BPMon: Send BPMon alerts to third party tool through SNMP traps
Hi All,
In our environment the preferred ticketing tool for raising tickets is a CA tool. I have managed to integrate system monitoring on Solution Manager with this third party tool using SNMP traps. Essentially when a system monitoring alert is raised in the alert inbox of solution manager, ticket gets raised in the CA tool.
I want the same integration with BPMon alerts. Whenever a BPMon alert is raised, I want to send an SNMP trap to the CA ticketing tool.
Can someone please guide me to the correct configuration guide or how its done.
Regards,
Ash
Hi Ash
Pleasee see the help guides on raise auto alerts based on CCMS and MTE
http://help.sap.com/saphelp_nw04s/helpdata/en/a9/ef1e109d1af946ae5ab624f972c6fa/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/43/ee6df92cf4eb41b11d15cc8e3a368a/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/66/f9a9b903a611d3b44f006094b910d9/content.htm
As Keiji has said, the functionality that you are looking for is part of teh MAI infrastructure that is available is SP12
Best Regards
Mark
Similar Messages
-
I already uploaded the third party device's MIB to PI2.0, but could not recive the third party device's SNMP TRAP properly .
what do I need check for the PI ? or what do I need to setup for the PI?
ThanksDuplicate post of :
https://supportforums.cisco.com/discussion/12148626/how-enable-snmp-trap-funcation-prime-infrasructure-20-receiveing-third-party
-Thanks
Vinod -
Sending data directly from BW To Oracle DW via Open hub Third party tools
HI All
We need to send data from SAP BW 7.0 to Oracle 11g DW. The requirement is to pass data through open hubs. So we wanted to explore the option of directly passing the data from BW to Oracle using third party tools. So i tried to gather information on the third party tools and came across list of APIs and some pointers on creating a RFC through SM59. But dont know how to do it or what parameters to pass. Could you please point me in the direction or list me step by step detailed instructions as to how I can achieve this?Hi Amit..
I can see the following will make things work for you.
1) BODS.
2) PI ( XI).
3) BI7.0 to FTP and from FTP you to push these tp your oracle system..
Regards,
rajesh -
Third-party tools for solution manager
Hi all,
Im new for solution manager a i just want to know whats SM tools and whats the third-party tools integrate and interface with SAP Solution Manager and if will be more third party tools?? ( Whats the add on tools SM have??)
regards
TimHi Murali Narayanan
If you wan to achieve monitoring from technical perspective, the way that was introduced by shivjansi might be the option.
If you want to check the entry of specific table in stand alone MSSQL to ensure the business process that use MSSQL
stand alone DB, you can use BPMon remote DB monitoring that enables monitoring of non ABAP/ non SAP that supported
by netweaver like MSSQL, Oracle, DB2.
By using this function, you can monitor the entry of your stand alone SQL server.
For example, stand alone SQL Server has some table that contains some error,
or there is application table and in one row that it indicates error or completeness.
Now if you want to check these error document or incomplete document in the DB,
you can use BPMon remote DB monitor.
By monitoring this, you can ensure whether there is issue in your business or not.
You can find out how to setup from following link.
http://service.sap.com/bpm
->technical detail ->Setup Guide for non-ABAP/non-SAP
P14 (The monitoring object u201CGeneric Table Entry Counter for remote DBu201D (NATABCNX) )
is related description.
(In the document, it also introduce some other way using web service).
Also in same link, you can find out other document like how to setup BPMon.
Also there is some blog about table entry counter. it is for SAP ABAP system.
But the function is more or less same for remote DB.
So you can also check following blog to have more understandable image.
/people/volker.vongloeden/blog/2010/07/16/create-your-own-customer-specific-key-figure-for-business-process-monitoring-within-5-minutes
Best Regards
Keiji -
Open hub Destinations - Third-Party Tools As Destinations
Dear all, below is the SAP Help process flow steps. I am quiet clear of all the steps except the APIs. Where do we define these APIs? When it says "You use API RSB_API_OHS_DEST_SETPARAMS to define the parameters for the third-party tool that are required for the extraction" where do I use it? Is it in the 3rd party tool? or is it in SAP BI.
