BPS - PS Retraction with Network and Activity

Hi,
In BPS I have a retraction function for PS at WBS Element level, and it's runs ok. Now, we will enhacement the planning level with network and activity. Is posible to retract the data to R/3 at this detail level (network and activity)?
Thanks in advance.

Hello Ivan,
see SAP Note <a href="http://service.sap.com/sap/support/notes/503399">503399</a> and online documentation of function module
UPB_CI_PUSHBACK_PR (transaction code SE37).
Regards,
Marc
SAP Customer Solution Adoption (CSA)

Similar Messages

Problem with installation and activation

Hi, I have a problem with the installation of Adobe Muse.
I had a free 30-days trial, when it was over I bought the product ($ 13 per month),
I installed the program again and I see the same window with the finished Trials
and it requires a serial number and does not allow to enter the program.
I installed the program on your PC wife without any problems, but I can not install it on a laptop.
I have a laptop with Windows 8 operating system.
What I've done:
1. Uninstalled the free program,
2. check the connection to the Internet,
3. has installed a new program from the official website adobe.com,
4. Remove the line for the activation of the hosts file and resave the file,
5. turned off the brandmower,
6. rebooted.
I can't get support for a 3 days, is it the most terrible support I've ever seen? I dunno
Please help me at [email protected]

I guess this stuff helps me
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
2014-08-07 20:07 GMT+07:00 Дмитрий Броский <[email protected]>:
thanx
>
2014-08-07 18:18 GMT+07:00 Prabhakar.Kumar <[email protected]>:
problem with installation and activation created by Prabhakar.Kumar
>> <https://forums.adobe.com/people/Prabhakar.Kumar> in *Help with using
>> Adobe Muse CC* - View the full discussion
>> <https://forums.adobe.com/message/6619532#6619532>
>>

Since I upgrade my iphone 3gs to ios 5.1, I have several problems with network and wi-fi, any solution?

Since I upgrade my iphone 3gs to ios 5.1, I have several problems with network and wi-fi, any solution? (No jailbreak)
Most of the time the iphone cannot reach any network and when it can, there is no data transfer, I can only make calls and sms.

Skizofrenias wrote:
Since I upgrade my iphone 3gs to ios 5.1, I have several problems with network and wi-fi, any solution? (No jailbreak)
Most of the time the iphone cannot reach any network and when it can, there is no data transfer, I can only make calls and sms.
iOS: Troubleshooting Wi-Fi networks and connections
iOS: Wi-Fi or Bluetooth settings grayed out or dim

How can i disable 3G network and active 2G network in ios 8 same like ios 7.1.1

how can i disable 3G network and active 2g network in i0s 8 as same like 7.1.1. cz there as a so much consumption in battary

Same question since the only way to make calls where I am located is to disable 3G (the signal strength is much stronger without 3G)

Network and activity

Hi,
In case of network and activity system should automatically picked respG/L from PS Master (CN22)
Please suggest user exit or bapi/badi .
Regards,
Vivek

not ans

Restrict network and activity to be moved between WBS

Hi,
Can any one suggest which BADI i have to use to restrict the network and activity moved between WBS.
i have tried WORKORDER_UPDATE,WORKBREAKDOWN_UPDATE and PROJECTDEF_UPDATE
non of these BADI's are working.
thanks in advance,
regards,
rams

this depends on your requirement - what you have stated will work

A bug with flags and active view? Or is it a (bad) feature?..

As I mark an image in a folder view as flagged and then switch to a collection view and look on the same image, it's not flagged.
I expect, that information about marking the image as flagged remains on that image, not on a current active view.

It's as designed - Flags are local to a Folder/Collection.
>Or is it a (bad) feature?
It depends - some think it's a great and others hate it with a passion.

Report to check Standard WBS link to which standard network and activity

Dear All,
Is there any way or standard report to check standard WBS (cj93) link to standard network/activity (CN03).
Normally we create project by using template existing, we would like to check the structure. Is there any way to check the standard template for it ( WBS template link to network/activity template).
Thank you.
Nies

Hi,
Please try this:
1. Tcode : CN41
2. Change database profile: In that in the origin check mark the Standard structure. Continue..
3. At the bottom of the selection screen check mark the standard structures.
4. In the selction area for the Project hit F4 and select the project based on the standard WBS Element.
5. Exceute the report.
Hope this is useful.
Reward points if found useful.
thanks..

