BPS: how to restore modified standard planning level into orignal content l

Hi Expert,
Can you plz explain how to restore modified standard planning level into orignal content level.
Thanks
Ajay Kumar

Hi,
Please check the link. It miht help..
[Unable to View Standard Planning Functions]
Thanks
Pratyush

Similar Messages

How to restore the Standard Toolbar,that I deleted by mistake?

I was trying to remove some toolbars, by accident I removed the standard toolbar(view,edit,etc) I can not bring it back, what can I do?
Thanks.

For details of how to restore it, see the [[menu bar is missing]] article.

How to write data from planning folder into a planning cube in BPS

Hi All,
I have an issue in writing data from planning folder to planning cube.
I updated the excel sheet in planning folder in UPSPL tcode.
After clicking on save button in the excel sheet the data did not get updated into the cube.
I set the real time cube to planning mode.
Please let me know if there are any settings to save the data to cube or how can it be done.
Thanks in advance.
Regards,
Lavanya.

Hi Lavanya,
What do you mean by "the data did not get updated into the cube" ?
Don't you find a yellow request in the cube administration transaction ? What happened if you set it to green ?
Regards,
Fred

How to enhance/modify standard module in PBO

hi
In Program SAPLBARM
screen no. 0800
i want to add my code in PBO MODULE set_dynpro.
can you post your valuable replies with the procedure how to add my code.?
shall i go for access key, or with enhancement.
note: when i tried to add code with new enhancement it is giving syntax error.( because we have to add code in module ... end module)
standard code is:
IF rm61b-budat IS INITIAL.
    MOVE sy-datlo TO rm61b-budat.
ENDIF.
IF rm61b-bldat IS INITIAL.
    MOVE sy-datlo TO rm61b-bldat.
ENDIF.
Mycode will be
IF rm61b-budat IS INITIAL.
    MOVE space TO rm61b-budat.
ENDIF.
IF rm61b-bldat IS INITIAL.
    MOVE space TO rm61b-bldat.
ENDIF.
waiting for replies
Thanks
surya

Many thanks for your help.
I managed to set a new standard web template based on 0ADHOC but now I've found a new issue: in the WAD, I have created a new web template also copied from 0ADHOC. This web template will embed a query and the web report will be executed from WAD, not from BEx. The problem is that the different buttons (Save View, Bookmark, Variable Screen, Export Excel, Export to CSV, etc)don't seem to work when I click on them once the report is showing the results.
Can you please give me any idea on what's happening and if there's anything else I should do?
Many thanks in advance.
Inma

How to restore my old hard drive into a new hard drive using my time machin

My HD in my Mac Book died. Thank to the apple care Apple change it to me.
Now I have a new HD with nothing on it.
How do I use the backup in the Time Machine to restore my old hard drive?
As far as what I knew I am supposed to have all my old data, applications, and more by doing something with Time Machine.
Thanks

hi,
i have been through this. First if apple techs replaced the drive you do have something on the drive. your internal drive can boot the machine although your user settings, network settings and third-party software applications are net set up.
here's what you do.. connect the time macine drive and turn it on. now boot your macbook. watch the 'welcome movie' and don't panic. you will recieve setup instructions from the macbook. you will of course designate the system language to be english. Now an option screen will appear. there are options for setting up the new computer include using a firewire cable and transfering stuff from another macbook. ignore that option. you will see an option to restore settings from a time machine drive. bingo! choose that.
get the transfer started and go away. usb restoration of big internal harddrives by time machine is **** slow. (it should be slow for alot of technical reasons. don't blame apple.)
make sure you have the macbook plugged into an electrical outlet, not running off battery because this can be an overnight process.
so now you're good to go

How do I get Electrical Plan Symbols into my Acrobat Pro?

I do a lot of test reports and layout revisions of Electrical Plans, and I need to be able to stamp electrical symbols in PDF's such as Receptacles... Switches... etc. Is there a plug in I can download or an easier way to do this?

Some suggestions from a similar question over at the AUC's Acrobat Answers.
how do i get a electrical legend symbols (Edit PDF)
Be well...

