BPS planning strategy need to change

Hi all;
I am in a project where we maintain all the planning in a specific version. there is a InfoObject called ZBPS_VERS and we have maintained some master data manually in BPS for example CE (Current Estimate) and this infoobjects are used in all layouts and uploads. All the data for the currect estimates are planned and saved on this version, end of every quarter we copy that into different version and do locked that for unchanged and do the retraction. We don't want anyone changing their data into CE during our retractions...so technically we have lock that CE also for planning, all the validation and stuff...it takes about 3 days...and during that time non of the planner can use this system. I find this design is not really good also when we do the actual copy into SEM we also close that version...this is creating too many days in close and system is not too effective...so I questions myself why do we even have to close the system (we lock CE but sent message to the planners saying the system is closed for 3 days) because they can't planned on CE.
Any one pls give me some good suggestions...as we are moving towards the upgrade I would like to propose a new design...where we should have to close the system.
Thanks.
regards:
Nitik.

Hi Nitik,
If the above solution is not feasible to you, then you can also try using a Multiprovider and populate the CE data into a different cube. During retraction period, the load behaviour of this cube can be changed to 'only loading' and 'no planning'.
regards,
Lokesh Nandula

Similar Messages

HT5622 I have been using one apple ID for my family as it makes it easier to manage itunes purchases/rentals on all of our devices. Now that my kids are getting old and my wife has recently purchased an Iphone, I can see that I need to change my strategy

I have been using one apple ID for my family as it makes it easier to manage itunes purchases/rentals on all of our devices. Now that my kids are getting old and my wife has recently purchased an Iphone, I can see that I need to change my strategy. I plan to add a few more iphones to the family very soon. What is your recommendation to manage all of our devices (iphones, itouch, apple tv) for my family? Can I continue to function with one apple ID or is it time to take the leep into attempting to manage multi-apple ID's?

There's a few ways of managing multiple devices on a single computer (and keeping seperate content on each). The following document is worth checking through:
How to use multiple iPods, iPads, or iPhones with one computer

Planning strategy change from 52 to 20

dear all,
my client wants to change the planning strategy from 52 to 20, if we change the strategy what are all implications it will affect,kindly explain what are the things we have to check in PP,QM,MM and FICO modules
it will be very helpful if it has explained by individual modules
regards
thyagarajan
Message was edited by:
thyagarajan krishnamurthy

Changing from 52 to 20
following effcets
See that all the PIR's are consumed before switch over.
Do you have any part of BOM items specific to sales order, if so need to be carefull about the consumption...may have to plan sme stock before switch over as in 20 and 52, the important difference is procurement before and after.
Usually in 20 VPRS condition type is anabled for costing if the product.
Mainly need to plan for sub assembly and component well in advance as change will definetely effect the procurement cycle and may end up with shoratge.

Unlimited Data Plan-Need to change my phone but don't want to lose!!

I am "grandfathered" into the unlimited data plan, we have four lines, I need to change my phone as my current one doesn't work. I tried switching to an old phone that I used 6 months ago with the unlimited data via online and it would not allow me to do so. How can I change to another phone without being told I have to buy a data plan? If we need to "buy a data plan" all 4 phones will be going else where....

Makes no difference about any tin foil hats, Verizon is using ANY MEANS to force unlimited data users off the unlimited and onto share or metered data. It is a fact. They tried twice with me and I pay full price for my devices.
1) Change your minutes, they want to take away your unlimited.
2) Buy a new device on subsidy, lose your unlimited data.
3) Buy a new device on the Edge program, lose unlimited data.
4) Swap a device on your account, they want to take unlimited away.
5) Add a prepay tablet to your account, they tell you that you lose Unlimited data.
However the instructions are you are prepaying for the tablet use so its billed to your credit or debit card yet not really part of your cell phone plan but they want you to lose unlimited.
In short if you go online or call on the phone or even chat, for any reason in some cases Verizon is removing your unlimited data. And you have to be careful since many here are stating the same as I listed.
They are a business, if they decided not to have unlimited data trust me it will be gone. So leave a little room in that tin foil so the broadcast will get through.
Just for a giggle, many many years ago I bought an unlimited Mobil Gasoline coffee cup. You paid for it once and each time you came to a Mobil station you get a free coffee. I still have the cups (they came in two sizes) yet just try and get that free coffee. The company dropped the promotion. And now you get arrested for theft.
Nothing lasts forever.
Good Luck

Need to change my payment plan

I need to change my payment plan and do not know how

Changing Account Information > http://support.apple.com/kb/HT1918
If necessary...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
Accepted forms of payment > http://support.apple.com/kb/HT5552

Hi i have an iphone 5 and i use iMessage to reach my contacts, 2 weeks ago i switched my plan so now i have no internet in my plan. Since i changed my plan i don't receive the messages other iphone users send me. what do i need to do to get all messages?

hi i have an iphone 5 and i use iMessage to reach my contacts, 2 weeks ago i switched my plan so now i have no internet in my plan. Since i changed my plan i don't receive the messages other iphone users send me. what do i need to do to get all messages?

iMessage requires data. You need to have an active internet connnection, either wi-fi or cellular. If you are not connected via wi-fi, then you would need a cellular data connection. If you do not have that, then you will not receive the iMessages. Either get the cellular data back, or remain connected to wi-fi, or you will have to disable iMessage and ensure that you have an SMS texting plan with your carrier.

