BPS Copy plan data from one cost center to another using vairables

Hi experts,
I am trying to copy the planning data from one cost center to another in BPS.
I have just done it using a copy function and in the parameter group entering the costs centers for source and destinations.
What I am trying now it is to let the user select what this destination cost center could be.
I don`t know if this can be done using a variable. What I am thinking is; when the user enters executes the parameter group a pop-up appear that let him select the cost center for the destination.
May be this is not possible. Can you suggest me other ways of doing this?
Thanks in advance

Hi,
u can achieve this by creating a variable with the replacement type as  'User Defined Values'. You also need to enable the check box 'Input Allowed by user'. And at the planning level, in the 'Selection' tab, you should map the charecteristic (Cost Center) with the created variable. Same thing should be done at the planning package level.
Then, when you execute the parameter group, a pop-up comes asking for the value of the costcenter.
Regards,
Srinivas Kamireddy.

Similar Messages

  • Transaction data from one cost center to another cost center

    Hi All
    Can any one tel me how to move the Transaction data from one cost center to another cost center .
    My scenario is basically : Users posted for  company code 1003 for Cost center S00570 for the period 01.04.2007  to 30.11.2007 but it has to go to company code 1000  instead of 1003  for the same Cost center .S00570 .
    What we have done is that we have changed the cost center from 01.12.2007 on words to the correct company code 1000 and now all postings are going to the right company code ie
    to company code 1000.
    Now the problem is how to bring back the old historical data posted  from 01.04.2007 to 30.11.2007  to wrong company code the 1003 to correct company code  1000 .
    Is there a way to bring back the historical data which has posted to wrong company code .
    Thanks in Advance .
    Any help highly appreciated and points are assigned .
    Cheers
    Ravindra.

    Ravindra
    Once you have changed the company code in the master data, then the entries with respect to the different company code cannot be transferred. Please follow the process below and let me know if it works.
    1. Revert the cost center master data to the original company code.
    2. Repost the line items from this cost center to another cost center. Use tcode KB61. The cost center you will be reposting will be a routing cost center (say XXXXX).
    3. Once all the line items have been reposted, change the master data of the cost center to the correct company code.
    4. Again repost the costs from the routing cost center(XXXXX) to the correct cost center. You should have all the line items to the correct cost center now.
    For more on reposting refer the link below:
    http://help.sap.com/SAPHELP_470/Helpdata/EN/27/c98a46db7011d1a5400060086e9494/frameset.htm
    Let me know if it worked.
    Karthik Coneru

  • Hyperion Planning Employee move from one cost center to another

    Hello,
    I need to move employee from once cost center to another, is there anyway beside alternate hierarchy, please let me know is there any other way. I am using 11.1.2 EPM version.
    Thank you,
    TKhan

    Are you using out of box functionality of Workforce?
    You can use the transfer functionality to transfer employee from one Cost Center to another? If Cost Center is not your entity dimension then you need to customize the out of box rules a bit.
    How will alternate hierarchy help you in this case? Employee and Cost Centers are seperate dimensions or are they clubbed in one.
    I think it should be the former case, isnt it?

  • Concerning midi data in GarageBand for iOS: can we copy midi data from one virtual instrument to another?

    Concerning midi data in GarageBand for iOS: can we copy midi data from one virtual instrument to another?
    For instance: I play my "lucky take" on the virtual piano, and now I am curious how it would sound on let's say a organ. Normally I would select the midi content out of the piano track and copy it into the organ track. I cannot figure out how to do this in GarageBand for iOS. Is there anyone out there with a solution?
    Thanks!

    It is limited, how you can move regions between tracks. Basically, you can move between tracks with the same touch instrument.  See the help: http://help.apple.com/garageband/ipad/2.0/index.html#chsec12c15d
    Move a region
    Drag the region left or right to move it forward or back in time. Align the left edge of the region with the bar or beat on the ruler where you want it to start playing.
    Drag the region up or down to move it to another track with the same Touch Instrument. You can also drag regions between Keyboard and Sampler tracks, and between Audio Recorder and Guitar Amp tracks. Smart Drums regions cannot be dragged to another Smart Drums track.
    If you move a region so that it overlaps another region, the overlapped part of the “covered” region is deleted.
    Paste a region
    You can paste a region you have copied, or paste an audio file from an app that supports copying audio to the clipboard. GarageBand supports 44.1 kHz sample rate, 16-bit depth uncompressed audio files.
    You can paste copied regions to another track with the same Touch Instrument. You can also paste regions between Keyboard and Sampler tracks, and between Audio Recorder and Guitar Amp tracks. Smart Drums regions cannot be pasted to another Smart Drums track. Audio files copied from another app can be pasted to Audio Recorder or Guitar Amp tracks.
    Move the playhead to the point where you want the region to start.
    Tap the header of the track where you want to paste the region to select the track.
    Tap the track where you want to paste the region, then tap Paste.You can also tap an empty area of Tracks view, then tap Paste. In this case the region is pasted into the currently selected track.

  • Can I transfer data from one external drive to another using my MacAir as a platform?