If it is in 3rd party tool, where in 3rd party tool. Do I need to write as code ? or would I have an option in the 3rd party tool?
If someone can help me with Microsoft connector using Microsoft SQL Server 2008 Integration Services packages to SAP BI that would be helpful.
Where in Microsoft SQL Server 2008 Integration Services packages can I use/put this APIs? Any help Plzz
If it is in SAP BI where in SAP BI do I have to use these APIs? Any help is highly appreciated
Regards,
KK
Process Flow:
Extraction to the third-party tool can be executed as follows:
1. You define an open hub destination with Third-Party Tool as the destination type.
2. You create an RFC destination for your third-party tool and enter it in the definition of the open hub destination.
3. You use API RSB_API_OHS_DEST_SETPARAMS to define the parameters for the third-party tool that are required for the extraction.
4. You either start extraction immediately or include it in a process chain. You can also start this process chain from the third-party tool using process chain API RSPC_API_CHAIN_START. The extraction process then writes the data to a database table in the BI system.
5. When the extraction process is finished, the system sends a notification to the third-party tool using API RSB_API_OHS_3RDPARTY_NOTIFY.
6. The extracted data is read by API RSB_API_OHS_DEST_READ_DATA.
7. The status of the extraction is transferred to the monitor by API RSB_API_OHS_REQUEST_SETSTATUS.It's been a along time since i worked with open hub, but here goes:
The Third Party tool needs parameters or switches to work correctly. Think of the old DOS commanda the "/a" "/b" suffix.
The APIs are simply a way to pass these parameters from the BW source to the Third Party target.
If your tool does not need them, don't worry about them.
John Hawk -
Is a third-party tool required for data extraction to non-SAP system?
Hi,
I want to extract data to non-SAP systems with the open hub service.
If I choose Database tables as open hub destinations, I would like to know if a third-party tool is mandatory and if it's possible to send data directly from database tables in BW to non-SAP systems.
Many thanks
Ellayou can choose a flat file on the application server and then transffer the file from the application server to other server where you want to use.
in case you want to use the table in the open hub service. any other software that can connect to oracle db / the databasee you have and can access the data from the table.
Regards,
Bwer
Assign points if helpful. -
Open Hub Destination-Third Party Tool
dear all,
can any one guide me as to how data(master data in particular) from bw can be transferred to oracle data base using open hub destiantion.is rfc connection between bw and third part tool enough,do we have to maintain the same structure in third party tool before executing DTP and how can this be done??
i am now able to transfer data from bw into a flat file and also to data base (bw) and not aware of the this functionality-third party tool .any light thrown on this area is welcome and points will be awarded ,
thanks ,
sasidhar gunturuSome light at the end of tunnel for sure...
Extraction to the third-party tool can be executed as follows:
1. You define an open hub destination with Third-Party Tool as the destination type.
2. You create an RFC destination for your third-party tool and enter it in the definition of the open hub destination.
3. You use API RSB_API_OHS_DEST_SETPARAMS to define the parameters for the third-party tool that are required for the extraction.
4. You either start extraction immediately or include it in a process chain. You can also start this process chain from the third-party tool using process chain API RSPC_API_CHAIN_START. The extraction process then writes the data to a database table in the BI system.
5. When the extraction process is finished, the system sends a notification to the third-party tool via API RSB_API_OHS_3RDPARTY_NOTIFY.
6. The extracted data is read by API RSB_API_OHS_DEST_READ_DATA.
7. The status of the extraction is transferred to the monitor by API RSB_API_OHS_REQUEST_SETSTATUS.
For more details click below -
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/7a69d9f3897103e10000000a1553f7/content.htm
Hope it Helps
Chetan
@CP.. -
What are the stpes to configure third party tools in BW
Hi all,
can you please send me any documents on "what are the stpes to configure third party tools in BW"Hi,
1> Define the RFC connection ;ex:-Define the IP address using SM59
2> Define the third pary sourcesystem
3>Assign it to infosources
4>Map and define transformation rules
5> Create Infopackage and load the data.
