BPS statistics - can be left activated?

Hello experts,
If I activate the statistics for BPS performance and statistics collection, should I turn it off or leave it running so that performance statistics are not lost for future time periods?
regards,
Adette

Adette,
there are two types of statistics. BPS statistics and application statistics.
Typically, BPS statistics are left on all the time. Use them for performance analysis. But they are also handy as an audit trail of what users have done. Over time you can delete those stats using BPS_STAT0 transaction (delete button).
The application stats can be evaluated in transactions STAD and ST03. They are very detailed but roll-up in regular intervals (if basis jobs are scheduled correctly). So it's not a problem to keep them on as well. Personally I have used them only on an exception basis.
In general, there can be an impact of 0.3 sec when you leave the stats on. So if users are worried about that difference, turn them off.
Regards,
Marc
SAP NetWeaver RIG

Similar Messages

BPS Statistics on web pages

Hi,
When you look at the BPS statistics, you can find detailed information on the function/planning layout executed. However, if the users use a web interface, all these details are not available.
Does anyone know a way of finding who executed which function and how much time it took thru the web ?
Thanks

Hello,
Could someone help me to understand how to collect precise BPS statistics on BI7.0 (specifically with BIA in place)?
RSDDSTAT (OLAP='007' for BPS in the past) is not populated anymore.
Any hint will be appreciated.
-Vitaliy

Why my iphone's iMessage and Facetime can't be activated?

hi, I just bought an iphone4 from the Mississauga apple store two days ago, the iMessage and Facetime can't be activated, so these things are what I tried: (my SIM card matches with my iphone, have a valid carrier, and I paid my bill and have a valid phone number)
1. I connected my iphone to the wifi, and make sure it works,
2. created an account on apple store, and make sure it has been logged on,
3. logged that e-mail account that I used to creat apple account on to my iphone ---> Mail,
4. go to Settings ---> iMessage, and turned it on, and did whatever it told me to do, then it just saying:"Waiting for activation..." for 2 or 3 hours, and told me that activation failed, and the same thing goes with the Facetime.
I tried with each of them 3 times, none of them are working, so I give up, and asked my friend use to working at the ginues bar in an apple store to help me, so:
He download iTunes onto my PC, connected my iphone to my PC, and logged my apple account onto iTunes, then did the PC and iphone thing which I don't really understand, and redo what I did above, and my iMessage and Facetime still can't work, and use he's iphone to call mine with facetime, use mine to call his with facetime, none of the calls worked.
At the end, we even dialed #*5005*7672# to check the SMS service centre number.
***BTW, I CANNOT even send text messages to my friends, I can only call them.
Is there anything else I can try to make the iMessage and facetime working? Or should I just go to the store and ask for an exchange or refund?
T_T, I just can't believe I can't even send out text messages with the iphone which even the unsmart phones can do.
Help me, plzzzzzz
Kate

Hey Bogdannae,
Thanks for using Apple Support Communities.
You might need to user recovery mode since it is staying at the Apple logo.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Have a nice day,
Mario

Sort Key .... where we can see the activity in GL, Vendor, Customer mater

Hi gurus,
what is the use Sort key,
where we can see that activity. in GL Accounts, Vendor, customer master sort key where we can see effects. what is the use, how it will sort, where i can see.
Thanks for your reply.
Anil

Dear Anil,
Sort key is the one that fills the "Assignment field" of a line item automatically.
For example, for the GR / IR accounts, we normally give the "Purchase Order" as the sort key. This will make the line items in the GR/IR account to be filled with the Purchase order and the Item number.
The automatic clearing (F.13) works with the assignment field. In case the net of two line items (Dr - Cr) is equal to zero and the assignment field of these two lines are the same, then the system will automatically clear these two lines. Hence "Sort key " fills the assignment field and is very useful in automatic clearing
regards
Venkatesh
Assign points if useful

Interface Manager Material Transaction can not be activated

Hi hussein,
One of the interface managers for INVENTORY module can not be activated.
I tried to activated it using:
Navigation: INVENTORY > Setup >Transactions > Interface Managers > Material Transactions
Goto Tools > Launch Manager > Submit Conc. program "Process Transaction Inferface"
Then after the job is completed, I checked the manager but it is still "inactive" status. :(
Its log says:
+---------------------------------------------------------------------------+
Inventory: Version : 11.5.0 - Development
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
INCTCM module: Process transaction interface
+---------------------------------------------------------------------------+
Current system time is 07-DEC-2009 14:57:19
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
Executing request completion options...
Output is not being printed because:
The print option has been disabled for this report.
+------------- 1) PRINT -------------+
+--------------------------------------+
Finished executing request completion options.
+---------------------------------------------------------------------------+
Concurrent request completed successfully
Current system time is 07-DEC-2009 14:57:21
+---------------------------------------------------------------------------+Please help.....
Thanks a lot
msk