    I am trying to transfer about 94 Gigs of data from one external drive (Touro) to another (Seagate) using my Mac Air which only has about 14 Gigs of available space.  How best can I accomplish this operation?

    Niel - I know that I must be a real dunce on this.  I tried opening the additional window on finder and then dragging and dropping from the Touro drive to the other open finder window for the Seagate drive.  Again, it bounced back.  What is NTFS? And how do I find if either or both of the drives are formatted in that manner?
    Again, thanks for you help on this.
    JC
    PS  I just got the info on the Seagate that it is Windows NTFS formatted.  What do I do now?  Is Paragon something I can download off the Internet?  Why, since I formatted the Seagate to run on my Mac Air would there still be a problem?  The packaging on the Seagate says it is compatible with Mac OS systems. jc

  • Can you transfer data from one numbers spreadsheet to another using conditional formatting?

    I have a tracker document set up for client payments and when I indicate payment received, it  flags green using conditional formatting. However I would like these to automatically transfer to another sheet - without having to cut and paste the associated data to the other sheet. Can I set up conditional formatting to do this? If not how could I get and automatic transfer?
    thanks forum.

    Hi Kangers,
    There are a number of ways to transfer data from one table to the next. It should not be hard to set up.
    Conditional formatting would not be involved it moving the data but you could set it up to flag the data in the new table.
    Without knowing what your tables and data look like it is hard to propose a solution.
    quinn

  • How do I copy a page from one Pages document to another using Pages 5.0?

    I posted this question on another page, and haven't recieved an answer to it yet. However I have found a temporary solution, so I am posting this here in case anyone else has a similar problem.
    The issue here is that I have just upgraded from Snow Leopard to Maverick (10.9.1), and my Pages also upgraded (to 5.0.1), altering my Pages documents. This is the issue, as as far as I can see the new Pages does not offer some of the basic needs that the old Pages did! In other words it is worse than the previous version.
    Using the upgraded new Pages 5.0.1 seems to result in some major editing problems for me. If you upgrade, make sure you KEEP the old version of Pages 09 (v 4.3). That is what has saved me!  If you have the same problems I have had - explained below, you will still be able to close the new version and open your Pages document in the old version, provided it is not a new Pages document. If it is, it will be possible to export it as a Pages 09 document and edit properly.
    After upgrading to the new Pages 5.0.1, when I open documents in Pages and try and copy a section from one document to another (easy before using the thumbnails) many of the Menu items previously available are visible but appear faded and are not possible, including Insert>Section Break/Page Break/Page Number and Edit>Cut/Copy/Delete/Undo/Redo
    This even happens if I duplicate the Pages document and try and do any of these from the Duplicate (which should be an easily editable copy).
    My solution has been to simply open all Pages documents that Iwant to edit (or may want to edit in future) in the old Pages app (v 4.3), which I never got rid of. That has meant I can continue editing and copying a section (of 1 or more pages) from one Pages document to another.
    If anyone reading this has figured out a way to edit Pages documents using the new version 5.0.1 please post an explanation, and I will try it!

    And there are those who don't like me repeating the same message over and over again in this forum!
    Apple has removed over 90 features from Pages 5.
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
    Pages '09 should still be in your Applications/iWork folder.
    Archive/trash Pages 5, after Exporting your files to Pages '09, and rate/review it in the App Store, then get back to work.
    Peter

  • How to move statistical postings from one cost center to another

    Hi All,
    We have some statistical postings done to an incorrect cost center. Now we want to move them to the correct cost center.
    I know there is some way of doing it by making debit and credit entries to the G/L account in FI where the postings intiated, but I am not sure about the whole process.
    Any help is highly appreciated.
    Thanks.

    hi
    I am not very sure if there is any entry for reversing statistical posting in Controlling.
    You can do the same through FI entry itself.
    Regards,
    Suraj

  • How to Copy customizing data from one company code to another company code

    Hi
    Big Boss opened a new company, we need to implement SAP system for this new company. this new company has same business with our one old company. so, we may almost use old the company customizing data for this new company. anybody can tell me how to copy the customizing data.
    Regads
    Henry

    Hi, Paraschand G
    Thank your very good solution as BC Sets. I had general knowledge on Rollout and BC Sets now.
    How ever, I have a problem on creating my first BC Sets. Should I creat a BC Sets as my template via copy existing customizing data? I seen some existing BC Sets which arenot I want. We implemented big5 modules for some company codes. I want to copy one of them as my BC Sets template. I won't create it manually because I worried about I will miss some data if I select these data one by one. I cannot find out a Full-BC Sets template contains all customizing data. Could you please give me some guide. I cannot ensure my understanding of BC Sets. Please correct it if I have wrong idea.
    Regards
    Henry

  • Copy Transactional Data from One Company Code to Another

    Hi Gurus,
    I have a peculiar requirement.  Searched thru the forums but did not got any clue.
    My client wants an Existing Company Code (ABCD), that is in use since past 2 years and have sizeable chunk of Transactional Data to be stopped for use.  The requirement is to stop using the existing Co Code ABCD and Transfer all the Transactional Data to a New Company Code (WXYZ).
    Any clues how to achieve this.
    Many Thanks...