I hope it would help you.
Regard's
Prasad -
Third Party Tool-Open Hub Destination
dear all,
can any one guide me as to how data(master data in particular) from bw can be transferred to oracle data base using open hub destiantion.is rfc connection between bw and third part tool enough,do we have to maintain the same structure in third party tool before executing DTP and how can this be done??
i am now able to transfer data from bw into a flat file and also to data base (bw) and not aware of the this functionality-third party tool .any light thrown on this area is welcome and points will be awarded ,
thanks ,
sasidhar gunturuSome light at the end of tunnel for sure...
Extraction to the third-party tool can be executed as follows:
1. You define an open hub destination with Third-Party Tool as the destination type.
2. You create an RFC destination for your third-party tool and enter it in the definition of the open hub destination.
3. You use API RSB_API_OHS_DEST_SETPARAMS to define the parameters for the third-party tool that are required for the extraction.
4. You either start extraction immediately or include it in a process chain. You can also start this process chain from the third-party tool using process chain API RSPC_API_CHAIN_START. The extraction process then writes the data to a database table in the BI system.
5. When the extraction process is finished, the system sends a notification to the third-party tool via API RSB_API_OHS_3RDPARTY_NOTIFY.
6. The extracted data is read by API RSB_API_OHS_DEST_READ_DATA.
7. The status of the extraction is transferred to the monitor by API RSB_API_OHS_REQUEST_SETSTATUS.
For more details click below -
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/7a69d9f3897103e10000000a1553f7/content.htm
Hope it Helps
Chetan
@CP.. -
Third party tool interface integration with SAP
Hi guys - here's an interesting one:
I want to integrate a third party tool with SAP. The interfaces would be required to communicate both ways - sending data out and receiving data and populating relevant tables / transactions. I, so far see a number of methods available to me that would be suitable and feasible:
<b> - File based exchange of data
- iDocs (custom or standard)
- BAPIs (custom or standard)</b>
- XI (but this method would not be feasible and would thus not consider it)
In all the cases above (apart from XI), I guess I would require a program that would call the BAPIs or distribute iDoc data or extract and populate file based data. I have so far compiled a list of various advantages and disadvantages and just wanted to probe your expert minds.
<b>Please list the advantages and disadvantages of each method, providing a reasonable discussion as to why you think this is the case. If you think any other method would be suitable, please list this too.</b>
The person with the most accurate and detailed answer will receive all the points.
Thanks
MantasHi Mantas,
The Pros and Cons in this case depends on the third party tool which you want to intergrate with SAP.
File Based Exchange of data: How conveniently can you push the data from the third party tool into a file.
IDocs: The third party tool should understand the syntax and symantics of the IDoc.
BAPIs: How do you plan to call the BAPI from the third party tool.
From just the SAP point of view.
Here are the advantages and disadvantages:
1. File Based Exchange of data:This method is good if you can easily pass a file which can be uploaded into sap and the data can be stored in the sap tables.
2.IDocs:
Advantages:
If you have an existing IDoc that can do the data transfer then this would be the simplest method as only the settings are needed.No program is required to call this IDoc the settings automatically take care of this.
Disadvantages:
If a custom IDoc needs to be developed then creation of a BAPI would be a better option.
3.BAPIs:
Advantages:
It is simpler to develop a BAPI than a custom IDoc which involves creation of segments, function modules etc.
Disadvantages:
There should be an active online connection.
Some programming will be needed to call the BAPI. -
SSL: Portal and Third-Party-Tool
Hello everybody,
I need an advice how to solve the following problem: We integrated a Third-Party-WebTool with the Application Integrator. If we lauch the portal and the special iView with HTTP everything works fine but with HTTPS we get an error message: "Session Management will not work! Please check DSM log files for details. You can turn off this alert inside 'Support Desk' -> 'SAP Application'"
Do I need those logs? Because if I understood the message correctly this deals only with SAP Applications. What about Third-Party-Tools with own SSL certificates? How solve the problem described above? Do I need to import the certificate of my Third-Party-Tool into my portal keystorage? Do I need to configure anything else?