Create Activity with Campaign and Activity Result

Hi everybody!
I'm developing a report and I would like to create an activity in CRM passing values to field Campaign and Result (Activity Result).
Thanks in advance for your tips and suggestions..

You can do this with the CRM_ORDER_MAINTAIN FM. Sorry, but I do not know by heart where the two fields are stored, but if you like to know use CRM_ORDER_READ to access a known activity and check where your data is stored.
Hope this helps,
Kai

Problems with installing and activating and older version of Creative Suites

Hi. I'm using a MacBrook Pro with Max OS 10.6.8 and am trying to install an old version of Adobe Creative Suite (2 Premium) that I have. I got through the whole installation process yesterday, but was unable to activate it. I had to quit without going further. This morning, I read through the info that comes with the program and it looked like I would need to reinstall everything, because I stopped before activation. When I inserted the 1st disk, it did not load right and got stuck. I had to forcibly eject it. However, Disks 1-4 are still loaded on my computer. I have 3 questions:
Can the older programs no longer get activated?
If they CAN, how do I get from the info loaded under my Applications folder to the activation?
Alternatively, since I stopped before activation and hit "quit" rather than "cancel," do I have to start the whole process all over again from the beginning?
Thanks for any help you can give me!

Put your CS2 disks away (since they can no longer be used) and follow these instructions from Adobe
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3

Host Routing table empty, will not register with network and BIS

I wiped out my BlackBerry 9900 and thereafter, it gave me an error code 507. I reloaded the OS through suggested software from the Blackberry Desktop device software and it was sussuccful. But since then, I could not surf the internet with my phone despite having BIS suubscription with my network provider (Glo Nigeria). I checked the Host Routine table and found it empty. I registered it several times and even removed the battery and replaced it, I also did network diagnostics test and didnt get any form of change. I called my service provider and they checked and confirmed that my SIM and subscription status is ok, I inserted my SIM card into another BlackBerry device and it worked well. I have tried different suggestions on the forum but non of them solved the problem. Please kindly assist me.
Solved!
Go to Solution.

I've seen this happen when people upgrade to 7.1.
Go back to OS 7.0
1. First locate your carrier and the OS file you wish to use.
http://na.blackberry.com/eng/support/downloads/download_sites.jsp
2. It doesn't hurt to do a manual backup of your device first, using Desktop Manager > Backup. Close Desktop Manager upon completion and unplug BlackBerry. You can get BlackBerry Desktop Software here http://us.blackberry.com/apps-software/desktop/
3. Download the OS file from step 1 to the PC then install it to the PC by running (double clicking) the file you downloaded.
4. Go to c:\program files\common files\research in motion\apploader and delete the file named "vendor.xml." Also check the following locations for vendor.xml files and delete any instances of the file:
On Windows Vista/7 navigate to C:\Users\YOUR_USER\AppData\Roaming\Research In Motion\BlackBerry\Loader XML (Where "YOUR_USER" is your username)
On Windows XP navigate to C:\Documents and Settings\YOUR_USER\Application Data\Research In Motion\BlackBerry\Loader XML (Where "YOUR_USER" is your username)
5. If you're simply updating the OS to a newer version skip this step. If doing a clean OS reload use BBSAK from BBSAK.org and wipe the device (after doing a complete backup) then after you get the error 507 (no OS installed) then proceed to next step.
6. Plug in BlackBerry and double click on "Loader.exe." It's located in c:\program files\common files\research in motion\apploader
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

K9A2 Platiunum - 'weird' things with Network and USB are happening...