SAP Standard Scripts ( how to Modify Standard Scripts)

hi every one , This is Abdul Rahman , i want to know how i should modify Standard SAP Scripts like RVORDER01 or MEDRUCK SCRIPTS ,i want to know whole process . and how to Run the Script . plz any kindly send some good DOC or web pages which i can acess
thankyou
Abdul Rahman

Hi,
Modifying SAP Forms
If you want to modify SAP forms, set up your development environment as follows:
Make sure that no SAP-standard forms are stored as client-specific copies in your development client.
Such forms should be held only in client 000, the SAP development and installation client. If you access an SAP-standard form from another client, then the central copy in client 000 is used.
If you need to remove SAP-standard objects from your development client, see Notes 10388 and 3355 in the SAP Online Service System (OSS). These notes explain the procedure for saving modified forms and then deleting all forms.
To modify SAP standard forms,
Copy the forms you need from client 000 to your development client.
Rename the forms using a name from the customer name reserve (names starting with Y or Z).
Copy the forms to one of your own Y or Z development classes.
Renaming the SAP standard object makes it possible to manage and transport your changes with the SAP workbench organizer. The organizer is not activated for SAP-standard objects that are modified in clients other than 000.
To put your modifications into effect, you must also modify the ABAP print program used to print documents that use this form. You should rename such print programs and store them in your own Y or Z development classes.
You can use the SAP Customizing System to replace the SAP print program with your modified print program in the affected applications.
Forms: Concepts
Forms are used to control the page layout and also the text formatting in your documents. Before formatting a document for output to the screen or to a printer, you must assign a form to it. If you do not specify a form for a document, then the SYSTEM form is assigned to the document by default.
Application-specific forms are used in SAP applications to specify the page layout for such special documents as invoice or checks. These forms specify the structure of the information on the page(s) of such a document. They define, for example, the address header, item lines, the footer, and so on.
There are two ways to format texts with forms:
In the standard SAPscript text processing (Tools ® Word processing ® Standard text), you can select a form for a document. You can then type text into the main window of the form and output the document in the format defined in the form.
For example, you can select a form for a letter. You can then type the body text of the letter in the main window. When you print the letter, the default text elements in the other windows of the form (heading, footer, and so on) are printed with the body text.
A document can be generated by a print program in one of the SAP applications. The print program uses a form to generate the document. Most correspondence and document generation in the SAP System are handled by way of print programs.
A print program selects the text elements that are to be printed in the windows of a form. It may also collect information from the user or ask the user to input text directly, as in some correspondence functions. The print program may also provide data for variables defined in the form.
Finally, the print program uses the form to format the document for display or printing.
Check this link...
http://help.sap.com/saphelp_erp2005/helpdata/en/d1/802d7d454211d189710000e8322d00/frameset.htm
Thanks and Regards,
Bharat Kumar Reddy.V

Planning Level Root Question (Periodid Vs Monthly)

Hello,
I have a question related with planning level configuration.
In the standard SAP Planning area
SAP2 - All the planning levels have been defined monthly attribute as the root for time
SAP4 - All the planning levels have been defined periodid attribute as the root for time
What is the difference between both type of configuration. (Selecting Monthly / period id as the root, what difference it creates and how it affects other areas)
I was testing consensus demand key figure in SOP 3.0 and I am unable to edit the key figure value in my planning area (KF value change in Excel) which is a copy of SAP4 planning area. Initial response from SAP OSS is to modify the planning level and use monthly instead of Periodid (But I have just copied the standard SAP4 planning area).
Uploading the key figure using KF template works fine but issues comes only when I tried to change the value in Excel or try to input new values in blank cells.
Same thing I also tested in IBP 4.0 FP1 Patch 1 and configuration is exactly the same as SOP 3.0 (Both SAP2 and SAP4 planning area) but I am able to modify consensus demand key figure in both the copied planning area (Copy of SAP2 and SAP4) irrespective of monthly / periodid selected as the root.
Please let me know if you have observed this before and what are your feedback/suggestions.
Thanks
Girish

Hello,
I have a question related with planning level configuration.
In the standard SAP Planning area
SAP2 - All the planning levels have been defined monthly attribute as the root for time
SAP4 - All the planning levels have been defined periodid attribute as the root for time
What is the difference between both type of configuration. (Selecting Monthly / period id as the root, what difference it creates and how it affects other areas)
I was testing consensus demand key figure in SOP 3.0 and I am unable to edit the key figure value in my planning area (KF value change in Excel) which is a copy of SAP4 planning area. Initial response from SAP OSS is to modify the planning level and use monthly instead of Periodid (But I have just copied the standard SAP4 planning area).
Uploading the key figure using KF template works fine but issues comes only when I tried to change the value in Excel or try to input new values in blank cells.
Same thing I also tested in IBP 4.0 FP1 Patch 1 and configuration is exactly the same as SOP 3.0 (Both SAP2 and SAP4 planning area) but I am able to modify consensus demand key figure in both the copied planning area (Copy of SAP2 and SAP4) irrespective of monthly / periodid selected as the root.
Please let me know if you have observed this before and what are your feedback/suggestions.
Thanks
Girish

Affect of a new planning level selection

Hi,
we have a BW-BPS environment with lots of BPS functionalities, palnning sequenses, save, copy functions...
Until now we have all products from SAP R/3 extracted.
Newly there are now in SAP R/3 lots of small products. Planning people donu2019t want to see and plan all products in planning layouts. They want to see to plan only the "important products".
The following solution is thought.
we will create a product hierachie with 2 hierarchie node: "important products" and "small products".
the hier. node u201Cimportant productsu201D should be used in all planning levels in selections.
How can it (selection in planning level) affect the current planning functions ?
What would you suggest here?