Thanks in advance...
Regards
SteffenI would be very appreciated if anybody could give me an advice...
Steffen -
Concur (Third Party Tool to enter expenses) integration with Oracle Payables
Hi Gurus,
My client is replacing Oracle iExpenses with Concur (Third Party Tool to enter expenses). I need to work on the inbound and outbound interfaces from Concur to Oracle Payables and vice versa. Here my concern is: how to deal with the Credit card transactions?
If you have any idea on this, please give me some suggestions.
Thank you.
Thanks
BMKHi,
1. How we need to interface the credit card transactions to Payables?
2. Will Concur send credit card details to Payables?
Can you please provide me the process (how you people are integrating concur with payables)?
Thank you very much.
Thanks
BMK -
I need help with some technical YouTube Settings, third party tools page
How can I add ios mobile Safari, back to my google + third-party tools page? I updated my ipad 2 to ios7 and could no longer upload videos to youtube for my blog. YouTube had been saying unrecognized file type because it's not longer compatible with ios mobile photos app.
I went into settings via the google/youtube help files and removed some old stuff from the third party apps, like blogger-an inactive blog and obviously deleted the ios moblie too that was right underneath blogger. tried jumping through their hoops, add a phone number, verify your account, lengthen your video time, add 2 step verification (which was horrible and I went back in and removed it), add a password for ipad, etc.
They (youtube/google??) have been working on stuff because there is all kinds of new things the second day I tried to figure this out via their help/redirect links. ios mobile was there before and now it's gone, even though I did not choose/select it. But I have noticed that the ipad screen is much more sensitive than it was before the ios7 update. I don't even have to touch the screen for some things, it accepts and goes on it's own while my finger is hovering over the screen.
ipad2
ios7.0.2
Safari
YouTube
Google+The Title of my post, should really be....I have ipad2 with ios7.0.3 and Safari, I can't upload videos to YouTube because of Google? or ios7?
It's now November 1st. LOL 53 folks have read my problem and it only gets better. I pleaded with Google/YouTube via Feedback form (because they are one and the same now) to please add ios mobile back to Google 3rd party apps and after checking every single day, someone finally added it back for me. Yay! Then I asked if I needed to "revoke" Google+ in the 3rd party apps because some of the help files suggested Google+ is attached to your YouTube channel and might affect uploading of videos? For the life of me, I could not figure out how to get it off my YouTube channel. And the help files didn't take me to a place to change it. Upon checking 3rd party apps, I could no longer find the page they were on, and the Google+ app icon now goes no where.
Hey, but there are new menus with all kinds of statistics now about your account, like how many subscribers you have, what the average number of minutes people watch your videos,etc. Hmm... so I tried uploading a video and it worked. I got the message that ios7.0.3 with bug fixes was available a few days ago and updated to that. I'm back to, no longer upload videos, yesterday it was still freezing on the upload screen, where you add the title of your video and all of the specs, it appears to be half uploaded with a solid blue bar half way and goes no where. I have to close the app after an hour or more. I have rebooted a couple of times every day. Today it says, we could not upload your video, we did not recognize the format of this file. And when I go to YouTube and can see all of my videos, my subscriptions, I can not remove the videos that tried to upload, they are blank gray squares. A few days ago I could edit them out. I guess they are still working on it. These are the same self recorded videos, that I have been uploading for a year, same ipad. I have sent feedback to Google/YouTube once again.
