BPS Retraction to R/3. (using BI 7)

Hi Gurus,
We have a requirement to build retractors from BPS to R/3. Its related to PS retractors and we would like to use the fields like version, fiscal year, period, Business Process Number, WBS, Amount. I was able to get some nice blogs and documents on retractors in sdn, but most of the information was for BW 3.x versions. I would like to know is there a diffrence while using BI-7 system. Please let me know your views and also if you have any documentations or links.
Appreciate your help....

HI CAN U PL. GIVE THE STEP BY STEP PROCEDURE TO PUSH THE DATA FROM BI TO R/3

Similar Messages

  • BPS Retraction for cost center accounting

    hi guys,
       When i create sender structure for retraction,need to specify the retraction target(eg UPB_RET_COPS) using drop down to find.But i can't find any value after using drop down button.So i want to know how  and where to define the retraction target,in BPS or R/3?
       The dictionary structure has the same problem.
       And what do mean the fields of 'offset'  and 'sender field lgth'?
       Need your help!
       thanks a lot!
    frank feng

    Hi,
    Go through following links where u can get a fair idea for u r problem:
    /people/praveen.mayalur/blog/2006/07/01/bps-retraction-for-cost-center-accounting--i
    /people/praveen.mayalur/blog/2006/07/11/bps-retraction-for-cost-center-accounting--ii-primary-cost-qty
    Thanks,
    Debasish

  • BPS retraction RFC destination conversion

    Hello everybody,
    I m surprised not having met a discussion about RFC destination conversion between systems for BPS retraction?
    What is the common recommendation for BPS retraction to have your customizing adapted and to retract to your QUAL R/3 from your QUAL BPS system without having to replicate your customizing with hard coded RFC destination to allow every BPS system to retract to any R/3 system !! Why this does not read the RFC conversion table from BW, probably too easy ?
    If you have feed back on this point I would really appreciate , many thanks .
    Laurent Allais

    Hello Laurent,
    I agree, it would be nice if the system would convert the RFC destinations. The functionality is just not there. You can use a single RFC destination for all systems and just have a different server that it is pointing to in SM59.
    Or you just make a change in BPS0 after the transport.  It's quite common for plan administrators to have access to BPS0.
    Regards
    Marc
    SAP NetWeaver RIG

  • BPS Retraction for Cost Center Accounting - Cost Element - Compounding with

    Hello everybody,
    I'm using the "BPS Retraction for Cost Center Accounting" described in the blog from Praveen Mayalur. I have customized the BPS system  (3.5) as described.
    But if i started the retraction i receive a dump. I have debug a little bit and i found out that there is a problem with the InfoObject "Cost Element". It is compounding with two InfoObjects "Source system ID" and "Controlling area".
    PERFORM FILL_RSRDEP USING I_AREA
                              I_CHANM
                              ITO_CHADEP
                        CHANGING LT_RSRDEP
                                 L_SUBRC.
    IF L_SUBRC NE 0.
    *Abhängige Merkmale müssen in der ITO_CHADEP stehen
      MESSAGE X099(UPC).
    ENDIF.
    Does anybody have this problem before. ?
    Regards Detlev

    Hi,
    it looks that your 0COSTELEMNT has been changed and the additional compounding object 0SOURSYSTEM has bben added. In BI Content it is only compounded to 0CO_AREA. So may be this is the problem.
    To be sure that it works you must make the change in your source system to and "compound" 0COSTCENTER to 0SOURSYSTEM. Or you have to chabge the retraction that way that it ignores the source system and only reads 0CO_AREA and costcenter.
    Regards,
    Juergen

  • BPS retraction of Quantity in CO OM not retracting at all !

    Hi everybody, I post after many and many trials.
    I am retracting Primary Costs ( we have planned on CostElements for CO-OM Internal Orders) and I followed the blogs etc. Everything is fine for the Amount and it retracts ok by Posting Period but the quantities are not retracting at all.
    I also fixed the Unit as H as suggested because the quantity is in Hours and the R3 system expect that I retract hours for the CostElement related to Cost of Personnell.
    I don't move out from this position since long and I should deliver the project in 10 days .
    Any help is really really welcome.
    I used CCA retractor. This is the Parameter Group
    Retr. R/3 comp.          7
    Controllo retrattore          4
    Registrazione Delta          0
    Strutt. mitt.          UPB_SND_COPS
    Destin.          SVI100CDV
    Sess. test attiva          0
    VersioneR/3                                                           
    Att. registrazione          0
    Controlling area          01
    Voce di costo          02
    Tipo voce di costo          03
    Edited by: Walter Cista on Oct 26, 2008 10:04 PM

