BPS Flat file load ABAP objects migration error.

Hello
We are trying to load a flat file via the SAP-GUI and BPS and everything works well in DEV based on the HOw-TO guide. When trying to move the ABAP objects to QA, we get a migration error on the type /1sem/_yth_data_260ZBYAPEPL. Of course the 260ZBYAPEP is relevant to our configuration and in QA we do have the equivalent structure /1sem/_yth_data_614ZBYAPEPL.
How come the type in DEV does not translate to the equivalent type in QA just like any objects we transport to QA?
Thank you all.
YB.

Dear YB,
the element /1sem/_yth_data_260ZBYAPEPL has to be changed according to the QA manually only. Sytem can't change the clent no. automaticaaly when u transport to the QA.
so in /1sem/_yth_data_260ZBYAPEPL replce 260 with ur QA Client no.
Narendra Reddy

Similar Messages

BPS Flat File Upload Error Messages

Hi,
I am using the BPS flat file upload and am getting error messages. These error messages are coming from the user exit in the characteristics relationships. Unfortunately the message does not indicate which line on the upload file the error is for. In the user exit it does not pass the line no of the flat file that is being processed.
Does anyone have any ideas how the message could be enhanced to indicate the line in error or if there is another exit I could perform the validation in?
regards
Paul Cairncross

Hi Sai,
The issue is not the particular message. The message is in fact my message in the user exit in the characteristic relationships. The issue is when using the flat file upload the message does not indicate which line in the file the message apply's to. Looking at the userexit no line number is passed. This is not a problem in the web as the specific line is highlighted when the user is keying in the data.
Regards,
Paul Cairncross

Unit Code, Commercial Code - Flat File loading vs BPS Loading

Hi SDN Community,
Recently, we have moved our flat file loading to be performed by BPS interfaces.
During flat file loads, the Commercial code of all units of measures, are verified.
eg.DAY
But when loaded by BPS, the UNIT code is verified.
eg. TAG.
In the display of the BPS upload, it displays DAY which is the commercial code.
The only thing, is the customer is forced to use TAG in the BPS upload files.
They wish to create another record in the transaction
CUNI to be
Unit code = DAY
Commercial code = DAY.
However, i have found that we cannot allocate the same commercial code to another unit code.
Is this a design constraint, or a process error that i am doing.
Thank you.
Simon

04.01.2010 - 02:22:53 CET - Reply by SAP
Dear customer,
As i do not fully understand how this works, but the base table T006A
has 2 entries, 1 for english, 1 for German, should it not be that the
English EN entry field be working rather that the German DE, hence DAY
should be used? Can you please confirm my understanding on this?
>>> If you check my attachment "SE16.xls", you can see that it's for
language >>English<<, and the internal format is TAG while the external
format is DAY.
- Are there any plans to modify the BPS functionality in newer SAP BW
versions to allow the customer to indicate the same UOM as per flat
file laods? Or is an upgraded Support Pack that allows this?
- If not, would it be possible to make any customer enhancements to
allow this to take place depending on customer requirements.
>>> There is no plan at this moment to change this BPS functionality
in newer SAP BW versions or support packages.
We really recommend you to use internal format TAG in the upload file
in BPS which I think should be acceptable and feasible to you. All
other ways trying to use external format is risky and we cannot assure
you that it will work well as it's not SAP standard function. (I think
it's not worth the risk as the standard function which requires
internal format should not be too unacceptable)
Thanks for your understanding.
I also don't think my BC-SRV-ASF-UOM colleague would be able to help
you a lot regarding this.
Best Regards,
Patricia Yang
Support Consultant - Netweaver BW
Global Support Center China
SAP Active Global Support

Error in Flat file loading....

Hi All,
I tried to load data from a flat file, I got the following error :
u201CError in conversion exit CONVERSION_EXIT_CUNIT_INPUTu201D
What does that mean?
Actually when i used ; as the separator it loaded few data fieds, rest all were blank.
and when i used , as separator it was showing the above error.
So i think the problem is in the format of the file.
Can anyone tell me how can i format to overcome this error.?
Thanks in Advance.
Regards,
Chitra.

hi,
check this threads,
Hi, See below link
https://www.sdn.sap.com/irj/sdn/directforumsearch?threadid=&q=conversion_exit_cunit_input&objid=c4&daterange=all&numresults=15&rankby=10001
hope this helps you ..
reagrds,
shikha

What are the settings for datasource and infopackage for flat file loading

hI
Im trying to load the data from flat file to DSO . can anyone tel me what are the settings for datasource and infopackage for flat file loading .
pls let me know
regards
kumar

Loading of transaction data in BI 7.0:step by step guide on how to load data from a flatfile into the BI 7 system
Uploading of Transaction data
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( Transaction data )
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to create ODS( Data store object ) or Cube.
Specify name fro the ODS or cube and click create
From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
Click Activate.
Right click on ODS or Cube and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used.
Loading of master data in BI 7.0:
For Uploading of master data in BI 7.0
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to select Insert Characteristics as info provider
Select required info object ( Ex : Employee ID)
Under that info object select attributes
Right click on attributes and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.

