on. Is there a loupe "shroud" that one of the Hoodman options:
    http://www.hoodmanusa.com/prodinfo.asp?number=h-lpp3
    http://www.hoodmanusa.com/cvp.asp
    OK, I just tried with a mini to standard HDMI to my pro field monitor, which I do use with my Canon XF300, but to test I lashed it up to my SX50  - and no. I can't get a live stream from the SX50 output to see, only on Viewing previously captured work through Review. Nothing live.
    Grazie

  • Mini DVI to DVI monitor working

    I have a Black MacBook running 10.7.3. I have ta Bookendz and a mini DVI to DVI aadpater and two differnet DVI cables. I have tried all combinations and can not get my LG monitor to display anything, it just goes into power saving mode. My MacBook sees the external monitor in the display prefernces, and even has the right resolution set. When I first had the monitor it wouldn't work through and I was going to send it back, but it just started working.
    The monitor works fine when plugged into a Mac Mini, or through the HDMI and VGA ports when plugged into my MacBook. Any help greatly appreciated.

    The mini-DVD to DVI adapter doesn't pass through the analog video signals needed for VGA, so won't work with a DVI to VGA adapter. All the control signals are there, so the display is recognized, but there will be no picture.
    They could have used a DVI-D connector on the adapter, instead of DVD-I, so the DVI to VGA adapter wouldn't even plug in, but then it couldn't be used with some non-Apple LCDs, that use DVD-I connecters.

  • My external monitor worked with my MacBook Pro before I took it on a little trip, now it won't work.  Any suggestions?

    My external monitor worked with my MacBook Pro before I took it on a little trip, now it won't work.  Any suggestions?

    Never mind.  Sorry.  It fixed itself.

  • HOW to temporarily use Broadcast monitoring work on snow leopard OS X v10.6.8  for  FINAL CUT PRO X

    thx,macmacmac give me prompt.He had an interesting trick for getting the OS X Lion 'only' plugin to work on Snow Leopard
    To install the plugin on Snow Leopard OS X 10.6.8 you have to temporarily change your system version number to Lion 10.7.2!
    1. Go to HD:/System/Library/CoreServices/SystemVersion.plist
    2. Copy the file to the Desktop
    3. Open the original with a text editor and change the string value of 'ProductVersion' and 'ProductUserVisibleVersion' to '10.7.2'.
    4. Save & Overwrite.
    I suddenly thought  Apple said that Broadcast monitoring work on Lion OS X v10.7.3.I change system version number at once! Changing 10.6.8 snow leopard system version number to Lion 10.7.2!
    ok,no problem. Restart final cut pro x,A/V output has appeared in FINAL CUT PRO X preferences and Window Menu
    Enjoy it.HAHA!:cheer:

    thanks for the tip fan!

  • Twist: Can't make two external monitors work

    I'm trying to get two external monitors to work with my twist. One is connected via mini-HDMI, the other using a Thunderbolt adapter (I've tried adapters for VGA, DVI and HDMI - same result). Only one external monitor (mini HMDI) works, although Win8 detects both (lists the grayed-out monitor make/model correctly). If I unplug either monitor, the other works fine.
    Note that I am using an Apple Thunderbolt adapter, not the Lenovo Mini DisplayPort adapter. I use the Thunderbolt adapter with one monitor all the time.
    I have two monitors working at another location; Mini DisplayPort -> VGA and USB -> SVGA.
    Is the problem that I'm not using the Lenovo adapter, or is this never going to work? Thanks.

    The Twist should support internal LCD + one external LCD (or 2 external LCD with displayport splitter) on at the same time.
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Monitor works for one second, then blank

    I have been reading many of the post people have put down about monitors and mac mini's, however can't find anyone with my problem.
    I bought a mac mini and a cheap monitor from PC world, a Xerox 17" TFT, thinking that it would work fine. However when I connected them up using the DVI cable, at start up the monitor works for a second then blank. Turning it off and back on again brings the image back but again for just a second. This is annoying in that the mac mini is still in its welcome first run making it difficult to get beyond it to mess around with the monitor settings given a window of a second each time.
    There was an adaptor that came with the monitor, but to use that I would have to plug that adaptor into the macs DVI adaptor as well, something I tryed but no luck, in fact no image at all.
    Has anyone else had this problem?

    I've had this problem too, resetting the PMU and PRAM usually helps:
    http://docs.info.apple.com/article.html?artnum=300574
    http://docs.info.apple.com/article.html?artnum=2238
    Mario
    Mac Mini   Mac OS X (10.4.6)   Core Duo / 2GB

  • Would connecting the HDMI port of my 15 Macbook Pro Retina to the DVI input port on my Dell UltraSharp 2434 LED HD Monitor work?

    Would connecting the HDMI port of my 15 Macbook Pro Retina to the DVI input port on my Dell UltraSharp 2434 LED HD Monitor work?

    Hi Wizard0705,
    If you have questions about connecting an external display to your MacBook Pro, you may find the following article helpful:
    Apple Support: How to use multiple displays with your Mac
    http://support.apple.com/kb/HT5019
    Regards,
    - Brenden

  • My external monitor works but I can't get my screen to work on my power book anymore

    Can not get my screen on power book G4 to work but my external monitor works fine. Did I press something and turn it off?

    rm44 wrote:
    The both screens always worked fine but now the power book doesn't show anything on the screen.  I didn't drop it or even move it.  Where is the brightness button?  Could I have hit it by mistake?
    Thanks so much for your help.
    F2 is the up-brightness button, F1 is the down-brightness button, usually, on PowerBooks.  If for some reason the F1 button got held down for a couple of seconds, the display would go completely dark.
    That being said, if the backlight does not come up (easily determined by seeing if the Apple outline on the cover is lit up) then the most likely suspect would be the inverter board, or the connection to the inverter board.  If this is a Titanium PG G4, the inverter board is easy and relatively inexpensive to replace.  For the Aluminum models, I don't know if that is quite so true.

Maybe you are looking for

  • WARNING: DO NOT USE nail polish remover--Even Non-Acetone! (on macbook).

    Here's my experience with my pathetically stained MacBook after 4 weeks. The discoloration arrived, seemingly all at once, after 2.5 weeks. I tried my usual, a gentle part-alcohol Staples Screen Cleaning Fluid (coincidentally, I asked them at my loca

  • Interface scenario: idocs from r/3 to XI

    Business Scenario is as follows: 1. We,the client, is R/3 and would post IDOCS forward. 2. These would go to XI/PI platform, which would send it forward as idoc xml or idoc it thru to XGS (EDI handling system,optional i.e. only in certain cases) towa

  • Add 1 field to metadata

    Hello. I expose my problem: I hace 1 XLS file with 40 columns. I have extracted 13 of them and I pivoted (from columns to rows). Now I need to add 1 field to the resulting metadata to identify records, is it posible? Once you add this field, could jo

  • Flash player won't play videos in safari after I've installed Lion does anyone have a solution?

    Hi, I've installed Lion after which Flash Player won't play videos with Safari. I keep being prompted to download and install the latest version of Flash Player whcih I've done several times. Can someone please help me fix this. I find Adobe's announ

  • Is SETI software okay to use on my iMac?

    I used to run BOINC software for SETI on my old PCs (may they rest in peace), but now I'd like to help with the SETI search using my new iMac.  Anyone see any problems with running the BOINC software?