I'm completely at their mercy. I have yahoo mail, so I can't send my videos via email, even though my channel has a special email address to send videos to for upload. Yahoo will not send a video more than a minute or so. I created an AT&T email address today, and it's the same there, will not send a 15 minute video. The upload link on YouTube no longer works, there on the same page with your special email address to mail your videos in, even though there is no email that supports a 15 minute video. My husband suggested video compressing program. I have not tried to upload from a PC, I do have icloud, so that may be my next route. Other forums say they/Google/YouTube are fully aware of it and are working on it. Still 30+ days in...
It's a shame these companies can't work together, it's a shame that there is no answer, because we all have these devices we spent hundreds of dollars on and want them to work. I have been searching the web for 30+ days and no one knows the answer. Hard to believe I'm the only person having this ipad issue. -
Third Party Tools To Upgrade WSS 3.0 to SharePoint Foundation 2013?
Since you cannot upgrade WSS 3.0 directly to SharePoint Foundation 2013 using just the SharePoint software, I wanted to look at 3rd party tools that automate the migration directly to 2013 without requiring an intermediate upgrade to 2010.
We have a simple WSS 3.0 farm with 2 SharePoint Servers and 2 SQL servers that are are load balanced so that the site stays up if any one of the servers goes down. It may be just round robin load balancing.
I'd like to see if I can determine if any of these migration tools would save enough time and effort for this type of environment to be worth the cost. It would be nice if we could do the upgrade all in once day instead of having 2 outages.HI,There are third party tools to upgrade sharepoint but not from wss 3.0 to directly sharepoint 2013.Its not at all possible as I know.Please find the below link that clearly explains the Upgrade process.
http://expertsharepoint.blogspot.de/2014/03/sharepoint-up-gradationmoss2007.html
Anil Avula[MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/
It looks like there are such products.
This one says it can be used to migrate directly from even WSS 2.0 to SharePoint 2013.
http://www.fpweb.net/sharepoint-2013/migrate-sharepoint-2003-to-sharepoint-2013/
I don't like that it doesn't indicate anything about pricing on the page so you have to call a sales rep and give away all your contact information before you can get a quote. I probably will not call them.
We would "like" to speed up the migration process and have only a single outage, but since the SharePoint environment is small, we will not be spending thousands of dollars just to save having to do two upgrades. We would probably end up just
going to 2010 and canceling the 2013 upgrade if needed. -
Error while creating the proxy object to connect to a third party tool.
Hi,
I tried creating a proxy object with the wsdl file. I even created a HTTP connection to the third party tool. but when I try to execute the whole proxy object, I am getting the below error. Can anyone help me on this?
"Proxy-Generierung: Fehler aufgetreten"
"Incorrect value: Entity "<<document>>"(92 /3788 ). end tag 'ul' does not match begin tag 'p'"
Thanks & Regards,
Veerabhadra Rao A.do a check on the wsdl file and how you are passing values in the proxy. The tags for XML are not correct. Open the WSDL in IE and see there must be an error. Or probably when passing the actual values to the XML generated each element is not closed properly. Error says tags dont match.
Edited by: Kshamatha Eda on Mar 5, 2010 10:54 AM
Maybe you are looking for
-
Setting up accounts for multiple users
Suggestions for allowing multiple users to access one account to avoid having to reimburse folks for every download on their work iPads?
-
Autorun on Macs from CD-Rom and Hybrid question
Hello all, I just got comissioned to design and develop a small flash-based CD-Rom project. The client is interested in having the CD-Rom presentation auto start/run when placed in the cd-rom drive. I know how to do this for a pc, but how would I acc
-
Adding a boolean field to an existing sbo table
hi everybody i want to add a boolean field to an existing sbo table. when i try to do it from the tools ... manage user fields i get only types like numeric string.. i dont get the booelan type does anybody know how can i do that thanks. for now i us
-
Just a heads up on verizon scam
I just wanted to give everyone a heads up that there is yet another verizon scam going around. Just got a call from (800) 888 9617 saying I have won the verizon price or whatever said I won $123 off my bill, then to log into vzw123.com. This is not
-
Dear sdn friends .how to add my company in sdn contributors corner.
dear sdn friends .how to add my company in sdn contributors corner.