Hi yxes;
Navigation: INVENTORY > Setup >Transactions > Interface Managers > Material Transactions
Goto Tools > Launch Manager > Submit Conc. program "Process Transaction Inferface" Related Cm is Up? If yes please follow below and see its helpful:
The print option has been disabled for this report.
Regard
Helios

How can we achive active/active cluster setup with Oracle

Hi Experts,
How can we achieve active/active database setup with oracle WITHOUT USING RAC.. As far as I know it's impossible (unless I'm wrong)..
We are using Oracle 11.2.0.1 64bit on Windows 2008 server. We deployed Oracle FailSafe but that's more of an active/passive solution based on a windows cluster.
The other solution we were thinking about is to use DataGuard and replication.. two servers.. the oracle instance running on one server generating logs, and the other server receive the logs and apply them to the physical standby db.. Still, this is not a real active/active setup.
So, is it possible to run 2 servers in an active/active cluster and have the oracle database in an active/active setup or have the instance running on multiple nodes (at the same time)?
Thanks

Let me give you a brief explanation of what the situation is and you can be the judge..
My client have four databases with the smallest one being 20GB and the biggest around the 35gb (SGA 750mb to 1.4gb (Tiny by DB standards) and probably on a normal day, you can run all four of them on a decent desktop).. The DBs are used to keep track of people information. Through out the year, the databases are almost sitting idle, and by idle I mean, the odd update here and there, the odd report..etc. No hard real processing of any sort. Two days of the year (end of year) we have all the operators consolidating records and what's not and they will be pounding away entering data and updating the tables - with hourly reports that goes to 3rd parties. The client expects a 99.99 up time and availability during those 2 days.
Now, tell me, How can I justify using RAC and spending hundreds of thousands of dollars in licensing and what ever extra costs introduced by the complexity of the environment for the above scenario knowing that I don't have any real use for RAC for 363 days of the year; and we MIGHT need it for 2 days of the year? This is the dilemma we're facing.
Thanks
Edited by: rsar001 on Sep 3, 2010 9:42 AM

Required asset fields can be left empty when created in a PR/PO

Dear all,
I'm facing the following problem: When I'm creating an asset in a PR/PO I have the possibility to leave some required fields blank.
This is what I'm dong: transaction ME51N, choose multiple account assignment and in the bottom screen I create a new asset. In the next pop-up screen (asset master data) some data can be entered (e.g. cost center, location,...) but in our system the field 'capital investment order' is also set as required. Nevertheless it is possible NOT to enter a value in this field (one has to click the butten 'additional data' to be able to enter a value there) and still create a new asset. Furtheron, when working with this asset the system will issue messages because this asset is incomplete.
Can someone tell me if this is a system error because it doesn't seem logical to me that required entries can be left blank.
Thanks in advance.
Hans

Hi,
transaction AUVA (Report RAUNVA00) will list all of your incomplete Assets.
Incomplete Assets can be created in 2 ways:
1. Using a "froreign" transaction like ME51N. Asset creatin from those transactions is not 100% connected to the master record rules, as you may have noticed yourself. You can create the asset, however, it is marked as incomplete. Only the depreciation key is mandatory when creating assets in "foreign" transactions, the rest is not checked against the master record rules so it is very easy to create incomplete asset masters. See also OSS note 178533 on this.
2. Using the regular transaction(s) like AS01 - if after the asset was created, the rules have been changed, like, a certain field which was optional originally and left blank upon creation, now becomes mandatory. The result is again an incomplete asset.
Until the next depreciation run, but latest before the next year change in fixed assets, you have to add missing information to the master records listed in AUVA.
Hope that helps, points welcome
Csaba