    Hi Marc,
    first of all my personal compliments because very often I follow your posts .
    Your answer let me "smell" the right way . Before to post I already debugged the retraction but at first look, if you don't feel that also somebody else found mistakes you can debug for hours and all looks fine. So this time I debugged with more attention and I found something strange in the Unit of Measures. In R3 the Cost Element expect H as Hours but in the RFC was going the quantity without the Unit of Measure. As I remember also in the blog about retraction the author said to take care about UOM. So I checked better Retraction about UOM and I found a OSS note . Anyway if this thread can be of help, I put here the list of OSS notes to be checked.
    The system where I work is always updated but I remember that sometimes especially in some cases where you miss some PIns or for many other reasons, (not good upgrades for example) the system in some part can remain not updated even if there are the proper HP.
    If I can help anybody with similar problems if JUST SEARCHING for  LUPREF02 in OSS NOTES you will find many !!!!
    1. 0.310 FIN-SEM-BPS-PLA 810478 SEM-BPS: Retraction of prices 19.01.2005
    2. 0.310 FIN-SEM-BPS-PLA 769889 SEM-BPS: Retraction Statistical Key Figures: distribution 08.09.2004
    3. 0.310 FIN-SEM-BPS-PLA 758350 SEM-BPS: Retraction prim. costs w/ cost element category 42 20.11.2006
    4. 0.310 FIN-SEM-BPS-PLA 1167790 SEM-BPS: Overhead cost retraction for individual periods 09.05.2008
    5. 0.310 FIN-SEM-BPS-PLA 884002 SEM-BPS: Data retraction of cost element categories 28.09.2005
    6. 0.310 FIN-SEM-BPS-PLA 909715 SEM-BPS: Retraction Cost Center 04.04.2006
    7. 0.310 FIN-SEM-BPS-PLA 922925 SEM-BPS: Retraction: Activities w/ cost element category 43 10.02.2006
    8. 0.310 FIN-SEM-BPS-PLA 889634 SEM-BPS: Primary costs: Retraction with quantities 16.07.2007
    9. 0.310 FIN-SEM-BPS-PLA 769337 SEM-BPS: Cost center retraction: distribution of activities 11.05.2006
    10. 0.310 FIN-SEM-BPS-PLA 822937 SEM-BPS: Retraction CCA: Statistical key figure with activit 15.03.2005
    11. 0.300 FIN-SEM-BPS-PLA 683947 SEM-BPS: Retraction activity types: price indicator = space 25.11.2003
    12. 0.300 FIN-SEM-BPS-PLA 900145 SEM-BPS: Primary costs: Data retraction with quantities 31B 21.11.2005
    13. 0.300 FIN-SEM-BPS-PLA 676133 SEM-BPS: Retraktion Gemeinkosten mit Transaktionswährung 04.11.2003
    14. 0.300 FIN-SEM-BPS-PLA 984644 SEM-BPS: Data retraction: Cost element category not checked 04.10.2006
    15. 0.300 FIN-SEM-BPS-PLA 894896 SEM-BPS: Overhead retraction with unit of measure 16.07.2007
    16. 0.300 FIN-SEM-BPS-PLA 810129 SEM-BPS: primary costs retraction with transaction currency 19.01.2005
    17. 0.300 FIN-SEM-BPS-PLA 553999 SEM BPS overhead costs retraction: Performance 13.09.2002
    18. 0.300 FIN-SEM-BPS-PLA 632619 SEM-BPS: Cost center retraction: Cost element categories 24.06.2003
    19. 0.300 FIN-SEM-BPS-PLA 513859 SEM-BPS: Cost center retraction for activities/prices 19.04.2002
    20. 0.300 FIN-SEM-BPS-PLA 818278 SEM-BPS: Retraction of overhead costs with trans crcy 352
    21. 0.290 FIN-SEM-BPS-PLA 821476 SEM-BPS: Cost center data retraction w/ Public Sector 352 / 22.02.2005
    22. 0.290 FIN-SEM-BPS-PLA 928893 Overhead cost planning: Retraction with sender process 24.03.2006
    23. 0.290 FIN-SEM-BPS-PLA 542059 SEM-BPS Overhead cost retraction: Setting period interval 01.08.2002
    24. 0.290 FIN-SEM-BPS-PLA 777794 SEM-BPS: Retraction prices with equivalence number 09.06.2006
    25. 0.290 FIN-SEM-BPS 520746 SEM-BPS: Over heads data retraction with object currency < > 16.05.2002
    26. 0.290 FIN-SEM-BPS-PLA 957281 SEM-BPS: Overhead cost retraction: Capacities 20.06.2006
    27. 0.290 FIN-SEM-BPS-PLA 801572 SEM BPS: Retraction of overhead costs with price unit 14.12.2004
    28. 0.290 FIN-SEM-BPS-PLA 862202 SEM-BPS: Cost center data retraction: Variable price 3.5 14.07.2005
    29. 0.290 FIN-SEM-BPS-PLA 823498 SEM-BPS: Cost center retraction: Variable price 15.03.2005
    30. 0.290 FIN-SEM-BPS-PLA 859435 SEM-BPS: Cost center retraction: Fixed and variable values
    31. 0.290 FIN-SEM-BPS-PLA 821472 SEM-BPS: Cost center retraction with Public Sector 352 / 3 22.02.2005
    32. 0.290 FIN-SEM-BPS-PLA 782320 SEM-BPS: Cost center data retraction with public sector 29.09.2006
    33. 0.290 FIN-SEM-BPS-PLA 821475 EM-BPS: Cost center data retraction w/ Public Sector 352/ 2
    Kind regards
    If anybody can help with material, pdf or something on SEM-BPS BCS and CPM I can be contacted trough www.sembps.com (the site is still under development)