BPS Flat File upload

I have used the How To Paper for BPS Flat File update and it does not give me any error when I run,
but I don't see the data in the cube, How can I validate if the data from the flat file was updated or inserted.
Thanks
Jagraj Dhillon

Hi,
REDDY is wrong is his explanation, sorry.
There are two How to papers ... One for Web file upload, the other for SAPGUI file upload.
Which one did you use ?
If you want to be sure that the data loading is successful, you can :
- use the transaction LISTCUBE to check the content of the cube
- or first commute the cube to background loading, commute again to BPS loading, then load the data. If new data arrived, then you get a new yellow request in your cube.
Regards
Laurent

How to upload data from flat file to datastore object in BI 7.0

Dear friends,
Please tell me
step by step process for upload data from flat file to datastore object in BI 7.0
<removed by moderator>
please help me
Thanks,
D.prabhu
Edited by: Siegfried Szameitat on Aug 17, 2011 11:40 AM

Create transformation on thr data source and keep the DSO as the target and load.
Ravi Thothadri

Best practise around handling time dependency for flat file loads

Hi folks,
This is a fairly common situation - handling time dependency for flat file loads. Please can anyone share their experience around handling this. One common approach is to handle the time validity changes within the flat file where it is easily changeable by the user but then again is prone to input errors by the user. Another would be to handle this via a DSO. Possibly, also have this data entered directly in BI using IP planning layouts. There is a IP planning function that allows for loading flat file data but then again, it only works without the time dependency factor.
It would be great to hear thoughts or if anyone can point to a best practise document for such a scenario.
Thanks.

Bump!

Flat File loading Initialize with out Data transfer is disabled in BI 7.0

Hi experts,
When loading through flat file in BI 7.0 for Info Package Level Initialization Delta Process with data Transfer is coming by default,but when i want to select Initialization Delta Process without Data transfer is disabled. (in the creation of Data Source (flat file) in the Extraction Tab Delta Process is changed to FIL1 Delta Data (Delta Images).
please provide me Solution.
regards
Subba reddy.

Hi Shubha,
For flat file load please go throught he following link:
http://help.sap.com/saphelp_nw70/helpdata/EN/43/03450525ee517be10000000a1553f6/frameset.htm
This will help.
Regards,
Mahesh

Flat-File Loading problem

Hi Friends,
I am struggling with flat-file loading problem. I am trying to load a .csv file into data target. I took all pre-cautions while loading data. I look into preview and simulate the data. Everything is ok, but when i schedule the data, i found 0 records in the monitor. The following is the STATUS message of the above problem:
   No data available
Diagnosis
The data request was a full update.
In this case, the corresponding table in the source system does not
contain any data.
System response
Info IDoc received with status 8.
Procedure
Check the data basis in the source system.
         Can anybody help me what is the problem and procdure to resolve it?
Regards,
Mahesh

Hi Eugene,
Thanks for the quick reply. The following screen-shot tells you the messages of detail tab;
OVER ALL STATUS MISSING WITH MESSAGES OR WARNINGS
REQUEST: MISSING MESSAGES
EXTRACTION
EVERYTHING IS OK
DATA REQUEST RECEIVED
NO DATA AVAILABLE DATA ELECTION ENDED.
PROCESSING
NO DATA
           The above message was shown in details tab. Pls guide me to locate the problem.
Regards,
Mahesh

Transformation not generating-Flat file loading

Hello guys, I hope you can help me with this little confusion I have on BI7 Flat file loading.
I got a File (CSV) on my workstation. I am trying to load Master Data. Here is the example of my file and issues:
Lets say, I have CSV file named "CarModel.CSV" on my PC.
This excel file has 10 Records and No atributes for this Field.
So the records should show like this and it is showing correctly in PSA level, DS level.
A
B
C
D
E
F
My goal is to load Flat file data to InfoObject (inserted in Infoprovider)
I created Source system, DS, all thats stuffs.
I am now on Display DS screen under Proposal Tab. I am putting 10 Records to show and hitting Load example data....it works fine by showing all 10 records. However in the bottom part of this screen, what should show as a Field ?In my case , First it was showing the First Record ("A")...i didnt think it was correct but i prceeded anyways. Transformation could not be generated.
I tried by deleting "1" from the field "No. of header rows to be ignored" and its the same result ..No transformations.. I mean i know its very simple to load this data but i am not sure what i am doing wrong..My question is:
1) What should show under Field/propasal tab in my case?am i supposed to create this Field?
2) Should the system to propse the field which is from my flat file header ?in my case i dont have any header..should i have include header in my csv file like "car model"? i am confused please give me some info thanks
dk