I need to change the credit card and credit card holder of our monthly plans.. but i cannot find any billing button. could you kindly advise?

dear all
i need to change the credit card and credit card holder of our monthly plans.. but i cannot find any billing button.
neither can i find any support by adobe regarding invoicing issues.
could any of you help me?
thanks,
inga

Change of Credit Card information for creative cloud membership
1) Login to creative.adobe.com.
2) Click on the manage my subscription.
3) Edit my billing information
For Invoice
1) Login to adobe.com
2) go to my orders and select the order number and print the invoice from there

I had a replacement iphone 4 sent from apple through the service plan and now need to change carriers, orange dont now have my imei registered on their database and cant process the unlock can i unlock another way without jailbreak?

I had a replacement iphone 4 sent from apple through the service plan and now need to change carriers, orange dont now have my imei registered on their database and cant process the unlock can i unlock another way without jailbreak?

Hi philhardinges,
You can ask Apple support for the replacement receipt, this receipt would have the old iphone information(including Imei) and the replacement iphone information.
I had a problem like you and they sent me that information, then with the old imei you can unlock your iphone
Another way to take the old iphone imei, you can look for the original iphone box, yep, the one i hope you saved carefully somewhere in your house hahaha. The imei is showed on the bottom of the box down-right corner.
Hope this information can help you.
Best regards

WHY DO I NEED TO CHANGE DATA PLAN IN ORDER TO GET A NEW PHONE?

WHY DO I NEED TO CHANGE PLAN IN ORDER TO GET A NEW PHONE FOR A CHEAPER PRICE ?

You do not like the answer that is different then you being wrong. Everyone can think things about anything, but it is a black and white issue. To get a new cheaper phone, then you would have to change your plan.
<<Personal comments removed to comply with Verizon Wireless Terms of Service >>

MRP exception message 64 and planning strategy group 52

Hi Gurus,
I have done extensive search online in the forum to find the route cause why we are getting MRP exception message 64 for a specific material in one of our plants. This exception message does not occur for the same materials which is also produced in another plant.
I was just wondering whether the planning strategy group of 52 in MRP 3 view would have any effect on the frequent occurrence of exception message 64. I know that the 64 message occurs when the routing time is higher than the in house production time. If that's the case where to look for in routing to correct this, apart from this do we need to look at work centers and other details. I'm not a PP person but still was curious to know see if i could take a shot at it.
Also the MRP settings that we follow in the plant where this problem does not occur is NETCH, Create PR - 2, Schedule lines - 3, create MRP list - 1, Planning mode - 3, scheduling -2
in the plant where the 64 message occurs quite often is Netch, Create PR -2, Schedule lines - 3, create MRP list - 1, planning mode - 1, Schdeduliing - 1
I was thinking do MRP settings and planning strategy group would have any impact on why we are getting the 64 wexception message
Because of this 63 exception message, the downstream components are getting wrong signals.
Thanks
Ravi

Hello Ravi
Generallt, exception message "64 - Production finish after order finish" is triggered when the order start date is in the past and system automatically changes to forward scheduling to calculate the finish date.
Note 1913017 explains how the order basic date is calculated and adjusted in case of forward scheduling, however, you are using strategy 52 and this is a very special scenario, whever VP planned orders are generated.
The VP planned orders will always be adjusted to the requirements date even if the requirements date is in the past. This is a special feature in the planning segment, since these orders are only kind of 'virtual' planned orders. These orders only have to provide the demand requirements for the components in time.
Therefore, there is a relationship between strategy 52 (VP planned order) and the exception message observed.
BR
Caetano

Reg:Planning Strategy 40

Hi friends,
i need to know about planning strategy 40.
For EX:
1. suppose if we have planned and created PIR from january to march(quarterly plan) for any product, now if we want to change the plan how the system will behave..can we change the PIR which we have generated from JANUARY TO march.
If it is possible to chnage ,,how to change the PIR..what will be the impacts.
2' Can we create another PIR once again from january to march...or feB to march apart from existing PIR
3. suppose if i have created PIR from january to march , and splitted into daily plan, in between if the sales orders comes how this planning strategy 40 will behave.As it is make to stock.
For Ex:
We have planned 1000 numbers in the month of january, daily 50numbers production.
Suppose if we get sales order for another 2000 apart from our planning 1000numbers ,how this planning strategy will behave.
Thanks in addvance.