  • BPS Retraction to CO

    Hello could somebody help us?
    We have a BPS Model and we need to do retraction to CO in CeBe's .
    We have readen documentation about retraction but all process consist in to do retraction to CO in CeCO's. We wonder if is it posible to do retraction to CeBe's So Is it posible where can I get some information?
    Thanks 
    Rosa S.

    In BI Integrated Planning, no new retractors are shipped.
    In BI Integrated Planning, you can only use some of the retractors that are used in BW-BPS: you can use any retractors that work according to the pull principle (COPA and Public Sector) without changing them. Other retractors cannot be used directly in BI Integrated Planning; retraction is only possible using BW-BPS
    Hope it Helps
    Chetan
    @CP..

  • BPS - Retraction

    Hi everybody!
    I need some information / documentation about the retraction in BPS.
    Its all for the moment!
    Thank you very much!
    Javier.-

    Hello Javier,
    The following link lists all standard BPS retraction functions:
    http://help.sap.com/saphelp_sem320bw/helpdata/en/99/97157967e3440a94d199538959cd0b/frameset.htm
    A detailed documentation can be found in each planning application documentation (the following link is for the cost center planning application):
    http://help.sap.com/saphelp_sem320bw/helpdata/en/99/97157967e3440a94d199538959cd0b/frameset.htm
    Regards,
    Fred

  • Creating a planning layout in BW BPS(3.5 unicode) and use it in crm 5.0 ?

    How can i create a planning layout in BW BPS(3.5 unicode) and use it in crm 5.0 ?
    Any thoughts how to do it please.
    Regards,
    Rao

    Inform me if i am getting it right...
    Step 1 : You are loading data for 2007 for example, do the distributions, everything is ok.
    Step 2 : You are loading data for 2008, do the distributions, the data from 2007 are distributed too.
    If this is the case just create a data slice gor 0fiscyear, to restrict the data to be affected by the planning functions.
    Or is the Step 2 is that you are loading extra data for 2007 ?
    regards

  • BPS Retraction for PS Master Data

    Hi,
    We want to use BPS and be able to create PS Master data (project IDs) in BPS. But at the same time, we want to be able to retract the new master data created in BPS. How can we reconcile the master data created in BPS with the one created in R/3? When the data is sent to R/3, is there a data integrity check? How can we complete the master data in R/3 knowing that only 2 or 3 fields are posted in BPS.
    Any advice or inputs would be greately appreciated.
    Thanks,
    Patrick

    Hi Abraham
    Check this link
    http://help.sap.com/saphelp_47x200/helpdata/en/a9/8a853488601e33e10000009b38f83b/frameset.htm
    Thanks
    Bala

  • BPS Retraction in BI-7 System

    Hi Gurus,
    We have a requirement to build retractors from BPS to R/3. Its related to PS retractors and we would like to use the fields like version, fiscal year, period, Business Process Number, WBS, Amount. I was able to get some nice blogs and documents on retractors in sdn, but most of the information was for BW 3.x versions. I would like to know is there a diffrence while using BI-7 system. Please let me know your views and also if you have any documentations or links.
    Appreciate your help....