Hi,
In filed tab, u have to enter ur infoobject names in an order...and press enter it'll automatically give the description and its other factors...
i guess u shuld have some header in the sense eg: customer,cust ID like this..this only u have to enter as fields...in proposal tab...try that
rgds,

Hierarchy from flat file loading with errors - duplicate node names

Hello experts,
I am loading a product hierarchy from a flat file into a custom hierarchy
object. The issue is that it errors out saying I am loading
duplicates within nodes, however all node IDs within a level are unique.
It seems to be looking at the node name to determine uniqueness and I know
we have some duplication within the text there especially when you factor
in the 32 character limitation for the node name. Does anyone have an idea
as to whether it is possible to have it only consider the node ID instead
of the node name to determine uniqueness?
A colleague suggested using the link ID to fix this problem but I don't know how that field works or how to populate it.
I'm working in a BI 7.0 environment (I don't know if that makes a difference since you still have to use the 3.x objects to extract the hierarchy).
Any help would be appreciated.
Nancy

Hi Nancy,
You may wish to check this OSS Note 1026749 - Hierarchies: Consistency check for duplicate nodes and 912115 (old one)
Symptom -
When you load or activate a hierarchy it terminates with error message RH 109 or RH 211. The hierarchy contains duplicate nodes and this is not allowed. The long texts of messages RH 109 or RH 211 do not describe the reason for the problem sufficiently or they are partially incorrect.
There is uncertainty about in which cases duplicate nodes exist in a hierarchy and in which cases duplicate nodes are allowed.
Hope this helps,
Bye...
Naga Timmaraju

Error while creating process chain for flat file loading

Hi All,
I had Created a process Chain to load Transactiion data(Full load) form flat file which is in my computer.
start>Load>DTP>DeleteIndex>DTP loading CUBE--> Create Index
but the system is throwing an error as "An upload from the client workstation in the background is not possible."
I dont know why this error is coming?
Can some one help me
Regards
Mamta

Hi Mamta,
Basically if you want to load the DS through FF using process chain, the FF has to be placed in Application server. We cant load the FF when it is located in the client local workstation(FF On your PC).
So better you remove the Infopackage step from the PC. Load the IP manually. Once it is completed you can start the process chain with the following steps:
start>DTP>DeleteIndex>DTP loading CUBE> Create Index
Hope it is clear & helpful!
Regards,
Pavan

Error in flat file loading in data targets

Hi,
when im loading the data from flat file
"information missing for currency translation into internal format" this error is coming when doing schedule.
can anyone pls help me,im new to SAP BW.
Thanks,
sita

Hi Guptha,
I took 0AMOUNT so 0CURRENCY is assigned automatically.
0currency I kept GBP, INR.
If any solution pls help.
Thanks,
sita
Message was edited by: sita yerram

Flat file loading error

Hi,
I have load master data through flat file . Now i am trying to create transaction data source but getting a error.
Data Consist of Custid, Qty,Sales Revenue
Qty consist 0Unit and Sales Revenue consist 0Currency
When i enter Qty..the format is internal
When i enter Sales Revenue..the format is external
even after changing sales revenue format to internal..i am getting the below error.
When i click on Preview i got this: Error 'Unit 100 is not created in language EN...' at conversion exit CONVERSION_EXIT_CUNIT_INPUT (field UNIT record 1, value 100)
why i am getting this
Thanks
nikhil
Edited by: nikhil29 on Jan 19, 2012 10:20 PM
Edited by: nikhil29 on Jan 19, 2012 10:27 PM

Hi Nikhil,
The simple solution to this is,
Go to SE37 and use FM CONVERSION_EXIT_CUNIT_OUTPUT here give the input as whatever value you are currently passing to 0unit field through excel file. Execute the FM and check the output, if you get the successful output then copy the 0unit code shown in the output and replace it with unit field value written in the flat file (mostly it will be 2 digit code e.g. for unit BAG the code will be BG).
Here you will have to pass the valid unit value which will be converted to correct internal format. You can try different units by above method and you will have to use any of those units for which you are getting successful output.
Regards,
Durgesh.

BPS Flat file load ABAP objects migration error.

Similar Messages

Maybe you are looking for