Hi All,
My System specs are:
MSI K9A2 Platinum MB
OCZ Technology 2x2GB 240DIMM PC2-6400 Gold running at 2.2V
AMD Phenom 9500
2 x Samsung SATA DVD Writer SH-203B/BEBN
GeForce 8800GTX 768MB PCIE DVI
Coolermaster Cosmos case
Seagate 320GB SATA2 HDD ST3320620AS
OCZ 1010 GameXstream PSU
OS: Vista Home Premium 64
It was quite a task getting this machine working in the first place (see my previous threads) but I have a residual issue here that I would like to put to you and see if anyone has any ideas:
1) I noted that there seems to be something 'wrong' with my Network connection as a) my internet was very unstable on this machine ("no cable plugged in / no connection" messages) from time to time. No pattern detectable, seems to have "gone away" now; and b) my Belkin F5D7235-4 router gives me an 'amber' status light, instead of green, for the connection to the above machine. I changed the port at the router and also changed the network cable to a new one - the status light remains on amber.
Interestingly, the status light changes to amber only once the start-up process of the PC has progressed, it is 'green' when the PC is switched off.
2) A function of the above problem seems to be that I cannot get a network with my 2nd machine (XP SP2 based) going. I applied the patch that has to be applied when XP SP2 and Vista machines are in the same network. The two PC's saw each other once - and then never again.
3) Had a friend over and wanted to transfer 160GB from my external WD 1TB drive (connected through Firewire 800 to the K9A2 based machine) to his laptop via USB2.0, using my Vista / MSI K9A2 Platinum based machine (specs above). After minutes of calculating the estimated time remaining it came back to me with around "5 days 7 hours remaining". Cancelled and then used my XP SP2 based machine to perform the same task and I got "1 hour, 10 minutes remaining" and it actually got done done in that time.
Summary: I am asking myself if I have something set-up just completely the wrong way in my MSI K9A2 Plat based machine on the BIOS level regarding the on-board network card. If yes, what could that be? But then, on top, why is this really slow USB2.0 thing happening??
I am grateful for any ideas as I feel that I have not been able to get the top performance out of my PC yet.
Thanks to all of you for some thoughts...
Ciliax

Upgrade? Fresh installation on a newly formatted disk is to prefer.
This is little beside the point, but when installing Windows I use as little hardware as possible. It is much easier to add things afterwards than troubleshooting a complex coordination of things.

Acrobat 7.1 update over 7.0.9 with GPO and Active Directory

Hello all.
Our environment is Windows 2000 sp4 for clients and Windows Server 2003
We have been using two AIPs for Acrobat 7.0.9 (Pro and Standard) deployment, customized with Install Shield Tuner for Acrobat 7. When we patched them to v7.1.0 using the MSP file extracted from the exes released for this purpose, the resulting packages could not be marked for redeployment in the GPO. Facing this, we decided to add the new 7.1.0 packages as new packages under the same GPO. Under "Packages that this package will upgrade" appear all the previous 7.0.9 versions and surprisingly for Acrobat Standard appeared Acrobat professional 7.1 and we were unable to remove any them. For computers receiving for the first time the package everything is fine, they receive version 7.1 as expected, but for those which had any v7.0.9, even though the application event viewer says that the v7.1 is an upgrade over 7.0.9 and that v7.0.9 was removed and that the upgrade went ok, the help/about of the application still reports v7.0.9.
Have we done something wrong?
ps. for a while it seemed to work, but now it seems to be failing as reported above even though nothing that we could notice had changed in our environment.

I use a different version of Acrobat, so didn't pay much attention... but I do know this has been discussed before, with a solution
You might try various terms at the SEARCH link
http://www.adobeforums.com/webx?126@@.ee6b2f2
From what I do remember (as I said, no details) the solution was "something like"
1 - manually install the update from the download page
http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows
2 - turn Acrobat's automatic updating OFF

How to work with oracle and active directory...

Hi,
Can somebody let me know how do i configure active directory with oracle 10g?
I am trying to do this using configuration wizard but fields are grayed out for me to proceed. It also shows me to prepare active directory to work with oracle first.
How do i do that?
Can someone let me know the steps to do so?
Regards
Vikas

Depends on what you want to achieve?
Usually when you want Enterprise Users (users that are managed by a directory instead of a schema) you will perform other steps than in a scenario where you need some attributes from the AD.
cu
Andreas

User Authorization for Network and Activity

I have given WBS authorization according to the Person Responsible.
Further I want to control all networks & all all activities under that particular WBSE.
System is blocking the reqd. WBS but allowing to create/change all Networks & activitites under blocked WBSE.
RIYA M

Hi,
Networks / Activities have different authorization checks than WBS / project definitions. You can check them by work center or plant, but not by person responsible on superior element.
From what I've seen you will have to either use a different authorization check or develop the check as an enhancement.
Kind regards,
Neil

BPS - PS Retraction with Network and Activity

Similar Messages

Maybe you are looking for