    Hi ,
    I need to retract data from BW-BPS 7.1 to SRM.I am new to BW
    (3 months experience)
    Can anyone send me documentation , links or steps by steps guide to explain how to do the link please?
    This a challenging task for me and I really need to do it at any cost at work.
    Thanks in advance for your help.
    My mail is [email protected]
    Nevil

  • BPS Retraction Issue

    Hello Experts,
    We are implementing IP for Cost Center Planning and we are using BPS for Data Retraction. Our requirement is to retract the data on monthly basis to R/3 system. We are facing a strange issue here. In parameter group setting we are using Delta Mode as 0 u2013 Delta update. But when we retract the data for given month, in R/3 data for particular month is being retracted properly but data for rest of the months is being cleared. E.g we have following data in R/3 and we are in the month of Feb And we are retracting data for Mar which has value of 150
    Jan u2013 100
    Feb u2013 150
    Mar u2013 200
    April - 250
    After retraction we have following values in R/3
    Jan u2013
    Feb u2013
    Mar u2013 150
    April u2013
    Any input regarding this is appreciated !
    - Prawin !

    Is the month restricted to march in the planning level/package?? Check the characteristic selections.

  • BPS retraction (CCA) - authorizations for background user (R/3)

    Hi,
    I'm  trying to retract plandata for statistical key figures from BW to R/3. During data retraction I get an error message in BW. The message is about missing authorities on R/3 side, but without any detailed information. We use the standard backround user for BW => R/3 RFC connections. So my question is, if the background user needs additional authorizations for data retraction? Are there any notes or documentation?
    Thanks for help,
    Tanja

    Hi,
    I remember having faced this issue...
    I fixed it by creating a RFC connection for the retraction itself connecting with a service user (S_BWRETR) having profiles SAP_ALL, SAP_NEW.
    hope this helps...
    Olivier.

  • BPS retraction part for Cost center accounting

    hi All
            Can any body help me regarding the retraction part for cost center accounting bw-bps, how the retraction is exactly done . when part is where the data
    comes sits in bw and R/3 .
    how exactly plan data sits in r/3 what is the relation
    while extrating the data into the bw, what is procedure for extracting in to the transactional cubes
    prs

    This post could give you some info:
    CCA Retraction with BW BPS
    Hope it helps.
    Regards

  • Locking problem in BPS solution not getting solved  using RSPLSE. SEM_BPS_S

    Can anyone tell me exactly what "rsplse" offers to solve locking in BPS?
    We have made correct selection of characteristics (in our case "costcentre" infoobject) in tab "Lock characteristics" , but still when two people are trying to access (write) data in the same transactional cube against the different cost centres, the system is throwing an error message Cube “zIC_ccp” is locked by username.  (Or if a single person is using the two packages simultaneously using  two web sessions , he is getting the same error. )
    Our assessment is that he should not be facing this locking problem because cost centres here are acting as a “key” to different selection as configured in “rsplse”. 
    Can anyone tell me how to use parameter SEM_BPS_SAVE_UNLOCK. I want to know t. code and other t . code and other details to execute SEM_BPS_SAVE_UNLOCK.

    Hi,
    Please check the OSS note 635244.
      From the OSS note :
    <b> Notes on SET/GET parameters SEM_BPS_NO_LOCK, SEM_BPS_SAVE_UNLOCK :</b>
    These two parameters have nothing to do with the problem described above. They are only designed to facilitate the Customizing process, if users carry out Customizing in t ransaction BPS0 within a project.
    <b>SEM_BPS_NO_LOCK:</b> This parameter has the effect that transaction data is not locked at all. Never use this parameter in a production system. As of Support Package 14 for Release 3.1B, parameter SEM_BPS_NO_LOCK is released by an additional switch in table upc_dark2: For this purpose you have to maintain a record with param = ENABLE_NO_LOCK and value = X in table upc_dark2. Only then the system includes parameter SEM_BPS_NO_LOCK. The parameter can then be useful if you want to test functions or the manual planning with 'test data' in Customizing.
    <b>SEM_BPS_SAVE_UNLOCK</b>: This parameter only works in transaction BPS0; it has the effect that the system unlocks data (if possible) after it has been saved. Therefore, the system only simulates an exit and reentry in transaction BPS0 with the last active detail application. Therefore, the above parameter can be helpful if many people work on Customizing in transaction BPS0, because objects can be unlocked earlier.
    Regards,
    Siva.

  • BPS Retraction - Tables in R/3

    Which are the tables in R/3 populated by the standard retractors available in BPS?
    Cost Center Retractor
    1. Cost Center Accounting
    2. Internal Orders
    3. Activity Based Costing
    4. Project System
    Project System Retractor
    Investment Management Retractor
    Appreciate your answers and feedback. Thanks!

    Hi
    Investment Planning  retractorwrites on R/3 table PRPS , IMAK, and IMPR (if my remember is right)
    Get a look at se37 --> fm UPB_CI_PUSHBACK_PR for the pushback of WBS elements
    Hope it helps
    Andr

Maybe you are looking for