Hi,
Planning functions are assigned to just one planning level. So if you have planned to restrict the values using Hierarchy at planning level, then the underlying functions will apply only to that hierarchy members.
regards,
Lokesh Nandula

How to find the standard queries in business content

hi
pls explain how to find the standard queries in a business content
assign full points

Hi,
Incase you want to know details about the standard queries, then the best source would be the help documenations on BI content:
http://help.sap.com/saphelp_nw2004s/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm

Modifying standard script

helo experts i modified standard script medruck into some zscript and i made some changes but its not showing the changes in the print preview why?and whats is the ME9F can any one explain the steps for modifying a standard sap script as per the requirements?or if u show any link it will be helpful...

Hi,
You need to go to transaction NACE and replace standard SAPScript with your custom SAPScript.
Path: NACE -> Select EF (Application) -> Click Output Types button -> Select NEU (if you use standard one) -> Double click on Processing Routine -> Click Change mode -> Replace Medruck with your custom SAPScript -> Save.
ME9F is the standard program to create PO message output. In your case, perhaps it can be used to generate and/or print SAPScript.
Regards,
Ferry Lianto

HT4113 How to restore iPad mini 2

How to restore a disabled iPad

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. If you did not do step 4 properly, start all over again.

Loading non sap planning data into BWBPS

Hi BPS Gurus,
I'm new to BPS I want to load hyperion planning data into BWBPS Could you suggest me how to do it.
Thanks in Advance.
Thanks & Regards,
Bhaskar.

Hi raki,
My mail id is
[email protected]
Regards,
Bhaskar.

How to transfer data between planning functions in BPS

Hi All,
I have requirement, where user will enter the sales qty plan in manual planning function and need to read the zinfo object to distribute the sales qty accordingly to manufacturing plant and push into infocube.
To fulfill above requirement, i'm thinking to create one manual plan and user will enter the total sales qty and create one more exit planning function to distribute the sales qty for each plant.
For above approach, i need to get the data enter in mannual planning function to exit planning function.
Can anyone let me know how to transfer data from one planning function to other planning function under same planning level and package.
Thanks you,
santosh.

Hi Santosh,
You can achieve the Distribute functionality using the Standard Planning Function for Distribute (Refer SAP Help for details).
Moreover you would not have to do anything specifically to transfer data from one Planning Function to another. The application picks up the latest data records for processing whatever Function you are executing. If you want to execute a series of Planning Functions you could use a Planning sequence to achieve the same.
Hope it helps

Current View as filter in BPC Vs Planning level and package in BPS

Hi,
     If I understand correctly, the current view is as like a filter in BPC as planning level and package in BPS, by comparing then I notice that the value for current can only be single value while in planning level and package we can have range, multiple value of single value.
    Let's have a planning scenario we need to planning for every month based on the actual month data,
in BPS we can easily configure two type of columns with actual and planning data, while in BPC, since the current view only allow single value, we have to copy the actual data to planning data, then with the category set to planning, we can do our planning. Of course if there is hierarchy, we can use parent to allow to display all the child.
   The other option is to use the EvGTS function which can retrieve the data outside the current view.
   Anybody have other though on this?
Edited by: JW on Jan 7, 2009 5:51 PM
Edited by: JW on Jan 7, 2009 6:25 PM

Hi JW-
I did not mean to imply that the Current View (CV) is not a filter. It can definitely be used to filter data presented from an EVDRE as well as other Ev functions, just like filters in BPS and IP. However as a developer you have the option to use the CV or, through your configuration, disregard and/or override the CV settings.
One example of disregarding CV settings is using standard Excel functions to provide the user a dropdown list from which to select certain dim members. The drop down box selection could be used instead of the CV for defining Ev function selections. My point is that you have multiple design paths of controlling what data is selected/processed; you are not only limited to the CV values. From a performance viewpoint, you are correct in assuming that limiting the data selection will greatly impact overall performance. Using the CV to limit data selection to enhance performance is very valid approach, just be aware that there are several alternative ways (other than using CV to control data selection) available to the developer.
-Sheldon

BPS: how to restore modified standard planning level into orignal content l

Similar Messages

Maybe you are looking for