Can't Left Click in Flash Player Settings Panel - HELP PLEASE

Hi and thanks for taking the time to read this. Believe me it is a fraction of the time I have wasted trying to resolve this issue.
Basic problem is:
I am trying to stream to Ustream but since downloading AFP11 for my Windows PC when I open the Flash Player Settings panel i can't left click on anything. It is set to deny but I can't click allow, or close or any of the icons.
Right click does work.
I have followed countless instructions in other forums from other posts that have encountered the problem on Mac and older versions of AFP but as yet none of the solutions have proven succesul.
I have tried all of the following but nothing has resolved the problem.
1. Uninstall and reinstall Adobe Flash Player (although this is impossible using Google Chrome) and restart computer.
2. Unistall flash and install older version. (made no difference on Google Chrome and on IE8 had no flash whatsoever).
5. Uninstall older AFP and reinstall AFP11.
4. Uninstall Google Chrome and restart computer.
5. Uninstall QuickTime (I got this off http://www.techsupportforum.com/forums/f10/flash-player-not-working-properly-please-help-1 61552.html) and restart computer
6. Last resort use keyboard shortcuts such as tab, enter and ctrl+arrows. This either didn't highlight the panel at all or if it did I still couln't select allow, or close the panel itself so was no help either.
So now I'm back to square one.
Now here's a really bizarre thing... I am using a shared laptop computer and if I use my colleagues profile where she hasn't updated her AFP to Adobe Flash Player 11 the settings panel is responding just fine. IT'S THE SAME PC!
I know I am alone with this problem but someone out there has an answer. If you can help please let me know how to fix this problem where I can't left click in the Adobe Flash Player settings panel.and I will be eternily grateful.
many thanks
nik

OK the amount I hate myself right now is more than a fat guy's self loathing for raiding the fridge at 2am for Pizza but less than an armed robber who's accidentally shot a pregnant woman in the stomach during a shootout. but not much less.
So after I had miraculously got the Flash Player Setting Panel to work again, (after deleting QuickTime and leaving the window open for abut an hour it just started working again) I then got enticed into downloading the ustream producer software.
While downloading it informed me that it would only work with QuickTime.
Stupidly and Optimistically hoping it would remove the need to use flash player altogether I downloaded and installed both.
I then discovered to my horror that Ustream producer is not a patch on Vidbalster and that it was not capable of delivering the same level of broadcast.
I then opened the flash player settings panel on ustream and... the problem has returned!
This means I am 99% sure that QuickTime IS the cause of the problem so I have uninstalled QT off the PC. I have also uninstalled Ustream Producer.
The thing is though, now no matter how many times I restart, or uninstall and reinstall Adobe, or Google Chrome, I am once again UNABLE TO LEFT CLICK IN THE FLASH PLAYER SETTINGS PANEL. AAAARRRRRGGGGHHHH!!!!
What did I do? I fixed it and f***ing broke it again!
Now it properly will not come back to life! the problem is not solved and i urgently need help.
Why does Adobe Flash Player Settings Panel and Apple QuickTime hate each other so much that they've got to ruin my life?
Help forum PLEASE!
Regards,
nik

TS1538 I updated my ipod and now it says my ipod can't be activated because activation server cannot be reached. How do I get it back on track?

I updated my ipod and now it says my ipod can't be activated because activation server cannot be reached. How do I get it back on track?

Hello,
Try reseting your device.
Hold the power button and the home button down until the device shuts off, then power it back on and see if the problem is resolved.
I just refreshed your post, so if this does not help you, it is now at the top of the list for a short while, other people should be able to try and help you.
~Lt. Leviathan

Can Appletalk be active on two network ports for printing?

Here's the core of my question: Can I keep Appletalk active on my Airport network port (in order to print to a wireless print server on an HP Laserjet 2100M) and simultaneously keep it active on my Ethernet port (in order to print to a Brother HL 2700CN networked through my router)?
Nothing I have read gives me to believe I can have Appletalk active on more than one network port. If that is the case, my second question would be:
I there some other way to print to either printer on the network without having to turn off Appletalk manually on the ports not being used?
Here's the configuration I'm facing
G4 Quicksilver 10.3.9
HP Laserjet 2100M with wireless Belkin DP-311P print server
Brother HL-2700CN wired to Belkin Wireless-G router
I would appreciate any help on this, even if it's the simple response, "No, you can't print to both without manually de/activating Appletalk."