    Thanks for your revert.
    is there an easier way to de-associate the Co Code from the Chart of Accounts.  I will have to convince my client on using the Same Co Code with different CoA, hope they should be fine.
    I believe I will have to go thru the detailed process of Resetting Transactional Data for Co Code, even this would be massive.
    What would you advise?
    Thanks Again...

  • Using FDM to transfer data from one HFM app to another

    We are facing a project in which we need to load data from one HFM app to another. There're some mapping going so it was advised that FDM be used.
    However, the HFM extract files contain all data on the rows. While for the FDM multiload, the data from different periods need to be layed out on the columns. Also, we have multiple scenarios/years of data to handle. What would be the best approach? Has anyone had similar experience to load data from one HFM app to another using FDM? Thanks!

    It appears that this is some kind of migration project due to the scope of the data contained in the single file? If so whatever you do is like ly to be trow away once the migration of data is completed.
    You have a couple of options:
    1) Get the data extracted from HFM in multiple files instead of one bulk file, broken down by scanario,year & period
    2) Take the single data dump file produced by FDM and manipulate it yourself to get the data in a more usuable format for processing through FDM.
    Option 2 could be achieved via any ETL tool or a custom file parsing script. What may be more attractive to you and allow you to fully leverage your investment in FDM is that you could use the PULL adapter that ships as part of the FDM adapter suite to perform this transformation exercise. The PULL adapter takes a flat file input and allows you to use all the in built functionality of FDM to transform it and output a modified flat file (or series of flat files). You could use it to produce multioload files or a series of files broken down by scenario,year,period.
    Whatever you do I would suggest that break the single data file down into smaller chunks as this will help with the iterative debugging process you will inevitably have to undetake whislt migrating the data to the new application.

  • Reposting of Planned Line Items from One Cost Ctr to another

    Hello SAP Gurus,
    Can you tell me the process hoe We can repost planned line items from one coct center to another ?

    Hi,
    You can use Transaction code KP06 to update the changes to the plan data for the Cost Centers. There is no separate transaction code to repost plan data for Cost Centers.
    Thanks
    Murali.

  • Copy billing plan lines from one sales document to another

    HI,
    we want to copy the open billing plan lines from one sales document to another, which routine should we use in the copy control in configuration?
    we tried to use,401 and 402 but with no success..
    it's should'nt be a standard process with out any development?
    Best Regards
    Yehudit

    Hi,
    Check where you entering this routine
    If your billing plan at header then enter it at header in copy control, if billing plan is item level then maintain at Item level in copy control
    Kapil

  • Copy data from one SAP system to another based on conversion rules

    Hi All,
    Please provide your input on how can we copy data from one SAP system to another based on conversion rules.
    Conversion rule :
    vkrog in 110  vkorrg in 120
    1234            4567   
    <<text removed>>
    Thanks
    Edited by: Matt on Feb 16, 2009 4:35 PM

    Please read the Rules of Engagement here: Please read "The Forum Rules of Engagement" before posting!  HOT NEWS!!
    Please note that offering points is against the rules.
    matt

  • How to copy the data from one database to another database without DB link

    Good Day,
    I want to copy the data from one database to another database with out DB link but the structure is same in both.
    Thanks
    Nihar

    You could use SQL*Plus' COPY command
    http://technology.amis.nl/blog/432/little-gold-nugget-sqlplus-copy-command
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14357/apb.htm#sthref3702
    Edited by: Alex Nuijten on Sep 16, 2009 8:13 AM

Maybe you are looking for

  • Java.util.ResourceBundle VS java.util.Properties

    I want to keep some key values pair outside program in a properties file and use that in my program. There is no requirement of localization. Should i use ResourceBundle or Properties class? Previously I have used Properties class for this purpose bu

  • Getting bad argumnet error when using UTL_MAIL.SEND_ATTACH_VARCHAR2

    HI This is my code. I dont know what I am missing. Please advice. RK begin UTL_MAIL.SEND_ATTACH_VARCHAR2( sender => '[email protected]' ,recipients => '[email protected]' ,cc => null ,bcc => NULL ,subject => 'RE: Testing Attachment' ,message => 'Dear

  • Performance issues - Log file parallel write

    Hi there, Since a few months I have big performance issues with my Oracle 11.2.0.1.0. If I look in the Enterprise manager (in blocking sessions) I see al lot of "log file paralles writes" and a lot of "log file sync" . We have configured an active da

  • Load balancing URL setup for planning application 11.1.2.1

    Hi Gurus, There is an existing planning environment with Weblogic/ Oracle HTTP load balancing setup. I just would like to know where would exactly be the generic/ common URL (the URL without actual servername) configured for planning and SmartView? I

  • Macbook pro 2.16 running very hot. Is there a fix?

    Hi My MacBook Pro 2.16 17" is running very hot all of a sudden. anyone know what causes this?  Is there a fix?