Dear
Planning startegy 40 works like follows :
It is basically Consumption of PIR not Reduction of PIR .
Example :Let say you have PIR for 1000 for January and it is appearing in MD04
Now you have sales order for another 2000 for same month .Here PIR quantity is less than the Sales Order Qty ! Now run MRP -MD03/MD02 -NETCH , 2,1,3,3,2 and check the Result .Here PIR will be vanished and PR/Planned of 2000PC will be appearing in MD04.So PIR is consumed by Sales Order .
Now you have PIR for 2000 and you have sales order for another 1000 for same month .Here PIR quantity is more than the Sales Order Qty ! If you goto MD04-Sales Order will not appear at all .That means Sales Order is geting fullfilled by PIR deamnd. Now run MRP -MD03/MD02 -NETCH , 2,1,3,3,2 and check the Result .Here Sales will be vanished and PR/Planned of 2000PC will be appearing in MD04.
Refer : Re: Industry wise planning strategy usage
Answer of your questions :
1.You can goto MD62-Change and add PIR questiy at Material level , Plan Numbers , Product Group Level
2.You can create but it will update th exsiting motnhly requirement in the same planning table in MD62
3.This question is answerd in the above explanation .
Hope it helps
Regards
JH

Cutover planning strategy doc

Does anybody have Cutover Planning/Strategy document for PI/XI? I do have the ASAP standard.. but I feel there must be one with lot of good information.. please send it to my gsvas81at gmail dot com

Hi,
We restricted from NEUPL................
When i have gone thru entire process my findings for this problem is as follows
1) When A planning strategy is changed in a plant?plants the existing/Pending PIRs need to closed or deleted. If there are any PIRs pending the system can not select new req Type automatically.
2) All the Depending requirements schedule lines and purchase orders for existing PIRs need to be closed before going to new Planning Strategy
If the user follows this procedure then the system will automatically uses "Control of Requirements Type Determination " and a required "Req Type" populates in user parameters. otherwise there will be planning inconsistency
Please correct me if i am wrong
Pavan

Planning strategy group

Dear Gurus,
Please elaborate the function & logic of planning strategy group used for production planning? How the alternate strategies works under main strategy?
Regards,
SAP CONS

Once Planning strategy is created , Then we need to assign planning strategy in Planning Strategy Group in IMG> Prdn> prdn planning> PIR> define strategy Group,
In Planning stratergy Group we can assign 1 main strategy and 7 alternate strategy.
Ex: If the same material is produced both MTS and rarely MTO means
Maintain a Main strategy as 10 and Alternate strategy as 20
Then when ever sale order comes System will take KSL is sale order, system will consider MTS as per Main stratergy
If you want to procure based on Customer for that Material Then Go to procurement Tab of sale order change the Requirement type as KE. and save, ( system will allow only KSL and KE based On streatergy Group, System will take deafult main stratergy, IF you want to change the stratergy got to sale order procurement tab, change the reqmt type)

Link between process order and sales order for planning strategy 52

Hello,
I investigate the possibility of a link between "sales order" and "planned order / process order" for the usage of planning strategy 52 (planning w/o final assembly, make to stock).
I know, this is not conform to the basics of planning strategies (EITHER make to order OR make to stock) and I suspect it would be a modification. Of course we have the alternative "make to order" - strategy 50, but we do not want to use individual customer stocks.
Is anybody there with similar customer requirements or project experiences?
Thanks in advance,
Joerg
Message was edited by:
Jörg Demtschuk

Hi Jorg,
To my understanding if you need hard pegging then in SAP only Individual requirement is possible.
Or else you need to create a custom transactions/table to identify Sale order and when ever a process order is created by selecting the sale order record, the process order detials should also get updated against that.
You need to take the help of ABAP expert for this,
Regards,
Prasobh
Reward points if this was useful

DS Planning Board Object Color Change according to Order Type etc.

Hi,
I want to differatiate the colors of the objects on the resource,
according to their certain propertis, for example order type,
But if they have the same status the sytem marks them on the same
color,
I went into the customizing for the BOARD Profile and color adjustments
but there are only certain criteria and I could not decide
which object type to which color,
Does anyone know anything about it?
Mehmet

Setting up the colour or Order (or actually Operations) can be quite a challenge.
Sugest you use the SAP standard, copy it and then change suitably.
Follow this in SPRO >> APO >> Supply Chain Planning >> PPDS >> DS Planning Board >> Maintain Planning Board Profiles
Here select the appropriate planning board profile, click on Chart. Select appropriate chart - like Operations chart will be a good choice.
Then double-click on the Decision Table for Graphical Objects, check the last mentioned Decision Group and Decisions.
That will have reference to Grpahical Object Id.
Pick up the Graphical Object ID and then double click Grpahical Elements from the left pane. Enter the Graphical Object Id (Planning Board Profile is already chosen).
Select the grpahical elements and click on the Detail button to see the Display Colour.
So if you need to change the Operations based on Order Type like Fixed, Deallocated, Created etc. then change the colour of the graphical object here.
Somnath

BPS planning strategy need to change

Similar Messages

Maybe you are looking for