for file sharing between computers running 10.4.x and 10.3.x.
actually, not for that either. 10.4 has dropped support for AppleTalk-only File Sharing to make way for Intel Macs and their protocols. 10.4 does still support AppleTalk printing.
AppleTalk would be required to print to older Apple LaserWriters that do not support LPD/LPR printing. In all but two cases, the printers have no Ethernet port, so a Bridge device or software would be required:
Personal LaserWriter NTR
Personal LaserWriter 320
LaserWriter Select 310
LaserWriter Select 360
LaserWriter 4/600 PS
LaserWriter IIf
LaserWriter IIg (Ethernet)
LaserWriter Pro 600
LaserWriter Pro 630 (Ethernet)
Some third-party wireless Access points do not pass AppleTalk packets at all, and cannot be used to print to that class of older LaserWriters.
In 10.3.9 and previous, AppleTalk may still be used for File Sharing with older Macs.
Q840AV,5500,G3 AIO,G3 B&W,G4/867 Other OS and 9.2, 10.3 and Server - LW IIg, LW 4/600, ATalk ImageWriter LQ

Personal File Sharing can't be activated

Hi all,
Just got a Macbook and try to connect with a G4 MDD together with a wireless router. I found that the personal file sharing setting in preference in G4 can't be activated. It stays "starting up" status forever. However Bonjour is fine: my Macbook can share the iTune library, printer sharing is fine, windows sharing is fine too. And the G4 can share Macbook's folders. Have tried reset PRAM, reset PMU, runs Disk Utilities but still no use. Any idea?

Before you go the "archive and (re)install" route, try just reapplying the OS 10.4.11 combo update for PPC and see if that fixes you up. Just as the knowledge base article recommends, run Disk Utility first to verify disk (to make sure it is not in need of repair before you start), then run repair permissions. Then, after done with either the "archive and install" or the "combo update", rerun repair permissions again.

Can't left click on certain folders in iTunes

WIndows 7, iTunes 10.5, iOS 5, iPhone 4
I cannot left click on certain folders in iTunes, such as Music, Movies, any of my Playlists, etc. If I left-click on them I see a red circle with a diagonal line through it. I have to right-click on it first, dismiss the pop-up window and I can access it fine.
This behavior is not exclusive - I can left click on some folders, like Apps, Ringtones, etc. Also I can left click elsewhere in iTunes like the menus at the top (File, Edit, View, etc.). I can also left-click elsewhere in Windows just fine.
Any ideas

Having the same problem with a windows computer.I can only click with the right button on the top folders. The lower folders like playlist work perfectly. I uninstalled Itunes because it had gone through an update and thought that a line of code or directory was missing but the problem persisted.
I have had no poblems with any of my macs which are all new however, when I launched Itunes which had just been updated on those machines, my macbook pro froze.
Looking for a fix...please help

Is there any succesful answer to the many questions about not functioning wifi after installing mountain lion? Also when awakes after sleep MB frezees, wifi can´t get active, dock does not show, in general MB does´t respond. All this in mountain lion.

When awakes after sleep MB frezees, wifi can´t get active, dock does not show, in general MB does´t respond. All this after I installed an update of mountain lion.

Try starting up in Safe Mode and see if things are better.
http://support.apple.com/kb/ht1455

How can I get Activity Monitor to work?

I've searched the discussions to no avail, so I have this question: how can I get Activity Monitor to work? It launches and its window opens but then the spinning beachball appears. I've checked the Console and it shows that the Activity Monitor is attempting to fully launch but then it "exits" and then it tries to fully start up again, goes into an infinite loop or something. Issued a "force quit" succesfully. I've deleted the Activity Monitor's .plist, no joy. What to do? Thanks!
I'm running 10.6.8 on a MacBook Pro (late 2011)

I wish I could be more positive but I have no experience of MacBook Pros and whether their demands on the system differ from my simple iMac. If you have the time to scour through 'More like this' ( to the right of your initial post) and the links within it, you may find leads.
I also found this thread via Google which in parts seems to echo your troubles. I hope it helps; thank you for the star.
Activity Monitor Not Responding - MacRumors Forums
71
Message was edited by: seventy one

OSX 10.6.8 Firefox 30.0 can't open images from google image search results I can't left click on a google image search result to open the image.

OSX 10.6.8 Firefox 30.0 can't open images from google image search results
I can't left click on a google image search resultt to open the image. This works fine on Safari so is not a mouse issue. When I tried to ask this question in Firefox when I left clicked on the ASK THIS button nothing happened
Originally posted in OS section - Sorry

Do you otherwise have problems with the mouse in Firefox?
You can try these steps in case of issues with web pages:
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox > Preferences > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox > Preferences > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

BPS statistics - can be left activated?

Similar Messages

Maybe you are looking for